summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-05-15usb: mtu3: fix an unrecognized issue when connected with PCChunfeng Yun
When boot on the platform with the USB cable connected to Win7, the Win7 will pop up an error dialog: "USB Device not recognized", but finally the Win7 can enumerate it successfully. The root cause is as the following: When the xHCI driver set PORT_POWER of the OTG port, and if both IDPIN and VBUS_VALID are high at the same time, the MTU3 controller will set SESSION and pull up DP, so the Win7 can detect existence of USB device, but if the mtu3 driver can't switch to device mode during the debounce time, the Win7 can not enumerate it. Here to fix it by removing the 1s delayed EXTCON register to speed up mode switch. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: remove repeated setting of gadget stateChunfeng Yun
The usb_add_gadget_udc() will set the gadget state as USB_STATE_NOTATTACHED, so we needn't set it again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: avoid TX data length truncated in SS/SSP modeChunfeng Yun
The variable of 'count' is declared as u8, this will cause an issue due to value truncated when works in SS or SSP mode and data length is greater than 255, so change it as u32. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: phy: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: phy: Add Kconfig entry for Tegra PHY driverDmitry Osipenko
Tegra's EHCI driver has a build dependency on Tegra's PHY driver and currently Tegra's PHY driver is built only when Tegra's EHCI driver is built. Add own Kconfig entry for the Tegra's PHY driver so that drivers other than ehci-tegra (like ChipIdea UDC) could work with ehci-tegra driver being disabled in kernels config by allowing user to manually select the PHY driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: tegra: Move utmi-pads reset from ehci-tegra to tegra-phyDmitry Osipenko
UTMI pads are shared by USB controllers and reset of UTMI pads is shared with the reset of USB1 controller. Currently reset of UTMI pads is done by the EHCI driver and ChipIdea UDC works because EHCI driver always happen to be probed first. Move reset controls from ehci-tegra to tegra-phy in order to resolve the problem. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: phy: tegra: Cleanup error messagesDmitry Osipenko
Tegra's PHY driver has a mix of pr_err() and dev_err(), let's switch to dev_err() and use common errors message formatting across the driver for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: gadget: f_fs: Add compat_ioctl to epfilesJerry Zhang
This allows 32 bit owners of ffs endpoints to make ioctls into a 64 bit kernel. All of the current epfile ioctls can be handled with the same struct definitions as regular ioctl. Acked-by: Michał Nazarewicz <mina86@mina86.com> Signed-off-by: Jerry Zhang <zhangjerry@google.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: gadget: f_midi: Use refcount when freeing f_midi_optsJerry Zhang
Currently, the midi function is not freed until it is both removed from the config and released by the user. Since the user could take a long time to release the card, it's possible that the function could be unlinked and thus f_midi_opts would be null when freeing f_midi. Thus, refcount f_midi_opts and only free it when it is unlinked and all f_midis have been freed. Signed-off-by: Jerry Zhang <zhangjerry@google.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb/gadget: Add driver for Aspeed SoC virtual hubBenjamin Herrenschmidt
The Aspeed BMC SoCs support a "virtual hub" function. It provides some HW support for a top-level USB2 hub behind which sit 5 gadget "ports". This driver adds support for the full functionality, emulating the hub standard requests and exposing 5 UDC gadget drivers corresponding to the ports. The hub itself has HW provided dedicated EP0 and EP1 (the latter for hub interrupts). It also has dedicated EP0s for each function. For other endpoints, there's a pool of 15 "generic" endpoints that are shared among the ports. The driver relies on my previous patch adding a "dispose" EP op to handle EP allocation between ports. EPs are allocated from the shared pool in the UDC "match_ep" callback and assigned to the UDC instance (added to the gadget ep_list). When the composite driver gets unbound, the new hook will allow the UDC to clean things up and return those EPs to the shared pool. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb/gadget: Constify usb_gadget_get_string "table" argumentBenjamin Herrenschmidt
The table is never modified by the function. This allows us to use it on a statically defined table that is marked const. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-04-23usb: gadget: udc: core: Document the relation between usb_ep_queue() and ↵Alan Stern
completion callback Improve the kerneldoc for usb_ep_queue() to note explicitly that the request's completion routine will be called if and only if the return value is 0. The corresponding fact about usb_submit_urb() for the host-side API has long been documented, and this has always been the intention for the gadget API. But until now, documentation seems to have been lacking. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-04-22Merge tag 'drm-fixes-for-v4.17-rc2' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Exynos, i915, vc4, amdgpu fixes. i915: - an oops fix - two race fixes - some gvt fixes amdgpu: - dark screen fix - clk/voltage fix - vega12 smu fix vc4: - memory leak fix exynos just drops some code" * tag 'drm-fixes-for-v4.17-rc2' of git://people.freedesktop.org/~airlied/linux: (23 commits) drm/amd/powerplay: header file interface to SMU update drm/amd/pp: Fix bug voltage can't be OD separately on VI drm/amd/display: Don't program bypass on linear regamma LUT drm/i915: Fix LSPCON TMDS output buffer enabling from low-power state drm/i915/audio: Fix audio detection issue on GLK drm/i915: Call i915_perf_fini() on init_hw error unwind drm/i915/bios: filter out invalid DDC pins from VBT child devices drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6 drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value drm/exynos: exynos_drm_fb -> drm_framebuffer drm/exynos: Move dma_addr out of exynos_drm_fb drm/exynos: Move GEM BOs to drm_framebuffer drm: Fix HDCP downstream dev count read drm/vc4: Fix memory leak during BO teardown drm/i915/execlists: Clear user-active flag on preemption completion drm/i915/gvt: Add drm_format_mod update drm/i915/gvt: Disable primary/sprite/cursor plane at virtual display initialization drm/i915/gvt: Delete redundant error message in fb_decode.c drm/i915/gvt: Cancel dma map when resetting ggtt entries drm/i915/gvt: Missed to cancel dma map for ggtt entries ...
2018-04-23Merge branch 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next - Fix a dark screen issue in DC - Fix clk/voltage dependency tracking for wattman - Update SMU interface for vega12 * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: header file interface to SMU update drm/amd/pp: Fix bug voltage can't be OD separately on VI drm/amd/display: Don't program bypass on linear regamma LUT
2018-04-23Merge tag 'exynos-drm-fixes-for-v4.17-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Remove Exynos specific framebuffer structure and relevant functions. - it removes exynos_drm_fb structure which is a wrapper of drm_framebuffer and unnecessary two exynos specific callback functions, exynos_drm_destory() and exynos_drm_fb_create_handle() because we can reuse existing drm common callback ones instead. * tag 'exynos-drm-fixes-for-v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: exynos_drm_fb -> drm_framebuffer drm/exynos: Move dma_addr out of exynos_drm_fb drm/exynos: Move GEM BOs to drm_framebuffer drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled
2018-04-23Merge tag 'drm-intel-next-fixes-2018-04-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix for FDO #105549: Avoid OOPS on bad VBT (Jani) - Fix rare pre-emption race (Chris) - Fix RC6 race against PM transitions (Tvrtko) * tag 'drm-intel-next-fixes-2018-04-19' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/audio: Fix audio detection issue on GLK drm/i915: Call i915_perf_fini() on init_hw error unwind drm/i915/bios: filter out invalid DDC pins from VBT child devices drm/i915/pmu: Inspect runtime PM state more carefully while estimating RC6 drm/i915: Do no use kfree() to free a kmem_cache_alloc() return value drm/i915/execlists: Clear user-active flag on preemption completion drm/i915/gvt: Add drm_format_mod update drm/i915/gvt: Disable primary/sprite/cursor plane at virtual display initialization drm/i915/gvt: Delete redundant error message in fb_decode.c drm/i915/gvt: Cancel dma map when resetting ggtt entries drm/i915/gvt: Missed to cancel dma map for ggtt entries drm/i915/gvt: Make MI_USER_INTERRUPT nop in cmd parser drm/i915/gvt: Mark expected switch fall-through in handle_g2v_notification drm/i915/gvt: throw error on unhandled vfio ioctls
2018-04-22Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of timer fixes: - Evaluate the -ETIME condition correctly in the imx tpm driver - Fix the evaluation order of a condition in posix cpu timers - Use pr_cont() in the clockevents code to prevent ugly message splitting - Remove __current_kernel_time() which is now unused to prevent that new users show up. - Remove a stale forward declaration" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/imx-tpm: Correct -ETIME return condition check posix-cpu-timers: Ensure set_process_cpu_timer is always evaluated timekeeping: Remove __current_kernel_time() timers: Remove stale struct tvec_base forward declaration clockevents: Fix kernel messages split across multiple lines
2018-04-21Merge tag 'random_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random fixes from Ted Ts'o: "Fix some bugs in the /dev/random driver which causes getrandom(2) to unblock earlier than designed. Thanks to Jann Horn from Google's Project Zero for pointing this out to me" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: add new ioctl RNDRESEEDCRNG random: crng_reseed() should lock the crng instance that it is modifying random: set up the NUMA crng instances after the CRNG is fully initialized random: use a different mixing algorithm for add_device_randomness() random: fix crng_ready() test
2018-04-21Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A regression fix, new unit test infrastructure and a build fix: - Regression fix addressing support for the new NVDIMM label storage area access commands (_LSI, _LSR, and _LSW). The Intel specific version of these commands communicated the "Device Locked" status on the label-storage-information command. However, these new commands (standardized in ACPI 6.2) communicate the "Device Locked" status on the label-storage-read command, and the driver was missing the indication. Reading from locked persistent memory is similar to reading unmapped PCI memory space, returns all 1's. - Unit test infrastructure is added to regression test the "Device Locked" detection failure. - A build fix is included to allow the "of_pmem" driver to be built as a module and translate an Open Firmware described device to its local numa node" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: MAINTAINERS: Add backup maintainers for libnvdimm and DAX device-dax: allow MAP_SYNC to succeed Revert "libnvdimm, of_pmem: workaround OF_NUMA=n build error" libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid() tools/testing/nvdimm: enable labels for nfit_test.1 dimms tools/testing/nvdimm: fix missing newline in nfit_test_dimm 'handle' attribute tools/testing/nvdimm: support nfit_test_dimm attributes under nfit_test.1 tools/testing/nvdimm: allow custom error code injection libnvdimm, dimm: handle EACCES failures from label reads
2018-04-21Merge tag 'linux-watchdog-4.17-rc2' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - fall-through fixes - MAINTAINER change for hpwdt - renesas-wdt: Add support for WDIOF_CARDRESET - aspeed: set bootstatus during probe * tag 'linux-watchdog-4.17-rc2' of git://www.linux-watchdog.org/linux-watchdog: aspeed: watchdog: Set bootstatus during probe watchdog: renesas-wdt: Add support for WDIOF_CARDRESET watchdog: wafer5823wdt: Mark expected switch fall-through watchdog: w83977f_wdt: Mark expected switch fall-through watchdog: sch311x_wdt: Mark expected switch fall-through watchdog: hpwdt: change maintainer.
2018-04-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: - "fork: unconditionally clear stack on fork" is a non-bugfix which got lost during the merge window - performance concerns appear to have been adequately addressed. - and a bunch of fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/filemap.c: fix NULL pointer in page_cache_tree_insert() mm: memcg: add __GFP_NOWARN in __memcg_schedule_kmem_cache_create() fs, elf: don't complain MAP_FIXED_NOREPLACE unless -EEXIST error kexec_file: do not add extra alignment to efi memmap proc: fix /proc/loadavg regression proc: revalidate kernel thread inodes to root:root autofs: mount point create should honour passed in mode MAINTAINERS: add personal addresses for Sascha and Uwe kasan: add no_sanitize attribute for clang builds rapidio: fix rio_dma_transfer error handling mm: enable thp migration for shmem thp writeback: safer lock nesting mm, pagemap: fix swap offset value for PMD migration entry mm: fix do_pages_move status handling fork: unconditionally clear stack on fork
2018-04-20rapidio: fix rio_dma_transfer error handlingIoan Nicu
Some of the mport_dma_req structure members were initialized late inside the do_dma_request() function, just before submitting the request to the dma engine. But we have some error branches before that. In case of such an error, the code would return on the error path and trigger the calling of dma_req_free() with a req structure which is not completely initialized. This causes a NULL pointer dereference in dma_req_free(). This patch fixes these error branches by making sure that all necessary mport_dma_req structure members are initialized in rio_dma_transfer() immediately after the request structure gets allocated. Link: http://lkml.kernel.org/r/20180412150605.GA31409@nokia.com Fixes: bbd876adb8c72 ("rapidio: use a reference count for struct mport_dma_req") Signed-off-by: Ioan Nicu <ioan.nicu.ext@nokia.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Alexandre Bounine <alex.bou9@gmail.com> Cc: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Frank Kunz <frank.kunz@nokia.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-20Merge tag 'mmc-v4.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes: - sdhci-pci: Fixup tuning for AMD for eMMC HS200 mode - renesas_sdhi_internal_dmac: Avoid data corruption by limiting DMA RX" * tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs mmc: sdhci-pci: Only do AMD tuning for HS200
2018-04-20Merge tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD fixes from Shaohua Li: "Three small fixes for MD: - md-cluster fix for faulty device from Guoqing - writehint fix for writebehind IO for raid1 from Mariusz - a live lock fix for interrupted recovery from Yufen" * tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid1: copy write hint from master bio to behind bio md/raid1: exit sync request if MD_RECOVERY_INTR is set md-cluster: don't update recovery_offset for faulty device
2018-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Unbalanced refcounting in TIPC, from Jon Maloy. 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state. Once the connection is established it makes no sense to change this. From Eric Dumazet. 3) Missing attribute validation in neigh_dump_table(), also from Eric Dumazet. 4) Fix address comparisons in SCTP, from Xin Long. 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller. 6) Fix tunnel refcounting in l2tp, from Guillaume Nault. 7) Fix double list insert in team driver, from Paolo Abeni. 8) af_vsock.ko module was accidently made unremovable, from Stefan Hajnoczi. 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang. 10) Don't assume netdevice struct is DMA'able memory in virtio_net driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) net/smc: fix shutdown in state SMC_LISTEN bnxt_en: Fix memory fault in bnxt_ethtool_init() virtio_net: sparse annotation fix virtio_net: fix adding vids on big-endian virtio_net: split out ctrl buffer net: hns: Avoid action name truncation docs: ip-sysctl.txt: fix name of some ipv6 variables vmxnet3: fix incorrect dereference when rxvlan is disabled llc: hold llc_sap before release_sock() MAINTAINERS: Direct networking documentation changes to netdev atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit" net: qmi_wwan: add Wistron Neweb D19Q1 net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN" net: stmmac: Disable ACS Feature for GMAC >= 4 net: mvpp2: Fix DMA address mask size net: change the comment of dev_mc_init net: qualcomm: rmnet: Fix warning seen with fill_info tun: fix vlan packet truncation tipc: fix infinite loop when dumping link monitor summary tipc: fix use-after-free in tipc_nametbl_stop ...
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - suspend/resume handling fix for Raydium I2C-connected touchscreen from Aaron Ma - protocol fixup for certain BT-connected Wacoms from Aaron Armstrong Skomra - battery level reporting fix on BT-connected mice from Dmitry Torokhov - hidraw race condition fix from Rodrigo Rivas Costa * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix inverted return value from i2c_hid_command() HID: i2c-hid: Fix resume issue on Raydium touchscreen device HID: wacom: bluetooth: send exit report for recent Bluetooth devices HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device HID: input: fix battery level reporting on BT mice
2018-04-20Merge tag 'for-linus-4.17-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - some fixes of kmalloc() flags - one fix of the xenbus driver - an update of the pv sound driver interface needed for a driver which will go through the sound tree * tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus_dev_frontend: Really return response string xen/sndif: Sync up with the canonical definition in Xen xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes and kexec-file-load from Martin Schwidefsky: "After the common code kexec patches went in via Andrew we can now push the architecture parts to implement the kexec-file-load system call. Plus a few more bug fixes and cleanups, this includes an update to the default configurations" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/signal: cleanup uapi struct sigaction s390: rename default_defconfig to debug_defconfig s390: remove gcov defconfig s390: update defconfig s390: add support for IBM z14 Model ZR1 s390: remove couple of duplicate includes s390/boot: remove unused COMPILE_VERSION and ccflags-y s390/nospec: include cpu.h s390/decompressor: Ignore file vmlinux.bin.full s390/kexec_file: add generated files to .gitignore s390/Kconfig: Move kexec config options to "Processor type and features" s390/kexec_file: Add ELF loader s390/kexec_file: Add crash support to image loader s390/kexec_file: Add image loader s390/kexec_file: Add kexec_file_load system call s390/kexec_file: Add purgatory s390/kexec_file: Prepare setup.h for kexec_file_load s390/smsgiucv: disable SMSG on module unload s390/sclp: avoid potential usage of uninitialized value
2018-04-19device-dax: allow MAP_SYNC to succeedDave Jiang
MAP_SYNC is a nop for device-dax. Allow MAP_SYNC to succeed on device-dax to eliminate special casing between device-dax and fs-dax as to when the flag can be specified. Device-dax users already implicitly assume that they do not need to call fsync(), and this enables them to explicitly check for this capability. Cc: <stable@vger.kernel.org> Fixes: b6fb293f2497 ("mm: Define MAP_SYNC and VM_SYNC flags") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-19Revert "libnvdimm, of_pmem: workaround OF_NUMA=n build error"Dan Williams
With commit df3f126482db ("libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()") it is now possible to allow of_pmem to be built as a module as originally implemented. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-19libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()Rob Herring
Remove the direct dependency on of_node_to_nid() by using dev_to_node() instead. Any DT platform device will have its NUMA node id set when the device is created. With this, commit 291717b6fbdb ("libnvdimm, of_pmem: workaround OF_NUMA=n build error") can be reverted. Fixes: 717197608952 ("libnvdimm: Add device-tree based driver") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: linux-nvdimm@lists.01.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-19bnxt_en: Fix memory fault in bnxt_ethtool_init()Vasundhara Volam
In some firmware images, the length of BNX_DIR_TYPE_PKG_LOG nvram type could be greater than the fixed buffer length of 4096 bytes allocated by the driver. This was causing HWRM_NVM_READ to copy more data to the buffer than the allocated size, causing general protection fault. Fix the issue by allocating the exact buffer length returned by HWRM_NVM_FIND_DIR_ENTRY, instead of 4096. Move the kzalloc() call into the bnxt_get_pkgver() function. Fixes: 3ebf6f0a09a2 ("bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFO") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19virtio_net: sparse annotation fixMichael S. Tsirkin
offloads is a buffer in virtio format, should use the __virtio64 tag. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19virtio_net: fix adding vids on big-endianMichael S. Tsirkin
Programming vids (adding or removing them) still passes guest-endian values in the DMA buffer. That's wrong if guest is big-endian and when virtio 1 is enabled. Note: this is on top of a previous patch: virtio_net: split out ctrl buffer Fixes: 9465a7a6f ("virtio_net: enable v1.0 support") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19virtio_net: split out ctrl bufferMichael S. Tsirkin
When sending control commands, virtio net sets up several buffers for DMA. The buffers are all part of the net device which means it's actually allocated by kvmalloc so it's in theory (on extreme memory pressure) possible to get a vmalloc'ed buffer which on some platforms means we can't DMA there. Fix up by moving the DMA buffers into a separate structure. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: hns: Avoid action name truncationdann frazier
When longer interface names are used, the action names exposed in /proc/interrupts and /proc/irq/* maybe truncated. For example, when using the predictable name algorithm in systemd on a HiSilicon D05, I see: ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 Increase the max ring name length to allow for an interface name of IFNAMSIZE. After this change, I now see: $ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 enahisic2i0-tx2 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx10 enahisic2i0-tx11 enahisic2i0-tx12 enahisic2i0-tx13 enahisic2i0-tx14 enahisic2i0-tx15 Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19vmxnet3: fix incorrect dereference when rxvlan is disabledRonak Doshi
vmxnet3_get_hdr_len() is used to calculate the header length which in turn is used to calculate the gso_size for skb. When rxvlan offload is disabled, vlan tag is present in the header and the function references ip header from sizeof(ethhdr) and leads to incorrect pointer reference. This patch fixes this issue by taking sizeof(vlan_ethhdr) into account if vlan tag is present and correctly references the ip hdr. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Acked-by: Louis Luo <llouis@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"Colin Ian King
Trivial fix to spelling mistake in message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: qmi_wwan: add Wistron Neweb D19Q1Pawel Dembicki
This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: stmmac: Disable ACS Feature for GMAC >= 4Jose Abreu
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status is never checked in descriptor rx_status callback. This will cause stmmac to always strip packets even that ACS feature is already stripping them. Lets be safe and disable the ACS feature for GMAC >= 4 and always strip the packets for this GMAC version. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: mvpp2: Fix DMA address mask sizeMaxime Chevallier
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were used (GENMASK_ULL(40, 0)). This commit fixes that by using the correct mask. Fixes: e7c5359f2eed ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19drm/amd/powerplay: header file interface to SMU updateKenneth Feng
update vega12 smu interface. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-19drm/amd/pp: Fix bug voltage can't be OD separately on VIRex Zhu
Make sure to update the MCLK and SCLK flags when setting the VDDC flags due to dependencies. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-19drm/amd/display: Don't program bypass on linear regamma LUTHarry Wentland
Even though this is required for degamma since DCE HW only supports a couple predefined LUTs we can just program the LUT directly for regamma. This fixes dark screens which occurs when we program regamma to bypass while degamma is using srgb LUT. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-19mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCsWolfram Sang
Early revisions of certain SoCs cannot do multiple DMA RX streams in parallel. To avoid data corruption, only allow one DMA RX channel and fall back to PIO, if needed. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-19clocksource/imx-tpm: Correct -ETIME return condition checkAnson Huang
The additional brakects added to tpm_set_next_event's return value computation causes (int) forced type conversion NOT taking effect, and the incorrect value return will cause various system timer issue, like RCU stall etc.. Remove the additional brackets to make sure tpm_set_next_event always returns correct value. Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Dong Aisheng <Aisheng.dong@nxp.com> Cc: stable@vger.kernel.org Cc: daniel.lezcano@linaro.org Cc: Linux-imx@nxp.com Link: https://lkml.kernel.org/r/1524117883-2484-1-git-send-email-Anson.Huang@nxp.com
2018-04-19HID: i2c-hid: fix inverted return value from i2c_hid_command()Jiri Kosina
i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-18net: qualcomm: rmnet: Fix warning seen with fill_infoSubash Abhinov Kasiviswanathan
When the last rmnet device attached to a real device is removed, the real device is unregistered from rmnet. As a result, the real device lookup fails resulting in a warning when the fill_info handler is called as part of the rmnet device unregistration. Fix this by returning the rmnet flags as 0 when no real device is present. WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254 rtmsg_ifinfo_build_skb+0xca/0x10d Modules linked in: CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce2367 #1 Stack: 7fe655f0 60371ea3 00000000 00000000 60282bc6 6006b116 7fe65600 60371ee8 7fe65660 6003a68c 00000000 900000000 Call Trace: [<6006b116>] ? printk+0x0/0x94 [<6001f375>] show_stack+0xfe/0x158 [<60371ea3>] ? dump_stack_print_info+0xe8/0xf1 [<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d [<6006b116>] ? printk+0x0/0x94 [<60371ee8>] dump_stack+0x2a/0x2c [<6003a68c>] __warn+0x10e/0x13e [<6003a82c>] warn_slowpath_null+0x48/0x4f [<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d [<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43 [<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43 [<60282d03>] rtmsg_ifinfo+0x24/0x28 [<60264e86>] dev_close_many+0xba/0x119 [<60282cdf>] ? rtmsg_ifinfo+0x0/0x28 [<6027c225>] ? rtnl_is_locked+0x0/0x1c [<6026ca67>] rollback_registered_many+0x1ae/0x4ae [<600314be>] ? unblock_signals+0x0/0xae [<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec [<6026ceec>] unregister_netdevice_many+0x21/0xa1 [<6027c765>] rtnl_delete_link+0x3e/0x4e [<60280ecb>] rtnl_dellink+0x262/0x29c [<6027c241>] ? rtnl_get_link+0x0/0x3e [<6027f867>] rtnetlink_rcv_msg+0x235/0x274 Fixes: be81a85f5f87 ("net: qualcomm: rmnet: Implement fill_info") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A couple of follow-up patches for -rc1 changes in rbd, support for a timeout on waiting for the acquisition of exclusive lock and a fix for uninitialized memory access in CephFS, marked for stable" * tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client: rbd: notrim map option rbd: adjust queue limits for "fancy" striping rbd: avoid Wreturn-type warnings ceph: always update atime/mtime/ctime for new inode rbd: support timeout in rbd_wait_state_locked() rbd: refactor rbd_wait_state_locked()
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 10:53:01 +0000