summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-09net: hns3: delete unnecessary logs after kzalloc failsYufeng Mo
Since kernel already has logs after kzalloc fails, it's unnecessary to print duplicate logs. So this patch deletes these logs. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: synchronize some print relating to reset issueHuazhong Tan
This patch modifies some printing relating to reset issue. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: print out command code when dump fails in debugfsYufeng Mo
This patch adds a local variable to save the command code in some dump cases which need to modify the command code, then the failing command code can be print out for debugging. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: print out status register when VF receives unknown source interruptHuazhong Tan
When received an unknown vector 0 interrupt, there is not a helpful information for user to realize that now. So this patch prints out the value of the status register for this case, and uses dev_info() instead of dev_dbg() in hclge_check_event_cause(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: add a check before PF inform VF to resetYonglong Liu
When setting VF's MAC from PF, if the VF driver not loaded, the firmware will return error to PF. So PF should check whether VF is alive before sending message to VF when setting VF's MAC. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: delete some reduandant codeGuojia Liao
In hclge_add_mc_addr_common() and hclge_rm_mc_addr_common(), variable req had been set as "0" by memset(), so it's unnecessary to set .entry_type field as "0" with hnae3_set_bit() again. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: remove an unnecessary resetting check in hclge_handle_hw_ras_error()Yufeng Mo
In hclge_handle_hw_ras_error(), it is unnecessary to check HCLGE_STATE_RST_HANDLING flag, because the reset priority has been ensured by the process itself. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: rename macro HCLGE_MAX_NCL_CONFIG_LENGTHYufeng Mo
The name of macro HCLGE_MAX_NCL_CONFIG_LENGTH is inaccurate, this patch renames it to HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: hns3: fix some mixed type assignmentGuojia Liao
This patch cleans up some incorrect type in assignment reported by sparse and compiler. The warning as below: - warning : restricted __le16 degrades to integer - warning : cast from restricted __le32 - warning : cast from restricted __be32 - warning : cast from restricted __be16 and "mixed operation". Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: drop ethtool driver versionShannon Nelson
Use the default kernel version in ethtool drv_info output and drop the module version. Cc: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: add support for device id 0x1004Shannon Nelson
Add support for the management port device id. This is to capture the device and set it up for devlink use, but not set it up for network operations. We still use a netdev object in order to use the napi infrasucture for processing adminq and notifyq messages, we just don't register the netdev. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: print pci bus lane infoShannon Nelson
Print the PCI bus lane information so people can keep an eye out for poor configurations that might not support the advertised speed. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: support ethtool rxhash disableShannon Nelson
We can disable rxhashing by setting rss_types to 0. The user can toggle this with "ethtool -K <ethX> rxhash off|on", which calls into the .ndo_set_features callback with the NETIF_F_RXHASH feature bit set or cleared. This patch adds a check for that bit and updates the FW if necessary. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: clean up bitflag usageShannon Nelson
Remove the unused flags field and and fix the bitflag names to include the _F_ flag hint. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: improve irq numa localityShannon Nelson
Spreading the interrupts across the CPU cores is good for load balancing, but not necessarily as good when using a CPU/core that is not part of the NUMA local CPU. If it can be localized, the kernel's cpumask_local_spread() service will pick a core that is on the node close to the PCI device. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: remove pragma packedShannon Nelson
Replace the misguided "#pragma packed" with tags on each struct/union definition that actually needs it. This is safer and more efficient on the various compilers and architectures. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ionic: keep ionic dev on lif init failShannon Nelson
If the basic ionic interface works but the lif creation fails, don't fail the probe. This will allow us to use the driver to help inspect the hw/fw/pci interface for debugging purposes. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: dsa: mt7530: add support for port mirroringDENG Qingfang
Add support for configuring port mirroring through the cls_matchall classifier. We do a full ingress and/or egress capture towards a capture port. MT7530 supports one monitor port and multiple mirrored ports. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09r8169: remove now unneeded barrier in rtl_txHeiner Kallweit
Until ae84bc187337 ("r8169: don't use bit LastFrag in tx descriptor after send") we used to access another bit in the descriptor, therefore it seems the barrier was needed. Since this commit DescOwn is the only bit we're interested in, so the barrier isn't needed any longer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09r8169: simplify usage of rtl8169_unmap_tx_skbHeiner Kallweit
Simplify the parameters taken by rtl8169_unmap_tx_skb, this makes usage of this function easier to read and understand. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09r8169: ensure tx_skb is fully reset after calling rtl8169_unmap_tx_skbHeiner Kallweit
So far tx_skb->skb is the only member of the two structs that is not reset. Make understanding the code easier by resetting both structs completely in rtl8169_unmap_tx_skb. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09r8169: convert while to for loop in rtl_txHeiner Kallweit
Slightly improve the code by converting this while to a for loop. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net: mscc: ocelot: properly account for VLAN header length when setting MRUVladimir Oltean
What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()Eric Dumazet
Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") added a cond_resched_rcu() in a loop using rcu protection to iterate over slaves. This is breaking rcu rules, so lets instead use cond_resched() at a point we can reschedule Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09s390/qeth: remove VNICC callback parameter structJulian Wiedmann
After recent cleanups this is just a complicated wrapper around an u32*. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09s390/qdio: add tighter controls for IRQ pollingJulian Wiedmann
Once the call to qdio_establish() has completed, qdio is free to deliver data IRQs to the device driver's IRQ poll handler. For qeth (the only qdio driver that currently uses IRQ polling) this is problematic, since the IRQs can arrive before its NAPI instance is even registered. Calling napi_schedule() from qeth_qdio_start_poll() then crashes in various nasty ways. Until recently qeth checked for IFF_UP to drop such early interrupts, but that's fragile as well since it doesn't enforce any ordering. Fix this properly by bringing up the qdio device in IRQS_DISABLED mode, and have the driver explicitly opt-in to receive data IRQs. qeth does so from qeth_open(), which kick-starts a NAPI poll and then calls qdio_start_irq() from qeth_poll(). Also add a matching qdio_stop_irq() in qeth_stop() to switch the qdio dataplane back into a disabled state. Fixes: 3d35dbe6224e ("s390/qeth: don't check for IFF_UP when scheduling napi") CC: Qian Cai <cai@lca.pw> Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09macvlan: add cond_resched() during multicast processingMahesh Bandewar
The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ipvlan: add cond_resched_rcu() while processing muticast backlogMahesh Bandewar
If there are substantial number of slaves created as simulated by Syzbot, the backlog processing could take much longer and result into the issue found in the Syzbot report. INFO: rcu_sched detected stalls on CPUs/tasks: (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752) All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0 syz-executor.1 R running task on cpu 1 10984 11210 3866 0x30020008 179034491270 Call Trace: <IRQ> [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline] [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline] [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline] [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline] [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline] [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline] [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline] [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153 RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12 RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000 RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0 RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273 R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8 R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline] [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline] [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline] [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline] [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline] [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline] [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline] [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102 RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12 RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000 RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005 RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000 R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline] [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline] [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f23c69 RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0 RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1 rcu_sched R running task on cpu 1 13048 8 2 0x90000000 179099587640 Call Trace: [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393 Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”) Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09ipvlan: don't deref eth hdr before checking it's setMahesh Bandewar
IPvlan in L3 mode discards outbound multicast packets but performs the check before ensuring the ether-header is set or not. This is an error that Eric found through code browsing. Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”) Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09sfc: detach from cb_page in efx_copy_channel()Edward Cree
It's a resource, not a parameter, so we can't copy it into the new channel's TX queues, otherwise aliasing will lead to resource- management bugs if the channel is subsequently torn down without being initialised. Before the Fixes:-tagged commit there was a similar bug with tsoh_page, but I'm not sure it's worth doing another fix for such old kernels. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Suggested-by: Derek Shute <Derek.Shute@stratus.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net/mlx5e: Show/set Rx network flow classification rules on ul repVlad Buslov
Reuse infrastructure that already exists for pf in legacy mode to show/set Rx network flow classification rules for uplink representors. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-09net/mlx5e: Init ethtool steering for representorsVlad Buslov
During transition to uplink representors the code responsible for initializing ethtool steering functionality wasn't added to representor init rx routine. This causes NULL pointer dereference during configuration of network flow classification rule with ethtool (only possible to reproduce with next commit in this series which registers necessary ethtool callbacks). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-09net/mlx5e: Show/set Rx flow indir table and RSS hash key on ul repVlad Buslov
Reuse infrastructure that already exists for pf in legacy mode to show/set Rx flow hash indirection table and RSS hash key for uplink representors. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-09net/mlx5e: Introduce root ft concept for representors netdevsSaeed Mahameed
Uplink representor traffic will be redirected to an empty root ft rather than directly to a direct tir or ttc table, this root ft will be empty and will be used as a link for auto-chaining with ttc table or ethtool tables in downstream patches. On load, fs core will connect uplink rep root_ft with ttc table. In case ethtool steering will be used, fs core will auto connect root_ft with the ethtool bypass tables, which will be connected with the ttc table. vport_rx_rule[uplink_rep]->root_ft->ethtool->ttc. For non-uplink representors, for simplicity root_ft will always point at ttc table, hence the replace vport_rx rule logic is removed. vport_rx_rule[non_uplink_rep]->root_ft(ttc). For now ethtool steering support can only be available on uplink rep. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-09net/mlx5: E-switch, make query inline mode a static functionParav Pandit
mlx5_eswitch_inline_mode_get() is used only in eswitch_offloads.c. Hence, make it static and adjacent to its caller function. Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09net/mlx5: Allocate smaller size tables for ft offloadPaul Blakey
Instead of giving ft tables one of the largest tables available - 4M, give it a more reasonable size - 64k. Especially since it will always be created as a miss hook in the following patch. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09net/mlx5e: Fix an IS_ERR() vs NULL checkDan Carpenter
The esw_vport_tbl_get() function returns error pointers on error. Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09net/mlx5: Verify goto chain offload supportEli Cohen
According to PRM, forward to flow table along with either packet reformat or decap is supported only if reformat_and_fwd_to_table capability is set for the flow table. Add dependency on the capability and pack all the conditions for "goto chain" in a single function. Fix language in error message in case of not supporting forward to a lower numbered flow table. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09net/mlx5: E-Switch, Use vport metadata matching only when mandatoryMajd Dibbiny
Multi-port RoCE mode requires tagging traffic that passes through the vport. This matching can cause performance degradation, therefore disable it and use the legacy matching on vhca_id and source_port when possible. Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09net/mlx5: Tidy up and fix reverse christmas ordringMark Bloch
Use reverse chirstmas tree inside mlx5e_ethtool_get_link_ksettings. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09net/mlx5: Expose port speed when possibleMark Bloch
When port speed can't be reported based on ext_eth_proto_capability or eth_proto_capability instead of reporting speed as unknown check if the port's speed can be inferred based on the data_rate_oper field. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux This series adds some HW bits and definitions for mlx5 driver, to be used by downstream features in both rdma and netdev branches. * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: HW bit for goto chain offload support net/mlx5: Expose link speed directly net/mlx5: Introduce TLS and IPSec objects enums net/mlx5: Introduce egress acl forward-to-vport capability net/mlx5: Expose raw packet pacing APIs net/mlx5e: Replace zero-length array with flexible-array member net/mlx5: fix spelling mistake "reserverd" -> "reserved" Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-09Merge tag 'mmc-v5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - sdhci-msm: Silence warning about turning function into static - sdhci-pci-gli: Fix support for GL975x by enabling MSI interrupt * tag 'mmc-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci-gli: Enable MSI interrupt for GL975x mmc: sdhci-msm: Mark sdhci_msm_cqe_disable static
2020-03-09Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Some bug fixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: Adjust label in virtballoon_probe virtio-blk: improve virtqueue error to BLK_STS virtio-blk: fix hw_queue stopped on arbitrary error virtio_ring: Fix mem leak with vring_new_virtqueue()
2020-03-09drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20Hawking Zhang
The ROMC_INDEX/DATA offset was changed to e4/e5 since from smuio_v11 (vega20/arcturus). Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-by: Candice Li <Candice.Li@amd.com> Reviewed-by: Candice Li <Candice.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09drm/amd/display: update soc bb for nv14Martin Leung
[why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team [how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09net: sgi: ioc3-eth: Remove phy workaroundThomas Bogendoerfer
Commit a8d0f11ee50d ("MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module") fixes the root cause of not detected PHYs. Therefore the workaround can go away now. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09pinctrl: qcom: Assign irq_eoi conditionallyLinus Walleij
The hierarchical parts of MSM pinctrl/GPIO is only used when the device tree has a "wakeup-parent" as a phandle, but the .irq_eoi is anyway assigned leading to semantic problems on elder Qualcomm chipsets. When the drivers/mfd/qcom-pm8xxx.c driver calls chained_irq_exit() that call will in turn call chip->irq_eoi() which is set to irq_chip_eoi_parent() by default on a hierachical IRQ chip, and the parent is pinctrl-msm.c so that will in turn unconditionally call irq_chip_eoi_parent() again, but its parent is invalid so we get the following crash: Unnable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = (ptrval) [00000010] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (...) PC is at irq_chip_eoi_parent+0x4/0x10 LR is at pm8xxx_irq_handler+0x1b4/0x2d8 If we solve this crash by avoiding to call up to irq_chip_eoi_parent(), the machine will hang and get reset by the watchdog, because of semantic issues, probably inside irq_chip. As a solution, just assign the .irq_eoi conditionally if we are actually using a wakeup parent. Cc: David Heidelberg <david@ixit.cz> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: stable@vger.kernel.org Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Link: https://lore.kernel.org/r/20200306121221.1231296-1-linus.walleij@linaro.org Link: https://lore.kernel.org/r/20200309125207.571840-1-linus.walleij@linaro.org Link: https://lore.kernel.org/r/20200309152604.585112-1-linus.walleij@linaro.org Tested-by: David Heidelberg <david@ixit.cz> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09pinctrl: falcon: fix syntax errorMathias Kresin
Add the missing semicolon after of_node_put to get the file compiled. Fixes: f17d2f54d36d ("pinctrl: falcon: Add of_node_put() before return") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Mathias Kresin <dev@kresin.me> Link: https://lore.kernel.org/r/20200305182245.9636-1-dev@kresin.me Acked-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09pinctrl: qcom: ssbi-gpio: Fix fwspec parsing bugLinus Walleij
We are parsing SSBI gpios as fourcell fwspecs but they are twocell. Probably a simple copy-and-paste bug. Tested on the APQ8060 DragonBoard and after this ethernet and MMC card detection works again. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Brian Masney <masneyb@onstation.org> Fixes: ae436fe81053 ("pinctrl: ssbi-gpio: convert to hierarchical IRQ helpers in gpio core") Link: https://lore.kernel.org/r/20200306143416.1476250-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 13:08:35 +0000