summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-14net: stmmac: fix taprio configuration when base_time is in the pastYannick Vignon
The Synopsys TSN MAC supports Qbv base times in the past, but only up to a certain limit. As a result, a taprio qdisc configuration with a small base time (for example when treating the base time as a simple phase offset) is not applied by the hardware and silently ignored. This was observed on an NXP i.MX8MPlus device, but likely affects all TSN-variants of the MAC. Fix the issue by making sure the base time is in the future, pushing it by an integer amount of cycle times if needed. (a similar check is already done in several other taprio implementations, see for example drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or drivers/net/dsa/sja1105/sja1105_ptp.h#L39). Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14net: stmmac: fix taprio schedule configurationYannick Vignon
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP i.MX8MPlus device, the effective cycle time differed from the requested one by N*96ns, with N number of entries in the Qbv Gate Control List. This is because the driver was adding a 96ns margin to each interval of the GCL, apparently to account for the IPG. The problem was observed on NXP i.MX8MPlus devices but likely affected all devices relying on the same configuration callback (dwmac 4.00, 4.10, 5.10 variants). Fix the issue by removing the margins, and simply setup the MAC with the provided cycle time value. This is the behavior expected by the user-space API, as altering the Qbv schedule timings would break standards conformance. This is also the behavior of several other Ethernet MAC implementations supporting taprio, including the dwxgmac variant of stmmac. Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14RDMA/cma: Fix error flow in default_roce_mode_storeNeta Ostrovsky
In default_roce_mode_store(), we took a reference to cma_dev, but didn't return it with cma_dev_put in the error flow. Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type") Link: https://lore.kernel.org/r/20210113130214.562108-1-leon@kernel.org Signed-off-by: Neta Ostrovsky <netao@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-14RDMA/mlx5: Fix wrong free of blue flame register on errorMark Bloch
If the allocation of the fast path blue flame register fails, the driver should free the regular blue flame register allocated a statement above, not the one that it just failed to allocate. Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") Link: https://lore.kernel.org/r/20210113121703.559778-6-leon@kernel.org Reported-by: Hans Petter Selasky <hanss@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-14IB/mlx5: Fix error unwinding when set_has_smi_cap failsParav Pandit
When set_has_smi_cap() fails, multiport master cleanup is missed. Fix it by doing the correct error unwinding goto. Fixes: a989ea01cb10 ("RDMA/mlx5: Move SMI caps logic") Link: https://lore.kernel.org/r/20210113121703.559778-3-leon@kernel.org Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-14RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()Aharon Landau
rounddown_pow_of_two() is undefined when the input is 0. Therefore we need to avoid it in ib_umem_find_best_pgsz and return 0. Otherwise, it could result in not rejecting an invalid page size which eventually causes a kernel oops due to the logical inconsistency. Fixes: 3361c29e9279 ("RDMA/umem: Use simpler logic for ib_umem_find_best_pgsz()") Link: https://lore.kernel.org/r/20210113121703.559778-2-leon@kernel.org Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-14dm crypt: defer decryption to a tasklet if interrupts disabledIgnat Korchagin
On some specific hardware on early boot we occasionally get: [ 1193.920255][ T0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 1193.936616][ T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69 [ 1193.953233][ T0] no locks held by swapper/69/0. [ 1193.965871][ T0] irq event stamp: 575062 [ 1193.977724][ T0] hardirqs last enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0 [ 1194.002762][ T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80 [ 1194.029035][ T0] softirqs last enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.054227][ T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.079389][ T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1 [ 1194.104103][ T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020 [ 1194.119591][ T0] Call Trace: [ 1194.130233][ T0] dump_stack+0x9a/0xcc [ 1194.141617][ T0] ___might_sleep.cold+0x180/0x1b0 [ 1194.153825][ T0] mempool_alloc+0x16b/0x300 [ 1194.165313][ T0] ? remove_element+0x160/0x160 [ 1194.176961][ T0] ? blk_mq_end_request+0x4b/0x490 [ 1194.188778][ T0] crypt_convert+0x27f6/0x45f0 [dm_crypt] [ 1194.201024][ T0] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1194.212906][ T0] ? module_assert_mutex_or_preempt+0x3e/0x70 [ 1194.225318][ T0] ? __module_address.part.0+0x1b/0x3a0 [ 1194.237212][ T0] ? is_kernel_percpu_address+0x5b/0x190 [ 1194.249238][ T0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt] [ 1194.261593][ T0] ? is_module_address+0x25/0x40 [ 1194.272905][ T0] ? static_obj+0x8a/0xc0 [ 1194.283582][ T0] ? lockdep_init_map_waits+0x26a/0x700 [ 1194.295570][ T0] ? __raw_spin_lock_init+0x39/0x110 [ 1194.307330][ T0] kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt] [ 1194.320496][ T0] ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt] [ 1194.333203][ T0] blk_update_request+0x6d7/0x1500 [ 1194.344841][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.356831][ T0] blk_mq_end_request+0x4b/0x490 [ 1194.367994][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.379693][ T0] flush_smp_call_function_queue+0x24b/0x560 [ 1194.391847][ T0] flush_smp_call_function_from_idle+0x59/0x80 [ 1194.403969][ T0] do_idle+0x287/0x450 [ 1194.413891][ T0] ? arch_cpu_idle_exit+0x40/0x40 [ 1194.424716][ T0] ? lockdep_hardirqs_on_prepare+0x286/0x3f0 [ 1194.436399][ T0] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 1194.447759][ T0] cpu_startup_entry+0x19/0x20 [ 1194.458038][ T0] secondary_startup_64_no_verify+0xb0/0xbb IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled. It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet (as is done with requests from hard irqs). Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-14HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth modeNicholas Miell
The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its product ID to the table so we can get battery monitoring support. (The hid-logitech-hidpp driver already recognizes it when connected via a Unifying Receiver.) [jkosina@suse.cz: fix whitespace damage] Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-14drm/amdgpu: add new device id for Reniormengwang
add DID 0x164C into pciidlist under CHIP_RENOIR family. Signed-off-by: mengwang <mengbing.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-01-14drm/amdgpu: add green_sardine device id (v2)Prike Liang
Add green_sardine PCI id support and map it to renoir asic type. v2: add apu flag Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-01-14drm/amdgpu: fix vram type and bandwidth error for DDR5 and DDR4Huang Rui
This patch is to update atomfirmware parser for the memory type and bandwidth of DDR5 and DDR4. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amdgpu/gfx10: add updated GOLDEN_TSC_COUNT_UPPER/LOWER register offsets ↵chen gong
for VGH The address of the GOLDEN_TSC_COUNT_UPPER/GOLDEN_TSC_COUNT_LOWER for Vnagogh are different from the others. The offset of the GOLDEN_TSC_COUNT_UPPER for Vangogh is 0x0025 by calculation. The offset of the GOLDEN_TSC_COUNT_LOWER for Vangogh is 0x0026 by calculation. Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()Jeremy Cline
KASAN reported a slab-out-of-bounds read of size 1 in kdf_create_vcrat_image_cpu(). This occurs when, for example, when on an x86_64 with a single NUMA node because kfd_fill_iolink_info_for_cpu() is a no-op, but afterwards the sub_type_hdr->length, which is out-of-bounds, is read and multiplied by entries. Fortunately, entries is 0 in this case so the overall crat_table->length is still correct. Check if there were any entries before de-referencing sub_type_hdr which may be pointing to out-of-bounds memory. Fixes: b7b6c38529c9 ("drm/amdkfd: Calculate CPU VCRAT size dynamically (v2)") Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"Rodrigo Siqueira
commit a861736dae64 ("drm/amd/display: Fixed Intermittent blue screen on OLED panel") causes power regression for many users. It seems that this change causes the MCLK to get forced high; this creates a regression for many users since their devices were not able to drop to a low state after this change. For this reason, this reverts commit a861736dae644a0d7abbca0c638ae6aad28feeb8. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407 Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Naveed Ashfaq <Naveed.Ashfaq@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Roman Li <roman.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-01-14drm/amd/display: disable dcn10 pipe split by defaultLi, Roman
[Why] The initial purpose of dcn10 pipe split is to support some high bandwidth mode which requires dispclk greater than max dispclk. By initial bring up power measurement data, it showed power consumption is less with pipe split for dcn block. This could be reason for enable pipe split by default. By battery life measurement of some Chromebooks, result shows battery life is longer with pipe split disabled. [How] Disable pipe split by default. Pipe split could be still enabled when required dispclk is greater than max dispclk. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amd/display: Add a missing DCN3.01 API mappingNikola Cornij
[why] Required for DSC MST Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amd/display: Initialize stack variableWesley Chalmers
[WHY] The stack variable "val" is potentially unpopulate it, so initialize it with the value 0xf (indicating an invalid mux) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amd/display: NULL pointer hangQingqing Zhuo
[Why] In dc_link_dp_set_test_pattern, we assume all pipes have a stream, which can cause null pointer dereference. [How] Add a null pointer check before accessing stream. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amdgpu/psp: fix psp gfx ctrl cmdsVictor Zhao
psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux, according to psp, linux cmds are not correct. v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Emily.Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-14drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)Alexandre Demers
This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in amdgpu_device_asic_has_dc_support(). This info should be only called once. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921 Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-01-13net: stmmac: Fixed mtu channged by cache alignedDavid Wu
Since the original mtu is not used when the mtu is updated, the mtu is aligned with cache, this will get an incorrect. For example, if you want to configure the mtu to be 1500, but mtu 1536 is configured in fact. Fixed: eaf4fac478077 ("net: stmmac: Do not accept invalid MTU values") Signed-off-by: David Wu <david.wu@rock-chips.com> Link: https://lore.kernel.org/r/20210113034109.27865-1-david.wu@rock-chips.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13cxgb4/chtls: Fix tid stuck due to wrong update of qidAyush Sawal
TID stuck is seen when there is a race in CPL_PASS_ACCEPT_RPL/CPL_ABORT_REQ and abort is arriving before the accept reply, which sets the queue number. In this case HW ends up sending CPL_ABORT_RPL_RSS to an incorrect ingress queue. V1->V2: - Removed the unused variable len in chtls_set_quiesce_ctrl(). V2->V3: - As kfree_skb() has a check for null skb, so removed this check before calling kfree_skb() in func chtls_send_reset(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Link: https://lore.kernel.org/r/20210112053600.24590-1-ayush.sawal@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13i40e: fix potential NULL pointer dereferencingCristian Dumitrescu
Currently, the function i40e_construct_skb_zc only frees the input xdp buffer when the output skb is successfully built. On error, the function i40e_clean_rx_irq_zc does not commit anything for the current packet descriptor and simply exits the packet descriptor processing loop, with the plan to restart the processing of this descriptor on the next invocation. Therefore, on error the ring next-to-clean pointer should not advance, the xdp i.e. *bi buffer should not be freed and the current buffer info should not be invalidated by setting *bi to NULL. Therefore, the *bi should only be set to NULL when the function i40e_construct_skb_zc is successful, otherwise a NULL *bi will be dereferenced when the work for the current descriptor is eventually restarted. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/r/20210111181138.49757-1-cristian.dumitrescu@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13Merge tag 'linux-can-fixes-for-5.11-20210113' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-13 The first patch is by Oliver Hartkopp for the CAn ISO-TP protocol and fixes a kernel information leak to userspace. The last patch is by Qinglang Miao for the mcp251xfd driver and fixes a NULL pointer check to work on the correct variable. * tag 'linux-can-fixes-for-5.11-20210113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check can: isotp: isotp_getname(): fix kernel information leak ==================== Link: https://lore.kernel.org/r/20210113212158.925513-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13net: stmmac: use __napi_schedule() for PREEMPT_RTSeb Laveze
Use of __napi_schedule_irqoff() is not safe with PREEMPT_RT in which hard interrupts are not disabled while running the threaded interrupt. Using __napi_schedule() works for both PREEMPT_RT and mainline Linux, just at the cost of an additional check if interrupts are disabled for mainline (since they are already disabled). Similar to the fix done for enetc commit 215602a8d212 ("enetc: use napi_schedule to be compatible with PREEMPT_RT") Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com> Link: https://lore.kernel.org/r/20210112140121.1487619-1-sebastien.laveze@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer checkQinglang Miao
If alloc_canfd_skb() returns NULL, 'cfg' is an uninitialized variable, so we should check 'skb' rather than 'cfd' after calling alloc_canfd_skb(priv->ndev, &cfd). Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210113073100.79552-1-miaoqinglang@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-13Merge tag 'sound-5.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are some piled fixes, hopefully the last big one for 5.11. All changes are device-specific small fixes, and majority of commits are for ASoC while USB-audio got a bit large changes for addressing the regression for devices with quirks" * tag 'sound-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits) ALSA: hda/hdmi - enable runtime pm for CI AMD display audio ALSA: firewire-tascam: Fix integer overflow in midi_port_work() ALSA: fireface: Fix integer overflow in transmit_midi_msg() ALSA: hda/tegra: fix tegra-hda on tegra30 soc clk: tegra30: Add hda clock default rates to clock driver ALSA: doc: Fix reference to mixart.rst ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices ALSA: usb-audio: Annotate the endpoint index in audioformat ALSA: usb-audio: Avoid unnecessary interface re-setup ALSA: usb-audio: Choose audioformat of a counter-part substream ALSA: usb-audio: Fix the missing endpoints creations for quirks ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395 ASoC: amd: Replacing MSI with Legacy IRQ model ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad E14 Gen 2 ASoC: meson: axg-tdm-interface: fix loopback ASoC: meson: axg-tdmin: fix axg skew offset ASoC: max98373: don't access volatile registers in bias level off ASoC: rt711: mutex between calibration and power state changes ASoC: Intel: haswell: Add missing pm_ops ...
2021-01-13xen: Set platform PCI device INTX affinity to CPU0David Woodhouse
With INTX or GSI delivery, Xen uses the event channel structures of CPU0. If the interrupt gets handled by Linux on a different CPU, then no events are seen as pending. Rather than introducing locking to allow other CPUs to process CPU0's events, just ensure that the PCI interrupts happens only on CPU0. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210106153958.584169-3-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-13xen: Fix event channel callback via INTX/GSIDavid Woodhouse
For a while, event channel notification via the PCI platform device has been broken, because we attempt to communicate with xenstore before we even have notifications working, with the xs_reset_watches() call in xs_init(). We tend to get away with this on Xen versions below 4.0 because we avoid calling xs_reset_watches() anyway, because xenstore might not cope with reading a non-existent key. And newer Xen *does* have the vector callback support, so we rarely fall back to INTX/GSI delivery. To fix it, clean up a bit of the mess of xs_init() and xenbus_probe() startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM case, deferring it to be called from xenbus_probe() in the XS_HVM case instead. Then fix up the invocation of xenbus_probe() to happen either from its device_initcall if the callback is available early enough, or when the callback is finally set up. This means that the hack of calling xenbus_probe() from a workqueue after the first interrupt, or directly from the PCI platform device setup, is no longer needed. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-13Revert "arm64: Enable perf events based hard lockup detector"Will Deacon
This reverts commit 367c820ef08082e68df8a3bc12e62393af21e4b5. lockup_detector_init() makes heavy use of per-cpu variables and must be called with preemption disabled. Usually, it's handled early during boot in kernel_init_freeable(), before SMP has been initialised. Since we do not know whether or not our PMU interrupt can be signalled as an NMI until considerably later in the boot process, the Arm PMU driver attempts to re-initialise the lockup detector off the back of a device_initcall(). Unfortunately, this is called from preemptible context and results in the following splat: | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 | caller is debug_smp_processor_id+0x20/0x2c | CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x3c0 | show_stack+0x20/0x6c | dump_stack+0x2f0/0x42c | check_preemption_disabled+0x1cc/0x1dc | debug_smp_processor_id+0x20/0x2c | hardlockup_detector_event_create+0x34/0x18c | hardlockup_detector_perf_init+0x2c/0x134 | watchdog_nmi_probe+0x18/0x24 | lockup_detector_init+0x44/0xa8 | armv8_pmu_driver_init+0x54/0x78 | do_one_initcall+0x184/0x43c | kernel_init_freeable+0x368/0x380 | kernel_init+0x1c/0x1cc | ret_from_fork+0x10/0x30 Rather than bodge this with raw_smp_processor_id() or randomly disabling preemption, simply revert the culprit for now until we figure out how to do this properly. Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Sumit Garg <sumit.garg@linaro.org> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-13xen/privcmd: allow fetching resource sizesRoger Pau Monne
Allow issuing an IOCTL_PRIVCMD_MMAP_RESOURCE ioctl with num = 0 and addr = 0 in order to fetch the size of a specific resource. Add a shortcut to the default map resource path, since fetching the size requires no address to be passed in, and thus no VMA to setup. This is missing from the initial implementation, and causes issues when mapping resources that don't have fixed or known sizes. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Tested-by: Andrew Cooper <andrew.cooper3@citrix.com> Cc: stable@vger.kernel.org # >= 4.18 Link: https://lore.kernel.org/r/20210112115358.23346-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-12bnxt_en: Clear DEFRAG flag in firmware message when retry flashing.Pavan Chebbi
When the FW tells the driver to retry the INSTALL_UPDATE command after it has cleared the NVM area, the driver is not clearing the previously used ALLOWED_TO_DEFRAG flag. As a result the FW tries to defrag the NVM area a second time in a loop and can fail the request. Fixes: 1432c3f6a6ca ("bnxt_en: Retry installing FW package under NO_SPACE error condition.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12bnxt_en: Improve stats context resource accounting with RDMA driver loaded.Michael Chan
The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts used by the RDMA driver correctly when the RDMA driver is freeing the MSIX vectors. It assumes that if the RDMA driver is registered, the additional stats contexts will be needed. This is not true when the RDMA driver is about to unregister and frees the MSIX vectors. This slight error leads to over accouting of the stats contexts needed after the RDMA driver has unloaded. This will cause some firmware warning and error messages in dmesg during subsequent config. changes or ifdown/ifup. Fix it by properly accouting for extra stats contexts only if the RDMA driver is registered and MSIX vectors have been successfully requested. Fixes: c027c6b4e91f ("bnxt_en: get rid of num_stat_ctxs variable") Reviewed-by: Yongping Zhang <yongping.zhang@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8153_ecm: Add Lenovo Powered USB-C Hub as a fallback of r8152Leon Schuermann
This commit enables the use of the r8153_ecm driver, introduced with commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip. This results in the following driver preference: - if r8152 is available, use the r8152 driver - if r8152 is not available, use the r8153_ecm driver This is done to prevent the NIC from constantly sending pause frames when the host system enters standby (fixed by using the r8152 driver in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing the device to work with the r8153_ecm driver as a fallback. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8152: Add Lenovo Powered USB-C Travel HubLeon Schuermann
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to use the cdc_ether driver. However, using this driver, with the system suspended the device constantly sends pause-frames as soon as the receive buffer fills up. This causes issues with other devices, where some Ethernet switches stop forwarding packets altogether. Using the Realtek driver (r8152) fixes this issue. Pause frames are no longer sent while the host system is suspended. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: phy: smsc: fix clk error handlingMarco Felsch
Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") added the phy clk support. The commit already checks if clk_get_optional() throw an error but instead of returning the error it ignores it. Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12dm integrity: fix the maximum number of argumentsMikulas Patocka
Advance the maximum number of arguments from 9 to 15 to account for all potential feature flags that may be supplied. Linux 4.19 added "meta_device" (356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate" (a3fcf7253139609bf9ff901fbf955fba047e75dd) flags. Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added "sectors_per_bit" and "bitmap_flush_interval". Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added "allow_discards". And the commit d537858ac8aaf4311b51240893add2fc62003b97 added "fix_padding". Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-12dm crypt: do not call bio_endio() from the dm-crypt taskletIgnat Korchagin
Sometimes, when dm-crypt executes decryption in a tasklet, we may get "BUG: KASAN: use-after-free in tasklet_action_common.constprop..." with a kasan-enabled kernel. When the decryption fully completes in the tasklet, dm-crypt will call bio_endio(), which in turn will call clone_endio() from dm.c core code. That function frees the resources associated with the bio, including per bio private structures. For dm-crypt it will free the current struct dm_crypt_io, which contains our tasklet object, causing use-after-free, when the tasklet is being dequeued by the kernel. To avoid this, do not call bio_endio() from the current tasklet context, but delay its execution to the dm-crypt IO workqueue. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-12Merge tag 'mkp-scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi Pull SCSI target fix from Martin Petersen: "This addresses an issue in the SCSI target subsystem. A connected initiator could specify IDs for any configured backing store device, not just the ones explicitly made visible to the host. The remedy is to honor the access control list when doing ID descriptor lookups" * tag 'mkp-scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: scsi: target: Fix XCOPY NAA identifier lookup
2021-01-12drm/i915: Allow the sysadmin to override security mitigationsChris Wilson
The clear-residuals mitigation is a relatively heavy hammer and under some circumstances the user may wish to forgo the context isolation in order to meet some performance requirement. Introduce a generic module parameter to allow selectively enabling/disabling different mitigations. To disable just the clear-residuals mitigation (on Ivybridge, Baytrail, or Haswell) use the module parameter: i915.mitigations=auto,!residuals Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858 Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk (cherry picked from commit f7452c7cbd5b5dfb9a6c84cb20bea04c89be50cd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-12drm/i915/gt: Restore clear-residual mitigations for Ivybridge, BaytrailChris Wilson
The mitigation is required for all gen7 platforms, now that it does not cause GPU hangs, restore it for Ivybridge and Baytrail. Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Bloomfield Jon <jon.bloomfield@intel.com> Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk (cherry picked from commit 008ead6ef8f588a8c832adfe9db201d9be5fd410) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-12drm/i915/gt: Limit VFE threads based on GTChris Wilson
MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the range [0, n-1] where n is #EU * (#threads/EU) with the number of threads based on plaform and the number of EU based on the number of slices and subslices. This is a fixed number per platform/gt, so appropriately limit the number of threads we spawn to match the device. v2: Oversaturate the system with tasks to force execution on every HW thread; if the thread idles it is returned to the pool and may be reused again before an unused thread. v3: Fix more state commands, which was causing Baytrail to barf. v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024 Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Randy Wright <rwright@hpe.com> Cc: stable@vger.kernel.org # v5.7+ Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk (cherry picked from commit eebfb32e26851662d24ea86dd381fd0f83cd4b47) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-12iommu/vt-d: Fix duplicate included linux/dma-map-ops.hTian Tao
linux/dma-map-ops.h is included more than once, Remove the one that isn't necessary. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609118774-10083-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-12iommu: arm-smmu-qcom: Add sdm630/msm8998 compatibles for qcom quirksKonrad Dybcio
SDM630 and MSM8998 are among the SoCs that use Qualcomm's implementation of SMMUv2 which has already proven to be problematic over the years. Add their compatibles to the lookup list to prevent the platforms from being shut down by the hypervisor at MMU probe. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109165622.149777-1-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2021-01-12iommu/vt-d: Fix unaligned addresses for intel_flush_svm_range_dev()Lu Baolu
The VT-d hardware will ignore those Addr bits which have been masked by the AM field in the PASID-based-IOTLB invalidation descriptor. As the result, if the starting address in the descriptor is not aligned with the address mask, some IOTLB caches might not invalidate. Hence people will see below errors. [ 1093.704661] dmar_fault: 29 callbacks suppressed [ 1093.704664] DMAR: DRHD: handling fault status reg 3 [ 1093.712738] DMAR: [DMA Read] Request device [7a:02.0] PASID 2 fault addr 7f81c968d000 [fault reason 113] SM: Present bit in first-level paging entry is clear Fix this by using aligned address for PASID-based-IOTLB invalidation. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20201231005323.2178523-2-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-12clk: tegra30: Add hda clock default rates to clock driverPeter Geis
Current implementation defaults the hda clocks to clk_m. This causes hda to run too slow to operate correctly. Fix this by defaulting to pll_p and setting the frequency to the correct rate. This matches upstream t124 and downstream t30. Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-12drm/ttm: make the pool shrinker lock a mutexChristian König
set_pages_wb() might sleep and so we can't do this in an atomic context. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/413409/
2021-01-11rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM requestAndrey Zhizhikin
MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: mvpp2: Remove Pause and Asym_Pause supportStefan Chulski
Packet Processor hardware not connected to MAC flow control unit and cannot support TX flow control. This patch disable flow control support. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1610306582-16641-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp
When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 03:12:12 +0000