| Age | Commit message (Collapse) | Author |
|---|
|
s/PAGE_SIZE/PAGE_MASK/
Luckily release_offset is never larger than PAGE_SIZE, so the bug has no
bad side effects and managed to stay unnoticed for years that way ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180418054257.15388-2-kraxel@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
The reverted commit broke LVDS output on TBS A711 Tablet. That tablet
has simple-panel node that has fixed pixel clock-frequency that A83T
SoC used in the tablet can't generate exactly.
Requested rate is 52000000 and rounded_rate is calculated as 51857142.
It's close enough for it to work in practice, but with strict check
in the reverted commit, the mode is rejected needlessly in this case.
DT allows to specify a range of values for simple-panel/clock-frequency,
but driver doesn't respect that ATM. Given that TBS A711 is the single
user of sun4i-lvds driver, let's revert that commit for now, until
a better solution for the problem is found.
Also see: https://patchwork.kernel.org/patch/9446385/ for relevant
discussion (or search for "[RFC] drm/sun4i: rgb: Add 5% tolerance
to dot clock frequency check").
Fixes: e4e4b7ad50cf ("drm/sun4i: add lvds mode_valid function")
Reported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421045155.15332-1-megous@megous.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
"A few small dma-mapping fixes for Linux 4.17-rc3:
- don't loop to try GFP_DMA allocations if ZONE_DMA is not actually
enabled (regression in 4.16)
- don't try to do virt_to_page before we know we actuall have a valid
page in dma_common_mmap
- a comment fixup related to the above fix"
* tag 'dma-mapping-4.17-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: postpone cpu addr translation on mmap
dma-coherent: clarify dma_mmap_from_dev_coherent documentation
dma-direct: don't retry allocation for no-op GFP_DMA
|
|
When out of memory and we can't add ctrl vq buffers,
probe fails. Unfortunately the error handling is
out of spec: it calls del_vqs without bothering
to reset the device first.
To fix, call the full cleanup function in this case.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Will make it reusable for error handling.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We now cleanup all VQs on device removal - no need
to handle the control VQ specially.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Console driver is out of spec. The spec says:
A driver MUST NOT decrement the available idx on a live
virtqueue (ie. there is no way to “unexpose” buffers).
and it does exactly that by trying to detach unused buffers
without doing a device reset first.
Defer detaching the buffers until device unplug.
Of course this means we might get an interrupt for
a vq without an attached port now. Handle that by
discarding the consumed buffer.
Reported-by: Tiwei Bie <tiwei.bie@intel.com>
Fixes: b3258ff1d6 ("virtio: Decrement avail idx on buffer detach")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
an allocated buffer doesn't need to be tied to a vq -
only vq->vdev is ever used. Pass the function the
just what it needs - the vdev.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Including:
- Fixup outdated kernel-doc paths
- Slightly too short title underline
- Some typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When printing the driver_override parameter when it is 4095 and 4094
bytes long, the printing code would access invalid memory because we
need count + 1 bytes for printing.
Cfr. commits 4efe874aace57dba ("PCI: Don't read past the end of sysfs
"driver_override" buffer") and bf563b01c2895a4b ("driver core: platform:
Don't read past the end of "driver_override" buffer").
Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver_override implementation is susceptible to a race condition
when different threads are reading vs storing a different driver
override. Add locking to avoid this race condition.
Cfr. commits 6265539776a0810b ("driver core: platform: fix race
condition with driver_override") and 9561475db680f714 ("PCI: Fix race
condition with driver_override").
Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extended fix to: "Don't read EDID in atomic_check"
Fix issue of missing dc_sink in .mode_valid in hot plug routine.
Need to check dc_sink everytime in .get_modes hook after checking
edid, since edid is not getting removed in hot unplug but dc_sink
doesn't.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Extended fix to: "Don't read EDID in atomic_check"
Fix display property not observed in GUI display after hot plug.
Call drm_mode_connector_update_edid_property every time in
.get_modes hook, due to the fact that edid property is getting
removed from usermode ioctl DRM_IOCTL_MODE_GETCONNECTOR each time
in hot unplug.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We shouldn't attempt to read EDID in atomic_check. We really shouldn't
even be modifying the connector object, or any other non-state object,
but this is a start at least.
Moving EDID cleanup to dm_dp_mst_connector_destroy from
dm_dp_destroy_mst_connector to ensure the EDID is still available for
headless mode.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The below commit
"drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"
introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.
Since DC is currently not equipped to handle this we need to fail such
a commit, otherwise we might see a corrupted screen.
This is based on Shirish's previous approach but avoids adding all
planes to the new atomic state which leads to a full update in DC for
any commit, and is not what we intend.
Theoretically DM should be able to deal with states with fully populated planes,
even for simple updates, such as cursor updates. This should still be
addressed in the future.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Lock irq table when reading a work in queue,
unlock to flush the work, lock again till all tasks
are cleared
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
syzbot is reporting crashes triggered by memory allocation fault injection
at tty_ldisc_get() [1]. As an attempt to handle OOM in a graceful way, we
have tried commit 5362544bebe85071 ("tty: don't panic on OOM in
tty_set_ldisc()"). But we reverted that attempt by commit a8983d01f9b7d600
("Revert "tty: don't panic on OOM in tty_set_ldisc()"") due to reproducible
crash. We should spend resource for finding and fixing race condition bugs
rather than complicate error paths for 2 * sizeof(void *) bytes allocation
failure.
[1] https://syzkaller.appspot.com/bug?id=489d33fa386453859ead58ff5171d43772b13aa3
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enable k10temp for AMD Ryzen APUs w/ Vega Mobile Gfx.
Based on patch from René Rebe <rene@exactcode.de>. Dropped temperature
offsets since those are not supposed to apply for the affected CPUs.
Cc: stable@vger.kernel.org # v4.16+
Cc: René Rebe <rene@exactcode.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Ryzen 2700X has a temperature offset of 10 degrees C. If bit 19 of the
Temperature Control register is set, there is an additional offset of
49 degrees C. Take this into account as well.
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
dwc3_ep_dequeue() waits for completion of End Transfer command using
wait_event_lock_irq(), which will release the dwc3->lock while waiting
and reacquire after completion. This allows a potential race condition
with ep_disable() which also removes all requests from started_list
and pending_list.
The check for NULL r->trb should catch this but currently it exits to
the wrong 'out1' label which calls dwc3_gadget_giveback(). Since its
list entry was already removed, if CONFIG_DEBUG_LIST is enabled a
'list_del corruption' bug is thrown since its next/prev pointers are
already LIST_POISON1/2. If r->trb is NULL it should simply exit to
'out0'.
Fixes: cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Fixes the following sparse warning:
drivers/usb/dwc3/gadget.c:169:6: warning:
symbol 'dwc3_gadget_del_and_unmap_request' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Fix to return error code -ENOMEM from the alloc fail error handling
case instead of 0, as done elsewhere in this function.
Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe")
Reviewed-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
By clearing NAK status of EP, core will send ZLP
to IN token and assert NAK interrupt relying
on TxFIFO status only.
The WA applies only to core versions from 2.72a
to 4.00a (including both). Also for FS_IOT_1.00a
and HS_IOT_1.00a.
Signed-off-by: Artur Petrosyan <arturp@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
devm_regulator_get_optional returns -ENODEV if the regulator isn't
there, so if that's the case we have to make sure not to leave -ENODEV
in the regulator pointer.
Also, make sure we return 0 in that case, but correctly propagate any
other errors. Also propagate the error from _dwc2_hcd_start.
Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply")
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
If the initial fbdev configuration (intel_fbdev_initial_config()) runs
and there still no sink connected it will cause
drm_fb_helper_initial_config() to return 0 as no error happened (but
internally the return is -EAGAIN). Because no framebuffer was
allocated, when a sink is connected intel_fbdev_output_poll_changed()
will not execute drm_fb_helper_hotplug_event() that would trigger
another try to do the initial fbdev configuration.
So here allowing drm_fb_helper_hotplug_event() to be executed when there
is no framebuffer allocated and fbdev was not set up yet.
This issue also happens when a MST DP sink is connected since boot, as
the MST topology is discovered in parallel if
intel_fbdev_initial_config() is executed before the first sink MST is
discovered it will cause this same issue.
This is a follow-up patch of
https://patchwork.freedesktop.org/patch/196089/
Changes from v1:
- not creating a dump framebuffer anymore, instead just allowing
drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: frederik <frederik.schwan@linux.com> # 4.15.17
Tested-by: Ian Pilcher <arequipeno@gmail.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com
(cherry picked from commit df9e6521749ab33cde306e8a4350b0ac7889220a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We use jiffies to determine when wait expires. However
Imre did find out that jiffies can and will do a >1
increments on certain situations [1]. When this happens
in a wait_for loop, we return timeout errorneously
much earlier than what the real wallclock would say.
We can't afford our waits to timeout prematurely.
Discard jiffies and change to ktime to detect timeouts.
v2: added bugzilla entry (Imre), added stable (Chris)
Reported-by: Imre Deak <imre.deak@intel.com>
References: https://lkml.org/lkml/2018/4/18/798 [1]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 3085982c6b45d7d22f76e3aa018affbc143a7370)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
On systems without sufficient boot randomness, no point spamming dmesg.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
The OPAL RTC driver does not sleep in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware, which causes large scheduling
latencies, up to 50 seconds have been observed here when RTC stops
responding (BMC reboot can do it).
Fix this by converting it to the standard form OPAL_BUSY loop that
sleeps.
Fixes: 628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Otherwise, the SQ may skip some of the register writes, or shader waves may
be allocated where we don't expect them, so that as a result we don't actually
reset all of the register SRAMs. This can lead to spurious ECC errors later on
if a shader uses an uninitialized register.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Pull networking fixes from David Miller:
1) Fix rtnl deadlock in ipvs, from Julian Anastasov.
2) s390 qeth fixes from Julian Wiedmann (control IO completion stalls,
bad MAC address update sequence, request side races on command IO
timeouts).
3) Handle seq_file overflow properly in l2tp, from Guillaume Nault.
4) Fix VLAN priority mappings in cpsw driver, from Ivan Khoronzhuk.
5) Packet scheduler ife action fixes (malformed TLV lengths, etc.) from
Alexander Aring.
6) Fix out of bounds access in tcp md5 option parser, from Jann Horn.
7) Missing netlink attribute policies in rtm_ipv6_policy table, from
Eric Dumazet.
8) Missing socket address length checks in l2tp and pppoe connect, from
Guillaume Nault.
9) Fix netconsole over team and bonding, from Xin Long.
10) Fix race with AF_PACKET socket state bitfields, from Willem de
Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
ice: Fix insufficient memory issue in ice_aq_manage_mac_read
sfc: ARFS filter IDs
net: ethtool: Add missing kernel doc for FEC parameters
packet: fix bitfield update race
ice: Do not check INTEVENT bit for OICR interrupts
ice: Fix incorrect comment for action type
ice: Fix initialization for num_nodes_added
igb: Fix the transmission mode of queue 0 for Qav mode
ixgbevf: ensure xdp_ring resources are free'd on error exit
team: fix netconsole setup over team
amd-xgbe: Only use the SFP supported transceiver signals
amd-xgbe: Improve KR auto-negotiation and training
amd-xgbe: Add pre/post auto-negotiation phy hooks
pppoe: check sockaddr length in pppoe_connect()
l2tp: check sockaddr length in pppol2tp_connect()
net: phy: marvell: clear wol event before setting it
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
tcp: don't read out-of-bounds opsize
ibmvnic: Clean actual number of RX or TX pools
...
|
|
Commit 5928c281524f (ACPI / video: Default lcd_only to true on Win8-ready
and newer machines) made only_lcd default to true on all machines where
acpi_osi_is_win8() returns true, including laptops.
The purpose of this is to avoid the bogus / non-working acpi backlight
interface which many newer BIOS-es define on desktop machines.
But this is causing a regression on some laptops, specifically on the
Dell XPS 13 2013 model, which does not have the LCD flag set for its
fully functional ACPI backlight interface.
Rather then DMI quirking our way out of this, this commits changes the
logic for setting only_lcd to true, to only do this on machines with
a desktop (or server) dmi chassis-type.
Note that we cannot simply only check the chassis-type and not register
the backlight interface based on that as there are some laptops and
tablets which have their chassis-type set to "3" aka desktop. Hopefully
the combination of checking the LCD flag, but only on devices with
a desktop(ish) chassis-type will avoid the needs for DMI quirks for this,
or at least limit the amount of DMI quirks which we need to a minimum.
Fixes: 5928c281524f (ACPI / video: Default lcd_only to true on Win8-ready and newer machines)
Reported-and-tested-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-04-24
This series contains fixes to ixgbevf, igb and ice drivers.
Colin Ian King fixes the return value on error for the new XDP support
that went into ixgbevf for 4.17.
Vinicius provides a fix for queue 0 for igb, which was not receiving all
the credits it needed when QAV mode was enabled.
Anirudh provides several fixes for the new ice driver, starting with
properly initializing num_nodes_added to zero. Fixed up a code comment
to better reflect what is really going on in the code. Fixed how to
detect if an OICR interrupt has occurred to a more reliable method.
Md Fahad fixes the ice driver to allocate the right amount of memory
when reading and storing the devices MAC addresses. The device can have
up to 2 MAC addresses (LAN and WoL), while WoL is currently not
supported, we need to ensure it can be properly handled when support is
added.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the MAC read operation, the device can return up to two (LAN and WoL)
MAC addresses. Without access to adequate memory, the device will return
an error. Fixed this by allocating the right amount of memory. Also, logic
to detect and copy the LAN MAC address into the port_info structure has
been added. Note that the WoL MAC address is ignored currently as the WoL
feature isn't supported yet.
Fixes: dc49c7723676 ("ice: Get MAC/PHY/link info and scheduler topology")
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Associate an arbitrary ID with each ARFS filter, allowing to properly query
for expiry. The association is maintained in a hash table, which is
protected by a spinlock.
v3: fix build warnings when CONFIG_RFS_ACCEL is disabled (thanks lkp-robot).
v2: fixed uninitialised variable (thanks davem and lkp-robot).
Fixes: 3af0f34290f6 ("sfc: replace asynchronous filter operations")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the hardware spec, checking the INTEVENT bit isn't a
reliable way to detect if an OICR interrupt has occurred. This is
because this bit can be cleared by the hardware/firmware before the
interrupt service routine has run. So instead, just check for OICR
events every time.
Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt")
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
We can do a sleeping allocation from an irq context when CONFIG_NUMA
is enabled. Fix this by initializing the NUMA crng instances in a
workqueue.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+9de458f6a5e713ee8c1a@syzkaller.appspotmail.com
Fixes: 8ef35c866f8862df ("random: set up the NUMA crng instances...")
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Action type 5 defines large action generic values. Fix comment to
reflect that better.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
ice_sched_add_nodes_to_layer is used recursively, and so we start
with num_nodes_added being 0. This way, in case of an error or if
num_nodes is NULL, the function just returns 0 to indicate that no
nodes were added.
Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When Qav mode is enabled, queue 0 should be kept on Stream Reservation
mode. From the i210 datasheet, section 8.12.19:
"Note: Queue0 QueueMode must be set to 1b when TransmitMode is set to
Qav." ("QueueMode 1b" represents the Stream Reservation mode)
The solution is to give queue 0 the all the credits it might need, so
it has priority over queue 1.
A situation where this can happen is when cbs is "installed" only on
queue 1, leaving queue 0 alone. For example:
$ tc qdisc replace dev enp2s0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 0
$ tc qdisc replace dev enp2s0 parent 100:2 cbs locredit -1470 \
hicredit 30 sendslope -980000 idleslope 20000 offload 1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.
Taken from cfi_cmdset_0001 driver.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Some Micron chips does not work well wrt Erase suspend for
boot blocks. This avoids the issue by not allowing Erase suspend
for the boot blocks for the 28F00AP30(1GBit) chip.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Currently it is possible to read and/or write to suspend EB's.
Writing /dev/mtdX or /dev/mtdblockX from several processes may
break the flash state machine.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
The current error handling for failed resource setup for xdp_ring
data is a break out of the loop and returning 0 indicated everything
was OK, when in fact it is not. Fix this by exiting via the
error exit label err_setup_tx that will clean up the resources
correctly and return and error status.
Detected by CoverityScan, CID#1466879 ("Logically dead code")
Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The same fix in Commit dbe173079ab5 ("bridge: fix netconsole
setup over bridge") is also needed for team driver.
While at it, remove the unnecessary parameter *team from
team_port_enable_netpoll().
v1->v2:
- fix it in a better way, as does bridge.
Fixes: 0fb52a27a04a ("team: cleanup netpoll clode")
Reported-by: João Avelino Bellomo Filho <jbellomo@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modules such as nouveau.ko and i915.ko have a link time dependency on
acpi_lid_open(), and due to its use of acpi_bus_register_driver(),
the button.ko module that provides it is only loadable when booted in
ACPI mode. However, the ACPI button driver can be built into the core
kernel as well, in which case the dependency can always be satisfied,
and the dependent modules can be loaded regardless of whether the
system was booted in ACPI mode or not.
So let's fix this asymmetry by making the ACPI button driver loadable
as a module even if not booted in ACPI mode, so it can provide the
acpi_lid_open() symbol in the same way as when built into the kernel.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ rjw: Minor adjustments of comments, whitespace and names. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When CONFIG_MMU_NOTIFIER is not enabled, struct mmu_notifier has an
incomplete type definition, which causes build errors.
../drivers/gpu/drm/amd/amdkfd/kfd_priv.h:607:22: error: field 'mmu_notifier' has incomplete type
../include/linux/kernel.h:979:32: error: dereferencing pointer to incomplete type
../include/linux/kernel.h:980:18: error: dereferencing pointer to incomplete type
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:434:2: error: implicit declaration of function 'mmu_notifier_unregister_no_release' [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:435:2: error: implicit declaration of function 'mmu_notifier_call_srcu' [-Werror=implicit-function-declaration]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:438:21: error: variable 'kfd_process_mmu_notifier_ops' has initializer but incomplete type
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: error: unknown field 'release' specified in initializer
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: warning: excess elements in struct initializer [enabled by default]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:439:2: warning: (near initialization for 'kfd_process_mmu_notifier_ops') [enabled by default]
../drivers/gpu/drm/amd/amdkfd/kfd_process.c:534:2: error: implicit declaration of function 'mmu_notifier_register' [-Werror=implicit-function-declaration]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This debug code was helpful while developing the driver, but it isn't
being used for anything anymore.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently if a user requests clock counters for a node without a GPU
resource we will always return EINVAL.
Instead if no GPU resource is attached, fill the gpu_clock_counter
argument with zeroes so that we may proceed and return valid CPU
counters.
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Passing NULL pointer to PTR_ERR will result in return value of 0
indicating success which is clearly not what it is intended here.
This patch returns -EINVAL instead.
v2: change ret code to -ENODEV
Fixes: 5ec7e02854b3 ("drm/amdkfd: Add ioctls for GPUVM memory management")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
