summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-07-01drm/radeon/kms: fix bandwidth calculation when sideport is presentAlex Deucher
Fixes fdo bug 27529: https://bugs.freedesktop.org/show_bug.cgi?id=27529 Reported-by: steckdenis@yahoo.fr Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-15agp: add no warn since we have a fallback to vmalloc pathsDave Airlie
also drop the NORETRY we can probably nearly always satisfy order 1 allocs now, and again the vmalloc path is there. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-15agp: drop vmalloc flag.Dave Airlie
Since the code that was too ugly to live is upstream, we can use it now, instead of rolling our own. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-15radeon/kms: fix powerpc/rn50 untiled behaviour.Dave Airlie
Installing 2.6.34 on a Power5/rn50 combo machine, X showed buggy sw rendering, enabling tiling in the DDX fixed it. Investigation showed that a further /16 was needed in the untiled case on this chipset. Need further investigations on what other chips this could affect, possibly rv100->rv280. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-15drm/radeon: fix dual-head on rv250Dave Airlie
Plugged in FireMV with the rv250 on it, and the second crtc/dac didn't work, we were reading/writing different registers than we were modifying in the code. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wimax/i2400m: fix missing endian correction read in fw loader net8139: fix a race at the end of NAPI pktgen: Fix accuracy of inter-packet delay. pkt_sched: gen_estimator: add a new lock net: deliver skbs on inactive slaves to exact matches ipv6: fix ICMP6_MIB_OUTERRORS r8169: fix mdio_read and update mdio_write according to hw specs gianfar: Revive the driver for eTSEC devices (disable timestamping) caif: fix a couple range checks phylib: Add support for the LXT973 phy. net: Print num_rx_queues imbalance warning only when there are allocated queues
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11PCI: hotplug/cpqphp, fix NULL dereferenceJiri Slaby
There are devices out there which are PCI Hot-plug controllers with compaq PCI IDs, but are not bridges, hence have pdev->subordinate NULL. But cpqphp expects the pointer to be non-NULL. Add a check to the probe function to avoid oopses like: BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp] *pdpt = 0000000033779001 *pde = 0000000000000000 ... The device here was: 00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11) Subsystem: Compaq Computer Corporation Device [0e11:a2f8] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"Jesse Barnes
This reverts commit 75568f8094eb0333e9c2109b23cbc8b82d318a3c. Since they're just a convenience anyway, remove these symlinks since they're causing duplicate filename errors in the wild. Acked-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11PCI: change resource collision messages from KERN_ERR to KERN_INFOBjorn Helgaas
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11Merge branch 'wimax-2.6.35.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2010-06-11wimax/i2400m: fix missing endian correction read in fw loaderInaky Perez-Gonzalez
i2400m_fw_hdr_check() was accessing hardware field bcf_hdr->module_type (little endian 32) without converting to host byte sex. Reported-by: Данилин Михаил <mdanilin@nsg.net.ru> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2010-06-11Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid validate_cis failure on CIS override pcmcia: dev_node removal bugfix pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
2010-06-10net8139: fix a race at the end of NAPIFigo.zhang
fix a race at the end of NAPI complete processing, it had better do __napi_complete() first before re-enable interrupt. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10sata_sil24: Use memory barriers before issuing commandsCatalin Marinas
The data in the cmd_block buffers may reach the main memory after the writel() to the device ports. This patch introduces two calls to wmb() to ensure the relative ordering. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Colin Tuckley <colin.tuckley@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-10sata_sil24: memset() overflowDan Carpenter
cb->atapi.cdb is an array of 16 u8 elements. The call too memset() would set the first part of the sge array to zero as well. It's not a packed struct. This one has been around for five years. I found it with Smatch. I think the reason no one has seen it before is because we normally call sil24_fill_sg() and that overwrites sge with proper information? Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-09r8169: fix mdio_read and update mdio_write according to hw specsTimo Teräs
Realtek confirmed that a 20us delay is needed after mdio_read and mdio_write operations. Reduce the delay in mdio_write, and add it to mdio_read too. Also add a comment that the 20us is from hw specs. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09gianfar: Revive the driver for eTSEC devices (disable timestamping)Anton Vorontsov
Since commit cc772ab7cdcaa24d1fae332d92a1602788644f7a ("gianfar: Add hardware RX timestamping support"), the driver no longer works on at least MPC8313ERDB and MPC8568EMDS boards (and possibly much more boards as well). That's how MPC8313 Reference Manual describes RCTRL_TS_ENABLE bit: Timestamp incoming packets as padding bytes. PAL field is set to 8 if the PAL field is programmed to less than 8. Must be set to zero if TMR_CTRL[TE]=0. I see that the commit above sets this bit, but it doesn't handle TMR_CTRL. Manfred probably had this bit set by the firmware for his boards. But obviously this isn't true for all boards in the wild. Also, I recall that Freescale BSPs were explicitly disabling the timestamping because of a performance drop. For now, the best way to deal with this is just disable the timestamping, and later we can discuss proper device tree bindings and implement enabling this feature via some property. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09phylib: Add support for the LXT973 phy.Richard Cochran
This patch implements a work around for Erratum 5, "3.3 V Fiber Speed Selection." If the hardware wiring does not respect this erratum, then fiber optic mode will not work properly. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) mac80211: fix deauth before assoc iwlwifi: add missing rcu_read_lock mac80211: fix function pointer check wireless: remove my name from the maintainer list ath5k: fix NULL pointer in antenna configuration p54usb: Add device ID for Dell WLA3310 USB wl1251: fix a memory leak in probe ipmr: dont corrupt lists 8139too: fix buffer overrun in rtl8139_init_board asix: check packet size against mtu+ETH_HLEN instead of ETH_FRAME_LEN r8169: fix random mdio_write failures ip6mr: fix a typo in ip6mr_for_each_table() iwlwifi: move sysfs_create_group to post request firmware iwlwifi: add name to Maintainers list iwl3945: fix internal scan iwl3945: enable stuck queue detection on 3945 ipv6: avoid high order allocations ath5k: retain promiscuous setting ath5k: depend on CONFIG_PM_SLEEP for suspend/resume functions mac80211: process station blockack action frames from work ...
2010-06-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-09Merge branch 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'msm-urgent' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: mmc: msm: fix compile error on MSM7x30 msm: dma: add completion.h header
2010-06-09mmc: msm: fix compile error on MSM7x30Daniel Walker
MSM7x30 isn't supported in this driver yet. If ones tried to compile it in with MSM7x30 configure you get, linux-2.6/drivers/mmc/host/msm_sdcc.c: In function 'msmsdcc_fifo_addr': linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: 'MSM_SDC1_PHYS' undeclared (first use in this function) linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: (Each undeclared identifier is reported only once linux-2.6/drivers/mmc/host/msm_sdcc.c:165: error: for each function it appears in.) linux-2.6/drivers/mmc/host/msm_sdcc.c:167: error: 'MSM_SDC2_PHYS' undeclared (first use in this function) linux-2.6/drivers/mmc/host/msm_sdcc.c:169: error: 'MSM_SDC3_PHYS' undeclared (first use in this function) linux-2.6/drivers/mmc/host/msm_sdcc.c:171: error: 'MSM_SDC4_PHYS' undeclared (first use in this function) So we add a Kconfig check to prevent this. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-09misc: Fix allocation 'borrowed' by vhost_netAlan Cox
10, 233 is allocated officially to /dev/kmview which is shipping in Ubuntu and Debian distributions. vhost_net seem to have borrowed it without making a proper request and this causes regressions in the other distributions. vhost_net can use a dynamic minor so use that instead. Also update the file with a comment to try and avoid future misunderstandings. cc: stable@kernel.org Signed-off-by: Alan Cox <device@lanana.org> [ We should have caught this before 2.6.34 got released. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony camcorder
2010-06-08Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)."Linus Torvalds
This reverts commit cfecde435dda78248d6fcdc424bed68d5db6be0b, since it seems to cause some systems to not come up with any video output at all (or video that only comes on when X starts up). Fixes bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=16163 Reported-and-tested-by: David John <davidjon@xenontk.org> Tested-by: Nick Bowler <nbowler@elliptictech.com> Acked-by: Carl Worth <cworth@cworth.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (23 commits) drm/radeon: don't poll tv dac if crtc2 is in use. drm/radeon: reset i2c valid to avoid incorrect tv-out polling. drm/nv50: fix iommu errors caused by device reading from address 0 drm/nouveau: off by one in init_i2c_device_find() nouveau: off by one in nv50_gpio_location() drm/nouveau: completely fail init if we fail to map the PRAMIN BAR drm/nouveau: match U/DP script against SOR link drm/radeon/kms/pm: resurrect printing power states drm/radeon/kms: add trivial debugging for voltage drm/radeon/kms/r600+: use voltage from requested clock mode (v3) drm/radeon/kms/pm: track current voltage (v2) drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880 drm/radeon/kms: fix typo in printing the HPD info drm/radeon/kms/pm: add mid profile drm/radeon/kms/pm: Misc fixes drm/radeon/kms/combios: fix typo in voltage fix drm/radeon/kms/evergreen: set accel_enabled drm/vmwgfx: return -EFAULT for copy_to_user errors drm/drm_crtc: return -EFAULT on copy_to_user errors drm/fb: use printk to print out the switching to text mode error. ...
2010-06-08Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] arch/s390/kvm: Use GFP_ATOMIC when a lock is held [S390] kprobes: add parameter check to module_free() [S390] appldata/extmem/kvm: add missing GFP_KERNEL flag
2010-06-08Merge branch 'bkl/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: hp_sdc_rtc: fix broken ioctl conversion
2010-06-08hp_sdc_rtc: fix broken ioctl conversionArnd Bergmann
Commit 55929332c92 "drivers: Push down BKL into various drivers" introduced a regression in hp_sdc_rtc, caused by a missing change of the .unlocked_ioctl pointer to the newly introduced function. Fixes: drivers/input/misc/hp_sdc_rtc.c:681: warning: initialization from incompatible pointer type drivers/input/misc/hp_sdc_rtc.c:665: warning: ‘hp_sdc_rtc_unlocked_ioctl’ defined but not used Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-08iwlwifi: add missing rcu_read_lockJohannes Berg
Using ieee80211_find_sta() needs to be under RCU read lock, which iwlwifi currently misses, so fix it. Cc: stable@kernel.org Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08[S390] appldata/extmem/kvm: add missing GFP_KERNEL flagHeiko Carstens
Add missing GFP flag to memory allocations. The part in cio only changes a comment. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-06-08drm/radeon: don't poll tv dac if crtc2 is in use.Dave Airlie
So when we added output polling, we'd suddenly use this code more often, and the fact that it always takes over crtc2 and messes with it during probing isn't what we really want to be happening. A more complete fix would to change it to use whatever crtc was free at the time, but for now lets stay simple and just don't poll if crtc2 is already in use. Although a more correct fix was found I suspect we should do this as well, until we get a chance to readdres the tv out polling issues. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon: reset i2c valid to avoid incorrect tv-out polling.Dave Airlie
We really don't want to be polling tv-out but since we weren't forcing the i2c lines to invalid (tv-out has no DDC), we were adding tv connectors to the polling setup and this was causing blinking on secondary displays. This fixes the regression Torsten reported. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nv50: fix iommu errors caused by device reading from address 0Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nouveau: off by one in init_i2c_device_find()Dan Carpenter
dcb->i2c[] has DCB_MAX_NUM_I2C_ENTRIES entries. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08nouveau: off by one in nv50_gpio_location()Dan Carpenter
If "gpio->line" is 32 then "nv50_gpio_reg[gpio->line >> 3]" reads past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nouveau: completely fail init if we fail to map the PRAMIN BARBen Skeggs
On cards where there's a specific BAR for PRAMIN, we used to try and fall back to the "legacy" aperture within the mmio BAR. This is doomed to cause problems, so lets just fail completely as there's obviously something else very wrong anyway. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/nouveau: match U/DP script against SOR linkBen Skeggs
It appears version 0x21 'U' and 'd' tables require us to take the SOR link into account when selecting the appropriate table for a particular output. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-07Merge git://git.infradead.org/~dwmw2/mtd-2.6.35Linus Torvalds
* git://git.infradead.org/~dwmw2/mtd-2.6.35: jffs2: update ctime when changing the file's permission by setfacl jffs2: Fix NFS race by using insert_inode_locked() jffs2: Fix in-core inode leaks on error paths mtd: Fix NAND submenu mtd/r852: update card detect early. mtd/r852: Fixes in case of DMA timeout mtd/r852: register IRQ as last step drivers/mtd: Use memdup_user docbook: make mtd nand module init static
2010-06-07Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: redo stopping DMA engines on empty ports sata_sil24: fix kernel panic on ARM caused by unaligned access in sata_sil24 ahci: add pci quirk for JMB362 sata_via: explain the magic fix
2010-06-08drm/radeon/kms/pm: resurrect printing power statesRafał Miłecki
debug only agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms: add trivial debugging for voltageRafał Miłecki
agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/r600+: use voltage from requested clock mode (v3)Rafał Miłecki
This fixes FDO bug #28375, it's kind of regression, so quite important to have it for .35. V2: Fix on RV770+ as well. All other chipsets have only one clock mode per state. V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen. agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: track current voltage (v2)Alex Deucher
track the current voltage level and avoid setting it if the requested voltage is already set. v2: check voltage type before checking current voltage Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880Alex Deucher
The vddc value in the power tables is not an actual voltage like on discrete r6xx/r7xx/evergreen systems, but instead has a symbolic meaning (e.g., NONE, LOW, HIGH, etc.). See atombios.h Most RS780/RS880 vbioses don't have a SetVoltage table anyway, so it shouldn't be doing anything to the hardware at the moment. I need to figure out how voltage is supposed to work on the newer IGPs; until then, disable it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms: fix typo in printing the HPD infoAlex Deucher
I forgot to fix this in 8e36ed00842668a39a6ed1b0a00b8ac92b7c4cd5 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: add mid profileAlex Deucher
This adds an additional profile, mid, to the pm profile code which takes the place of the old low profile. The default behavior remains the same, e.g., auto profile now selects between mid and high profiles based on power source, however, you can now manually force the low profile which was previously only available as a dpms off state. Enabling the low profile when the displays are on has been known to cause display corruption in some cases. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: Misc fixesAlex Deucher
- don't rest the power state in pm_init() We already boot up to the default power state. Note this patch relies on: drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+ To make sure the default power state matches the boot up state. - In the pm resume path asic init will have set the power state back to the default so reset the tracking state values. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/combios: fix typo in voltage fixAlex Deucher
Noticed by Rafał Miłecki. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 12:42:41 +0000