| Age | Commit message (Collapse) | Author |
|---|
|
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
|
|
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Pull more SCSI updates from James Bottomley:
"This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers.
The one non-driver set is the three optical disk (sr) changes where
two are error path fixes and one is a helper conversion.
The big driver change is the hpsa compat_alloc_userspace rework by Al
so he can kill the remaining user. This has been tested and acked by
the maintainer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
scsi: cxlflash: Remove an unnecessary NULL check
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: sr: Fix sr_probe() missing mutex_destroy
scsi: st: Convert convert get_user_pages() --> pin_user_pages()
scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
scsi: target: Fix NULL pointer dereference
scsi: target: Initialize LUN in transport_init_se_cmd()
scsi: target: Factor out a new helper, target_cmd_init_cdb()
scsi: hpsa: hpsa_ioctl(): Tidy up a bit
scsi: hpsa: Get rid of compat_alloc_user_space()
scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
scsi: ufs: Remove redundant urgent_bkop_lvl initialization
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
scsi: qedf: Remove redundant initialization of variable rc
scsi: mpt3sas: Fix memset() in non-RDPQ mode
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has quite some patches for you this time. I hope it is the move to
per-driver-maintainers which is now showing results. We will see.
The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
larger refactoring of the Designware, Tegra, and PXA drivers, the
Cadence driver supports being a slave now, and there is support to
instanciate SPD eeproms for well-known cases (which will be
user-visible because the i801 driver supports it), and some
devm_platform_ioremap_resource() conversions which blow up the
diffstat.
Note that I applied the Nuvoton driver quite late, so some minor fixup
patches arrived during the merge window. I chose to apply them right
away because they were trivial"
* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
i2c: Drop stray comma in MODULE_AUTHOR statements
i2c: npcm7xx: npcm_i2caddr[] can be static
MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
i2c: npcm7xx: Fix a couple of error codes in probe
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
i2c: npcm7xx: Remove unnecessary parentheses
i2c: npcm7xx: Add support for slave mode for Nuvoton
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
dt-bindings: i2c: npcm7xx: add NPCM I2C controller
i2c: pxa: don't error out if there's no pinctrl
i2c: add 'single-master' property to generic bindings
i2c: designware: Add Baikal-T1 System I2C support
i2c: designware: Move reg-space remapping into a dedicated function
i2c: designware: Retrieve quirk flags as early as possible
i2c: designware: Convert driver to using regmap API
i2c: designware: Discard Cherry Trail model flag
i2c: designware: Add Baytrail sem config DW I2C platform dependency
i2c: designware: slave: Set DW I2C core module dependency
i2c: designware: Use `-y` to build multi-object modules
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull more media updates from Mauro Carvalho Chehab:
- a set of atomisp patches. They remove several abstraction layers, and
fixes clang and gcc warnings (that were hidden via some macros that
were disabling 4 or 5 types of warnings there). There are also some
important fixes and sensor auto-detection on newer BIOSes via ACPI
_DCM tables.
- some fixes
* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
media: rkvdec: Fix H264 scaling list order
media: v4l2-ctrls: Unset correct HEVC loop filter flag
media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
media: v4l2-subdev.rst: correct information about v4l2 events
media: s5p-mfc: Properly handle dma_parms for the allocated devices
media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
media: cedrus: Implement runtime PM
media: cedrus: Program output format during each run
media: atomisp: improve ACPI/DMI detection logs
media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
media: Revert "media: atomisp: Add some ACPI detection info"
media: atomisp: improve sensor detection code to use _DSM table
media: atomisp: get rid of an iomem abstraction layer
media: atomisp: get rid of a string_support.h abstraction layer
media: atomisp: use strscpy() instead of less secure variants
media: atomisp: set DFS to MAX if sensor doesn't report fps
media: atomisp: use different dfs failed messages
media: atomisp: change the detection of ISP2401 at runtime
media: atomisp: use macros from intel-family.h
media: atomisp: don't set hpll_freq twice with different values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Small collection of cleanups to rework usage of ->queuedata and the
GUID api"
* tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: stop using ->queuedata
nvdimm/btt: stop using ->queuedata
nvdimm/blk: stop using ->queuedata
libnvdimm: Replace guid_copy() with import_guid() where it makes sense
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Thomas Gleixner:
"RAS updates from Borislav Petkov:
- Unmap a whole guest page if an MCE is encountered in it to avoid
follow-on MCEs leading to the guest crashing, by Tony Luck.
This change collided with the entry changes and the merge
resolution would have been rather unpleasant. To avoid that the
entry branch was merged in before applying this. The resulting code
did not change over the rebase.
- AMD MCE error thresholding machinery cleanup and hotplug
sanitization, by Thomas Gleixner.
- Change the MCE notifiers to denote whether they have handled the
error and not break the chain early by returning NOTIFY_STOP, thus
giving the opportunity for the later handlers in the chain to see
it. By Tony Luck.
- Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov.
- Last but not least, the usual round of fixes and improvements"
* tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/mce/dev-mcelog: Fix -Wstringop-truncation warning about strncpy()
x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned
EDAC/amd64: Add AMD family 17h model 60h PCI IDs
hwmon: (k10temp) Add AMD family 17h model 60h PCI match
x86/amd_nb: Add AMD family 17h model 60h PCI IDs
x86/mcelog: Add compat_ioctl for 32-bit mcelog support
x86/mce: Drop bogus comment about mce.kflags
x86/mce: Fixup exception only for the correct MCEs
EDAC: Drop the EDAC report status checks
x86/mce: Add mce=print_all option
x86/mce: Change default MCE logger to check mce->kflags
x86/mce: Fix all mce notifiers to update the mce->kflags bitmask
x86/mce: Add a struct mce.kflags field
x86/mce: Convert the CEC to use the MCE notifier
x86/mce: Rename "first" function as "early"
x86/mce/amd, edac: Remove report_gart_errors
x86/mce/amd: Make threshold bank setting hotplug robust
x86/mce/amd: Cleanup threshold device remove path
x86/mce/amd: Straighten CPU hotplug path
x86/mce/amd: Sanitize thresholding device creation hotplug path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Thomas Gleixner:
"The x86 entry, exception and interrupt code rework
This all started about 6 month ago with the attempt to move the Posix
CPU timer heavy lifting out of the timer interrupt code and just have
lockless quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and
the review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some
inconsistencies vs. instrumentation in general. The int3 text poke
handling in particular was completely unprotected and with the batched
update of trace events even more likely to expose to endless int3
recursion.
In parallel the RCU implications of instrumenting fragile entry code
came up in several discussions.
The conclusion of the x86 maintainer team was to go all the way and
make the protection against any form of instrumentation of fragile and
dangerous code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit
d5f744f9a2ac ("Pull x86 entry code updates from Thomas Gleixner")
That (almost) full solution introduced a new code section
'.noinstr.text' into which all code which needs to be protected from
instrumentation of all sorts goes into. Any call into instrumentable
code out of this section has to be annotated. objtool has support to
validate this.
Kprobes now excludes this section fully which also prevents BPF from
fiddling with it and all 'noinstr' annotated functions also keep
ftrace off. The section, kprobes and objtool changes are already
merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the
noinstr.text section or enforcing inlining by marking them
__always_inline so the compiler cannot misplace or instrument
them.
- Splitting and simplifying the idtentry macro maze so that it is
now clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now
calls into C after doing the really necessary ASM handling and
the return path goes back out without bells and whistels in
ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3
recursion issue.
- Consolidate the declaration and definition of entry points between
32 and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the
regular exception entry code.
- All ASM entry points except NMI are now generated from the shared
header file and the corresponding macros in the 32 and 64 bit
entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central
point that all corresponding entry points share the same
semantics. The actual function body for most entry points is in an
instrumentable and sane state.
There are special macros for the more sensitive entry points, e.g.
INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required
other isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and
disable it on NMI, #MC entry, which allowed to get rid of the
nested #DB IST stack shifting hackery.
- A few other cleanups and enhancements which have been made
possible through this and already merged changes, e.g.
consolidating and further restricting the IDT code so the IDT
table becomes RO after init which removes yet another popular
attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this
was not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they
have not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle
code especially the parts where RCU stopped watching. This was
beyond the scope of the more obvious and exposable problems and is
on the todo list.
The lesson learned from this brain melting exercise to morph the
evolved code base into something which can be validated and understood
is that once again the violation of the most important engineering
principle "correctness first" has caused quite a few people to spend
valuable time on problems which could have been avoided in the first
place. The "features first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to
this effort. Special thanks go to the following people (alphabetical
order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian
Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai
Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra,
Vitaly Kuznetsov, and Will Deacon"
* tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits)
x86/entry: Force rcu_irq_enter() when in idle task
x86/entry: Make NMI use IDTENTRY_RAW
x86/entry: Treat BUG/WARN as NMI-like entries
x86/entry: Unbreak __irqentry_text_start/end magic
x86/entry: __always_inline CR2 for noinstr
lockdep: __always_inline more for noinstr
x86/entry: Re-order #DB handler to avoid *SAN instrumentation
x86/entry: __always_inline arch_atomic_* for noinstr
x86/entry: __always_inline irqflags for noinstr
x86/entry: __always_inline debugreg for noinstr
x86/idt: Consolidate idt functionality
x86/idt: Cleanup trap_init()
x86/idt: Use proper constants for table size
x86/idt: Add comments about early #PF handling
x86/idt: Mark init only functions __init
x86/entry: Rename trace_hardirqs_off_prepare()
x86/entry: Clarify irq_{enter,exit}_rcu()
x86/entry: Remove DBn stacks
x86/entry: Remove debug IDT frobbing
x86/entry: Optimize local_db_save() for virt
...
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Ensure that all scheduled work items have completed before continuing
with device removal and after further event scheduling has been
halted. This patch fixes a bug where a scheduled driver reset event
is processed following device removal.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
private structures) (Daniel Lezcano)
- Use the PM QoS frequency changes for the devfreq cooling device
(Matthias Kaehlcke)
- Remove duplicate error messages from platform_get_irq() error
handling (Markus Elfring)
- Add support for the bandgap sensors (Keerthy)
- Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
- Add Renesas R-Car maintainer entry (Niklas Söderlund)
- Fix error checking after calling ti_bandgap_get_sensor_data() for the
TI SoC thermal (Sudip Mukherjee)
- Add latency constraint for the idle injection, the DT binding and the
change the registering function (Daniel Lezcano)
- Convert the thermal framework binding to the Yaml schema (Amit
Kucheria)
- Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
R. Silva)
- Thermal framework cleanups (alphabetic order for heads, replace
module.h by export.h, make file naming consistent) (Amit Kucheria)
- Merge tsens-common into the tsens driver (Amit Kucheria)
- Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
- Clean up the rcar_thermal_update_temp() function in the rcar thermal
driver (Niklas Söderlund)
- Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
Tang)
- Export GDDV, OEM vendor variables, and don't require IDSP for the
int340x thermal driver - trivial conflicts fixed (Matthew Garrett)
* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
thermal/int340x_thermal: Don't require IDSP to exist
thermal/int340x_thermal: Export OEM vendor variables
thermal/int340x_thermal: Export GDDV
thermal: qoriq: Update the settings for TMUv2
thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
thermal: qoriq: Add platform dependencies
drivers: thermal: tsens: Merge tsens-common.c into tsens.c
thermal/of: Rename of-thermal.c
thermal/governors: Prefix all source files with gov_
thermal/drivers/user_space: Sort headers alphabetically
thermal/drivers/of-thermal: Sort headers alphabetically
thermal/drivers/cpufreq_cooling: Replace module.h with export.h
thermal/drivers/cpufreq_cooling: Sort headers alphabetically
thermal/drivers/clock_cooling: Include export.h
thermal/drivers/clock_cooling: Sort headers alphabetically
thermal/drivers/thermal_hwmon: Include export.h
thermal/drivers/thermal_hwmon: Sort headers alphabetically
thermal/drivers/thermal_helpers: Include export.h
thermal/drivers/thermal_helpers: Sort headers alphabetically
thermal/core: Replace module.h with export.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Nothing too exciting for this cycle. A couple of fixes across the
board, and Lee volunteered to help with patch review"
* tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Add missing "CONFIG_" prefix
MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem
pwm: imx27: Fix rounding behavior
pwm: rockchip: Simplify rockchip_pwm_get_state()
pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
pwm: tegra: Support dynamic clock frequency configuration
pwm: jz4740: Add support for the JZ4725B
pwm: jz4740: Make PWM start with the active part
pwm: jz4740: Enhance precision in calculation of duty cycle
pwm: jz4740: Drop dependency on MACH_INGENIC
pwm: lpss: Fix get_state runtime-pm reference handling
pwm: sun4i: Support direct clock output on Allwinner A64
pwm: Add support for Azoteq IQS620A PWM generator
dt-bindings: pwm: rcar: add r8a77961 support
pwm: Add missing '\n' in log messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu driver directory structure cleanup from Joerg Roedel:
"Move the Intel and AMD IOMMU drivers into their own subdirectory.
Both drivers consist of several files by now and giving them their own
directory unclutters the IOMMU top-level directory a bit"
* tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Move Intel IOMMU driver into subdirectory
iommu/amd: Move AMD IOMMU driver into subdirectory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- several smaller cleanups
- a fix for a Xen guest regression with CPU offlining
- a small fix in the xen pvcalls backend driver
- an update of MAINTAINERS
* tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
xen/pci: Get rid of verbose_request and use dev_dbg() instead
xenbus: Use dev_printk() when possible
xen-pciback: Use dev_printk() when possible
xen: enable BALLOON_MEMORY_HOTPLUG by default
xen: expand BALLOON_MEMORY_HOTPLUG description
xen/pvcalls: Make pvcalls_back_global static
xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests
xen-platform: Constify dev_pm_ops
xen/pvcalls-back: test for errors when calling backend_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull the Kernel Concurrency Sanitizer from Thomas Gleixner:
"The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector,
which relies on compile-time instrumentation, and uses a
watchpoint-based sampling approach to detect races.
The feature was under development for quite some time and has already
found legitimate bugs.
Unfortunately it comes with a limitation, which was only understood
late in the development cycle:
It requires an up to date CLANG-11 compiler
CLANG-11 is not yet released (scheduled for June), but it's the only
compiler today which handles the kernel requirements and especially
the annotations of functions to exclude them from KCSAN
instrumentation correctly.
These annotations really need to work so that low level entry code and
especially int3 text poke handling can be completely isolated.
A detailed discussion of the requirements and compiler issues can be
found here:
https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
We came to the conclusion that trying to work around compiler
limitations and bugs again would end up in a major trainwreck, so
requiring a working compiler seemed to be the best choice.
For Continous Integration purposes the compiler restriction is
manageable and that's where most xxSAN reports come from.
For a change this limitation might make GCC people actually look at
their bugs. Some issues with CSAN in GCC are 7 years old and one has
been 'fixed' 3 years ago with a half baken solution which 'solved' the
reported issue but not the underlying problem.
The KCSAN developers also ponder to use a GCC plugin to become
independent, but that's not something which will show up in a few
days.
Blocking KCSAN until wide spread compiler support is available is not
a really good alternative because the continuous growth of lockless
optimizations in the kernel demands proper tooling support"
* tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining
compiler.h: Move function attributes to compiler_types.h
compiler.h: Avoid nested statement expression in data_race()
compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE()
kcsan: Update Documentation to change supported compilers
kcsan: Remove 'noinline' from __no_kcsan_or_inline
kcsan: Pass option tsan-instrument-read-before-write to Clang
kcsan: Support distinguishing volatile accesses
kcsan: Restrict supported compilers
kcsan: Avoid inserting __tsan_func_entry/exit if possible
ubsan, kcsan: Don't combine sanitizer with kcov on clang
objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn()
kcsan: Add __kcsan_{enable,disable}_current() variants
checkpatch: Warn about data_race() without comment
kcsan: Use GFP_ATOMIC under spin lock
Improve KCSAN documentation a bit
kcsan: Make reporting aware of KCSAN tests
kcsan: Fix function matching in report
kcsan: Change data_race() to no longer require marking racing accesses
kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h
...
|
|
Only QMAP endpoints should be configured to find a pad size field
within packet headers. They are found in the first byte of the QMAP
header (and the hardware fills only the 6 bits in that byte that
constitute the pad_len field).
The RMNet driver assumes the pad_len field is valid for received
packets, so we want to ensure the pad_len field is filled in that
case. That driver also assumes the length in the QMAP header
includes the pad bytes.
The RMNet driver does *not* pad the packets it sends, so the pad_len
field can be ignored.
Fix ipa_endpoint_init_hdr_ext() so it only marks the pad field
offset valid for QMAP RX endpoints, and in that case indicates
that the length field in the header includes the pad bytes.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The upper two nibbles of the sequencer type were not used for
SDM845, and were assumed to be 0. But for SC7180 they are used, and
so they must be programmed by ipa_endpoint_init_seq(). Fix this bug.
IPA_SEQ_PKT_PROCESS_NO_DEC_NO_UCP_DMAP doesn't have a descriptive
comment, so add one.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The endpoint id assigned to the modem LAN RX endpoint for the SC7180 SoC
is incorrect. The erroneous value might have been copied from SDM845 and
never updated. The correct endpoint id to use for this SoC is 11.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The way the mask value is programmed for QMAP RX endpoints was based
on some wrong assumptions about the way metadata containing the QMAP
mux_id value is formatted. The metadata value supplied by the
modem is *not* in QMAP format, and in fact contains the mux_id we
want in its (big endian) low-order byte. That byte must be written
by the IPA into offset 1 of the QMAP header it inserts before the
received packet.
QMAP TX endpoints *do* use a QMAP header as the metadata sent with
each packet. The modem assumes this, and based on that assumes the
mux_id is in the second byte. To match those assumptions we must
program the modem TX (QMAP) endpoint HDR register to indicate the
metadata will be found at offset 0 in the message header.
The previous configuration managed to work, but it was not working
correctly. This patch fixes a bug whose symptom was receipt of
messages containing the wrong QMAP mux_id.
In fixing this, get rid of ipa_rmnet_mux_id_metadata_mask(), which
was more or less defined so there was a separate place to explain
what was happening as we generated the mask value. Instead, put a
longer description of how this works above ipa_endpoint_init_hdr(),
and define the metadata mask to use as a simple constant.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Print the PCIe link information for our device.
Fixes: 77f972a7077d ("ionic: remove support for mgmt device")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-06-11
This series contains fixes to the iavf driver.
Brett fixes the supported link speeds in the iavf driver, which was only
able to report speeds that the i40e driver supported and was missing the
speeds supported by the ice driver. In addition, fix how 2.5 and 5.0
GbE speeds are reported.
Alek fixes a enum comparison that was comparing two different enums that
may have different values, so update the comparison to use matching
enums.
Paul increases the time to complete a reset to allow for 128 VFs to
complete a reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull updates from Andrew Morton:
"A few fixes and stragglers.
Subsystems affected by this patch series: mm/memory-failure, ocfs2,
lib/lzo, misc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
amdgpu: a NULL ->mm does not mean a thread is a kthread
lib/lzo: fix ambiguous encoding bug in lzo-rle
ocfs2: fix build failure when TCP/IP is disabled
mm/memory-failure: send SIGBUS(BUS_MCEERR_AR) only to current thread
mm/memory-failure: prioritize prctl(PR_MCE_KILL) over vm.memory_failure_early_kill
|
|
Use the proper API instead.
Fixes: 70539bd795002 ("drm/amd: Update MEC HQD loading code for KFD")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200404094101.672954-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"Some followup fixes for this merge window. In particular:
- Seqcount write missing preemption disable for stats (Ahmed)
- blktrace fixes (Chaitanya)
- Redundant initializations (Colin)
- Various small NVMe fixes (Chaitanya, Christoph, Daniel, Max,
Niklas, Rikard)
- loop flag bug regression fix (Martijn)
- blk-mq tagging fixes (Christoph, Ming)"
* tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-block:
umem: remove redundant initialization of variable ret
pktcdvd: remove redundant initialization of variable ret
nvmet: fail outstanding host posted AEN req
nvme-pci: use simple suspend when a HMB is enabled
nvme-fc: don't call nvme_cleanup_cmd() for AENs
nvmet-tcp: constify nvmet_tcp_ops
nvme-tcp: constify nvme_tcp_mq_ops and nvme_tcp_admin_mq_ops
nvme: do not call del_gendisk() on a disk that was never added
blk-mq: fix blk_mq_all_tag_iter
blk-mq: split out a __blk_mq_get_driver_tag helper
blktrace: fix endianness for blk_log_remap()
blktrace: fix endianness in get_pdu_int()
blktrace: use errno instead of bi_status
block: nr_sects_write(): Disable preemption on seqcount write
block: remove the error argument to the block_bio_complete tracepoint
loop: Fix wrong masking of status flags
block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
|
|
We can't leave "counter" set to an error pointer. Otherwise either it
will lead to an error pointer dereference later in the function or it
leads to an error pointer dereference when we call mlx5_fc_destroy().
Fixes: 07bab9502641d ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Clang warns:
drivers/net/ethernet/mellanox/mlx5/core/main.c:1278:6: warning: variable
'err' is used uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
if (!priv->dbg_root) {
^~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/main.c:1303:9: note:
uninitialized use occurs here
return err;
^~~
drivers/net/ethernet/mellanox/mlx5/core/main.c:1278:2: note: remove the
'if' if its condition is always false
if (!priv->dbg_root) {
^~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/main.c:1259:9: note: initialize
the variable 'err' to silence this warning
int err;
^
= 0
1 warning generated.
The check of returned value of debugfs_create_dir() is wrong because
by the design debugfs failures should never fail the driver and the
check itself was wrong too. The kernel compiled without CONFIG_DEBUG_FS
will return ERR_PTR(-ENODEV) and not NULL as expected.
Fixes: 11f3b84d7068 ("net/mlx5: Split mdev init and pci init")
Link: https://github.com/ClangBuiltLinux/linux/issues/1042
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Set the ipv6 word fields according to the hardware definitions.
Fixes: ac991b48d43c ("net/mlx5e: CT: Offload established flows")
Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Current below problems exists.
1. devlink device is registered by mlx5_load_one(). But it is
not unregistered by mlx5_unload_one(). This is incorrect.
2. Above issue leads to,
When mlx5 PCI device is removed, currently devlink device is
unregistered before devlink ports are unregistered in below ladder
diagram.
remove_one()
mlx5_devlink_unregister()
[..]
devlink_unregister() <- ports are still registered!
mlx5_unload_one()
mlx5_unregister_device()
mlx5_remove_device()
mlx5e_remove()
mlx5e_devlink_port_unregister()
devlink_port_unregister()
3. Condition checking for registering and unregister device are not
symmetric either in these routines.
Hence, fix the sequence by having load and unload routines symmetric
and in right order.
i.e.
(a) register devlink device followed by registering devlink ports
(b) unregister devlink ports followed by devlink device
Do this based on boot and cleanup flags instead of different
conditions.
Fixes: c6acd629eec7 ("net/mlx5e: Add support for devlink-port in non-representors mode")
Fixes: f60f315d339e ("net/mlx5e: Register devlink ports for physical link, PCI PF, VFs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
While unregistration is in progress, user might be reloading the
interface.
This can race with unregistration in below flow which uses the
resources which are getting disabled by reload flow.
Hence, disable the devlink reloading first when removing the device.
CPU0 CPU1
---- ----
local_pci_remove() devlink_mutex
remove_one() devlink_nl_cmd_reload()
mlx5_unregister_device() devlink_reload()
ops->reload_down()
mlx5_unload_one()
Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Changing RX hash function requires rearranging of RQT internal indexes,
the user isn't exposed to such changes and these changes do not affect
the user configured indirection table. Rebuild RQ table on hfunc change.
Fixes: bdfc028de1b3 ("net/mlx5e: Fix ethtool RX hash func configuration change")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
After an XSK is closed, the relevant structures in the channel are not
zeroed. If an XSK is opened the second time on the same channel without
recreating channels, the stray values in the structures will lead to
incorrect operation of queues, which causes CQE errors, and the new
socket doesn't work at all.
This patch fixes the issue by explicitly zeroing XSK-related structs in
the channel on XSK close. Note that those structs are zeroed on channel
creation, and usually a configuration change (XDP program is set)
happens on XSK open, which leads to recreating channels, so typical XSK
usecases don't suffer from this issue. However, if XSKs are opened and
closed on the same channel without removing the XDP program, this bug
reproduces.
Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Variable "in" in dr_create_rc_qp() is allocated with kvzalloc() and
should be freed with kvfree().
Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently, in case of fatal error during mlx5_load_one(), we cannot
enter error state until mlx5_load_one() is finished, what can take
several minutes until commands will get timeouts, because these commands
can't be processed due to the fatal error.
Fix it by setting dev->state as MLX5_DEVICE_STATE_INTERNAL_ERROR before
requesting the lock.
Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread")
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In case there is a work in the health WQ when we teardown the driver,
in driver load error flow, the health work will try to read dev->iseg,
which was already unmap in mlx5_pci_close().
Fix it by draining the health workqueue first thing in mlx5_pci_close().
Trace of the error:
BUG: unable to handle page fault for address: ffffb5b141c18014
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 1fe95d067 P4D 1fe95d067 PUD 1fe95e067 PMD 1b7823067 PTE 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 6755 Comm: kworker/u128:2 Not tainted 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
RIP: 0010:ioread32be+0x30/0x40
Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03
RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292
RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014
RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0
R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20
FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? mlx5_health_try_recover+0x4d/0x270 [mlx5_core]
mlx5_fw_fatal_reporter_recover+0x16/0x20 [mlx5_core]
devlink_health_reporter_recover+0x1c/0x50
devlink_health_report+0xfb/0x240
mlx5_fw_fatal_reporter_err_work+0x65/0xd0 [mlx5_core]
process_one_work+0x1fb/0x4e0
? process_one_work+0x16b/0x4e0
worker_thread+0x4f/0x3d0
kthread+0x10d/0x140
? process_one_work+0x4e0/0x4e0
? kthread_cancel_delayed_work_sync+0x20/0x20
ret_from_fork+0x1f/0x30
Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache 8021q garp mrp stp llc ipmi_devintf ipmi_msghandler rpcrdma rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm mlx5_ib ib_uverbs ib_core mlx5_core sb_edac crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 mlxfw crypto_simd cryptd glue_helper input_leds hyperv_fb intel_rapl_perf joydev serio_raw pci_hyperv pci_hyperv_mini mac_hid hv_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel ip_tables x_tables autofs4 hv_utils hid_generic hv_storvsc ptp hid_hyperv hid hv_netvsc hyperv_keyboard pps_core scsi_transport_fc psmouse hv_vmbus i2c_piix4 floppy pata_acpi
CR2: ffffb5b141c18014
---[ end trace b12c5503157cad24 ]---
RIP: 0010:ioread32be+0x30/0x40
Code: 00 77 27 48 81 ff 00 00 01 00 76 07 0f b7 d7 ed 0f c8 c3 55 48 c7 c6 3b ee d5 9f 48 89 e5 e8 67 fc ff ff b8 ff ff ff ff 5d c3 <8b> 07 0f c8 c3 66 66 2e 0f 1f 84 00 00 00 00 00 48 81 fe ff ff 03
RSP: 0018:ffffb5b14c56fd78 EFLAGS: 00010292
RAX: ffffb5b141c18000 RBX: ffff8e9f78a801c0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8e9f7ecd7628 RDI: ffffb5b141c18014
RBP: ffffb5b14c56fd90 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8e9f372a2c30 R11: ffff8e9f87f4bc40 R12: ffff8e9f372a1fc0
R13: ffff8e9f78a80000 R14: ffffffffc07136a0 R15: ffff8e9f78ae6f20
FS: 0000000000000000(0000) GS:ffff8e9f7ecc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffb5b141c18014 CR3: 00000001c8f82006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:38
in_atomic(): 0, irqs_disabled(): 1, pid: 6755, name: kworker/u128:2
INFO: lockdep is turned off.
CPU: 3 PID: 6755 Comm: kworker/u128:2 Tainted: G D 5.2.0-net-next-mlx5-hv_stats-over-last-worked-hyperv #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
Workqueue: mlx5_healtha050:00:02.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
dump_stack+0x63/0x88
___might_sleep+0x10a/0x130
__might_sleep+0x4a/0x80
exit_signals+0x33/0x230
? blocking_notifier_call_chain+0x16/0x20
do_exit+0xb1/0xc30
? kthread+0x10d/0x140
? process_one_work+0x4e0/0x4e0
Fixes: 52c368dc3da7 ("net/mlx5: Move health and page alloc init to mdev_init")
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
With an increased number of VFs, it's possible to encounter the following
issue during reset.
iavf b8d4:00:02.0: Hardware reset detected
iavf b8d4:00:02.0: Reset never finished (0)
iavf b8d4:00:02.0: Reset task did not complete, VF disabled
Increase the reset complete wait count to allow for 128 VFs to complete
reset.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Commit 4ae4916b5643 ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb
speeds") added the ability for the PF to report 2.5 and 5Gb speeds,
however, the iavf driver does not recognize those speeds as the values were
not added there. Add the proper enums and values so that iavf can properly
deal with those speeds.
Fixes: 4ae4916b5643 ("i40e: fix 'Unknown bps' in dmesg for 2.5Gb/5Gb speeds")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
adapter->link_speed has type enum virtchnl_link_speed but our comparisons
are against enum iavf_aq_link_speed. Though they are, currently, the same
values, change the comparison to the matching enum virtchnl_link_speed
since that may not always be the case.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Link speeds are communicated over virtchnl using an enum
virtchnl_link_speed. Currently, the highest link speed is 40Gbps which
leaves us unable to reflect some speeds that an ice VF is capable of.
This causes link speed to be misreported on the iavf driver.
Allow for communicating link speeds using Mbps so that the proper speed can
be reported for an ice VF. Moving away from the enum allows us to
communicate future speed changes without requiring a new enum to be added.
In order to support communicating link speeds over virtchnl in Mbps the
following functionality was added:
- Added u32 link_speed_mbps in the iavf_adapter structure.
- Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF
driver supports communicating link speeds in Mbps.
- Added the function iavf_get_vpe_link_status() to fill the
correct link_status in the event_data union based on the
ADV_LINK_SUPPORT(_a) macro.
- Added the function iavf_set_adapter_link_speed_from_vpe()
to determine whether or not to fill the u32 link_speed_mbps or
enum virtchnl_link_speed link_speed field in the iavf_adapter
structure based on the ADV_LINK_SUPPORT(_a) macro.
- Do not free vf_res in iavf_init_get_resources() as vf_res will be
accessed in iavf_get_link_ksettings(); memset to 0 instead. This
memory is subsequently freed in iavf_remove().
Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Sergey Nemov <sergey.nemov@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Kconfig select statements are now sorted alphanumerically
- first-level interrupts are now handled via a full irqchip driver
- CPU hotplug is fixed
- vDSO calls now use the common vDSO infrastructure
* tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: set the permission of vdso_data to read-only
riscv: use vDSO common flow to reduce the latency of the time-related functions
riscv: fix build warning of missing prototypes
RISC-V: Don't mark init section as non-executable
RISC-V: Force select RISCV_INTC for CONFIG_RISCV
RISC-V: Remove do_IRQ() function
clocksource/drivers/timer-riscv: Use per-CPU timer interrupt
irqchip: RISC-V per-HART local interrupt controller driver
RISC-V: Rename and move plic_find_hart_id() to arch directory
RISC-V: self-contained IPI handling routine
RISC-V: Sort select statements alphanumerically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"arm64 fixes that came in during the merge window.
There will probably be more to come, but it doesn't seem like it's
worth me sitting on these in the meantime.
- Fix SCS debug check to report max stack usage in bytes as advertised
- Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS
- Fix incorrect mask in HiSilicon L3C perf PMU driver
- Fix compat vDSO compilation under some toolchain configurations
- Fix false UBSAN warning from ACPI IORT parsing code
- Fix booting under bootloaders that ignore TEXT_OFFSET
- Annotate debug initcall function with '__init'"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: warn on incorrect placement of the kernel by the bootloader
arm64: acpi: fix UBSAN warning
arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO
drivers/perf: hisi: Fix wrong value for all counters enable
arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
arm64: debug: mark a function as __init to save some memory
scs: Report SCS usage in bytes rather than number of entries
|
|
We no longer support the mgmt device in the ionic driver,
so remove the device id and related code.
Fixes: b3f064e9746d ("ionic: add support for device id 0x1004")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- new controller driver for IPCC
- reorg the of_device data
- add support for ipq6018 platform
spreadtrum:
- new sprd controller driver
imx:
- implement suspend/resume PM support
misc:
- make pcc driver struct static
- fix return value in imx_mu_scu
- disable clock before bailout in imx probe
- remove duplicate error mssg in zynqmp probe
- fix header size in imx.scu
- check for null instead of is-err in zynqmp"
* tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom: Add ipq6018 apcs compatible
mailbox: qcom: Add clock driver name in apcs mailbox driver data
dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag
mailbox: imx: Add runtime PM callback to handle MU clocks
mailbox: imx: Add context save/restore for suspend/resume
MAINTAINERS: Add entry for Qualcomm IPCC driver
mailbox: Add support for Qualcomm IPCC
dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
mailbox: imx-mailbox: fix scu msg header size check
mailbox: sprd: Add Spreadtrum mailbox driver
dt-bindings: mailbox: Add the Spreadtrum mailbox documentation
mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe()
mailbox: imx: Disable the clock on devm_mbox_controller_register() failure
mailbox: imx: Fix return in imx_mu_scu_xlate()
mailbox: imx: Support runtime PM
mailbox: pcc: make pcc_mbox_driver static
|
|
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"One sun4i fix and a connector hotplug race The ast fix is for a
regression in 5.6, and one of the i915 ones fixes an oops reported by
dhowells.
core:
- fix race in connectors sending hotplug
i915:
- Avoid use after free in cmdparser
- Avoid NULL dereference when probing all display encoders
- Fixup to module parameter type
sun4i:
- clock divider fix
ast:
- 24/32 bpp mode setting fix"
* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fix missing break in switch statement for format->cpp[0] case 4
drm/sun4i: hdmi ddc clk: Fix size of m divider
drm/i915/display: Only query DP state of a DDI encoder
drm/i915/params: fix i915.reset module param type
drm/i915/gem: Mark the buffer pool as active for the cmdparser
drm/connector: notify userspace on hotplug after register complete
|
|
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"A number of fixes to the omap and nitrox drivers"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cavium/nitrox - Fix 'nitrox_get_first_device()' when ndevlist is fully iterated
crypto: omap-sham - add proper load balancing support for multicore
crypto: omap-aes - prevent unregistering algorithms twice
crypto: omap-sham - fix very small data size handling
crypto: omap-sham - huge buffer access fixes
crypto: omap-crypto - fix userspace copied buffer access
crypto: omap-sham - force kernel driver usage for sha algos
crypto: omap-aes - avoid spamming console with self tests
|
|
The Rockchip Video Decoder driver is expecting that the values in a
scaling list are in zig-zag order and applies the inverse scanning process
to get the values in matrix order.
Commit 0b0393d59eb4 ("media: uapi: h264: clarify expected
scaling_list_4x4/8x8 order") clarified that the values in the scaling list
should already be in matrix order.
Fix this by removing the reordering and change to use two memcpy.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
[hverkuil-cisco@xs4all.nl: rkvdec_scaling_matrix -> rkvdec_h264_scaling_list]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
