| Age | Commit message (Collapse) | Author |
|---|
|
The caller of XDP_SETUP_PROG has already incremented refcnt in
__bpf_prog_get(), so drivers should only increment refcnt by
num_queues - 1.
To fix the issue, update netvsc_xdp_set() to add the correct number
to refcnt.
Hold a refcnt in netvsc_xdp_set()’s other caller, netvsc_attach().
And, do the same in netvsc_vf_setxdp(). Otherwise, every time when VF is
removed and added from the host side, the refcnt will be decreased by one,
which may cause page fault when unloading xdp program.
Fixes: 351e1581395f ("hv_netvsc: Add XDP support")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.
Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.
Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering")
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It forgot to reduce the value of the variable retry in a while loop
in the ethqos_configure() function. It may cause an endless loop and
without timeout.
Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* pm-avs:
power: avs: qcom-cpr: Avoid clang -Wsometimes-uninitialized in cpr_scale
power: avs: qcom-cpr: add unspecified HAS_IOMEM dependency
PM / AVS: rockchip-io: fix the supply naming for the emmc supply on px30
power: avs: qcom-cpr: add a printout after the driver has been initialized
* pm-cpuidle:
cpuidle: Documentation: Clean up PM QoS description
intel_idle: Introduce 'states_off' module parameter
intel_idle: Introduce 'use_acpi' module parameter
|
|
As it is, vfs_parse_fs_string() makes "foo" and "foo=" indistinguishable;
both get fs_value_is_string for ->type and NULL for ->string. To make
it even more unpleasant, that combination is impossible to produce with
fsconfig().
Much saner rules would be
"foo" => fs_value_is_flag, NULL
"foo=" => fs_value_is_string, ""
"foo=bar" => fs_value_is_string, "bar"
All cases are distinguishable, all results are expressable by fsconfig(),
->has_value checks are much simpler that way (to the point of the field
being useless) and quite a few regressions go away (gfs2 has no business
accepting -o nodebug=, for example).
Partially based upon patches from Miklos.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.6-2020-02-05:
amdgpu:
- EDC fixes for Arcturus
- GDDR6 memory training fixe
- Fix for reading gfx clockgating registers while in GFXOFF state
- i2c freq fixes
- Misc display fixes
- TLB invalidation fix when using semaphores
- VCN 2.5 instancing fixes
- Switch raven1 gfxoff to a blacklist
- Coreboot workaround for KV/KB
- Root cause dongle fixes for display and revert workaround
- Enable GPU reset for renoir and navi
- Navi overclocking fixes
- Fix up confusing warnings in display clock validation on raven
amdkfd:
- SDMA fix
radeon:
- Misc LUT fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206035458.3894-1-alexander.deucher@amd.com
|
|
Just a couple of fixes to Volta/Turing modesetting on some systems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv7=eP+Ai1ouoMyYyo1xMF0pTQki=owYjJkS=NpvKQd1fg@mail.gmail.com
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Fixes for v5.6-rc1
These are a couple of quick fixes for regressions that were found during
the first two weeks of the merge window.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206172753.2185390-1-thierry.reding@gmail.com
|
|
Deprecate the generic TLS cap bit, use the new TX-specific
TLS cap bit instead.
Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
For a cyclic work queue, when not requesting a completion per WQE,
a single CQE might indicate the completion of several WQEs.
However, in case some WQE in the batch causes an error, then an error
completion is issued, breaking the batch, and pointing to the offending
WQE in the wqe_counter field.
Hence, WQE-specific error CQE handling (like printing, breaking, etc...)
should be performed only for the last WQE in batch.
Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events")
Fixes: fd9b4be8002c ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.
Fix by free SA context when the SA is released.
Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.
Fix by remove the unary not negation operator.
Fixes: 05564d0ae075 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
free_match_list could be called when the flow table is already
locked. We need to pass this notation to tree_put_node.
It fixes the following lockdep warnning:
[ 1797.268537] ============================================
[ 1797.276837] WARNING: possible recursive locking detected
[ 1797.285101] 5.5.0-rc5+ #10 Not tainted
[ 1797.291641] --------------------------------------------
[ 1797.299917] handler10/9296 is trying to acquire lock:
[ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at:
tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.319694]
[ 1797.319694] but task is already holding lock:
[ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at:
nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core]
[ 1797.344707]
[ 1797.344707] other info that might help us debug this:
[ 1797.356952] Possible unsafe locking scenario:
[ 1797.356952]
[ 1797.368333] CPU0
[ 1797.373357] ----
[ 1797.378364] lock(&node->lock);
[ 1797.384222] lock(&node->lock);
[ 1797.390031]
[ 1797.390031] *** DEADLOCK ***
[ 1797.390031]
[ 1797.403003] May be due to missing lock nesting notation
[ 1797.403003]
[ 1797.414691] 3 locks held by handler10/9296:
[ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at:
tc_setup_cb_add+0x70/0x250
[ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at:
mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core]
[ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at:
nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core]
[ 1797.459913]
[ 1797.459913] stack backtrace:
[ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not
tainted 5.5.0-rc5+ #10
[ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS
2.4.3 01/17/2017
[ 1797.491480] Call Trace:
[ 1797.496701] dump_stack+0x96/0xe0
[ 1797.502864] __lock_acquire.cold.63+0xf8/0x212
[ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250
[ 1797.517701] ? mark_held_locks+0x55/0xa0
[ 1797.524547] ? quarantine_put+0xb7/0x160
[ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250
[ 1797.538913] lock_acquire+0xd6/0x1f0
[ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.553701] down_write+0x94/0x140
[ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.568464] ? down_write_killable_nested+0x170/0x170
[ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core]
[ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core]
[ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core]
[ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core]
[ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core]
[ 1797.621838] ? lock_acquire+0xd6/0x1f0
[ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core]
[ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core]
[ 1797.647459] ? try_to_wake_up+0x4c7/0xc70
[ 1797.654881] ? lock_downgrade+0x350/0x350
[ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0
[ 1797.670396] ? find_held_lock+0xac/0xd0
[ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core]
[ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core]
[ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core]
[ 1797.704270] ? irq_exit+0xa5/0x170
[ 1797.710764] ? retint_kernel+0x10/0x10
[ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230
[mlx5_core]
[ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core]
[ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core]
[ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core]
[ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core]
[ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core]
[ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core]
[ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core]
[ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core]
[ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0
[mlx5_core]
[ 1797.815093] ? wait_for_completion+0x260/0x260
[ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core]
[ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core]
[ 1797.842096] ? down_read+0x11a/0x2e0
[ 1797.849090] ? down_write+0x140/0x140
[ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core]
[ 1797.866027] tc_setup_cb_add+0x11a/0x250
[ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower]
[ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower]
[ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower]
[ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0
[cls_flower]
[ 1797.910728] ? lock_downgrade+0x350/0x350
[ 1797.918187] ? __radix_tree_lookup+0xa5/0x130
[ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower]
[ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0
[cls_flower]
[ 1797.945673] tc_new_tfilter+0xcd1/0x1240
[ 1797.953138] ? tc_del_tfilter+0xb10/0xb10
[ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320
[ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320
[ 1797.976816] ? avc_has_extended_perms+0x990/0x990
[ 1797.985090] ? mark_lock+0xaa/0x9e0
[ 1797.991988] ? match_held_lock+0x1b/0x240
[ 1797.999457] ? match_held_lock+0x1b/0x240
[ 1798.006859] ? find_held_lock+0xac/0xd0
[ 1798.014045] ? symbol_put_addr+0x40/0x40
[ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0
[ 1798.029460] ? tc_del_tfilter+0xb10/0xb10
[ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620
[ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460
[ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250
[ 1798.059837] ? match_held_lock+0x1b/0x240
[ 1798.067146] ? find_held_lock+0xac/0xd0
[ 1798.074246] netlink_rcv_skb+0xc6/0x1f0
[ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460
[ 1798.089104] ? netlink_ack+0x440/0x440
[ 1798.096061] netlink_unicast+0x2d4/0x3b0
[ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0
[ 1798.110724] ? _copy_from_iter_full+0xda/0x370
[ 1798.118415] netlink_sendmsg+0x3ba/0x6a0
[ 1798.125478] ? netlink_unicast+0x3b0/0x3b0
[ 1798.132705] ? netlink_unicast+0x3b0/0x3b0
[ 1798.139880] sock_sendmsg+0x94/0xa0
[ 1798.146332] ____sys_sendmsg+0x36c/0x3f0
[ 1798.153251] ? copy_msghdr_from_user+0x165/0x230
[ 1798.160941] ? kernel_sendmsg+0x30/0x30
[ 1798.167738] ___sys_sendmsg+0xeb/0x150
[ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30
[ 1798.181649] ? lock_downgrade+0x350/0x350
[ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0
[ 1798.196239] ? __fget+0x21d/0x320
[ 1798.202335] ? do_dup2+0x2a0/0x2a0
[ 1798.208499] ? lock_downgrade+0x350/0x350
[ 1798.215366] ? __fget_light+0xd6/0xf0
[ 1798.221808] ? syscall_trace_enter+0x369/0x5d0
[ 1798.229112] __sys_sendmsg+0xd3/0x160
[ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60
[ 1798.242478] ? syscall_trace_enter+0x233/0x5d0
[ 1798.249721] ? syscall_slow_exit_work+0x280/0x280
[ 1798.257211] ? do_syscall_64+0x1e/0x2e0
[ 1798.263680] do_syscall_64+0x72/0x2e0
[ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The DMA direction is only used by the DMA API, so there is no use in
setting it when a buffer object isn't mapped with the DMA API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
|
|
This partially reverts the DMA API support that was recently merged
because it was causing performance regressions on older Tegra devices.
Unfortunately, the cache maintenance performed by dma_map_sg() and
dma_unmap_sg() causes performance to drop by a factor of 10.
The right solution for this would be to cache mappings for buffers per
consumer device, but that's a bit involved. Instead, we simply revert to
the old behaviour of sharing IOVA mappings when we know that devices can
do so (i.e. they share the same IOMMU domain).
Cc: <stable@vger.kernel.org> # v5.5
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
|
|
Older Tegra devices only allow addressing 32 bits of memory, so whether
or not the host1x is attached to an IOMMU doesn't matter. host1x IOMMU
attachment is only needed on devices that can address memory beyond the
32-bit boundary and where the host1x doesn't support the wide GATHER
opcode that allows it to access buffers at higher addresses.
Cc: <stable@vger.kernel.org> # v5.5
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
(Jason A. Donenfeld)
- Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
Sathyanarayanan)
* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ATS: Use PF PASID for VFs
x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
|
|
After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.
Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turned out that on low performance systems the original change can
cause lower tx performance. On a N3450-based mini-PC tx performance
in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively
revert the original change, just use pcie_set_readrq() now instead of
changing the PCIe capability register directly.
Fixes: 2df49d365498 ("r8169: remove fiddling with the PCIe max read request size")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ceph fixes from Ilya Dryomov:
- a set of patches that fixes various corner cases in mount and umount
code (Xiubo Li). This has to do with choosing an MDS, distinguishing
between laggy and down MDSes and parsing the server path.
- inode initialization fixes (Jeff Layton). The one included here
mostly concerns things like open_by_handle() and there is another one
that will come through Al.
- copy_file_range() now uses the new copy-from2 op (Luis Henriques).
The existing copy-from op turned out to be infeasible for generic
filesystem use; we disable the copy offload if OSDs don't support
copy-from2.
- a patch to link "rbd" and "block" devices together in sysfs (Hannes
Reinecke)
... and a smattering of cleanups from Xiubo, Jeff and Chengguang.
* tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits)
rbd: set the 'device' link in sysfs
ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c
ceph: print name of xattr in __ceph_{get,set}xattr() douts
ceph: print r_direct_hash in hex in __choose_mds() dout
ceph: use copy-from2 op in copy_file_range
ceph: close holes in structs ceph_mds_session and ceph_mds_request
rbd: work around -Wuninitialized warning
ceph: allocate the correct amount of extra bytes for the session features
ceph: rename get_session and switch to use ceph_get_mds_session
ceph: remove the extra slashes in the server path
ceph: add possible_max_rank and make the code more readable
ceph: print dentry offset in hex and fix xattr_version type
ceph: only touch the caps which have the subset mask requested
ceph: don't clear I_NEW until inode metadata is fully populated
ceph: retry the same mds later after the new session is opened
ceph: check availability of mds cluster on mount after wait timeout
ceph: keep the session state until it is released
ceph: add __send_request helper
ceph: ensure we have a new cap before continuing in fill_inode
ceph: drop unused ttl_from parameter from fill_inode
...
|
|
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics
Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management")
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added debugfs entry to show the tls stats.
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We forget to put the inode and unmount the kernfs used for compaction.
Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When unloading the driver while hinting is in progress, we will not
release the free page blocks back to MM, resulting in a memory leak.
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Make sure, at build time, that pfn array is big enough to hold a single
page. It happens to be true since the PAGE_SHIFT value at the moment is
20, which is 1M - exactly 256 4K balloon pages.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
Since the need for a special flag to support SCSI passthrough on a
block device was added in May 2017 the SCSI passthrough support in
virtio-blk has been disabled. It has always been a bad idea
(just ask the original author..) and we have virtio-scsi for proper
passthrough. The feature also never made it into the virtio 1.0
or later specifications.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
VQs without a name specified are not valid; they are skipped in the
later loop that assigns MSI-X vectors to queues, but the per_vq_vectors
loop above that counts the required number of vectors previously still
counted any queue with a non-NULL callback as needing a vector.
Add a check to the per_vq_vectors loop so that vectors with no name are
not counted to make the two loops consistent. This prevents
over-counting unnecessary vectors (e.g. for features which were not
negotiated with the device).
Cc: stable@vger.kernel.org
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wang, Wei W <wei.w.wang@intel.com>
|
|
Ensure that elements of the callbacks array that correspond to
unavailable features are set to NULL; previously, they would be left
uninitialized.
Since the corresponding names array elements were explicitly set to
NULL, the uninitialized callback pointers would not actually be
dereferenced; however, the uninitialized callbacks elements would still
be read in vp_find_vqs_msix() and used to calculate the number of MSI-X
vectors required.
Cc: stable@vger.kernel.org
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use devm_platform_ioremap_resource() to simplify code, which
contains platform_get_resource, devm_request_mem_region and
devm_ioremap.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
|
|
Pull more block updates from Jens Axboe:
"Some later arrivals, but all fixes at this point:
- bcache fix series (Coly)
- Series of BFQ fixes (Paolo)
- NVMe pull request from Keith with a few minor NVMe fixes
- Various little tweaks"
* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
nvmet: update AEN list and array at one place
nvmet: Fix controller use after free
nvmet: Fix error print message at nvmet_install_queue function
brd: check and limit max_part par
nvme-pci: remove nvmeq->tags
nvmet: fix dsm failure when payload does not match sgl descriptor
nvmet: Pass lockdep expression to RCU lists
block, bfq: clarify the goal of bfq_split_bfqq()
block, bfq: get a ref to a group when adding it to a service tree
block, bfq: remove ifdefs from around gets/puts of bfq groups
block, bfq: extend incomplete name of field on_st
block, bfq: get extra ref to prevent a queue from being freed during a group move
block, bfq: do not insert oom queue into position tree
block, bfq: do not plug I/O for bfq_queues with no proc refs
bcache: check return value of prio_read()
bcache: fix incorrect data type usage in btree_flush_write()
bcache: add readahead cache policy options via sysfs interface
bcache: explicity type cast in bset_bkey_last()
bcache: fix memory corruption in bch_cache_accounting_clear()
xen/blkfront: limit allocated memory size to actual use case
...
|
|
Pull libata updates from Jens Axboe:
- Add a Sandisk CF card to supported pata_pcmcia list (Christian)
- Move pata_arasan_cf away from legacy API (Peter)
- Ensure ahci DMA/ints are shut down on shutdown (Prabhakar)
* tag 'libata-5.6-2020-02-05' of git://git.kernel.dk/linux-block:
ata: pata_arasan_cf: Use dma_request_chan() instead dma_request_slave_channel()
ata: ahci: Add shutdown to freeze hardware resources of ahci
pata_pcmia: add SanDisk High (>8G) CF card to supported list
|
|
Return -EAGAIN instead of -ENETDOWN to provide a slightly milder
information to user space so that an application will know to retry the
syscall when __I40E_CONFIG_BUSY bit is set on pf->state.
Fixes: b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-2-maciej.fijalkowski@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Mostly cleanups and minor improvements with some new chip support for
some drivers"
* tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: Remove set but not set variable 'pwm'
pwm: sun4i: Initialize variables before use
pwm: stm32: Remove automatic output enable
pwm: sun4i: Narrow scope of local variable
pwm: bcm2835: Allow building for ARCH_BRCMSTB
pwm: imx27: Eliminate error message for defer probe
pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
pwm: sun4i: Move pwm_calculate() out of spin_lock()
pwm: omap-dmtimer: Allow compiling with COMPILE_TEST
pwm: omap-dmtimer: put_device() after of_find_device_by_node()
pwm: omap-dmtimer: Simplify error handling
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
pwm: Implement tracing for .get_state() and .apply_state()
pwm: rcar: Document inability to set duty_cycle = 0
pwm: rcar: Drop useless call to pwm_get_state()
pwm: Fix minor Kconfig whitespace issues
pwm: atmel: Implement .get_state()
pwm: atmel: Use register accessors for channels
pwm: atmel: Document known weaknesses of both hardware and software
pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation
...
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Fixes for:
- Documentation build error fix
- Fix dma_request_chan() error return
- Remove unneeded conversion in idxd driver
- Fix pointer check for dma_async_device_channel_register()
- Fix slave-channel symlink cleanup"
* tag 'dmaengine-fix-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Cleanups for the slave <-> channel symlink support
dmaengine: fix null ptr check for __dma_async_device_channel_register()
dmaengine: idxd: fix boolconv.cocci warnings
dmaengine: Fix return value for dma_request_chan() in case of failure
dmaengine: doc: Properly indent metadata title
|
|
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the
PF PASID configuration is shared by its VFs, and VFs must not implement
their own PASID Capability. But commit 751035b8dc06 ("PCI/ATS: Cache PASID
Capability offset") changed pci_max_pasids() and pci_pasid_features() to
use the PASID Capability of the VF device instead of the associated PF
device. This leads to IOMMU bind failures when pci_max_pasids() and
pci_pasid_features() are called for VFs.
In pci_max_pasids() and pci_pasid_features(), always use the PF PASID
Capability.
Fixes: 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset")
Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v5.5+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Allow compiling the ARM-SMMU drivers as modules.
- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
collected by Will Deacon. The merge-commit (6855d1ba7537) has all the
details.
- Cleanup of the iommu_put_resv_regions() call-backs in various
drivers.
- AMD IOMMU driver cleanups.
- Update for the x2APIC support in the AMD IOMMU driver.
- Preparation patches for Intel VT-d nested mode support.
- RMRR and identity domain handling fixes for the Intel VT-d driver.
- More small fixes and cleanups.
* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
iommu/amd: Remove the unnecessary assignment
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
iommu/vt-d: Unnecessary to handle default identity domain
iommu/vt-d: Allow devices with RMRRs to use identity domain
iommu/vt-d: Add RMRR base and end addresses sanity check
iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
iommu/amd: Remove unused struct member
iommu/amd: Replace two consecutive readl calls with one readq
iommu/vt-d: Don't reject Host Bridge due to scope mismatch
PCI/ATS: Add PASID stubs
iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
iommu/arm-smmu-v3: Improve add_device() error handling
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
iommu/arm-smmu-v3: Add second level of context descriptor table
iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
iommu/arm-smmu-v3: Propagate ssid_bits
iommu/arm-smmu-v3: Add support for Substream IDs
iommu/arm-smmu-v3: Add context descriptor tables allocators
iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
ACPI/IORT: Parse SSID property of named component node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix a bug introduced in 5.5 in the Xen gntdev driver
- fix the Xen balloon driver when running on ancient Xen versions
- allow Xen stubdoms to control interrupt enable flags of
passed-through PCI cards
- release resources in Xen backends under memory pressure
* tag 'for-linus-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/blkback: Consistently insert one empty line between functions
xen/blkback: Remove unnecessary static variable name prefixes
xen/blkback: Squeeze page pools if a memory pressure is detected
xenbus/backend: Protect xenbus callback with lock
xenbus/backend: Add memory pressure handler callback
xen/gntdev: Do not use mm notifiers with autotranslating guests
xen/balloon: Support xend-based toolstack take two
xen-pciback: optionally allow interrupt enable flag writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
"The second round of s390 fixes and features for 5.6:
- Add KPROBES_ON_FTRACE support
- Add EP11 AES secure keys support
- PAES rework and prerequisites for paes-s390 ciphers selftests
- Fix page table upgrade for hugetlbfs"
* tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey/zcrypt: Support EP11 AES secure keys
s390/zcrypt: extend EP11 card and queue sysfs attributes
s390/zcrypt: add new low level ep11 functions support file
s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb
s390/zcrypt: enable card/domain autoselect on ep11 cprbs
s390/crypto: enable clear key values for paes ciphers
s390/pkey: Add support for key blob with clear key value
s390/crypto: Rework on paes implementation
s390: support KPROBES_ON_FTRACE
s390/mm: fix dynamic pagetable upgrade for hugetlbfs
|
|
commit cedeac9df4b8 ("qed: Add support for Timestamping the unicast
PTP packets.") handles the timestamping of L4 ptp packets only.
This patch adds driver changes to detect/timestamp both L2/L4 unicast
PTP packets.
Fixes: cedeac9df4b8 ("qed: Add support for Timestamping the unicast PTP packets.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.
Fixes: 1629dd4f763c ("cadence: Add LSO support.")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
[<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
[<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
[<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
[<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
[<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
[<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
[<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
[<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
[<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
[<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
[<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
[<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
[<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
[<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
[<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
[<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
[<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
[<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
[<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
[<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
[<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
[<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
[<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The receive frame length calculation uses a wrong mask to calculate the
length of the received frames.
Per spec table 4-1 the length is contained in the FL (Frame Length)
field in bits 30:16.
This didn't show up as an issue so far since frames were limited to
1500 bytes which falls within the 11 bit window.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Our static-static calculation returns a failure if the public key is of
low order. We check for this when peers are added, and don't allow them
to be added if they're low order, except in the case where we haven't
yet been given a private key. In that case, we would defer the removal
of the peer until we're given a private key, since at that point we're
doing new static-static calculations which incur failures we can act on.
This meant, however, that we wound up removing peers rather late in the
configuration flow.
Syzkaller points out that peer_remove calls flush_workqueue, which in
turn might then wait for sending a handshake initiation to complete.
Since handshake initiation needs the static identity lock, holding the
static identity lock while calling peer_remove can result in a rare
deadlock. We have precisely this case in this situation of late-stage
peer removal based on an invalid public key. We can't drop the lock when
removing, because then incoming handshakes might interact with a bogus
static-static calculation.
While the band-aid patch for this would involve breaking up the peer
removal into two steps like wg_peer_remove_all does, in order to solve
the locking issue, there's actually a much more elegant way of fixing
this:
If the static-static calculation succeeds with one private key, it
*must* succeed with all others, because all 32-byte strings map to valid
private keys, thanks to clamping. That means we can get rid of this
silly dance and locking headaches of removing peers late in the
configuration flow, and instead just reject them early on, regardless of
whether the device has yet been assigned a private key. For the case
where the device doesn't yet have a private key, we safely use zeros
just for the purposes of checking for low order points by way of
checking the output of the calculation.
The following PoC will trigger the deadlock:
ip link add wg0 type wireguard
ip addr add 10.0.0.1/24 dev wg0
ip link set wg0 up
ping -f 10.0.0.2 &
while true; do
wg set wg0 private-key /dev/null peer AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= allowed-ips 10.0.0.0/24 endpoint 10.0.0.3:1234
wg set wg0 private-key <(echo AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=)
done
[ 0.949105] ======================================================
[ 0.949550] WARNING: possible circular locking dependency detected
[ 0.950143] 5.5.0-debug+ #18 Not tainted
[ 0.950431] ------------------------------------------------------
[ 0.950959] wg/89 is trying to acquire lock:
[ 0.951252] ffff8880333e2128 ((wq_completion)wg-kex-wg0){+.+.}, at: flush_workqueue+0xe3/0x12f0
[ 0.951865]
[ 0.951865] but task is already holding lock:
[ 0.952280] ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[ 0.953011]
[ 0.953011] which lock already depends on the new lock.
[ 0.953011]
[ 0.953651]
[ 0.953651] the existing dependency chain (in reverse order) is:
[ 0.954292]
[ 0.954292] -> #2 (&wg->static_identity.lock){++++}:
[ 0.954804] lock_acquire+0x127/0x350
[ 0.955133] down_read+0x83/0x410
[ 0.955428] wg_noise_handshake_create_initiation+0x97/0x700
[ 0.955885] wg_packet_send_handshake_initiation+0x13a/0x280
[ 0.956401] wg_packet_handshake_send_worker+0x10/0x20
[ 0.956841] process_one_work+0x806/0x1500
[ 0.957167] worker_thread+0x8c/0xcb0
[ 0.957549] kthread+0x2ee/0x3b0
[ 0.957792] ret_from_fork+0x24/0x30
[ 0.958234]
[ 0.958234] -> #1 ((work_completion)(&peer->transmit_handshake_work)){+.+.}:
[ 0.958808] lock_acquire+0x127/0x350
[ 0.959075] process_one_work+0x7ab/0x1500
[ 0.959369] worker_thread+0x8c/0xcb0
[ 0.959639] kthread+0x2ee/0x3b0
[ 0.959896] ret_from_fork+0x24/0x30
[ 0.960346]
[ 0.960346] -> #0 ((wq_completion)wg-kex-wg0){+.+.}:
[ 0.960945] check_prev_add+0x167/0x1e20
[ 0.961351] __lock_acquire+0x2012/0x3170
[ 0.961725] lock_acquire+0x127/0x350
[ 0.961990] flush_workqueue+0x106/0x12f0
[ 0.962280] peer_remove_after_dead+0x160/0x220
[ 0.962600] wg_set_device+0xa24/0xcc0
[ 0.962994] genl_rcv_msg+0x52f/0xe90
[ 0.963298] netlink_rcv_skb+0x111/0x320
[ 0.963618] genl_rcv+0x1f/0x30
[ 0.963853] netlink_unicast+0x3f6/0x610
[ 0.964245] netlink_sendmsg+0x700/0xb80
[ 0.964586] __sys_sendto+0x1dd/0x2c0
[ 0.964854] __x64_sys_sendto+0xd8/0x1b0
[ 0.965141] do_syscall_64+0x90/0xd9a
[ 0.965408] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 0.965769]
[ 0.965769] other info that might help us debug this:
[ 0.965769]
[ 0.966337] Chain exists of:
[ 0.966337] (wq_completion)wg-kex-wg0 --> (work_completion)(&peer->transmit_handshake_work) --> &wg->static_identity.lock
[ 0.966337]
[ 0.967417] Possible unsafe locking scenario:
[ 0.967417]
[ 0.967836] CPU0 CPU1
[ 0.968155] ---- ----
[ 0.968497] lock(&wg->static_identity.lock);
[ 0.968779] lock((work_completion)(&peer->transmit_handshake_work));
[ 0.969345] lock(&wg->static_identity.lock);
[ 0.969809] lock((wq_completion)wg-kex-wg0);
[ 0.970146]
[ 0.970146] *** DEADLOCK ***
[ 0.970146]
[ 0.970531] 5 locks held by wg/89:
[ 0.970908] #0: ffffffff827433c8 (cb_lock){++++}, at: genl_rcv+0x10/0x30
[ 0.971400] #1: ffffffff82743480 (genl_mutex){+.+.}, at: genl_rcv_msg+0x642/0xe90
[ 0.971924] #2: ffffffff827160c0 (rtnl_mutex){+.+.}, at: wg_set_device+0x9f/0xcc0
[ 0.972488] #3: ffff888032819de0 (&wg->device_update_lock){+.+.}, at: wg_set_device+0xb0/0xcc0
[ 0.973095] #4: ffff888032819bc0 (&wg->static_identity.lock){++++}, at: wg_set_device+0x95d/0xcc0
[ 0.973653]
[ 0.973653] stack backtrace:
[ 0.973932] CPU: 1 PID: 89 Comm: wg Not tainted 5.5.0-debug+ #18
[ 0.974476] Call Trace:
[ 0.974638] dump_stack+0x97/0xe0
[ 0.974869] check_noncircular+0x312/0x3e0
[ 0.975132] ? print_circular_bug+0x1f0/0x1f0
[ 0.975410] ? __kernel_text_address+0x9/0x30
[ 0.975727] ? unwind_get_return_address+0x51/0x90
[ 0.976024] check_prev_add+0x167/0x1e20
[ 0.976367] ? graph_lock+0x70/0x160
[ 0.976682] __lock_acquire+0x2012/0x3170
[ 0.976998] ? register_lock_class+0x1140/0x1140
[ 0.977323] lock_acquire+0x127/0x350
[ 0.977627] ? flush_workqueue+0xe3/0x12f0
[ 0.977890] flush_workqueue+0x106/0x12f0
[ 0.978147] ? flush_workqueue+0xe3/0x12f0
[ 0.978410] ? find_held_lock+0x2c/0x110
[ 0.978662] ? lock_downgrade+0x6e0/0x6e0
[ 0.978919] ? queue_rcu_work+0x60/0x60
[ 0.979166] ? netif_napi_del+0x151/0x3b0
[ 0.979501] ? peer_remove_after_dead+0x160/0x220
[ 0.979871] peer_remove_after_dead+0x160/0x220
[ 0.980232] wg_set_device+0xa24/0xcc0
[ 0.980516] ? deref_stack_reg+0x8e/0xc0
[ 0.980801] ? set_peer+0xe10/0xe10
[ 0.981040] ? __ww_mutex_check_waiters+0x150/0x150
[ 0.981430] ? __nla_validate_parse+0x163/0x270
[ 0.981719] ? genl_family_rcv_msg_attrs_parse+0x13f/0x310
[ 0.982078] genl_rcv_msg+0x52f/0xe90
[ 0.982348] ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[ 0.982690] ? register_lock_class+0x1140/0x1140
[ 0.983049] netlink_rcv_skb+0x111/0x320
[ 0.983298] ? genl_family_rcv_msg_attrs_parse+0x310/0x310
[ 0.983645] ? netlink_ack+0x880/0x880
[ 0.983888] genl_rcv+0x1f/0x30
[ 0.984168] netlink_unicast+0x3f6/0x610
[ 0.984443] ? netlink_detachskb+0x60/0x60
[ 0.984729] ? find_held_lock+0x2c/0x110
[ 0.984976] netlink_sendmsg+0x700/0xb80
[ 0.985220] ? netlink_broadcast_filtered+0xa60/0xa60
[ 0.985533] __sys_sendto+0x1dd/0x2c0
[ 0.985763] ? __x64_sys_getpeername+0xb0/0xb0
[ 0.986039] ? sockfd_lookup_light+0x17/0x160
[ 0.986397] ? __sys_recvmsg+0x8c/0xf0
[ 0.986711] ? __sys_recvmsg_sock+0xd0/0xd0
[ 0.987018] __x64_sys_sendto+0xd8/0x1b0
[ 0.987283] ? lockdep_hardirqs_on+0x39b/0x5a0
[ 0.987666] do_syscall_64+0x90/0xd9a
[ 0.987903] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 0.988223] RIP: 0033:0x7fe77c12003e
[ 0.988508] Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 4
[ 0.989666] RSP: 002b:00007fffada2ed58 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 0.990137] RAX: ffffffffffffffda RBX: 00007fe77c159d48 RCX: 00007fe77c12003e
[ 0.990583] RDX: 0000000000000040 RSI: 000055fd1d38e020 RDI: 0000000000000004
[ 0.991091] RBP: 000055fd1d38e020 R08: 000055fd1cb63358 R09: 000000000000000c
[ 0.991568] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002c
[ 0.992014] R13: 0000000000000004 R14: 000055fd1d38e020 R15: 0000000000000001
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the unlikely case a new node could not be allocated, we need to
remove @newnode from @peer->allowedips_list before freeing it.
syzbot reported:
BUG: KASAN: use-after-free in __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
Read of size 8 at addr ffff88809881a538 by task syz-executor.4/30133
CPU: 0 PID: 30133 Comm: syz-executor.4 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
__list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
__list_del_entry include/linux/list.h:132 [inline]
list_del include/linux/list.h:146 [inline]
root_remove_peer_lists+0x24f/0x4b0 drivers/net/wireguard/allowedips.c:65
wg_allowedips_free+0x232/0x390 drivers/net/wireguard/allowedips.c:300
wg_peer_remove_all+0xd5/0x620 drivers/net/wireguard/peer.c:187
wg_set_device+0xd01/0x1350 drivers/net/wireguard/netlink.c:542
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45b399
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f99a9bcdc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f99a9bce6d4 RCX: 000000000045b399
RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000000009ba R14: 00000000004cb2b8 R15: 0000000000000009
Allocated by task 30103:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
kmem_cache_alloc_trace+0x158/0x790 mm/slab.c:3551
kmalloc include/linux/slab.h:556 [inline]
kzalloc include/linux/slab.h:670 [inline]
add+0x70a/0x1970 drivers/net/wireguard/allowedips.c:236
wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 30103:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
add+0x12d2/0x1970 drivers/net/wireguard/allowedips.c:266
wg_allowedips_insert_v4+0xf6/0x160 drivers/net/wireguard/allowedips.c:320
set_allowedip drivers/net/wireguard/netlink.c:343 [inline]
set_peer+0xfb9/0x1150 drivers/net/wireguard/netlink.c:468
wg_set_device+0xbd4/0x1350 drivers/net/wireguard/netlink.c:591
genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:717 [inline]
genl_rcv_msg+0x67d/0xea0 net/netlink/genetlink.c:734
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
genl_rcv+0x29/0x40 net/netlink/genetlink.c:745
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff88809881a500
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 56 bytes inside of
64-byte region [ffff88809881a500, ffff88809881a540)
The buggy address belongs to the page:
page:ffffea0002620680 refcount:1 mapcount:0 mapping:ffff8880aa400380 index:0x0
raw: 00fffe0000000200 ffffea000250b748 ffffea000254bac8 ffff8880aa400380
raw: 0000000000000000 ffff88809881a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88809881a400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809881a480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88809881a500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff88809881a580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809881a600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: wireguard@lists.zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/netdevsim/dev.c:937:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 6556ff32f12d ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs")
CC: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip") moved
request_irq() from ioc3_open into probe function, but forgot to remove
free_irq() from ioc3_close.
Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disabling a display on MST can potentially happen after the entire MST
topology has been removed, which means that we can't communicate with
the topology at all in this scenario. Likewise, this also means that we
can't properly update payloads on the topology and as such, it's a good
idea to ignore payload update failures when disabling displays.
Currently, amdgpu makes the mistake of halting the payload update
process when any payload update failures occur, resulting in leaving
DC's local copies of the payload tables out of date.
This ends up causing problems with hotplugging MST topologies, and
causes modesets on the second hotplug to fail like so:
[drm] Failed to updateMST allocation table forpipe idx:1
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1511 at
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677
update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack
nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4
nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc
vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic
snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops
videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul
snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core
ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm
sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd
wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O)
rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm
drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm
crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core
rtsx_pci pinctrl_amd
CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-rc7Lyude-Test+ #4
Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019
RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06
49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9
2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00
RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000
RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610
RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000
R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000
R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002
FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0
Call Trace:
? mutex_lock+0xe/0x30
dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu]
? dm_read_reg_func+0x39/0xb0 [amdgpu]
? core_link_enable_stream+0x656/0x730 [amdgpu]
core_link_enable_stream+0x656/0x730 [amdgpu]
dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu]
? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu]
? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu]
dc_commit_state+0x292/0x770 [amdgpu]
? add_timer+0x101/0x1f0
? ttm_bo_put+0x1a1/0x2f0 [ttm]
amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu]
? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu]
? amdgpu_bo_move+0x16d/0x2b0 [amdgpu]
? ttm_bo_handle_move_mem+0x118/0x570 [ttm]
? ttm_bo_validate+0x134/0x150 [ttm]
? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu]
? _cond_resched+0x15/0x30
? wait_for_completion_timeout+0x38/0x160
? _cond_resched+0x15/0x30
? wait_for_completion_interruptible+0x33/0x190
commit_tail+0x94/0x130 [drm_kms_helper]
drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper]
drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
drm_mode_setcrtc+0x194/0x6a0 [drm]
? _cond_resched+0x15/0x30
? mutex_lock+0xe/0x30
? drm_mode_getcrtc+0x180/0x180 [drm]
drm_ioctl_kernel+0xaa/0xf0 [drm]
drm_ioctl+0x208/0x390 [drm]
? drm_mode_getcrtc+0x180/0x180 [drm]
amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
do_vfs_ioctl+0x458/0x6d0
ksys_ioctl+0x5e/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fab2121f87b
Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b
RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10
R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280
---[ end trace 6ea888c24d2059cd ]---
Note as well, I have only been able to reproduce this on setups with 2
MST displays.
Changes since v1:
* Don't return false when part 1 or part 2 of updating the payloads
fails, we don't want to abort at any step of the process even if
things fail
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
