summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-10iwlwifi: fix iwl_sta_init_lq station IDJohannes Berg
The "is_ap" argument to iwl_sta_init_lq is never true, so it and the corresponding code can be removed. However, it needs to have the station ID because it is also used for the IBSS BSSID station, and that doesn't have the broadcast ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: note that priv->bssid is used only by 3945Johannes Berg
The bssid member of struct iwl_priv is now only used by 3945 code, so note that. It shouldn't be used by any other code in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use vif in iwl_ht_confJohannes Berg
Pass the virtual interface pointer to iwl_ht_conf() so it doesn't need to rely on iw_mode and other global variables. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove useless priv->vif checkJohannes Berg
This check is not useful, since we now no longer dereference priv->vif at this spot. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: use virtual interface in TX aggregation handlingJohannes Berg
Most of the TX aggregation handling can be passed the virtual interface directly instead of having to rely on priv->vif. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: push virtual interface throughJohannes Berg
Rather than keeping every bit of information around in priv and the virtual interface, add a virtual interface to many functions and use the information directly from it. This removes beacon_int, assoc_capability and assoc_id from struct iwl_priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: apply filter flags directlyJohannes Berg
Since iwl_configure_filter can now sleep since the mac80211 callback was changed, we can now apply filter flags changes directly. Also, while at it, make the code a bit more generic with a local macro. There's no need to check changed_flags since we apply all at the same time anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: use vif->type to check stationJohannes Berg
We need not check iw_mode, since we have the vif pointer available. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: move iwl_get_ra_sta_id to 4965Johannes Berg
This function is only needed by 4965, so it need not be in core code and can be made static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove rts_thresholdJohannes Berg
We never use that member of struct iwl_priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwl3945: add plcp error checkingAbhijeet Kolekar
Add plcp error checking for 3945. After threshold of plcp is reached , it resets the radio Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: implement loading a new firmware file typeJohannes Berg
The old firmware file type does not allow indicating any firmware capabilities, which we frequently want to make things easier. This implements a new firmware type that is based on a TLV structure, and adds a TLV for the maximum length of probe requests in scans. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: prepare for new firmware file formatJohannes Berg
Currently the first four bytes in a firmware file indicate the major, minor and api versions as well as the serial number. These combined can never be zero, so we can use that special case for a new, future, file format. This patch simply shuffles the code and prepares for that new format. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: move eeprom version printout to eeprom initJohannes Berg
It doesn't belong into firmware loading, it should instead be printed after loading the EEPROM. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove ucode virtual functionsJohannes Berg
AGN devices all use the same ucode operations, except for 4965, because 4965 uses only v1 file headers. Therefore, we can remove all the indirection we have here and just code the API distinction in place, with a small special case for 4965. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwl3945: remove ucode access indirectionJohannes Berg
As these function pointers will always point to the 3945 functions, we can just call them directly and avoid the indirection. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: show and store firmware build numberJohannes Berg
We currently display the build number only if debugging is enabled, but it is really helpful so show it all the time. Also store it so it can be retrieved later via ethtool. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: manage IBSS station properlyJohannes Berg
Currently iwlwifi will eventually exhaust the station table when adding the BSSID station for IBSS mode, unless the interface is set down. The new mac80211 ibss joined/left notification allows us to fix that easily by moving the code to add the IBSS station to the notification, and also adding code to remove it again when we leave the IBSS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: pass address to iwl_remove_stationJohannes Berg
We'll need that function for IBSS station management, so pass it the address, which is the only thing it uses from the station struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwl3945: use iwl3945_add_bcast_stationJohannes Berg
iwl3945 should not use iwl_add_local_station(..., false) because that would leave the IWL_STA_UCODE_INPROGRESS flag set for the station, which is not desirable. Instead it can use iwl3945_add_bcast_station() here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: make bcast LQ command available for later restore actionsReinette Chatre
When adding the broadcast station the link quality command is generated on demand, sent to device, and disappears. It is thus not available for later cases when we need to restore stations and need to send the link quality command afterwards. Now, when first adding the broadcast station, also generate its link quality command to always be available for later restoring. Also fix an issue when adding local stations where the "in progress" state is never cleared. Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: dump firmware build info in error caseShanyu Zhao
Dump the firmware version and build number in case of firmware SW error. This would help firmware engineer analyze the error log. Requested-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: checking for all the possible failure casesWey-Yi Guy
Multiple error condition require fw/rf reset, driver should check all the possible errors as long as the error checking functions for the devices are available. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: wimax co-exist code clean upWey-Yi Guy
wifi/wimax co-exist command is part of _agn device configuration sequence; move it to iwl-agn-ucode.c which is more appropriate place for the function. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: give correct return information for tx power debugfsWey-Yi Guy
Return -EAGAIN when request tx power information and uCode is not ready; so it will not confuse with tx power information not available. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use cfg to configure calibration operationWey-Yi Guy
sensitivity calibration and chain noise calibration are not available for all the devices; use .cfg to configure the availability of those calibration functions Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use .cfg to enable/disable continuous ucode traceWey-Yi Guy
Instead of checking device type for enable/disable continuous ucode trace function; put it in .cfg for better control and more flexibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove device type checking for tx power in debugfsWey-Yi Guy
Instead of checking device type for enable/disable tx power control, move it to .cfg for better control and more flexibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: use vif iwl_bss_info_changedJohannes Berg
The iw_mode will always follow the only vif we have, but using the vif directly seems easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: rename "tx_power" to "chain_tx_power"Wey-Yi Guy
The "chain_tx_power" debugfs function is to display the tx power per chain based. Name it "tx_power" is misleading. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: remove powersave debugfs if it is not supportedWey-Yi Guy
For the devices do not have power save support, remove the power save control related debugfs files. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwl3945: fix scan racesAbhijeet Kolekar
Port following patch to 3945. "commit 90c4162ff59a3281b6d2f7206740be6217bd6758 Author: Johannes Berg <johannes.berg@intel.com> Date: Wed Apr 7 00:21:36 2010 -0700 iwlwifi: fix scan races" Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: rename 6000 series Gen2 devices to Gen2aShanyu Zhao
Rename the current 6000 series Gen2 devices to Gen2a. Rename the ucode name prefix to iwlwifi-6000g2a. Also corrected the device IDs for Gen2a series devices. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10Merge branch 'wireless-2.6' into wireless-next-2.6Reinette Chatre
Conflicts: drivers/net/wireless/iwlwifi/iwl-dev.h
2010-05-10iwlagn: wait for asynchronous firmware loadingJohannes Berg
When we kick off a firmware loading process, and then unbind from the pci device right away, we get into trouble. Avoid that by waiting for the firmware loading to finish (whether successfully or not) before the unbind in iwl_pci_remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10wireless: depends on NETRandy Dunlap
When CONFIG_NET is disabled, the attempt to build wext-priv.c fails with: net/wireless/wext-priv.c: In function 'ioctl_private_call': net/wireless/wext-priv.c:207: error: implicit declaration of function 'call_commit_handler' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10wireless: rt2x00: rt2800usb: replace X by xXose Vazquez Perez
s/X/x Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up generic procedures on descriptor writing.Gertjan van Wingerde
With a little bit of restructuring it isn't necessary to have special cases in rt2x00queue_write_tx_descriptor for writing the descriptor for beacons. Simply split off the kicking of the TX queue to a separate function with is only called for non-beacons. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Fix beaconing on rt2800.Gertjan van Wingerde
According to the Ralink vendor driver for rt2800 we don't need a full TXD for a beacon but just a TXWI in front of the actual beacon. Fix the rt2800pci and rt2800usb beaconing code accordingly. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: provide beacon's txdesc to write_beacon callback function.Gertjan van Wingerde
Preparation to fix rt2800 beaconing. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up all driver's kick_tx_queue callback functions.Gertjan van Wingerde
All of the driver's kick_tx_queue callback functions treat the TX queue for beacons in a special manner. Clean this up by integrating the kicking of the beacon queue into the write_beacon callback function, and let the generic code no longer call the kick_tx_queue callback function when updating the beacon. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Factor out RXWI processing to common rt2800 code.Gertjan van Wingerde
RXWI processing is exactly the same for rt2800pci and rt2800usb, so make it common code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Factor out TXWI writing to common rt2800 code.Gertjan van Wingerde
TXWI writing is exactly the same for rt2800pci and rt2800usb, so make it common code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Don't check whether hardware crypto is enabled when reading RXD.Gertjan van Wingerde
We should simply follow what the hardware told us it has done. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up rt2800usb.h.Gertjan van Wingerde
Remove unused RXD_DESC_SIZE define and remove duplicated RXWI definitions from rt2800.h. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Fix setting of txdesc->length field.Gertjan van Wingerde
We should take the stripping of the IV into account for the txdesc->length field. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath5k: several off by one range checksDan Carpenter
There are several places that use > ARRAY_SIZE() instead of >= ARRAY_SIZE(). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k/htc_drv_main: off by one errorDan Carpenter
I changed "> ATH9K_HTC_MAX_TID" to ">= ATH9K_HTC_MAX_TID" to avoid a potential overflow. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10ath9k/htc_drv_main: null dereference typoDan Carpenter
This is a stray null dereference. We initialize "ista" properly later on. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10iwlwifi: remove stray mutex_unlock()Dan Carpenter
This mutex_unlock() has been here from the initial commit, but as nearly as I can tell, there isn't a reason for it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 07:19:22 +0000