summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-06-02ath9k: enable the baseband watchdog events for AR9003Luis R. Rodriguez
This enables the baseband watchdog events for the AR9003 family on ath9k. Upon an a baseband watchdog interrupt we reset the hardware, this should address corner case conditions where normal operation can stall. Enable ATH_DBG_RESET to be able to review details of the bb watchdog interrupt once it happens. If you're curious how often this happens just grep the debugfs interrupt file. Cc: Sam Ng <sam.ng@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Cc: Cliff Holden <cliff.holden@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_hw: add support for the AR9003 baseband watchdogLuis R. Rodriguez
The baseband watchdog will monitor blocks of the baseband through timers and will issue an interrupt when things are detected to be stalled. It is only available on the AR9003 family. Cc: Sam Ng <sam.ng@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Cc: Cliff Holden <cliff.holden@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02rt2x00: Move rt2x00debug_dump_frame declaration to rt2x00.h.Gertjan van Wingerde
This allows rt2x00debug_dump_frame to be used from everywhere. This is preparation for beacon writing clean ups. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: remove sdio ARM dependencyOhad Ben-Cohen
Make it possible to use wl1271's SDIO interface on non-ARM platforms. Fully tested on a x86 platform, compile-tested on ARM. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_hw: rename the ar9003_initvals.h to ar9003_2p0_initvals.hLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_hw: add support for the AR9003 2.2Luis R. Rodriguez
The checksums of the initvals are: initvals -f ar9003-2p2 0x00000000c2bfa7d5 ar9300_2p2_radio_postamble 0x00000000ada2b114 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e0bc2c84 ar9300Modes_fast_clock_2p2 0x00000000056eaf74 ar9300_2p2_radio_core 0x0000000000000000 ar9300Common_rx_gain_table_merlin_2p2 0x0000000078658fb5 ar9300_2p2_mac_postamble 0x0000000023235333 ar9300_2p2_soc_postamble 0x0000000054d41904 ar9200_merlin_2p2_radio_core 0x000000008475a084 ar9300_2p2_baseband_postamble 0x000000009aaafd90 ar9300_2p2_baseband_core 0x000000003df9a326 ar9300Modes_high_power_tx_gain_table_2p2 0x000000001cfba124 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000011302700 ar9300Common_rx_gain_table_2p2 0x00000000a9a2b114 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000a9d66d40 ar9300_2p2_mac_core 0x000000001e1d0800 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a0c531c8 ar9300_2p2_soc_preamble 0x00000000292e2544 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d3e2544 ar9300PciePhy_clkreq_enable_L1_2p2 0x00000000293e2544 ar9300PciePhy_clkreq_disable_L1_2p2 Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02mwl8k: use the dma state API instead of the pci equivalentsFUJITA Tomonori
The DMA API is preferred. No functional change. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-05-28ssb: fix NULL ptr deref when pcihost_wrapper is usedChristoph Fritz
Ethernet driver b44 does register ssb by it's pcihost_wrapper and doesn't set ssb_chipcommon. A check on this value introduced with commit d53cdbb94a52a920d5420ed64d986c3523a56743 and ea2db495f92ad2cf3301623e60cb95b4062bc484 triggers: BUG: unable to handle kernel NULL pointer dereference at 00000010 IP: [<c1266c36>] ssb_is_sprom_available+0x16/0x30 Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28libertas: fix uninitialized variable warningPrarit Bhargava
Fixes: drivers/net/wireless/libertas/rx.c: In function process_rxed_802_11_packet: drivers/net/wireless/libertas/rx.c:354: error: radiotap_hdr.flags may be used uninitialized in this function Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28ath9k: Fix bug in the way "bf_tx_aborted" of struct ath_buf is usedVasanthakumar Thiagarajan
This bug was introduced by the following commit Author: Vasanthakumar Thiagarajan <vasanth@atheros.com> Date: Thu Apr 15 17:38:46 2010 -0400 ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Wrong buffer is checked for bf_tx_aborted field in ath_tx_num_badfrms(), this may result in a rate scaling with wrong feedback (number of unacked frames in this case). It is the last one in the chain of buffers for an aggregate frame that should be checked. Also it misses the initialization of this field in the buffer, this may lead to a situation where we stop the sw retransmission of failed subframes associated to this buffer. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28ath9k: Fix ath_print in xmit for hardware reset.Justin P. Mattock
ath_print in xmit.c should say "Reseting hardware" instead of Resetting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-26ar9170usb: fix read from freed driver contextChristian Lamparter
Commit "ar9170: wait for asynchronous firmware loading" introduced a bug, which is triggered by fatal errors while the driver is initializing the device. BUG: unable to handle kernel paging request at 6b6b6bf7 IP: [<c117b567>] kobject_put+0x7/0x70 *pde = 00000000 Oops: 0000 [#1] PREEMPT last sysfs file: /sys/devices/platform/hdaps/position Modules linked in: ar9170usb [...] Pid: 6246, comm: firmware/ar9170 Not tainted 2.6.34-wl #54 EIP: 0060:[<c117b567>] EFLAGS: 00010206 CPU: 0 EIP is at kobject_put+0x7/0x70 EAX: 6b6b6bd7 EBX: f4d3d0e0 ECX: f5ba9124 EDX: f6af2a7c ESI: 00000000 EDI: f4d3d0e0 EBP: 00000000 ESP: f5e98f9c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process firmware/ar9170 (pid: 6246) Stack: c12532ed 00000246 f5bfaa70 f8487353 f4d3d0e0 Call Trace: [<c12532ed>] ? device_release_driver+0x1d/0x30 [<f8487353>] ? ar9170_usb_firmware_failed+0x43/0x70 [ar9170usb] [<c125983c>] ? request_firmware_work_func+0x2c/0x70 [<c1259810>] ? request_firmware_work_func+0x0/0x70 [<c10413f4>] ? kthread+0x74/0x80 [<c1041380>] ? kthread+0x0/0x80 [<c1003136>] ? kernel_thread_helper+0x6/0x10 Code: 40 d3 f2 ff 85 c0 89 c3 74 0a ba 44 86 4c c1 e8 [...] EIP: [<c117b567>] kobject_put+0x7/0x70 SS:ESP 0068:f5e98f9c CR2: 000000006b6b6bf7 ---[ end trace e81abb992434b410 ]--- Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-26Revert "rt2x00: Fix rt2800usb TX descriptor writing."John W. Linville
This reverts commit 663cb47cc2c5acd32850f67d051e47d62ed199c9. This patch was merged out of the proper order, so instead of fixing a problem with a prior (unmerged) patch, it creates one. Ooops! Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-25ath9k: remove VEOL support for ad-hocFelix Fietkau
With VEOL, Beacon transmission in ad-hoc does not currently work. I believe for larger ad-hoc networks, VEOL is too unreliable, as it can get beacon transmissions stuck during synchronization. Use SWBA based beacon trasmission similar to AP mode instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-25ath9k: change beacon allocation to prefer the first beacon slotFelix Fietkau
This fixes IBSS beacon transmissions without VEOL enabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleepVasanthakumar Thiagarajan
The functionality to keep the device awake until it is done with the rx of any mcast/bcast frames which are pending on AP should also be added to the hardwares which support auto sleep feature. This patch fixes frequent failures in ARP resolution when it is initiated by the other end. Currently auto sleep is enabled only for ar9003 in ath9k. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24iwlwifi: testing the wrong variable in iwl_add_bssid_station()Dan Carpenter
The intent here is to test that "sta_id_r" is a valid pointer. We do this same test later on in the function. Btw iwl_add_bssid_station() is called from two places and "sta_id_r" is a valid pointer from both callers. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs()Dan Carpenter
This is obviously a small picky thing. The original error handling code doesn't free the most recent allocations which haven't been added to the hif_dev->tx.tx_buf list yet. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath9k_htc: dereferencing before check in hif_usb_tx_cb()Dan Carpenter
After c11d8f89d3b7: "ath9k_htc: Simplify TX URB management" we no longer assume that tx_buf is a non-null pointer. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: Fix rt2800usb TX descriptor writing.Gertjan van Wingerde
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.Gertjan van Wingerde
(Based on a patch created by Ondrej Zary) In some circumstances the Ralink devices do not properly go to sleep or wake up, with timeouts occurring. Fix this by retrying telling the device that it has to wake up or sleep. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24Revert "ath9k: Group Key fix for VAPs"John W. Linville
This reverts commit 03ceedea972a82d343fa5c2528b3952fa9e615d5. This patch was reported to cause a regression in which connectivity is lost and cannot be reestablished after a suspend/resume cycle. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24wireless: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: don't use to_pci_dev in rt2x00pci_uninitializeHelmut Schaa
Don't use to_pci_dev in rt2x00pci_uninitialize to get the allocated irq as it won't work for platform devices (SoC). Instead, use the irq field that's already used everywhere else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24ath5k: consistently use rx_bufsize for RX DMABruno Randolf
We should use the same buffer size we set up for DMA also in the hardware descriptor. Previously we used common->rx_bufsize for setting up the DMA mapping, but used skb_tailroom(skb) for the size we tell to the hardware in the descriptor itself. The problem is that skb_tailroom(skb) can give us a larger value than the size we set up for DMA before. This allows the hardware to write into memory locations not set up for DMA. In practice this should rarely happen because all packets should be smaller than the maximum 802.11 packet size. On the tested platform rx_bufsize is 2528, and we allocated an skb of 2559 bytes length (including padding for cache alignment) but sbk_tailroom() was 2592. Just consistently use rx_bufsize for all RX DMA memory sizes. Also use the return value of the descriptor setup function. Cc: stable@kernel.org Signed-off-by: Bruno Randolf <br1@einfach.org> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21rndis_wlan: replace wireless_send_event with cfg80211_disconnectedJussi Kivilinna
Remove (hopefully) last use of WEXT in rndis_wlan. Replace wireless_send_event with missing cfg80211_disconnected in rndis_wlan_do_link_down_work. Reported-by: "Rogério Brito" <rbrito@ime.usp.br> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21ath9k: remove AR9003 from PCI IDs for nowLuis R. Rodriguez
We tried to squeeze as much AR9003 support into this kernel release cycle but there are a few features which are still being tested and developed. Some of these features are critical to the stable operation of AR9003 so for now disable AR9003 support all together. This will get re-enabled once all necessary features are in place but very likely will not happen for 2.6.35. Reviewed-by: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21wl1271: Fix RX data path frame lengthsJuuso Oikarinen
The current frame length used by the driver for RX frames is the SPI bus transfer length. This length has padding bytes, which do not belong to the WLAN frame. As there is no other length information in the WLAN frame except the skb length this problem caused for instance extra ESSID's to be listed at the end of scan results (IE id 0) with zero length. Fix the frame length by removing padding. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-21iwlwifi: fix internal scan raceReinette Chatre
It is possible for internal scan to race against itself if the device is not returning the scan results from first requests. What happens in this case is the cleanup done during the abort of the first internal scan also cleans up part of the new scan, causing it to access memory it shouldn't. Here are details: * First internal scan is triggered and scan command sent to device. * After seven seconds there is no scan results so the watchdog timer triggers a scan abort. * The scan abort succeeds and a SCAN_COMPLETE_NOTIFICATION is received for failed scan. * During processing of SCAN_COMPLETE_NOTIFICATION we clear STATUS_SCANNING and queue the "scan_completed" work. ** At this time, since the problem that caused the internal scan in first place is still present, a new internal scan is triggered. The behavior at this point is a bit different between 2.6.34 and 2.6.35 since 2.6.35 has a lot of this synchronized. The rest of the race description will thus be generalized. ** As part of preparing for the scan "is_internal_short_scan" is set to true. * At this point the completion work for fist scan is run. As part of this there is some locking missing around the "is_internal_short_scan" variable and it is set to "false". ** Now the second scan runs and it considers itself a real (not internal0 scan and thus causes problems with wrong memory being accessed. The fix is twofold. * Since "is_internal_short_scan" should be protected by mutex, fix this in scan completion work so that changes to it can be serialized. * Do not queue a new internal scan if one is in progress. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15824 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-20can: SJA1000 add missing spin_lock_init()Oliver Hartkopp
As remarked by Sam Ravnborg the spin_lock variable, that has been introduced in commit 57c8a456640fa3ca777652f11f2db4179a3e66b6 ("can: Fix SJA1000 command register writes on SMP systems") has not been initialized properly. This patch adds the initialization to allow spinlock debugging. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-20sh_eth: Fix memleak in sh_mdio_releaseDenis Kirjanov
Allocated memory for IRQs should be freed when releasing the mii_bus Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-20ixgbe:add support for a new 82599 10G Base-T deviceMallikarjuna R Chilakala
This adds support for a new copper device for 82599, device id 0x151c. This 82599 10GBase-T device uses the PHY's internal temperature sensor to guard against over-temp conditions. In this scenario the PHY will be put in a low power mode and link will no longer be able to transmit or receive any data. When this occurs, the over-temp interrupt is latched and driver logs this error message. A HW reset or power cycle is required to clear this status. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20Merge branch 'viafb-next' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'viafb-next' of git://git.lwn.net/linux-2.6: (35 commits) viafb: move some include files to include/linux viafb: Eliminate some global.h references viafb: get rid of i2c debug cruft viafb: fold via_io.h into via-core.h viafb: Fix initialization error paths viafb: Do not remove gpiochip under spinlock viafb: make procfs entries optional viafb: fix proc entry removal viafb: improve misc register handling viafb: replace inb/outb viafb: move some modesetting functions to a seperate file viafb: unify modesetting functions viafb: Reserve framebuffer memory for the upcoming camera driver viafb: Add a simple VX855 DMA engine driver viafb: Add a simple interrupt management infrastructure via: Rationalize vt1636 detection viafb: Introduce viafb_find_i2c_adapter() via: Do not attempt I/O on inactive I2C adapters viafb: Turn GPIO and i2c into proper platform devices viafb: Convert GPIO and i2c to the new indexed port ops ...
2010-05-20usb: musb: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ftdi_sio: fix legacy SIO-device headerJohan Hovold
Length field of header was incorrectly set to available payload space rather than the actual payload size. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5usb105: reimplement using generic frameworkJohan Hovold
Kill custom read and write implementations (static per-port, singleton(!) urb pool). Also remove changelog header (can be retrieved through git). Read processing and write-buffer handling tested using a cp210x device in a loopback setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5usb105: minor clean upsJohan Hovold
Whitespace changes and some removed comments. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: kl5usb105: fix memory leakJohan Hovold
Private data was not freed on error path in startup. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: io_ti: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: io_ti: remove unsused private counterJohan Hovold
Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ti_usb: use kfifo to implement write bufferingJohan Hovold
Kill custom fifo implementation. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ir-usb: fix incorrect write-buffer lengthJohan Hovold
Returned length should include header length. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: aircable: fix incorrect write-buffer lengthJohan Hovold
Returned length should include header length. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: safe_serial: straighten out read processingJohan Hovold
Clean up read processing logic. Tested using a cp210x device in a loopback setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: safe_serial: reimplement read using generic frameworkJohan Hovold
Use process_read_urb to implement read processing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: safe_serial: reimplement write using generic frameworkJohan Hovold
Kill custom single-urb write implementation. Note that this driver still depended on the write callback from the old generic framework. Tested against original read processing using a cp210x device in a loopback setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb-storage: always print quirksFelipe Contreras
Right now quirks are printed only when the are manually overriden with the module parameters. It's not so useful to remind the user that his parameters are correctly applied; what is useful is to print out the quirks the user is not aware are being applied. So let's do the smart thing and print the quirks when they are present. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 07:22:26 +0000