summaryrefslogtreecommitdiff
path: root/drivers/xen
AgeCommit message (Collapse)Author
2018-06-12treewide: kvmalloc() -> kvmalloc_array()Kees Cook
The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This patch replaces cases of: kvmalloc(a * b, gfp) with: kvmalloc_array(a * b, gfp) as well as handling cases of: kvmalloc(a * b * c, gfp) with: kvmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(char) * COUNT + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvmalloc + kvmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvmalloc(C1 * C2 * C3, ...) | kvmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvmalloc(sizeof(THING) * C2, ...) | kvmalloc(sizeof(TYPE) * C2, ...) | kvmalloc(C1 * C2 * C3, ...) | kvmalloc(C1 * C2, ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge tag 'for-linus-4.18-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "This contains some minor code cleanups (fixing return types of functions), some fixes for Linux running as Xen PVH guest, and adding of a new guest resource mapping feature for Xen tools" * tag 'for-linus-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/PVH: Make GDT selectors PVH-specific xen/PVH: Set up GS segment for stack canary xen/store: do not store local values in xen_start_info xen-netfront: fix xennet_start_xmit()'s return type xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE xen: Change return type to vm_fault_t
2018-05-18xen-swiotlb: fix the check condition for xen_swiotlb_free_coherentJoe Jin
When run raidconfig from Dom0 we found that the Xen DMA heap is reduced, but Dom Heap is increased by the same size. Tracing raidconfig we found that the related ioctl() in megaraid_sas will call dma_alloc_coherent() to apply memory. If the memory allocated by Dom0 is not in the DMA area, it will exchange memory with Xen to meet the requiment. Later drivers call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent() the check condition (dev_addr + size - 1 <= dma_mask) is always false, it prevents calling xen_destroy_contiguous_region() to return the memory to the Xen DMA heap. This issue introduced by commit 6810df88dcfc2 "xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.". Signed-off-by: Joe Jin <joe.jin@oracle.com> Tested-by: John Sobecki <john.sobecki@oracle.com> Reviewed-by: Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-05-17xen/store: do not store local values in xen_start_infoRoger Pau Monne
There's no need to store the xenstore page or event channel in xen_start_info if they are locally initialized. This also fixes PVH local xenstore initialization due to the lack of xen_start_info in that case. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-05-14xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCEPaul Durrant
My recent Xen patch series introduces a new HYPERVISOR_memory_op to support direct priv-mapping of certain guest resources (such as ioreq pages, used by emulators) by a tools domain, rather than having to access such resources via the guest P2M. This patch adds the necessary infrastructure to the privcmd driver and Xen MMU code to support direct resource mapping. NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now allow a PV tools domain to map guest pages either by GFN or MFN, thus the term 'mfn' has been swapped for 'pfn' in the lower layers of the remap code. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-05-14xen: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-04-20Merge tag 'for-linus-4.17-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - some fixes of kmalloc() flags - one fix of the xenbus driver - an update of the pv sound driver interface needed for a driver which will go through the sound tree * tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus_dev_frontend: Really return response string xen/sndif: Sync up with the canonical definition in Xen xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
2018-04-17xen: xenbus_dev_frontend: Really return response stringSimon Gaiser
xenbus_command_reply() did not actually copy the response string and leaked stack content instead. Fixes: 9a6161fe73bd ("xen: return xenstore command failures via response instead of rc") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_addJia-Ju Bai
pcistub_reg_add() is never called in atomic context. pcistub_reg_add() is only called by pcistub_quirk_add, which is only set in DRIVER_ATTR(). Despite never getting called from atomic context, pcistub_reg_add() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai
xen_pcibk_config_quirks_init xen_pcibk_config_quirks_init() is never called in atomic context. The call chains ending up at xen_pcibk_config_quirks_init() are: [1] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, xen_pcibk_config_quirks_init() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_allocJia-Ju Bai
pcistub_device_alloc() is never called in atomic context. The call chain ending up at pcistub_device_alloc() is: [1] pcistub_device_alloc() <- pcistub_seize() <- pcistub_probe() pcistub_probe() is only set as ".probe" in struct pci_driver. This function is not called in atomic context. Despite never getting called from atomic context, pcistub_device_alloc() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_deviceJia-Ju Bai
pcistub_init_device() is never called in atomic context. The call chain ending up at pcistub_init_device() is: [1] pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, pcistub_init_device() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probeJia-Ju Bai
pcistub_probe() is never called in atomic context. This function is only set as ".probe" in struct pci_driver. Despite never getting called from atomic context, pcistub_probe() calls kmalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-12Merge tag 'for-linus-4.17-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A few fixes of Xen related core code and drivers" * tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen xen/acpi: off by one in read_acpi_id() xen/acpi: upload _PSD info for non Dom0 CPUs too x86/xen: Delay get_cpu_cap until stack canary is established xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END xen: xenbus: Catch closing of non existent transactions xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
2018-03-30xen/acpi: off by one in read_acpi_id()Dan Carpenter
If acpi_id is == nr_acpi_bits, then we access one element beyond the end of the acpi_psd[] array or we set one bit beyond the end of the bit map when we do __set_bit(acpi_id, acpi_id_present); Fixes: 59a568029181 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen/acpi: upload _PSD info for non Dom0 CPUs tooJoao Martins
All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and changing only the acpi_id. For processors which P-state coordination type is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information (_PSD), because Xen will ignore any cpufreq domains created for past CPUs. Albeit for platforms which expose coordination types as SW_ANY or SW_ALL, this will have some unintended side effects. Effectively, it will look at the P-state domain existence and *if it already exists* it will skip the acpi-cpufreq initialization and thus inherit the policy from the first CPU in the cpufreq domain. This will finally lead to the original cpu not changing target freq to P0 other than the first in the domain. Which will make turbo boost not getting enabled (e.g. for 'performance' governor) for all cpus. This patch fixes that, by also evaluating _PSD when we enumerate all ACPI processors and thus always uploading the correct info to Xen. We export acpi_processor_get_psd() for that this purpose, but change signature to not assume an existent of acpi_processor given that ACPI isn't creating an acpi_processor for non-dom0 CPUs. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_ENDSimon Gaiser
By guaranteeing that the argument of XS_TRANSACTION_END is valid we can assume that the transaction has been closed when we get an XS_ERROR response from xenstore (Note that we already verify that it's a valid transaction id). Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus: Catch closing of non existent transactionsSimon Gaiser
Users of the xenbus functions should never close a non existent transaction (for example by trying to closing the same transaction twice) but better catch it in xs_request_exit() than to corrupt the reference counter. Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handlingSimon Gaiser
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") made a subtle change to the semantic of xenbus_dev_request_and_reply() and xenbus_transaction_end(). Before on an error response to XS_TRANSACTION_END xenbus_dev_request_and_reply() would not decrement the active transaction counter. But xenbus_transaction_end() has always counted the transaction as finished regardless of the response. The new behavior is that xenbus_dev_request_and_reply() and xenbus_transaction_end() will always count the transaction as finished regardless the response code (handled in xs_request_exit()). But xenbus_dev_frontend tries to end a transaction on closing of the device if the XS_TRANSACTION_END failed before. Trying to close the transaction twice corrupts the reference count. So fix this by also considering a transaction closed if we have sent XS_TRANSACTION_END once regardless of the return code. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-20x86/dma: Remove dma_alloc_coherent_mask()Christoph Hellwig
These days all devices (including the ISA fallback device) have a coherent DMA mask set, so remove the workaround. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-3-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09Merge tag 'for-linus-4.16a-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Just one fix for the correct error handling after a failed device_register()" * tag 'for-linus-4.16a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus: use put_device() instead of kfree()
2018-03-08xen: xenbus: use put_device() instead of kfree()Arvind Yadav
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-03-02Merge tag 'for-linus-4.16a-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Five minor fixes for Xen-specific drivers" * tag 'for-linus-4.16a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: 64-bit align flags x86/xen: add tty0 and hvc0 as preferred consoles for dom0 xen-netfront: Fix hang on device removal xen/pirq: fix error path cleanup when binding MSIs xen/pvcalls: fix null pointer dereference on map->sock
2018-03-01pvcalls-front: 64-bit align flagsStefano Stabellini
We are using test_and_* operations on the status and flag fields of struct sock_mapping. However, these functions require the operand to be 64-bit aligned on arm64. Currently, only status is 64-bit aligned. Make status and flags explicitly 64-bit aligned. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-28xen/pirq: fix error path cleanup when binding MSIsRoger Pau Monne
Current cleanup in the error path of xen_bind_pirq_msi_to_irq is wrong. First of all there's an off-by-one in the cleanup loop, which can lead to unbinding wrong IRQs. Secondly IRQs not bound won't be freed, thus leaking IRQ numbers. Note that there's no need to differentiate between bound and unbound IRQs when freeing them, __unbind_from_irq will deal with both of them correctly. Fixes: 4892c9b4ada9f9 ("xen: add support for MSI message groups") Reported-by: Hooman Mirhadi <mirhadih@amazon.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Amit Shah <aams@amazon.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-26xen/pvcalls: fix null pointer dereference on map->sockColin Ian King
Currently if map is null then a potential null pointer deference occurs when calling sock_release on map->sock. I believe the actual intention was to call sock_release on sock instead. Fix this. Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-21mm, swap, frontswap: fix THP swap if frontswap enabledHuang Ying
It was reported by Sergey Senozhatsky that if THP (Transparent Huge Page) and frontswap (via zswap) are both enabled, when memory goes low so that swap is triggered, segfault and memory corruption will occur in random user space applications as follow, kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000] #0 0x00007fc08889ae0d _int_malloc (libc.so.6) #1 0x00007fc08889c2f3 malloc (libc.so.6) #2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt) #3 0x0000560e6005e75c n/a (urxvt) #4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt) #5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt) #6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt) #7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt) #8 0x0000560e6005cb55 ev_run (urxvt) #9 0x0000560e6003b9b9 main (urxvt) #10 0x00007fc08883af4a __libc_start_main (libc.so.6) #11 0x0000560e6003f9da _start (urxvt) After bisection, it was found the first bad commit is bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out"). The root cause is as follows: When the pages are written to swap device during swapping out in swap_writepage(), zswap (fontswap) is tried to compress the pages to improve performance. But zswap (frontswap) will treat THP as a normal page, so only the head page is saved. After swapping in, tail pages will not be restored to their original contents, causing memory corruption in the applications. This is fixed by refusing to save page in the frontswap store functions if the page is a THP. So that the THP will be swapped out to swap device. Another choice is to split THP if frontswap is enabled. But it is found that the frontswap enabling isn't flexible. For example, if CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if zswap itself isn't enabled. Frontswap has multiple backends, to make it easy for one backend to enable THP support, the THP checking is put in backend frontswap store functions instead of the general interfaces. Link: http://lkml.kernel.org/r/20180209084947.22749-1-ying.huang@intel.com Fixes: bd4c82c22c367e068 ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> [put THP checking in backend] Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Shaohua Li <shli@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Shakeel Butt <shakeelb@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> [4.14] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-17pvcalls-front: wait for other operations to return when release passive socketsStefano Stabellini
Passive sockets can have ongoing operations on them, specifically, we have two wait_event_interruptable calls in pvcalls_front_accept. Add two wake_up calls in pvcalls_front_release, then wait for the potential waiters to return and release the sock_mapping refcount. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-17pvcalls-front: introduce a per sock_mapping refcountStefano Stabellini
Introduce a per sock_mapping refcount, in addition to the existing global refcount. Thanks to the sock_mapping refcount, we can safely wait for it to be 1 in pvcalls_front_release before freeing an active socket, instead of waiting for the global refcount to be 1. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-17xenbus: track caller request idJoao Martins
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11Merge branch 'work.poll2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
2018-02-09Merge tag 'for-linus-4.16-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Only five small fixes for issues when running under Xen" * tag 'for-linus-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guests pvcalls-back: do not return error on inet_accept EAGAIN xen-netfront: Fix race between device setup and open xen/grant-table: Use put_page instead of free_page x86/xen: init %gs very early to avoid page faults with stack protector
2018-02-06pvcalls-back: do not return error on inet_accept EAGAINStefano Stabellini
When the client sends a regular blocking accept request, the backend is expected to return only when the accept is completed, simulating a blocking behavior, or return an error. Specifically, on EAGAIN from inet_accept, the backend shouldn't return "EAGAIN" to the client. Instead, it should simply continue the wait. Otherwise, the client will send another accept request, which will cause another EAGAIN to be sent back, which is a waste of resources and not conforming to the expected behavior. Change the behavior by turning the "goto error" into a return. Signed-off-by: Stefano Stabellini <stefano@aporeto.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-06xen/grant-table: Use put_page instead of free_pageRoss Lagerwall
The page given to gnttab_end_foreign_access() to free could be a compound page so use put_page() instead of free_page() since it can handle both compound and single pages correctly. This bug was discovered when migrating a Xen VM with several VIFs and CONFIG_DEBUG_VM enabled. It hits a BUG usually after fewer than 10 iterations. All netfront devices disconnect from the backend during a suspend/resume and this will call gnttab_end_foreign_access() if a netfront queue has an outstanding skb. The mismatch between calling get_page() and free_page() on a compound page causes a reference counting error which is detected when DEBUG_VM is enabled. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-01xen: fix poll misannotationAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-12Merge tag 'for-linus-4.15-rc8-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two build fixes for clang and two fixes for rather unlikely situations in the Xen gntdev driver" * tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: Fix partial gntdev_mmap() cleanup xen/gntdev: Fix off-by-one error when unmapping with holes x86: xen: remove the use of VLAIS x86/xen/time: fix section mismatch for xen_init_time_ops()
2018-01-10dma-mapping: move swiotlb arch helpers to a new headerChristoph Hellwig
phys_to_dma, dma_to_phys and dma_capable are helpers published by architecture code for use of swiotlb and xen-swiotlb only. Drivers are not supposed to use these directly, but use the DMA API instead. Move these to a new asm/dma-direct.h helper, included by a linux/dma-direct.h wrapper that provides the default linear mapping unless the architecture wants to override it. In the MIPS case the existing dma-coherent.h is reused for now as untangling it will take a bit of work. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2018-01-10xen/gntdev: Fix partial gntdev_mmap() cleanupRoss Lagerwall
When cleaning up after a partially successful gntdev_mmap(), unmap the successfully mapped grant pages otherwise Xen will kill the domain if in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will kill the process and emit "BUG: Bad page map in process" if Xen is in release mode. This is only needed when use_ptemod is true because gntdev_put_map() will unmap grant pages itself when use_ptemod is false. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-10xen/gntdev: Fix off-by-one error when unmapping with holesRoss Lagerwall
If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-05Merge tag 'for-linus-4.15-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "One minor fix adjusting the kmalloc flags in the new pvcalls driver added in rc1" * tag 'for-linus-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: use GFP_ATOMIC under spin lock
2018-01-02xen/pvcalls: use GFP_ATOMIC under spin lockWei Yongjun
A spin lock is taken here so we should use GFP_ATOMIC. Fixes: 9774c6cca266 ("xen/pvcalls: implement accept command") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-12-22Merge tag 'for-linus-4.15-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains two fixes for running under Xen: - a fix avoiding resource conflicts between adding mmio areas and memory hotplug - a fix setting NX bits in page table entries copied from Xen when running a PV guest" * tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Mark unallocated host memory as UNUSABLE x86-64/Xen: eliminate W+X mappings
2017-12-20xen/balloon: Mark unallocated host memory as UNUSABLEBoris Ostrovsky
Commit f5775e0b6116 ("x86/xen: discard RAM regions above the maximum reservation") left host memory not assigned to dom0 as available for memory hotplug. Unfortunately this also meant that those regions could be used by others. Specifically, commit fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") may try to map those addresses as MMIO. To prevent this mark unallocated host memory as E820_TYPE_UNUSABLE (thus effectively reverting f5775e0b6116) and keep track of that region as a hostmem resource that can be used for the hotplug. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-12-15Merge tag 'for-linus-4.15-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two minor fixes for running as Xen dom0: - when built as 32 bit kernel on large machines the Xen LAPIC emulation should report a rather modern LAPIC in order to support enough APIC-Ids - The Xen LAPIC emulation is needed for dom0 only, so build it only for kernels supporting to run as Xen dom0" * tag 'for-linus-4.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: XEN_ACPI_PROCESSOR is Dom0-only x86/Xen: don't report ancient LAPIC version
2017-12-12xen: XEN_ACPI_PROCESSOR is Dom0-onlyJan Beulich
Add a respective dependency. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 16:07:47 +0000