summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-01-14net: dsa: mv88e6xxx: Decode VTU problem interruptAndrew Lunn
When there is a problem with the VTU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: dsa: mv88e6xxx: Decode ATU problem interruptAndrew Lunn
When there is a problem with the ATU, an interrupt can be generated. Trap this interrupt and decode the registers to determine what the problem was, then log the error. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14mlxsw: spectrum_router: Add support for IPv6 non-equal-cost multipathIdo Schimmel
Since commit eb789980d0aa ("mlxsw: spectrum_router: Populate adjacency entries according to weights") the driver includes support for non-equal-cost multipath, but IPv4 nexthops were the only user. Now that the kernel supports weighted IPv6 nexthops, we can extend the driver to support it as well. This is done by assigning each nexthop its configured weight, so that it will be populated accordingly in the device's adjacency table. The `weight` parameter is also taken into account when comparing nexthop groups in order not to consolidate non-identical groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14net: netsec: use dma_addr_t for storing dma addressArnd Bergmann
On targets that have different sizes for phys_addr_t and dma_addr_t, we get a type mismatch error: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_alloc_dring': drivers/net/ethernet/socionext/netsec.c:970:9: error: passing argument 3 of 'dma_zalloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The code is otherwise correct, as the address is never actually used as a physical address but only passed into a DMA register. For consistently, I'm changing the variable name as well, to clarify that this is a DMA address. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: check for NULL function pointer in hns3_nic_set_featuresJian Shen
It's necessary to check hook whether being defined before calling, improve the reliability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add feature check when feature changedJian Shen
Local variable "changed" was defined to indicates features changed, but was used only for feature NETIF_F_HW_VLAN_CTAG_RX. Add checking for other features. Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add int_gl_idx setup for TX and RX queuesFuyun Liang
If the int_gl_idx does not be set, the default interrupt coalesce index is 0. The TX queues and the RX queues will both use the GL0 as the interrupt coalesce GL switch. But it should be GL1 for TX queues and GL0 for RX queues. This patch adds the int_gl_idx setup for TX queues and RX queues. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: change the unit of GL value macroFuyun Liang
Previously, driver used 2us as the GL unit. The time unit ethtool command "-c" and "-C" use is 1us, so now the GL unit driver uses actually is 1us. This patch changes the unit of GL value macro from 2us to 1us. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: remove unused GL setup functionFuyun Liang
Since the TX GL and the RX GL need to be set separately, hns3_set_vector_coalesc_gl() has been replaced with hns3_set_vector_coalesce_rx_gl() and hns3_set_vector_coalesce_tx_gl(). This patch removes hns3_set_vector_coalesc_gl(). Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: refactor GL update functionFuyun Liang
The GL update function uses the max GL value between tx_int_gl and rx_int_gl to set both new tx_int_gl and new rx_int_gl. Therefore, User can not enable TX GL self-adaptive or RX GL self-adaptive individually. This patch refactors the code to update the TX GL and the RX GL separately, making user can enable TX GL self-adaptive or RX GL self-adaptive individually. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: refactor interrupt coalescing init functionFuyun Liang
In the hardware, the coalesce configurable registers include GL0, GL1, GL2. In the driver, the TX queues use the register GL1 and the RX queues use the register GL0. This function initializes the configuration of the interrupt coalescing, but does not distinguish between the TX direction and the RX direction. It will cause some confusion. This patch refactors the function to initialize the TX GL and the RX GL separately. And the initialization of related variables also is added to this patch. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.set_coalesce support to PFFuyun Liang
This patch adds ethtool_ops.set_coalesce support to PF. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.get_coalesce support to PFFuyun Liang
This patch adds ethtool_ops.get_coalesce support to PF. Whilst our hardware supports per queue values, external interfaces support only a single shared value. As such we use the values for queue 0. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: remove TSO config command from VF driverPeng Li
Only main PF can config TSO MSS length according to hardware. This patch removes TSO config command from VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-12net: hns3: add ethtool_ops.get_channels support for VFPeng Li
This patch supports the ethtool's get_channels() for VF. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
BPF alignment tests got a conflict because the registers are output as Rn_w instead of just Rn in net-next, and in net a fixup for a testcase prohibits logical operations on pointers before using them. Also, we should attempt to patch BPF call args if JIT always on is enabled. Instead, if we fail to JIT the subprogs we should pass an error back up and fail immediately. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id
2018-01-11Merge tag 'gpio-v4.15-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly" * tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
2018-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-01-11 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various BPF related improvements and fixes to nfp driver: i) do not register XDP RXQ structure to control queues, ii) round up program stack size to word size for nfp, iii) restrict MTU changes when BPF offload is active, iv) add more fully featured relocation support to JIT, v) add support for signed compare instructions to the nfp JIT, vi) export and reuse verfier log routine for nfp, and many more, from Jakub, Quentin and Nic. 2) Fix a syzkaller reported GPF in BPF's copy_verifier_state() when we hit kmalloc failure path, from Alexei. 3) Add two follow-up fixes for the recent XDP RXQ series: i) kvzalloc() allocated memory was only kfree()'ed, and ii) fix a memory leak where RX queue was not freed in netif_free_rx_queues(), from Jakub. 4) Add a sample for transferring XDP meta data into the skb, here it is used for setting skb->mark with the buffer from XDP, from Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-01-11 Here's likely the last bluetooth-next pull request for the 4.16 kernel. - Added support for Bluetooth on 2015+ MacBook (Pro) - Fix to QCA Rome suspend/resume handling - Two new QCA_ROME USB IDs in btusb - A few other minor fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe()Wei Yongjun
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11net: socionext: Fix error return code in netsec_netdev_open()Wei Yongjun
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11net: socionext: include linux/io.h to fix buildArnd Bergmann
I ran into a randconfig build failure: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_probe': drivers/net/ethernet/socionext/netsec.c:1583:17: error: implicit declaration of function 'devm_ioremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration] Including linux/io.h directly fixes this. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-10 This series contains updates to i40e and i40evf only. Alice adds the displaying of priority xon/xoff packet stats, since we were already keeping track of them. Based on the recent changes, bump the driver versions. Jake changes how the driver determines whether or not the device is currently up to resolve the possible issue of freeing data structures and other memory before they have been fully allocated. Refactored the driver to simplify the locking behavior and to consistently use spinlocks instead of an overloaded bit lock to protect MAC and filter lists. Created a helper function which can convert the AdminQ link speed definition into a virtchnl definition. Colin Ian King cleans up a redundant variable initialization. Alex cleans up the driver to stop clearing the pending bit array for each vector manually, since it is prone to dropping an interrupt and based on the hardware specs, the pending bit array will be cleared automatically in MSI-X mode. Cleaned up flags for promiscuous mode to resolve an issue where enabling & disabling promiscuous mode on a VF would leave us in a high polling rate for the adminq task. Cleaned up code that was prone to race issues. Jingjing renames pipeline personalization profile (ppp) to dynamic device personalization (ddp) because it was being confused with the well known point to point protocol. Also removed checks for "track_id" being zero, since it is valid for it to be zero for profiles that do not have any 'write' commands. v2: cleaned up commit message for patch 12 based on feedback from Sergei Shtylyov and Alex Duyck v3: dropped patch 15 from the original series while Mariusz Stachura works on the changes that Jakub Kicinski has suggested ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11ibmvnic: Don't handle RX interrupts when not up.Nathan Fontenot
Initiating a kdump via the command line can cause a pending interrupt to be handled by the ibmvnic driver when initializing the sub-CRQ irqs during driver initialization. NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic] LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 Call Trace: [c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0 [c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90 [c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0 [c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250 [c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80 [c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0 [c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24 [c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120 [c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180 Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: implement ndo_features_checkGanesh Goudar
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: add support for vxlan segmentation offloadGanesh Goudar
add changes to t4_eth_xmit to enable vxlan segmentation offload support. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: implement udp tunnel callbacksGanesh Goudar
Implement ndo_udp_tunnel_add and ndo_udp_tunnel_del to support vxlan tunnelling. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11cxgb4: add data structures to support vxlanGanesh Goudar
Add data structures and macros to be used in vxlan offload. Original work by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
2018-01-10sfc: add bits for 25/50/100G supported/advertised speedsEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: support the ethtool ksettings API properly so that 25/50/100G worksEdward Cree
Store and handle ethtool link mode masks within the driver instead of just a single u32. However, quite a significant amount of existing code wants to manipulate the masks directly, and thus now uses the first unsigned long (i.e. mask[0]) as though it were a legacy u32 mask. This is ok because all the bits that code is interested in are in the first 32 bits of the mask; but it might be a good idea to change them in future to use the proper bitmap API. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sfc: basic MCDI mapping of 25/50/100G link speedsEdward Cree
Only handles direct speed setting, not autoneg, because the driver is still trying to pretend it uses the legacy ethtool API which doesn't have advertised/supported bits for 25/50/100G. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Remove qdisc before setting a new oneNogah Frankel
If a qdisc is being replaced by another qdisc of the same type, it can simply override over its configuration. However, if it replaces a qdisc of another type, it needs to be removed before setting the new qdisc. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Create a generic replace functionNogah Frankel
Create a generic qdisc replace function. For that goal, add three functions to the qdisc ops struct: * check_params: Checks if the given parameters are offloadable. * replace: Offload the given parameters. * clean_stats: clean the qdisc stats for the offloaded qdisc. integrate RED offloading into using the new internal replace API. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Create a generic destroy functionNogah Frankel
Add a destroy function to the qdiscs ops struct. Create a generic qdisc destroy function, that clears the qdisc metadata as well as calling the specific qdisc destroy function. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Add an ops structNogah Frankel
Qdisc struct have the Qdisc_class_ops struct. This patch introduces the similar ops struct for the mlxsw_sp_qdisc_ops struct. It allows better readability as well as code reusability for the common parts of some functions like destroy. The first operations to be added are the statistics getters. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Unite all handle checksNogah Frankel
Every qdisc op gets the qdisc handle ID as well as its location. Each one of them, beside replace, checks if the handle doesn't match the qdisc in the given location, and if so, it returns without running the actual op. Unite these checks to one comparison function and avoid sending the handle id to these ops. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Add tclass number to the mlxsw_sp_qdiscNogah Frankel
Tclass number is needed for most of the operations related to the qdisc in the driver. Create a field for it in the mlxsw_sp_qdisc instead of passing it to every function as parameter. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Make the clean stats function to be for RED onlyNogah Frankel
Improve readability by changing the clean stats function to handle only RED. Qdiscs that will be offloaded in the future will have a clean stats function of their own. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Clean qdisc statistics structsNogah Frankel
Clean RED offloaded stats and make them more generic by breaking the generic qdisc stats to a struct of their own. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: sch: red: Change offloaded xstats to be incrementalNogah Frankel
Change the value of the xstats requested from the driver for offloaded RED to be incremental, like the normal stats. It increases consistency - if a qdisc stops being offloaded its xstats don't change. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: sch: red: Change the name of the stats struct to be genericNogah Frankel
Change the name of the stats struct to be generic, so it could be used for other qdisc offload, that will be added in the next patches. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: qdiscs: Move qdisc's declarations to its designated fileNogah Frankel
Move all the qdisc related data from the spectrum.h to spectrum_qdisc.c. Create an init and fini functions for the qdiscs. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum: Fix typo in firmware upgrade messageIdo Schimmel
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: spectrum_qdisc: Don't use variable array in ↵Jiri Pirko
mlxsw_sp_tclass_congestion_enable Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: pci: Wait after reset before accessing HWYuval Mintz
After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net/mlx5e: fix error return code in mlx5e_alloc_rq()Wei Yongjun
Fix to return a negative error code from the xdp_rxq_info_reg() error handling case instead of 0, as done elsewhere in this function. Fixes: 0ddf543226ac ("xdp/mlx5: setup xdp_rxq_info") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10cxgb4vf: Fix SGE FL buffer initialization logic for 64K pagesArjun Vynipadath
We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7 cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10nfp: always unmask aux interrupts at initJakub Kicinski
The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 06:57:49 +0000