summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-05-03mmci: fix crash with debug enabledRabin Vincent
If MMC debugging is enabled, the mmci driver oopses because the DBG macro uses host->mmc before it is set. Set it earlier. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03sdhci: catch ADMA errorsPierre Ossman
We forgot to add the ADMA error bit to the list of data interrupts. Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03mmc: increase power up delayJosé M. Fernández
The TI controller on Toshiba Tecra M5 needs more time to power up or the cards will init incorrectly or not at all. Signed-off-by: José M. Fernández <josemariafg@gmail.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03sdhci-pci: bad error handling in probe functionDan Carpenter
The goto unmap is too early, we haven't allocated host or done the request_region(). Found by smatch (http://repo.or.cz/w/smatch.git). [ Second error path fix by Pierre Ossman ] Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03mmc_block: be prepared for oversized requestsPierre Ossman
The block layer does not support very low sector count restrictions so we need to be prepared to handle bigger requests than we can send directly to the controller. Problem found by Manuel Lauss. Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03Merge branch 'v2630-rc3-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-cd: fix REQ_QUIET tests in cdrom_decode_status Fix up trivial conflicts in include/linux/blkdev.h
2009-05-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail davinci: DM644x: NAND: update partitioning davinci: update DM644x support in preparation for more SoCs davinci: DM644x: rename board file davinci: update pin-multiplexing support davinci: serial: generalize for more SoCs davinci: DM355 IRQ Definitions davinci: DM646x: add interrupt number and priorities davinci: PSC: Clear bits in MDCTL reg before setting new bits davinci: gpio bugfixes davinci: add EDMA driver davinci: timers: use clk_get_rate() [ARM] pxa/littleton: add missing da9034 touchscreen support [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol ...
2009-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (53 commits) [SCSI] libosd: OSD2r05: on-the-wire changes for latest OSD2 revision 5. [SCSI] libosd: OSD2r05: OSD_CRYPTO_KEYID_SIZE will grow 20 => 32 bytes [SCSI] libosd: OSD2r05: Prepare for rev5 attribute list changes [SCSI] libosd: fix potential ERR_PTR dereference in osd_initiator.c [SCSI] mpt2sas : bump driver version to 01.100.02.00 [SCSI] mpt2sas: fix hotplug event processing [SCSI] mpt2sas : release diagnotic buffers prior host reset [SCSI] mpt2sas : Broadcast Primative AEN bug fix [SCSI] mpt2sas : Identify Dell series-7 adapters at driver load time [SCSI] mpt2sas : driver name needs to be in the MPT2IOCINFO ioctl [SCSI] mpt2sas : running out of message frames [SCSI] mpt2sas : fix oops when firmware sends large sense buffer size [SCSI] mpt2sas : the sanity check in base_interrupt needs to be on dword boundary [SCSI] mpt2sas : unique ioctl magic number [SCSI] fix sign extension with 1.5TB usb-storage LBD=y [SCSI] ipr: Fix sleeping function called with interrupts disabled [SCSI] fcoe: fip: add multicast filter to receive FIP advertisements. [SCSI] libfc: Fix compilation warnings with allmodconfig [SCSI] fcoe: fix spelling typos and bad comments [SCSI] fcoe: don't export functions that are internal to fcoe ...
2009-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the multi-touch (MT) protocol Input: add detailed multi-touch finger data report protocol Input: allow certain EV_ABS events to bypass all filtering Input: bcm5974 - add documentation for the driver Input: bcm5974 - augment debug information Input: bcm5974 - Add support for the Macbook 5 (Unibody) Input: bcm5974 - add quad-finger tapping Input: bcm5974 - prepare for a new trackpad header type Input: appletouch - fix DMA to/from stack buffer Input: wacom - fix TabletPC touch bug Input: lifebook - add DMI entry for Fujitsu B-2130 Input: ALPS - add signature for Toshiba Satellite Pro M10 Input: elantech - make sure touchpad is really in absolute mode Input: elantech - provide a workaround for jumpy cursor on firmware 2.34 Input: ucb1400 - use disable_irq_nosync() in irq handler Input: tsc2007 - use disable_irq_nosync() in irq handler Input: sa1111ps2 - use disable_irq_nosync() in irq handlers Input: omap-keypad - use disable_irq_nosync() in irq handler
2009-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix oops in hid_check_keys_pressed() HID: fix possible deadlock in usbhid_close() HID: Fix the support for apple mini aluminium keyboard HID: Add support for the G25 force feedback wheel in native mode HID: hidraw -- fix missing unlocks in unlocked_ioctl
2009-05-02ibft: fix the display of a few fields in the NIC attribute structure in sysfsAshutosh Naik
Fix the display of a few fields in the iBFT NIC attribute structure in sysfs. Ensure that, if the DHCP IP address and the subnet mask for the interface is present in the iBFT NIC structure, the corresponding entries are created in sysfs tree for the device. This would hence create the additional entries in the tree based on the iBFT table and would not delete any existing entries. Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com> Cc: Vishnu V <vishnu@chelsio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02vgacon: return the upper half of 512 character fontsStefan Bader
Uwe Geuder noted that he gets random bitmaps on a text console if he tried to type extended characters (like the e acute). For him everything above unicode 0xa0 was corrupted. After some digging there seems to be a little culprit in vgacon since the beginning of ages (well git). The function vgacon_font_get will store the number of characters correctly in font->charcount but then calls to vgacon_do_font_op(..., 0, 0). Which means only the lower 256 characters are actually stored to the fontdata. The rest is left untouched. So the next time that saved data is used, the garbled font appears. This happens on every switch between text consoles. Addresses https://bugs.launchpad.net/ubuntu/+source/linux/+bug/355057 Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Tested-by: Uwe Geuder <ubuntuLp-ugeuder@sneakemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02CRISv10: fix serial driver proc-usageJesper Nilsson
drivers/serial/crisv10.c:4428: error: unknown field 'read_proc' specified in initializer Commit 0f043a81ebe84be3576667f04fdda481609e3816 ("proc tty: remove struct tty_operations::read_proc") removes the read_proc entry from struct tty_operations. Rework the proc handling in the CRISv10 serial driver to use proc_fops instead. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02ne2k-pci: Do not register device until initialized.Lubomir Rintel
Doing it in reverse order causes uevent to be sent before we have a MAC address, which confuses udev. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-02acpica: validate package element more carefully in ↵Robert Moore
acpi_rs_get_pci_routing_table_length acpi_rs_get_pci_routing_table_length is not performing sufficient validation on the package returned from _PRT. It assumes a package of packages and fails/faults if this is not the case. We should validate each subpackage when extracted from the parent package, and not accept objects of the wrong type, since that will just cause the scanning to fail (likely with a kernel oops). This can only happen with a serious BIOS bug, and is accompanied by a warning something like this: ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-01virtio_net: Fix function name typoAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01virtio_net: Cleanup command queue scatterlist usageAlex Williamson
We were avoiding calling sg_init* on scatterlists passed into virtnet_send_command to prevent extraneous end markers. This caused build warnings for uninitialized variables. Cleanup the code to create proper scatterlists. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01bonding: correct the cleanup in bond_create()Jiri Pirko
This patch makes the cleanup in bond_create nicer :) Also now the forgotten free_netdev is called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01smsc95xx: add support for LAN9512 and LAN9514Steve Glendinning
LAN9512 and LAN9514 are USB hubs with an integrated 10/100 ethernet controller. Logically this looks like an ethernet controller (similar to LAN9500) permanently attached to one of the hub's downstream ports. This patch adds the usb device id of the new ethernet controller to the smsc95xx driver. This id is the same in both new devices. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01smsc95xx: configure LED outputsSteve Glendinning
SMSC LAN9500 has dual purpose GPIO/LED pins, and by default at power-on these are configured as GPIOs. This means that if LEDs are fitted they won't ever light. This patch sets them to be LED outputs for speed, duplex and link/activity. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01netconsole: take care of NETDEV_UNREGISTER eventBruno Prémont
When netconsole is loaded and a network interface fades away (e.g. on rmmod $interface_driver_module) the rmmod remains stuck and some locks are taken that prevent any additional module loading/unloading as well as interface up/down changes. In addition kernel logs (and console) get flooded at 10s interval with [ 122.464065] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 [ 132.704059] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This patch lets netconsole take NETDEV_UNREGISTER event into account and release the affected interface if it was in use. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01bonding: bond_slave_info_query() fixEric Dumazet
bond_slave_info_query() should keep a read lock while accessing slave info, or risk accessing stale data and corruption. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-02HID: fix oops in hid_check_keys_pressed()Jiri Kosina
If the device is not claimed by hid-input (i.e devices driver by userspace hiddev/hidraw-based drivers, or completely detached from HID and driver by libusb), we must not check the hid->inptus, as it is not guaranteed to be initialized, as this is performed only for devices handled by hid-input. Reported-by: Guillaume Chazarain <guichaz@gmail.com> Tested-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-01cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand ↵Sergey Senozhatsky
of ‘!’ Trivial: fixing gcc 4.4 compiler warning: drivers/net/cxgb3/t3_hw.c: In function ‘t3_prep_adapter’: drivers/net/cxgb3/t3_hw.c:3782: warning: suggest parentheses around operand of ‘!’ or change ‘|’ to ‘||’ or ‘!’ to ‘~’ Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01[ARM] S3C: Add UDIVSLOT support for newer UARTSBen Dooks
Add support for the UDIVSLOT register on the newer UART blocks which gives the capability of 1/16ths adjustment to the baud rate. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-30ide-cd: fix REQ_QUIET tests in cdrom_decode_statusBorislav Petkov
Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-and-tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect. V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM V4L/DVB (11570): patch: s2255drv: fix race condition on set mode V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error V4L/DVB (11561a): move media after i2c V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak V4L/DVB (11494a): cx231xx Kconfig fixes V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
2009-04-29mv643xx_eth: 64bit mib counter read fixLennert Buytenhek
On several mv643xx_eth hardware versions, the two 64bit mib counters for 'good octets received' and 'good octets sent' are actually 32bit counters, and reading from the upper half of the register has the same effect as reading from the lower half of the register: an atomic read-and-clear of the entire 32bit counter value. This can under heavy traffic occasionally lead to small numbers being added to the upper half of the 64bit mib counter even though no 32bit wrap has occured. Since we poll the mib counters at least every 30 seconds anyway, we might as well just skip the reads of the upper halves of the hardware counters without breaking the stats, which this patch does. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29mv643xx_eth: OOM handling fixesLennert Buytenhek
Currently, when OOM occurs during rx ring refill, mv643xx_eth will get into an infinite loop, due to the refill function setting the OOM bit but not clearing the 'rx refill needed' bit for this queue, while the calling function (the NAPI poll handler) will call the refill function in a loop until the 'rx refill needed' bit goes off, without checking the OOM bit. This patch fixes this by checking the OOM bit in the NAPI poll handler before attempting to do rx refill. This means that once OOM occurs, we won't try to do any memory allocations again until the next invocation of the poll handler. While we're at it, change the OOM flag to be a single bit instead of one bit per receive queue since OOM is a system state rather than a per-queue state, and cancel the OOM timer on entry to the NAPI poll handler if it's running to prevent it from firing when we've already come out of OOM. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-04-29V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.Devin Heitmueller
A regression was introduced in hg changeset 33810c734a0d, which resulted in a kernel panic whenever the device was disconnected from USB. The call to 4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a pointer to the v4l2_device instead of the au0828_dev structure. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual ExpressChristopher Pascoe
Two fixes for DViCO FusionHDTV DVB-T Dual Express: * Reset correct tuner when reinitializing xc3028. * Disable the I2C gate control to avoid locking up the I2C bus. Tested-by: John Knops <jknops@australiaonline.net.au> Reviewed-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au> Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PMSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11570): patch: s2255drv: fix race condition on set modeDean Anderson
set_modeready flag must be set before command sent to USB in s2255_write_config. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11568): cx18: Fix the handling of i2c bus registration errorJean Delvare
* Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11561a): move media after i2cGuennadi Liakhovetski
Currently drivers/media drivers are linked very early - directly after base, block, misc, and mfd and before ata, scsi, ide, input, firewire, usb, and i2c. This breaks static build of video4linux drivers, that use generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because during video4linux probing the v4l2-subdev core requires a struct i2c_adapter context, which cannot be satisfied before the i2c subsystem is initialised. Moving drivers/media after drivers/i2c fixes this problem. The best way to trigger action is by submitting a patch:-) So, let's see what comes out of it - on the one hand I don't see any reason why media has to be linked this early, and nobody was able to give me one yesterday as this problem has been discussed on linux-media, OTOH, maybe indeed it would be better to move i2c the whole way up above media, but that'd be much bigger of a change, I think. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-freeDan Carpenter
I lowered the kfree(t) down a couple lines and removed the superflous "t->vdev = NULL;" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leakDan Carpenter
I moved the kfree() down a couple lines. t->vdev is going to be in freed memory so there is no point setting it to NULL. I added a kfree(t) on a Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494a): cx231xx Kconfig fixesMauro Carvalho Chehab
selecting ALSA module breaks if !SND. Just remove select. While here, let's fix the whitespacing at the Kconfig. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29V4L/DVB (11494): cx18: Send correct input routing value to external audio ↵Andy Walls
multiplexers A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29HID: fix possible deadlock in usbhid_close()Oliver Neukum
This patch switches usbhid_close() from flush_scheduled_work() to canceling the outstanding work. This fixes a possible deadlock due to work taking the mutex usbhid_close() holds. Lockdep reported the problem. Signed-off-by: Oliver Neukum <oliver@neukum.org> -- Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-04-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) e100: do not go D3 in shutdown unless system is powering off netfilter: revised locking for x_tables Bluetooth: Fix connection establishment with low security requirement Bluetooth: Add different pairing timeout for Legacy Pairing Bluetooth: Ensure that HCI sysfs add/del is preempt safe net: Avoid extra wakeups of threads blocked in wait_for_packet() net: Fix typo in net_device_ops description. ipv4: Limit size of route cache hash table Add reference to CAPI 2.0 standard Documentation/isdn/INTERFACE.CAPI update Documentation/isdn/00-INDEX ixgbe: Fix WoL functionality for 82599 KX4 devices veth: prevent oops caused by netdev destructor xfrm: wrong hash value for temporary SA forcedeth: tx timeout fix net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE mlx4_en: Handle page allocation failure during receive mlx4_en: Fix cleanup flow on cq activation vlan: update vlan carrier state for admin up/down netfilter: xt_recent: fix stack overread in compat code ...
2009-04-29HID: Fix the support for apple mini aluminium keyboardUlrich Dangel
Quirks for the apple mini keyboard was recently added but keyboard was recognized as a powerbook keyboard. Adjusted boundary to the lowest product id for the apple mini keyboard to get the right translation. Signed-off-by: Ulrich Dangel <uli@spamt.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-04-29mtd: Bug in m25p80.c during whole-chip eraseSteven A. Falco
There is a logic error in "whole chip erase" for the m25p80 family. If the whole device is successfully erased, erase_chip() will return 0, and the code will fall through to the "else" clause, and do sector-by-sector erase in addition to the whole-chip erase. This patch corrects that. Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected to a 400 MHz powerpc. Increasing it allows me to successfully program the device on my board. Signed-off-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-28e100: do not go D3 in shutdown unless system is powering offThadeu Lima de Souza Cascardo
After experimenting with kexec with the last merges after 2.6.29, I've had some problems when probing e100. It would not read the eeprom. After some bisects, I realized this has been like that since forever (at least 2.6.18). The problem is that shutdown is doing the same thing that suspend does and puts the device in D3 state. I couldn't find a way to get the device back to a sane state in the probe function. So, based on some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe, I wrote this one for e100. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-28Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix up error path leak in i915_cmdbuffer drm/i915: fix unpaired i915 device mutex on entervt failure. drm/i915: add support for G41 chipset drm/i915: Enable ASLE if present drm/i915: Unregister ACPI video driver when exiting drm/i915: Register ACPI video even when not modesetting drm/i915: fix transition to I915_TILING_NONE drm/i915: Don't let an oops get triggered from irq_emit without dma init. drm/i915: allow tiled front buffers on 965+
2009-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/nes: Update iw_nes version RDMA/nes: Fix error path in nes_accept() RDMA/nes: Fix hang issues for large cluster dynamic connections RDMA/nes: Increase rexmit timeout interval RDMA/nes: Check for sequence number wrap-around RDMA/nes: Do not set apbvt entry for loopback RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n RDMA/nes: Fix fw_ver in /sys RDMA/nes: Set trace length to 1 inch for SFP_D RDMA/nes: Enable repause timer for port 1 RDMA/nes: Correct CDR loop filter setting for port 1 RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq() RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter mlx4_core: Fix memory leak in mlx4_enable_msi_x() IB/mthca: Fix timeout for INIT_HCA and a few other commands RDMA/cxgb3: Don't zero QP attrs when moving to IDLE RDMA/nes: Fix bugs in nes_reg_phys_mr() RDMA/nes: Fix compiler warning at nes_verbs.c:1955 IPoIB: Disable NAPI while CQ is being drained ...
2009-04-28Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: bio: fix memcpy corruption in bio_copy_user_iov() hd: fix locking mg_disk: fix CONFIG_LBD=y warning mg_disk: fix locking
2009-04-28Merge branches 'cxgb3', 'ipoib', 'mthca', 'mlx4' and 'nes' into for-linusRoland Dreier
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 07:49:34 +0000