| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems"
* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt665x: fix alignment constraints
staging: comedi: cb_pcidas64: fix request_irq() warn
staging: comedi: cb_pcidas: fix request_irq() warn
MAINTAINERS: move the staging subsystem to lists.linux.dev
MAINTAINERS: move some real subsystems off of the staging mailing list
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues"
* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb-storage: Add quirk to defeat Kindle's automatic unload
usb: gadget: configfs: Fix KASAN use-after-free
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: cdnsp: Fixes incorrect value in ISOC TRB
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- another missing RT_PROP table related fix, to ensure that the
efivarfs pseudo filesystem fails gracefully if variable services
are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
efivars: respect EFI_UNSUPPORTED return from firmware
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a possible stack corruption and subsequent DLPAR failure in the
rpadlpar_io PCI hotplug driver
- Two build fixes for uncommon configurations
Thanks to Christophe Leroy and Tyrel Datwyler.
* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
PCI: rpadlpar: Fix potential drc_name corruption in store functions
powerpc: Force inlining of cpu_has_feature() to avoid build failure
powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight fixes, all in drivers, all fairly minor either being fixes in
error legs, memory leaks on teardown, context errors or semantic
problems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Do not use GFP_KERNEL in atomic context
scsi: ufs: ufs-mediatek: Correct operator & -> &&
scsi: sd_zbc: Update write pointer offset cache
scsi: lpfc: Fix some error codes in debugfs
scsi: qla2xxx: Fix broken #endif placement
scsi: st: Fix a use after free in st_open()
scsi: myrs: Fix a double free in myrs_cleanup()
scsi: ibmvfc: Free channel_setup_buf during device tear down
|
|
Pull block fixes from Jens Axboe:
"Just an NVMe pull request this week:
- fix tag allocation for keep alive
- fix a unit mismatch for the Write Zeroes limits
- various TCP transport fixes (Sagi Grimberg, Elad Grupi)
- fix iosqes and iocqes validation for discovery controllers (Sagi Grimberg)"
* tag 'block-5.12-2021-03-19' of git://git.kernel.dk/linux-block:
nvmet-tcp: fix kmap leak when data digest in use
nvmet: don't check iosqes,iocqes for discovery controllers
nvme-rdma: fix possible hang when failing to set io queues
nvme-tcp: fix possible hang when failing to set io queues
nvme-tcp: fix misuse of __smp_processor_id with preemption enabled
nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU
nvme: fix Write Zeroes limitations
nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAIT
nvme: merge nvme_keep_alive into nvme_keep_alive_work
nvme-fabrics: only reserve a single tag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO subsystem. Both address issues in the core GPIO
code:
- fix the return value in error path in gpiolib_dev_init()
- fix the 'gpio-line-names' property handling correctly this time"
* tag 'gpio-fixes-for-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Assign fwnode to parent's if no primary one provided
gpiolib: Fix error return code in gpiolib_dev_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- disable preemption when accessing local per-cpu variables in the new
counter set driver
- fix by a factor of four increased steal time due to missing
cputime_to_nsecs() conversion
- fix PCI device structure leak
* tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix leak of PCI device structure
s390/vtime: fix increased steal time accounting
s390/cpumf: disable preemption when accessing per-cpu variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Revert two problematic commits.
Specifics:
- Revert ACPI PM commit that attempted to improve reboot handling on
some systems, but it caused other systems to panic() during reboot
(Josef Bacik)
- Revert PM-runtime commit that attempted to improve the handling of
suppliers during PM-runtime suspend of a consumer device, but it
introduced a race condition potentially leading to unexpected
behavior (Rafael Wysocki)"
* tag 'pm-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM: runtime: Update device status before letting suppliers suspend"
Revert "PM: ACPI: reboot: Use S5 for reboot"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Three AMD IOMMU patches to fix a boot crash on AMD Stoney systems and
every other AMD IOMMU system booted with 'amd_iommu=off'.
This is a v5.11 regression.
- A Fix for the Tegra IOMMU driver to make sure it detects all IOMMUs
* tag 'iommu-fixes-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandles
iommu/amd: Keep track of amd_iommu_irq_remap state
iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabled
iommu/amd: Move Stoney Ridge check to detect_ivrs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
small fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are the usual HD-audio quirks"
* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
ALSA: usb-audio: Fix unintentional sign extension issue
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
ASoC: rt711: add snd_soc_component remove callback
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: simple-card-utils: Do not handle device clock
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda: generic: Fix the micmute led init state
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
spi: cadence: set cqspi to the driver_data field of struct device
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: remove remnants of sirf prima/atlas audio codec
...
|
|
Revert commit 44cc89f76464 ("PM: runtime: Update device status
before letting suppliers suspend") that introduced a race condition
into __rpm_callback() which allowed a concurrent rpm_resume() to
run and resume the device prematurely after its status had been
changed to RPM_SUSPENDED by __rpm_callback().
Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend")
Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.
Fixes: 18df7577adae6 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, pretty small set of fixes, a couple of i915 and
amdgpu, one ttm, one nouveau and one omap. Probably smaller than usual
for this time, so we'll see if something pops up next week or if this
will continue to stay small.
Summary:
ttm:
- Make ttm_bo_unpin() not wraparound on too many unpins
omap:
- Fix coccicheck warning in omap
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
i915:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
nouveau:
- workaround oops with bo syncing"
* tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm:
nouveau: Skip unvailable ttm page entries
drm/amd/display: Remove MPC gamut remap logic for DCN30
drm/amd/display: Correct algorithm for reversed gamma
drm/omap: dsi: fix unsigned expression compared with zero
i915/perf: Start hrtimer only if sampling the OA buffer
drm/i915: Workaround async flip + VT-d corruption on HSW/BDW
drm/amd/display: Copy over soc values before bounding box creation
drm/ttm: make ttm_bo_unpin more defensive
|
|
Starting with commit f295c8cfec833c2707ff1512da10d65386dde7af
("drm/nouveau: fix dma syncing warning with debugging on.")
the following oops occures:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 1013 Comm: Xorg.bin Tainted: G E 5.11.0-desktop-rc0+ #2
Hardware name: Acer Aspire VN7-593G/Pluto_KLS, BIOS V1.11 08/01/2018
RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
Call Trace:
nouveau_bo_validate+0x5d/0x80 [nouveau]
nouveau_gem_ioctl_pushbuf+0x662/0x1120 [nouveau]
? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
drm_ioctl_kernel+0xa6/0xf0 [drm]
drm_ioctl+0x1f4/0x3a0 [drm]
? nouveau_gem_ioctl_new+0xf0/0xf0 [nouveau]
nouveau_drm_ioctl+0x50/0xa0 [nouveau]
__x64_sys_ioctl+0x7e/0xb0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace ccfb1e7f4064374f ]---
RIP: 0010:nouveau_bo_sync_for_device+0x40/0xb0 [nouveau]
The underlying problem is not introduced by the commit, yet it uncovered the
underlying issue. The cited commit relies on valid pages. This is not given for
due to some bugs. For now, just warn and work around the issue by just ignoring
the bad ttm objects.
Below is some debug info gathered while debugging this issue:
nouveau 0000:01:00.0: DRM: ttm_dma->num_pages: 2048
nouveau 0000:01:00.0: DRM: ttm_dma->pages is NULL
nouveau 0000:01:00.0: DRM: ttm_dma: 00000000e96058e7
nouveau 0000:01:00.0: DRM: ttm_dma->page_flags:
nouveau 0000:01:00.0: DRM: ttm_dma: Populated: 1
nouveau 0000:01:00.0: DRM: ttm_dma: No Retry: 0
nouveau 0000:01:00.0: DRM: ttm_dma: SG: 256
nouveau 0000:01:00.0: DRM: ttm_dma: Zero Alloc: 0
nouveau 0000:01:00.0: DRM: ttm_dma: Swapped: 0
Signed-off-by: Tobias Klausmann <tobias.klausmann@freenet.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210313222159.3346-1-tobias.klausmann@freenet.de
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.12-rc4:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87blbg8y5t.fsf@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318042858.3810-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc4:
- Make ttm_bo_unpin() not wraparound on too many unpins.
- Fix coccicheck warning in omap.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0e13bbb-6ba6-ff24-4db8-0e02e605de18@linux.intel.com
|
|
Pull VFIO fixes from Alex Williamson:
- Fix 32-bit issue with new unmap-all flag (Steve Sistare)
- Various Kconfig changes for better coverage (Jason Gunthorpe)
- Fix to batch pinning support (Daniel Jordan)
* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
vfio: Depend on MMU
ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
vfio: IOMMU_API should be selected
vfio/type1: fix unmap all on ILP32
|
|
Pull virtio fixes from Michael Tsirkin:
"Some fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
vhost-vdpa: fix use-after-free of v->config_ctx
vhost: Fix vhost_vq_reset()
vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
vdpa_sim: Skip typecasting from void*
virtio: remove export for virtio_config_{enable, disable}
virtio-mmio: Use to_virtio_mmio_device() to simply code
vdpa: set the virtqueue num during register
|
|
The tegra_smmu_probe_device() handles only the first IOMMU device-tree
phandle, skipping the rest. Devices like 3D module on Tegra30 have
multiple IOMMU phandles, one for each h/w block, and thus, only one
IOMMU phandle is added to fwspec for the 3D module, breaking GPU.
Previously this problem was masked by tegra_smmu_attach_dev() which
didn't use the fwspec, but parsed the DT by itself. The previous commit
to tegra-smmu driver partially reverted changes that caused problems for
T124 and now we have tegra_smmu_attach_dev() that uses the fwspec and
the old-buggy variant of tegra_smmu_probe_device() which skips secondary
IOMMUs.
Make tegra_smmu_probe_device() not to skip the secondary IOMMUs. This
fixes a partially attached IOMMU of the 3D module on Tegra30 and now GPU
works properly once again.
Fixes: 765a9d1d02b2 ("iommu/tegra-smmu: Fix mc errors on tegra124-nyan")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210312155439.18477-1-digetx@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The amd_iommu_irq_remap variable is set to true in amd_iommu_prepare().
But if initialization fails it is not set to false. Fix that and
correctly keep track of whether irq remapping is enabled or not.
References: https://bugzilla.kernel.org/show_bug.cgi?id=212133
References: https://bugzilla.suse.com/show_bug.cgi?id=1183132
Fixes: b34f10c2dc59 ("iommu/amd: Stop irq_remapping_select() matching when remapping is disabled")
Cc: stable@vger.kernel.org # v5.11
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210317091037.31374-4-joro@8bytes.org
Acked-by: Huang Rui <ray.huang@amd.com>
|
|
Don't even try to initialize the AMD IOMMU hardware when amd_iommu=off has been
passed on the kernel command line.
References: https://bugzilla.kernel.org/show_bug.cgi?id=212133
References: https://bugzilla.suse.com/show_bug.cgi?id=1183132
Cc: stable@vger.kernel.org # v5.11
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210317091037.31374-3-joro@8bytes.org
Acked-by: Huang Rui <ray.huang@amd.com>
|
|
The AMD IOMMU will not be enabled on AMD Stoney Ridge systems. Bail
out even earlier and refuse to even detect the IOMMU there.
References: https://bugzilla.kernel.org/show_bug.cgi?id=212133
References: https://bugzilla.suse.com/show_bug.cgi?id=1183132
Cc: stable@vger.kernel.org # v5.11
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210317091037.31374-2-joro@8bytes.org
Acked-by: Huang Rui <ray.huang@amd.com>
|
|
Removing 2 instances of alignment warnings
drivers/staging/vt6655/rxtx.h:153:1: warning: alignment 1 of ‘struct vnt_cts’ is less than 2 [-Wpacked-not-aligned]
drivers/staging/vt6655/rxtx.h:163:1: warning: alignment 1 of ‘struct vnt_cts_fb’ is less than 2 [-Wpacked-not-aligned]
The root cause seems to be that _because_ struct ieee80211_cts is marked as __aligned(2),
this requires any encapsulating struct to also have an alignment of 2.
Fixes: 2faf12c57efe ("staging: vt665x: fix alignment constraints")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Link: https://lore.kernel.org/r/20210316181736.2553318-1-eantoranz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When port partner responds "Not supported" to the DiscIdentity command,
VDM state machine can remain in NVDM_STATE_ERR_TMOUT and this causes
querying sink cap to be skipped indefinitely. Hence check for
vdm_sm_running instead of checking for VDM_STATE_DONE.
Fixes: 8dc4bd073663f ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210318064805.3747831-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When data digest is enabled we should unmap pdu iovec before handling
the data digest pdu.
Signed-off-by: Elad Grupi <elad.grupi@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
From the base spec, Figure 78:
"Controller Configuration, these fields are defined as parameters to
configure an "I/O Controller (IOC)" and not to configure a "Discovery
Controller (DC).
...
If the controller does not support I/O queues, then this field shall
be read-only with a value of 0h
Just perform this check for I/O controllers.
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Reported-by: Belanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We only setup io queues for nvme controllers, and it makes absolutely no
sense to allow a controller (re)connect without any I/O queues. If we
happen to fail setting the queue count for any reason, we should not allow
this to be a successful reconnect as I/O has no chance in going through.
Instead just fail and schedule another reconnect.
Reported-by: Chao Leng <lengchao@huawei.com>
Fixes: 711023071960 ("nvme-rdma: add a NVMe over Fabrics RDMA host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We only setup io queues for nvme controllers, and it makes absolutely no
sense to allow a controller (re)connect without any I/O queues. If we
happen to fail setting the queue count for any reason, we should not
allow this to be a successful reconnect as I/O has no chance in going
through. Instead just fail and schedule another reconnect.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For our pure advisory use-case, we only rely on this call as a hint, so
fix the warning complaints of using the smp_processor_id variants with
preemption enabled.
Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context")
Fixes: ada831772188 ("nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When the controller sends us a 0-length r2t PDU we should not attempt to
try to set up a h2cdata PDU but rather conclude that this is a buggy
controller (forward progress is not possible) and simply fail it
immediately.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Belanger, Martin <Martin.Belanger@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We voluntarily limit the Write Zeroes sizes to the MDTS value provided by
the hardware, but currently get the units wrong, so fix that.
Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
|
|
To avoid an error recovery deadlock where the keep alive work is waiting
for a request and thus can't be flushed to make progress for tearing down
the controller. Also print the error code returned from
blk_mq_alloc_request to help debugging any future issues in this code.
Based on an earlier patch from Hannes Reinecke <hare@suse.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
|
|
Merge nvme_keep_alive into its only caller to prepare for additional
changes to this code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
|
|
Fabrics drivers currently reserve two tags on the admin queue. But
given that the connect command is only run on a freshly created queue
or after all commands have been force aborted we only need to reserve
a single tag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
|
|
[Why?]
Should only reroute gamut remap to mpc unless 3D LUT is not used and all
planes are using the same src->dest.
[How?]
Remove DCN30 specific logic for rerouting gamut remap to mpc.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
DCN30 needs to correctly program reversed gamma curve, which DCN20
already has.
Also needs to fix a bug that 252-255 values are clipped.
[How]
Apply two fixes into DCN30.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Calvin Hou <Calvin.Hou@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Acked-by: Vladimir Stempen <Vladimir.Stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
In the situations where the DWC3 gadget stops active transfers, once
calling the dwc3_gadget_giveback(), there is a chance where a function
driver can queue a new USB request in between the time where the dwc3
lock has been released and re-aquired. This occurs after we've already
issued an ENDXFER command. When the stop active transfers continues
to remove USB requests from all dep lists, the newly added request will
also be removed, while controller still has an active TRB for it.
This can lead to the controller accessing an unmapped memory address.
Fix this by ensuring parameters to prevent EP queuing are set before
calling the stop active transfers API.
Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1615507142-23097-1-git-send-email-wcheng@codeaurora.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcpm-source-psy- does not invoke power_supply_changed API when
one of the published power supply properties is changed.
power_supply_changed needs to be called to notify
userspace clients(uevents) and kernel clients.
Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210317181249.1062995-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the unused "u32 vdo[3]" part in the tps6598x_rx_identity_reg
struct. This helps avoid "failed to register partner" errors which
happen when tps6598x_read_partner_identity() fails because the
amount of data read is 12 bytes smaller than the struct size.
Note that vdo[3] is already in usb_pd_identity and hence
shouldn't be added to tps6598x_rx_identity_reg as well.
Fixes: f6c56ca91b92 ("usb: typec: Add the Product Type VDOs to struct usb_pd_identity")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Elias Rudberg <mail@eliasrudberg.se>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311124710.6563-1-mail@eliasrudberg.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE. It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command. The reason for this
behavior isn't clear, although it's not hard to make some guesses.
At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).
To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set. This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.
Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices. However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval. Changing the driver's
behavior is safer and has minimal overhead.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When gadget is disconnected, running sequence is like this.
. composite_disconnect
. Call trace:
usb_string_copy+0xd0/0x128
gadget_config_name_configuration_store+0x4
gadget_config_name_attr_store+0x40/0x50
configfs_write_file+0x198/0x1f4
vfs_write+0x100/0x220
SyS_write+0x58/0xa8
. configfs_composite_unbind
. configfs_composite_bind
In configfs_composite_bind, it has
"cn->strings.s = cn->configuration;"
When usb_string_copy is invoked. it would
allocate memory, copy input string, release previous pointed memory space,
and use new allocated memory.
When gadget is connected, host sends down request to get information.
Call trace:
usb_gadget_get_string+0xec/0x168
lookup_string+0x64/0x98
composite_setup+0xa34/0x1ee8
If gadget is disconnected and connected quickly, in the failed case,
cn->configuration memory has been released by usb_string_copy kfree but
configfs_composite_bind hasn't been run in time to assign new allocated
"cn->configuration" pointer to "cn->strings.s".
When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling
memory is accessed, "BUG: KASAN: use-after-free" error occurs.
Cc: stable@vger.kernel.org
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently udc->ud.tcp_rx is being assigned twice, the second assignment
is incorrect, it should be to udc->ud.tcp_tx instead of rx. Fix this.
Fixes: 46613c9dfa96 ("usbip: fix vudc usbip_sockfd_store races leading to gpf")
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210311104445.7811-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal framework fix from Daniel Lezcano:
"Fix NULL pointer access when the cooling device transition stats
table failed to allocate due to a big number of states (Manaf
Meethalavalappu Pallikunhi)"
* tag 'thermal-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/core: Add NULL pointer check before using cooling device stats
|
|
r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero.
so r < 0 condition is never accessible.
Fixes coccicheck warnings:
./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6:
WARNING: Unsigned expression compared with zero: r < 0
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com
|
|
SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.
Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.
With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.
This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.
Start the timer only if SAMPLE_OA is specified.
v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit be0bdd67fda9468156c733976688f6487d0c42f7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
On HSW/BDW with VT-d active the first tile row scanned out
after the first async flip of the frame often ends up corrupted.
Whether the corruption happens or not depends on the scanline
on which the async flip happens, but the behaviour seems very
consistent. Ie. the same set of scanlines (which are most scanlines)
always show the corruption. And another set of scanlines (far less
of them) never shows the corruption.
I discovered that disabling the fetch-stride stretching
feature cures the corruption. This is some kind of TLB related
prefetch thing AFAIK. We already disable it on SNB primary
planes due to a documented workaround. The hardware folks
indicated that disabling this should be fine, so let's go
with that.
And while we're here, let's document the relevant bits on all
pre-skl platforms.
Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
(cherry picked from commit b7a7053ab2ec558b8ae4e55f62ea8f1f58e14f5c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
