summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-05-01net: aquantia: link interrupt handling functionIgor Russkikh
Define link interrupt handler Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: add link interrupt fieldsIgor Russkikh
Declare macroes and nic fields to support link interrupt handling Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: implement hwmon api for chip temperatureYana Esina
Added support for hwmon api to fetch out chip temperature Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: aquantia: add infrastructure to readout chip temperatureYana Esina
Ability to read the chip temperature from memory via hwmon interface Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30r8169: remove manual autoneg restart workaroundHeiner Kallweit
According to Neil who reported the issue leading to this workaround, the workaround is no longer needed since version 5.0. So let's remove it. This was the bug report leading to the workaround: https://bugzilla.kernel.org/show_bug.cgi?id=201081 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30r8169: add rtl_reset_packet_filterHeiner Kallweit
Fortunately in one place there's a comment explaining what toggling this bit does. So let's create a helper for it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30r8169: add helpers rtl_eri_set/clear_bitsHeiner Kallweit
Add helpers rtl_eri_set_bits and rtl_eri_clear_bits to improve readability of the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30r8169: make ERIAR_EXGMAC the default in eri functionsHeiner Kallweit
In basically all eri function calls the type argument is ERIAR_EXGMAC. Therefore make it the default. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: mv88e6060: Remove support for legacy probingAndrew Lunn
Now that the driver can be probed as an mdio device, remove the legacy DSA platform device probing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: mv88e6060: Support probing as an mdio deviceAndrew Lunn
Probing DSA devices as platform devices has been superseded by using normal bus drivers. Add support for probing the mv88e6060 device as an mdio device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: b53: Use vlan_filtering property from dsa_switchVladimir Oltean
While possible (and safe) to use the newly introduced dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a bit awkward, so simply retrieve this from the dsa_switch structure. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: b53: Let DSA call .port_vlan_filtering only when necessaryVladimir Oltean
Since DSA has recently learned to treat better with drivers that set vlan_filtering_is_global, doing this is no longer required. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: mt7530: Use the DSA vlan_filtering helper functionVladimir Oltean
This was recently introduced, so keeping state inside the driver is no longer necessary. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: mt7530: Let DSA handle the unsetting of vlan_filteringVladimir Oltean
The driver, recognizing that the .port_vlan_filtering callback was never coming after the port left its parent bridge, decided to take that duty in its own hands. DSA now takes care of this condition, so fix that. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30net: dsa: b53: Let DSA handle mismatched VLAN filtering settingsVladimir Oltean
The DSA core is now able to do this check prior to calling the .port_vlan_filtering callback, so tell it that VLAN filtering is global for this particular hardware. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29net: phy: micrel: make sure the factory test bit is clearedAntoine Tenart
The KSZ8081 PHY has a factory test mode which is set at the de-assertion of the reset line based on the RXER (KSZ8081RNA/RND) or TXC (KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a pull-up, the factory test mode should be cleared by manually writing a 0 (according to the datasheet). This patch makes sure this factory test bit is cleared in config_init(). Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28net: phy: avoid unneeded MDIO reads in genphy_read_statusHeiner Kallweit
Considering that in polling mode each link drop will be latched, settings can't have changed if link was up and is up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Introduce BPF socket local storage map so that BPF programs can store private data they associate with a socket (instead of e.g. separate hash table), from Martin. 2) Add support for bpftool to dump BTF types. This is done through a new `bpftool btf dump` sub-command, from Andrii. 3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which was currently not supported since skb was used to lookup netns, from Stanislav. 4) Add an opt-in interface for tracepoints to expose a writable context for attached BPF programs, used here for NBD sockets, from Matt. 5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel. 6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to support tunnels such as sit. Add selftests as well, from Willem. 7) Various smaller misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27cxgb4: Delete all hash and TCAM filters before resource cleanupVishal Kulkarni
During driver unload, hash/TCAM filter deletion doesn't wait for completion.This patch deletes all the filters with completion before clearing the resources. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: dsa: mv88e6xxx: Remove legacy probe supportAndrew Lunn
Remove the legacy method of probing the mv88e6xxx driver, now that all the mainline boards have been converted to use mdio based probing for a number of cycles. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: dsa: mv88e6060: Replace REG_READ macroAndrew Lunn
The REG_READ macro contains a return statement, making it not very safe. Remove it by inlining the code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: dsa: mv88e6060: Replace REG_WRITE macroAndrew Lunn
The REG_WRITE macro contains a return statement, making it not very safe. Remove it by inlining the code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: dsa: mv88e6060: Replace ds with privAndrew Lunn
Pass around priv, not ds. This will help with changing to an mdio driver, and makes this driver more like mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: dsa: mv88e6060: Add SPDX headerAndrew Lunn
Add an SPDX header, and remove the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27ibmvnic: Add device identification to requested IRQsMurilo Fossa Vicentini
The ibmvnic driver currently uses the same fixed name when using request_irq, this makes it hard to parse when multiple VNIC devices are available at the same time. This patch adds the unit_address as the device identification along with an id for each queue. The original idea was to use the interface name as an identifier, but it is not feasible given these requests happen at adapter probe, and at this point netdev is not yet registered so it doesn't have the proper name assigned to it. Signed-off-by: Murilo Fossa Vicentini <muvic@linux.ibm.com> Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27cpsw: Put back cpsw_ndo_poll_controller()David S. Miller
To fix the build. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: move ethtool func in separate fileGrygorii Strashko
As a preparatory patch to add support for a switchdev based cpsw driver, move common ethtool functions to separate cpsw-ethtool.c file so that they can be used across both drivers. It will simplify CPSW driver code maintenance also. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: switch to use mac sl apiGrygorii Strashko
Switch CPSW driver to use the new MAC SL API. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: introduce mac sl module apiGrygorii Strashko
The MAC SL submodule has a lot of common functions between many of TI SoCs AM335x/AM437x/DRA7(AM57xx), Keystone 2 66AK2HK/E/L/G and K3 AM654, but there are also differences especially in registers offsets and sets of supported functions. This patch introduces the MAC SL submodule API which is intended to provide a common way to access the MAC SL submodule and hide HW integrations details. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: move common hw init code in separate funcGrygorii Strashko
move common hw init code in separate function as preparation for adding new switchdev driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: davinci_cpdma: use dma_addr_t for desc_mem_phys and ↵Grygorii Strashko
desc_hw_addr Use dma_addr_t for desc_mem_phys and desc_hw_addr to avoid types conversions. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: move cpsw definitions in priv headerGrygorii Strashko
As a preparatory patch to add a switchdev based cpsw driver move the common header definitions to cpsw_priv.h. The plan is to develop a new driver on switchdev driver model and obsolete the current cpsw driver after all required functions are added to the new driver. This patch allows the same header file to be re-used on both drivers during the transition period. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: refactor probe to group common hw initializationGrygorii Strashko
Rework probe to group common hw initialization: - group resources request at the beginning of the probe - move net device initialization and registration at the end of the probe - drop cpsw_slave_init as preparation of refactoring of common hw initialization code to separate function. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: davinci_mdio: use devm_ioremap()Grygorii Strashko
The Davinci MDIO in most of the case implemented as module inside of TI CPSW subsystem and fully depends on CPSW to be enabled, but historically it's implemented as separate Platform device/driver and defined in DT files in two ways: - as standalone node - as child node of CPSW subsystem. In later case it's required to split CPSW subsystem "reg" property to exclude MDIO I/O range which is not useful. Hence, replace devm_ioremap_resource() with devm_ioremap() to allow define full I/O range in parent CPSW subsystem without spliting. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: ale: do not auto delete mcast super entriesGrygorii Strashko
Do not delete multicast supervisory packet's (SUPER) entries while flushing multicast addresses from ALE table cpsw_ale_flush_multicast(). Those entries have to be added/removed only explicitly. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: fix allmulti cfg in dual_mac modeGrygorii Strashko
Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is working in non dual_mac mode, but in dual_mac - it causes enabling/disabling ALLMULTI flag for both ports. Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to specify ALE port number for which ALLMULTI has to be enabled and check if port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: ale: use define for host port in cpsw_ale_set_allmulti()Grygorii Strashko
Use ALE_PORT_HOST define for host port in cpsw_ale_set_allmulti() instead of constants. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: ale: fix mcast super settingGrygorii Strashko
Use correct define ALE_SUPER for ALE Multicast Address Table Entry Supervisory Packet (SUPER) bit setting instead of ALE_BLOCKED. No issues were observed till now as it have never been set, but it's going to be used by new CPSW switch driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit()Grygorii Strashko
Drop unnecessary wrapper function cpsw_tx_packet_submit() which is used only in one place. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs()Grygorii Strashko
Use devm_alloc_etherdev_mqs() and simplify code. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state callGrygorii Strashko
Drop pinctrl_pm_select_default_state call from probe as default pinctrl state is set by DD core. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: use local var dev in probeGrygorii Strashko
Use local variable struct device *dev in probe to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_commonGrygorii Strashko
Update cpsw_split_res() to accept struct cpsw_common instead of struct net_device to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE config optionGrygorii Strashko
All TI drivers CPSW/NETCP can't work without ALE, hence simplify build of those drivers by always linking cpsw_ale and drop CONFIG_TI_CPSW_ALE config option. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config optionGrygorii Strashko
Both drivers CPSW and EMAC can't work without CPDMA, hence simplify build of those drivers by always linking davinci_cpdma and drop TI_DAVINCI_CPDMA config option. Note. the davinci_emac driver module was changed to "ti_davinci_emac" to make build work. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27net: ethernet: ti: convert to SPDX license identifiersGrygorii Strashko
Replace textual license with SPDX-License-Identifier. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27genetlink: optionally validate strictly/dumpsJohannes Berg
Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26nbd: add tracepoints for send/receive timingAndrew Hall
This adds four tracepoints to nbd, enabling separate tracing of payload and header sending/receipt. In the send path for headers that have already been sent, we also explicitly initialize the handle so it can be referenced by the later tracepoint. Signed-off-by: Andrew Hall <hall@fb.com> Signed-off-by: Matt Mullins <mmullins@fb.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 20:48:21 +0000