summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-10-05drm/nv30-nv40: Fix postdivider mask when writing engine/memory PLLs.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: Fix perf table parsing on BMP v5.25.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: fix required mode bandwidth calculation for DPBen Skeggs
This should fix eDP on certain laptops with 18-bit panels, we were rejecting the panel's native mode due to thinking there was insufficient bandwidth for it. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: fix typo in c2aa91afea5f7e7ae4530fabd37414a79c03328cBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nva3: split pm backend out from nv50Ben Skeggs
This will end up quite different, it makes sense for it to be completely separate. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: run perflvl and M table scripts on mem clock changeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: pass perflvl struct to clock_pre()Ben Skeggs
On certain boards, there's BIOS scripts and memory timings that need to be modified with the memclk. Just pass in the entire perflvl struct and let the chipset-specific code decide what to do. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: enable enhanced framing only if DP display supports itBen Skeggs
Reported-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05drm/nouveau: Import initial memory timing workRoy Spliet
This isn't correct everywhere yet, but since we don't use the data yet it's perfectly safe to push in, and the information we gain from logs will help to fix the remaining issues. v2 (Ben Skeggs <bskeggs@redhat.com>): - fixed up formatting - free parsed timing info on takedown - switched timing table printout to debug loglevel Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv50: use pll type rather than register for CRTC PLLBen Skeggs
Just in case someone, somewhere, does something difficult. This also removes one path that was different between fermi and non-fermi. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: v3.0 pll limits tables have type<->register mapping tooBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Misc cleanup of the PM code.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Add support for I2C hardware monitoring devices.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Refactor nouveau_temp_get() into engine pointers.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Double the perf table memory clocks on pre-G71 cards.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Fix parsing of the temperature constant correction.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Add sane sensor correction defaults for nv4a.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv40: fix reading temp valueFrancesco Marella
Signed-off-by: Francesco Marella <fmarl@paranoici.org> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Don't try to parse a GPIO table on early DCBv2.2 BIOSes.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv10: Don't oops if the card wants to switch to a channel with no grctx.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: fix panels using straps-based mode detectionBen Skeggs
nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant entries. This nukes the mode id initialised by drm_mode_create(), and causes warnings from idr when we try to remove the mode. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: fix chipset vs card_type thinkoBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv50: assume smaller tiles for bo movesBen Skeggs
Somehow fixes some corruption seen in KDE.. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: add debugfs file to forcibly evict everything from vramBen Skeggs
Very useful for debugging buffer migration issues. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Add temperature support (vbios parsing, readings, hwmon)Martin Peres
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: correct INIT_DP_CONDITION subcondition 5Ben Skeggs
Fixes DP output on a GTX 465 board I have. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Parse old style perf tables.Francisco Jerez
Used on nv17-nv28, they contain memory clocks and timings, only one of the table entries can actually be used, depending on the RAMCFG straps, and it's usually higher than the frequency programmed on boot by the BIOS. The memory timings listed in table version 0x1x are used to init the 0x12xx range but they aren't required for reclocking to work. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv50: flush bar1 vm / dma object setup before poking 0x1708Ben Skeggs
Should fix issues noticed on NVAC (MacBook Pro / ION) since gpuobj rework. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: fix thinko in volt 0x1x parsingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: implement parsing of DCB 2.2 GPIO tableBen Skeggs
Found on NV3x boards, this should allow voltage modifications to work on these chipsets. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: fix potential accuracy loss when parsing perf 0x1c tablesBen Skeggs
Reported-by: Roy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Fix build regression, undefined reference to `acpi_video_get_edid'Phil Turmel
Build breakage: drivers/built-in.o: In function `nouveau_acpi_edid': (.text+0x13404e): undefined reference to `acpi_video_get_edid' make: *** [.tmp_vmlinux1] Error 1 Introduced by: a6ed76d7ffc62ffa474b41d31b011b6853c5de32 is the first bad commit commit a6ed76d7ffc62ffa474b41d31b011b6853c5de32 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Jul 12 15:33:07 2010 +1000 drm/nouveau: support fetching LVDS EDID from ACPI Based on a patch from Matthew Garrett. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com> It doesn't seem to revert cleanly, but the problem lies in these two config entries: CONFIG_ACPI=y CONFIG_ACPI_VIDEO=m Adding a select for ACPI_VIDEO appears to be the best solution, and is comparable to what is done in DRM_I915. Builds, boots, and appears to work correctly. Signed-off-by: Philip J. Turmel <philip@turmel.org> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: restore perflvl on resume, and restore boot perflvl on unloadBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: allow static performance level settingBen Skeggs
Guarded by a module parameter for the moment, read the code for the magic value which enables it. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv04-nv40: import initial pm backendBen Skeggs
Currently just hooked up to the already-existing nouveau_hw, which should handle all relevant chipsets as well as we currently can. This will likely be eventually split out and improved into chipset specific code at a later point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv50: import initial clock get/set routines + hook up pm engineBen Skeggs
This will make nouveau_pm attempt to report the card's current performance level both during bootup, and through sysfs. This is a very initial implementation, and can be improved a *lot* Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: import initial work on vbios performance table parsingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: make bios code easier to use externallyBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: make the behaviour of get_pll_limits() consistentBen Skeggs
This replaces all the pll_types definitions for ones that match the types used in the tables in recent VBIOS versions. get_pll_limits() will now accept either type or register value as input across all limits table versions, and will store the actual register ID that a PLL type refers to in the returned structure. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv50: fix 100c90 write on nva3Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: zero dummy pageBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nv50: mark PCIEGART pages non-present rather than using dummy pageBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: we can't free ACPI EDID, so make a copy that we canBen Skeggs
The rest of the connector code assumes we can kfree() the EDID pointer. This causes things to blow up with the ACPI EDID pointer we get passed. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: handle fifo pusher errors betterBen Skeggs
The most important part of this change is that we now instruct PFIFO to drop all pending fetches, rather than attempting to skip a single dword and hope that things would magically sort themselves out - they usually don't, and we end up with PFIFO being completely hung. This commit also adds somewhat more useful logging when these exceptions occur. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: better handling of unmappable vramBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Try to fetch an EDID from OF if DDC fails.Francisco Jerez
More Apple brain damage, it fixes the modesetting failure on an eMac G4 (fdo bug 29810). Reported-by: Zoltan Varnagy <doi@freemail.hu> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Simplify tile region handling.Francisco Jerez
Instead of emptying the caches to avoid a race with the PFIFO puller, go straight ahead and try to recover from it when it happens. Also, kill pfifo->cache_flush and tile->lock, we don't need them anymore. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Remove implicit argument from nv_wait().Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: PRAMIN is available from the start on pre-nv50.Francisco Jerez
This makes sure that RAMHT is cleared correctly on start up. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-09-24drm/nouveau: Add module parameter to override the default AGP rate.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:39:27 +0000