| Age | Commit message (Collapse) | Author |
|---|
|
Instead of fiddling with masking the event channels during suspend
and resume handling let do the irq subsystem do its job. It will do
the mask and unmask operations as needed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Remove unnecessary static on local variables last_frontswap_pages and
tgt_frontswap_pages. Such variables are initialized before being used,
on every execution path throughout the function. The statics have no
benefit and, removing them reduce the code size.
This issue was detected using Coccinelle and the following semantic patch:
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
You can see a significant difference in the code size after executing
the size command, before and after the code change:
before:
text data bss dec hex filename
5633 3452 384 9469 24fd drivers/xen/xen-selfballoon.o
after:
text data bss dec hex filename
5576 3308 256 9140 23b4 drivers/xen/xen-selfballoon.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
On systems that are not booted as a Xen domain, the xenfs driver prints
the following message during boot.
[ 3.460595] xenfs: not registering filesystem on non-xen platform
As the user chose not to boot a Xen domain, this message does not
provide useful information. Drop this message.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.
Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.
Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.
In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
log a message when we enter this situation:
1) we already allocated the max number of available grants from hypervisor
and
2) we still need more (but the request fails because of 1)).
Sometimes the lack of grants causes IO hangs in xen_blkfront devices.
Adding this log would help debuging.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"It's been usually busy for summer, with most of the efforts centered
around TCMU developments and various target-core + fabric driver bug
fixing activities. Not particularly large in terms of LoC, but lots of
smaller patches from many different folks.
The highlights include:
- ibmvscsis logical partition manager support (Michael Cyr + Bryant
Ly)
- Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch +
nab)
- Add support for TMR percpu LUN reference counting (nab)
- Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown
(Bart)
- Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi)
- Fix TMCU module removal (Xiubo Li)
- Fix iser-target OOPs during login failure (Andrea Righi + Sagi)
- Breakup target-core free_device backend driver callback (mnc)
- Perform TCMU add/delete/reconfig synchronously (mnc)
- Fix TCMU multiple UIO open/close sequences (mnc)
- Fix TCMU CHECK_CONDITION sense handling (mnc)
- Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab)
- Introduce TYPE_ZBC support in PSCSI (Damien Le Moal)
- Fix possible TCMU memory leak + OOPs when recalculating cmd base
size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc)
- Add login_keys_workaround attribute for non RFC initiators (Robert
LeBlanc + Arun Easi + nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits)
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT"
tcmu: clean up the code and with one small fix
tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size
target: export lio pgr/alua support as device attr
target: Fix return sense reason in target_scsi3_emulate_pr_out
target: Fix cmd size for PR-OUT in passthrough_parse_cdb
tcmu: Fix dev_config_store
target: pscsi: Introduce TYPE_ZBC support
target: Use macro for WRITE_VERIFY_32 operation codes
target: fix SAM_STAT_BUSY/TASK_SET_FULL handling
target: remove transport_complete
pscsi: finish cmd processing from pscsi_req_done
tcmu: fix sense handling during completion
target: add helper to copy sense to se_cmd buffer
target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE
target: make device_mutex and device_list static
tcmu: Fix flushing cmd entry dcache page
tcmu: fix multiple uio open/close sequences
tcmu: drop configured check in destroy
...
|
|
Target drivers must guarantee that struct se_cmd and struct se_tmr_req
exist as long as target_tmr_work() is in progress. Since the last
access by the LIO core is a call to .check_stop_free() and since the
Xen scsiback .check_stop_free() drops a reference to the TMF, it is
already guaranteed that the struct se_cmd that corresponds to the TMF
exists as long as target_tmr_work() is in progress. Hence change the
second argument of transport_generic_free_cmd() from 1 into 0.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: David Disseldorp <ddiss@suse.de>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
This patch simplifies the implementation of the scsiback driver
but does not change its behavior.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: David Disseldorp <ddiss@suse.de>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
scsiback_release_cmd() must not dereference se_cmd->se_tmr_req
because that memory is freed by target_free_cmd_mem() before
scsiback_release_cmd() is called. Fix this use-after-free by
inlining struct scsiback_tmr into struct vscsibk_pend.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: David Disseldorp <ddiss@suse.de>
Cc: xen-devel@lists.xenproject.org
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Other than fixes and cleanups it contains:
- support > 32 VCPUs at domain restore
- support for new sysfs nodes related to Xen
- some performance tuning for Linux running as Xen guest"
* tag 'for-linus-4.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: allow userspace access during hypercalls
x86: xen: remove unnecessary variable in xen_foreach_remap_area()
xen: allocate page for shared info page from low memory
xen: avoid deadlock in xenbus driver
xen: add sysfs node for hypervisor build id
xen: sync include/xen/interface/version.h
xen: add sysfs node for guest type
doc,xen: document hypervisor sysfs nodes for xen
xen/vcpu: Handle xen_vcpu_setup() failure at boot
xen/vcpu: Handle xen_vcpu_setup() failure in hotplug
xen/pv: Fix OOPS on restore for a PV, !SMP domain
xen/pvh*: Support > 32 VCPUs at domain restore
xen/vcpu: Simplify xen_vcpu related code
xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU
xen: avoid type warning in xchg_xen_ulong
xen: fix HYPERVISOR_dm_op() prototype
xen: don't print error message in case of missing Xenstore entry
arm/xen: Adjust one function call together with a variable assignment
arm/xen: Delete an error message for a failed memory allocation in __set_phys_to_machine_multi()
arm/xen: Improve a size determination in __set_phys_to_machine_multi()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Thomas Gleixner:
"The RAS updates for the 4.13 merge window:
- Cleanup of the MCE injection facility (Borsilav Petkov)
- Rework of the AMD/SMCA handling (Yazen Ghannam)
- Enhancements for ACPI/APEI to handle new notitication types (Shiju
Jose)
- atomic_t to refcount_t conversion (Elena Reshetova)
- A few fixes and enhancements all over the place"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Check the correct variable in the debugfs error handling
x86/mce: Always save severity in machine_check_poll()
x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise
x86/mce: Update bootlog description to reflect behavior on AMD
x86/mce: Don't disable MCA banks when offlining a CPU on AMD
x86/mce/mce-inject: Preset the MCE injection struct
x86/mce: Clean up include files
x86/mce: Get rid of register_mce_write_callback()
x86/mce: Merge mce_amd_inj into mce-inject
x86/mce/AMD: Use saved threshold block info in interrupt handler
x86/mce/AMD: Use msr_stat when clearing MCA_STATUS
x86/mce/AMD: Carve out SMCA bank configuration
x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers
x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t
RAS: Make local function parse_ras_param() static
ACPI/APEI: Handle GSIV and GPIO notification types
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- Expand the generic infrastructure handling the irq migration on CPU
hotplug and convert X86 over to it. (Thomas Gleixner)
Aside of consolidating code this is a preparatory change for:
- Finalizing the affinity management for multi-queue devices. The
main change here is to shut down interrupts which are affine to a
outgoing CPU and reenabling them when the CPU comes online again.
That avoids moving interrupts pointlessly around and breaking and
reestablishing affinities for no value. (Christoph Hellwig)
Note: This contains also the BLOCK-MQ and NVME changes which depend
on the rework of the irq core infrastructure. Jens acked them and
agreed that they should go with the irq changes.
- Consolidation of irq domain code (Marc Zyngier)
- State tracking consolidation in the core code (Jeffy Chen)
- Add debug infrastructure for hierarchical irq domains (Thomas
Gleixner)
- Infrastructure enhancement for managing generic interrupt chips via
devmem (Bartosz Golaszewski)
- Constification work all over the place (Tobias Klauser)
- Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)
- The usual set of fixes, updates and enhancements all over the
place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
irqchip/or1k-pic: Fix interrupt acknowledgement
irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
nvme: Allocate queues for all possible CPUs
blk-mq: Create hctx for each present CPU
blk-mq: Include all present CPUs in the default queue mapping
genirq: Avoid unnecessary low level irq function calls
genirq: Set irq masked state when initializing irq_desc
genirq/timings: Add infrastructure for estimating the next interrupt arrival time
genirq/timings: Add infrastructure to track the interrupt timings
genirq/debugfs: Remove pointless NULL pointer check
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
irqchip/gic-v3-its: Add ACPI NUMA node mapping
irqchip/gic-v3-its-platform-msi: Make of_device_ids const
irqchip/gic-v3-its: Make of_device_ids const
irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
genirq/irqdomain: Remove auto-recursive hierarchy support
irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
|
|
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
|
|
This just duplicates the generic implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There has been a report about a deadlock in the xenbus driver:
[ 247.979498] ======================================================
[ 247.985688] WARNING: possible circular locking dependency detected
[ 247.991882] 4.12.0-rc4-00022-gc4b25c0 #575 Not tainted
[ 247.997040] ------------------------------------------------------
[ 248.003232] xenbus/91 is trying to acquire lock:
[ 248.007875] (&u->msgbuffer_mutex){+.+.+.}, at: [<ffff00000863e904>]
xenbus_dev_queue_reply+0x3c/0x230
[ 248.017163]
[ 248.017163] but task is already holding lock:
[ 248.023096] (xb_write_mutex){+.+...}, at: [<ffff00000863a940>]
xenbus_thread+0x5f0/0x798
[ 248.031267]
[ 248.031267] which lock already depends on the new lock.
[ 248.031267]
[ 248.039615]
[ 248.039615] the existing dependency chain (in reverse order) is:
[ 248.047176]
[ 248.047176] -> #1 (xb_write_mutex){+.+...}:
[ 248.052943] __lock_acquire+0x1728/0x1778
[ 248.057498] lock_acquire+0xc4/0x288
[ 248.061630] __mutex_lock+0x84/0x868
[ 248.065755] mutex_lock_nested+0x3c/0x50
[ 248.070227] xs_send+0x164/0x1f8
[ 248.074015] xenbus_dev_request_and_reply+0x6c/0x88
[ 248.079427] xenbus_file_write+0x260/0x420
[ 248.084073] __vfs_write+0x48/0x138
[ 248.088113] vfs_write+0xa8/0x1b8
[ 248.091983] SyS_write+0x54/0xb0
[ 248.095768] el0_svc_naked+0x24/0x28
[ 248.099897]
[ 248.099897] -> #0 (&u->msgbuffer_mutex){+.+.+.}:
[ 248.106088] print_circular_bug+0x80/0x2e0
[ 248.110730] __lock_acquire+0x1768/0x1778
[ 248.115288] lock_acquire+0xc4/0x288
[ 248.119417] __mutex_lock+0x84/0x868
[ 248.123545] mutex_lock_nested+0x3c/0x50
[ 248.128016] xenbus_dev_queue_reply+0x3c/0x230
[ 248.133005] xenbus_thread+0x788/0x798
[ 248.137306] kthread+0x110/0x140
[ 248.141087] ret_from_fork+0x10/0x40
It is rather easy to avoid by dropping xb_write_mutex before calling
xenbus_dev_queue_reply().
Fixes: fd8aa9095a95c02dcc35540a263267c29b8fda9d ("xen: optimize xenbus
driver for multiple concurrent xenstore accesses").
Cc: <stable@vger.kernel.org> # 4.11
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Update the effective affinity mask when an interrupt was successfully
targeted to a CPU.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235446.799944725@linutronix.de
|
|
When running under Xen as dom0, /dev/mcelog is being provided by Xen
instead of the normal mcelog character device of the MCE core. Convert
an error message being issued by the MCE core in this case to an
informative message that Xen has registered the device.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170614084059.19294-1-jgross@suse.com
|
|
Conflicts:
kernel/sched/Makefile
Pick up the waitqueue related renames - it didn't get much feedback,
so it appears to be uncontroversial. Famous last words? ;-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
ARM and x86 had duplicated versions of the dma_ops structure, the
only difference is that x86 hasn't wired up the set_dma_mask,
mmap, and get_sgtable ops yet. On x86 all of them are identical
to the generic version, so they aren't needed but harmless.
All the symbols used only for xen_swiotlb_dma_ops can now be marked
static as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
For support of Xen hypervisor live patching the hypervisor build id is
needed. Add a node /sys/hypervisor/properties/buildid containing the
information.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Currently there is no reliable user interface inside a Xen guest to
determine its type (e.g. HVM, PV or PVH). Instead of letting user mode
try to determine this by various rather hacky mechanisms (parsing of
boot messages before they are gone, trying to make use of known subtle
differences in behavior of some instructions), add a sysfs node
/sys/hypervisor/guest_type to explicitly deliver this information as
it is known to the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
A HVM domian booting generates around 200K (evtchn:qemu-dm xen-dyn)
interrupts,in a short period of time. All these evtchn:qemu-dm are bound
to VCPU 0, until irqbalance sees these IRQ and moves it to a different VCPU.
In one configuration, irqbalance runs every 10 seconds, which means
irqbalance doesn't get to see these burst of interrupts and doesn't
re-balance interrupts most of the time, making all evtchn:qemu-dm to be
processed by VCPU0. This cause VCPU0 to spend most of time processing
hardirq and very little time on softirq. Moreover, if dom0 kernel PREEMPTION
is disabled, VCPU0 never runs watchdog (process context), triggering a
softlockup detection code to panic.
Binding evtchn:qemu-dm to next online VCPU, will spread hardirq
processing evenly across different CPU. Later, irqbalance will try to balance
evtchn:qemu-dm, if required.
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for Xen on ARM when dealing with 64kB page size of a guest"
* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: Support correctly 64KB page granularity when mapping memory
|
|
Commit 5995a68 "xen/privcmd: Add support for Linux 64KB page granularity" did
not go far enough to support 64KB in mmap_batch_fn.
The variable 'nr' is the number of 4KB chunk to map. However, when Linux
is using 64KB page granularity the array of pages (vma->vm_private_data)
contain one page per 64KB. Fix it by incrementing st->index correctly.
Furthermore, st->va is not correctly incremented as PAGE_SIZE !=
XEN_PAGE_SIZE.
Fixes: 5995a68 ("xen/privcmd: Add support for Linux 64KB page granularity")
CC: stable@vger.kernel.org
Reported-by: Feng Kan <fkan@apm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When registering for the Xenstore watch of the node control/sysrq the
handler will be called at once. Don't issue an error message if the
Xenstore node isn't there, as it will be created only when an event
is being triggered.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers. More to come..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
might_sleep() debugging and smp_processor_id() debugging should be active
right after the scheduler starts working. The init task can invoke
smp_processor_id() from preemptible context as it is pinned on the boot cpu
until sched_smp_init() removes the pinning and lets it schedule on all non
isolated cpus.
Add a new state which allows to enable those checks earlier and add it to
the xen do_poweroff() function.
No functional change.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184736.196214622@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted bits and pieces from various people. No common topic in this
pile, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/affs: add rename exchange
fs/affs: add rename2 to prepare multiple methods
Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()
fs: don't set *REFERENCED on single use objects
fs: compat: Remove warning from COMPATIBLE_IOCTL
remove pointless extern of atime_need_update_rcu()
fs: completely ignore unknown open flags
fs: add a VALID_OPEN_FLAGS
fs: remove _submit_bh()
fs: constify tree_descr arrays passed to simple_fill_super()
fs: drop duplicate header percpu-rwsem.h
fs/affs: bugfix: Write files greater than page size on OFS
fs/affs: bugfix: enable writes on OFS disks
fs/affs: remove node generation check
fs/affs: import amigaffs.h
fs/affs: bugfix: make symbolic links work again
|
|
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When rebooting DOM0 with ACPI on ARM64, the kernel is crashing with the stack
trace [1].
This is happening because when EFI runtimes are enabled, the reset code
(see machine_restart) will first try to use EFI restart method.
However, the EFI restart code is expecting the reset_system callback to
be always set. This is not the case for Xen and will lead to crash.
The EFI restart helper is used in multiple places and some of them don't
not have fallback (see machine_power_off). So implement reset_system
callback as a call to xen_reboot when using EFI Xen.
[ 36.999270] reboot: Restarting system
[ 37.002921] Internal error: Attempting to execute userspace memory: 86000004 [#1] PREEMPT SMP
[ 37.011460] Modules linked in:
[ 37.014598] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.11.0-rc1-00003-g1e248b60a39b-dirty #506
[ 37.023903] Hardware name: (null) (DT)
[ 37.027734] task: ffff800902068000 task.stack: ffff800902064000
[ 37.033739] PC is at 0x0
[ 37.036359] LR is at efi_reboot+0x94/0xd0
[ 37.040438] pc : [<0000000000000000>] lr : [<ffff00000880f2c4>] pstate: 404001c5
[ 37.047920] sp : ffff800902067cf0
[ 37.051314] x29: ffff800902067cf0 x28: ffff800902068000
[ 37.056709] x27: ffff000008992000 x26: 000000000000008e
[ 37.062104] x25: 0000000000000123 x24: 0000000000000015
[ 37.067499] x23: 0000000000000000 x22: ffff000008e6e250
[ 37.072894] x21: ffff000008e6e000 x20: 0000000000000000
[ 37.078289] x19: ffff000008e5d4c8 x18: 0000000000000010
[ 37.083684] x17: 0000ffffa7c27470 x16: 00000000deadbeef
[ 37.089079] x15: 0000000000000006 x14: ffff000088f42bef
[ 37.094474] x13: ffff000008f42bfd x12: ffff000008e706c0
[ 37.099870] x11: ffff000008e70000 x10: 0000000005f5e0ff
[ 37.105265] x9 : ffff800902067a50 x8 : 6974726174736552
[ 37.110660] x7 : ffff000008cc6fb8 x6 : ffff000008cc6fb0
[ 37.116055] x5 : ffff000008c97dd8 x4 : 0000000000000000
[ 37.121453] x3 : 0000000000000000 x2 : 0000000000000000
[ 37.126845] x1 : 0000000000000000 x0 : 0000000000000000
[ 37.132239]
[ 37.133808] Process systemd-shutdow (pid: 1, stack limit = 0xffff800902064000)
[ 37.141118] Stack: (0xffff800902067cf0 to 0xffff800902068000)
[ 37.146949] 7ce0: ffff800902067d40 ffff000008085334
[ 37.154869] 7d00: 0000000000000000 ffff000008f3b000 ffff800902067d40 ffff0000080852e0
[ 37.162787] 7d20: ffff000008cc6fb0 ffff000008cc6fb8 ffff000008c7f580 ffff000008c97dd8
[ 37.170706] 7d40: ffff800902067d60 ffff0000080e2c2c 0000000000000000 0000000001234567
[ 37.178624] 7d60: ffff800902067d80 ffff0000080e2ee8 0000000000000000 ffff0000080e2df4
[ 37.186544] 7d80: 0000000000000000 ffff0000080830f0 0000000000000000 00008008ff1c1000
[ 37.194462] 7da0: ffffffffffffffff 0000ffffa7c4b1cc 0000000000000000 0000000000000024
[ 37.202380] 7dc0: ffff800902067dd0 0000000000000005 0000fffff24743c8 0000000000000004
[ 37.210299] 7de0: 0000fffff2475f03 0000000000000010 0000fffff2474418 0000000000000005
[ 37.218218] 7e00: 0000fffff2474578 000000000000000a 0000aaaad6b722c0 0000000000000001
[ 37.226136] 7e20: 0000000000000123 0000000000000038 ffff800902067e50 ffff0000081e7294
[ 37.234055] 7e40: ffff800902067e60 ffff0000081e935c ffff800902067e60 ffff0000081e9388
[ 37.241973] 7e60: ffff800902067eb0 ffff0000081ea388 0000000000000000 00008008ff1c1000
[ 37.249892] 7e80: ffffffffffffffff 0000ffffa7c4a79c 0000000000000000 ffff000000020000
[ 37.257810] 7ea0: 0000010000000004 0000000000000000 0000000000000000 ffff0000080830f0
[ 37.265729] 7ec0: fffffffffee1dead 0000000028121969 0000000001234567 0000000000000000
[ 37.273651] 7ee0: ffffffffffffffff 8080000000800000 0000800000008080 feffa9a9d4ff2d66
[ 37.281567] 7f00: 000000000000008e feffa9a9d5b60e0f 7f7fffffffff7f7f 0101010101010101
[ 37.289485] 7f20: 0000000000000010 0000000000000008 000000000000003a 0000ffffa7ccf588
[ 37.297404] 7f40: 0000aaaad6b87d00 0000ffffa7c4b1b0 0000fffff2474be0 0000aaaad6b88000
[ 37.305326] 7f60: 0000fffff2474fb0 0000000001234567 0000000000000000 0000000000000000
[ 37.313240] 7f80: 0000000000000000 0000000000000001 0000aaaad6b70d4d 0000000000000000
[ 37.321159] 7fa0: 0000000000000001 0000fffff2474ea0 0000aaaad6b5e2e0 0000fffff2474e80
[ 37.329078] 7fc0: 0000ffffa7c4b1cc 0000000000000000 fffffffffee1dead 000000000000008e
[ 37.336997] 7fe0: 0000000000000000 0000000000000000 9ce839cffee77eab fafdbf9f7ed57f2f
[ 37.344911] Call trace:
[ 37.347437] Exception stack(0xffff800902067b20 to 0xffff800902067c50)
[ 37.353970] 7b20: ffff000008e5d4c8 0001000000000000 0000000080f82000 0000000000000000
[ 37.361883] 7b40: ffff800902067b60 ffff000008e17000 ffff000008f44c68 00000001081081b4
[ 37.369802] 7b60: ffff800902067bf0 ffff000008108478 0000000000000000 ffff000008c235b0
[ 37.377721] 7b80: ffff800902067ce0 0000000000000000 0000000000000000 0000000000000015
[ 37.385643] 7ba0: 0000000000000123 000000000000008e ffff000008992000 ffff800902068000
[ 37.393557] 7bc0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 37.401477] 7be0: 0000000000000000 ffff000008c97dd8 ffff000008cc6fb0 ffff000008cc6fb8
[ 37.409396] 7c00: 6974726174736552 ffff800902067a50 0000000005f5e0ff ffff000008e70000
[ 37.417318] 7c20: ffff000008e706c0 ffff000008f42bfd ffff000088f42bef 0000000000000006
[ 37.425234] 7c40: 00000000deadbeef 0000ffffa7c27470
[ 37.430190] [< (null)>] (null)
[ 37.434982] [<ffff000008085334>] machine_restart+0x6c/0x70
[ 37.440550] [<ffff0000080e2c2c>] kernel_restart+0x6c/0x78
[ 37.446030] [<ffff0000080e2ee8>] SyS_reboot+0x130/0x228
[ 37.451337] [<ffff0000080830f0>] el0_svc_naked+0x24/0x28
[ 37.456737] Code: bad PC value
[ 37.459891] ---[ end trace 76e2fc17e050aecd ]---
Signed-off-by: Julien Grall <julien.grall@arm.com>
--
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
The x86 code has theoritically a similar issue, altought EFI does not
seem to be the preferred method. I have only built test it on x86.
This should also probably be fixed in stable tree.
Changes in v2:
- Implement xen_efi_reset_system using xen_reboot
- Move xen_efi_reset_system in drivers/xen/efi.c
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741)
established that commit 72a9b186292d ("xen: Remove event channel
notification through Xen PCI platform device") (and thus commit
da72ff5bfcb0 ("partially revert "xen: Remove event channel
notification through Xen PCI platform device"")) are unnecessary and,
in fact, prevent HVM guests from booting on Xen releases prior to 4.0
Therefore we revert both of those commits.
The summary of that discussion is below:
Here is the brief summary of the current situation:
Before the offending commit (72a9b186292):
1) INTx does not work because of the reset_watches path.
2) The reset_watches path is only taken if you have Xen > 4.0
3) The Linux Kernel by default will use vector inject if the hypervisor
support. So even INTx does not work no body running the kernel with
Xen > 4.0 would notice. Unless he explicitly disabled this feature
either in the kernel or in Xen (and this can only be disabled by
modifying the code, not user-supported way to do it).
After the offending commit (+ partial revert):
1) INTx is no longer support for HVM (only for PV guests).
2) Any HVM guest The kernel will not boot on Xen < 4.0 which does
not have vector injection support. Since the only other mode
supported is INTx which.
So based on this summary, I think before commit (72a9b186292) we were
in much better position from a user point of view.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Now that __generic_dma_ops is a xen specific function, rename it to
xen_get_dma_ops. Change all the call sites appropriately.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: linux@armlinux.org.uk
CC: catalin.marinas@arm.com
CC: will.deacon@arm.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Julien Grall <julien.grall@arm.com>
|
|
Balloon driver uses several PV-only concepts (xen_start_info,
xen_extra_mem,..) and it seems the simpliest solution to make HVM-only
build happy is to decorate these parts with #ifdefs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
simple_fill_super() is passed an array of tree_descr structures which
describe the files to create in the filesystem's root directory. Since
these arrays are never modified intentionally, they should be 'const' so
that they are placed in .rodata and benefit from memory protection.
This patch updates the function signature and all users, and also
constifies tree_descr.name.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After allocation the item is being placed on the list right away.
Consequently it needs to be taken off the list before freeing in the
case xenbus_dev_request_and_reply() failed, as in that case the
callback (xenbus_dev_queue_reply()) is not being called (and if it
was called, it should do both).
Fixes: 5584ea250ae44f929feb4c7bd3877d1c5edbf813
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
This was broken in commit cd979883b9ed ("xen/acpi-processor:
fix enabling interrupts on syscore_resume"). do_suspend (from
xen/manage.c) and thus xen_resume_notifier never get called on
the initial-domain at resume (it is if running as guest.)
The rationale for the breaking change was that upload_pm_data()
potentially does blocking work in syscore_resume(). This patch
addresses the original issue by scheduling upload_pm_data() to
execute in workqueue context.
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: stable@vger.kernel.org
Based-on-patch-by: Konrad Wilk <konrad.wilk@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Replace hard coded "ACPI0007" with ACPI_PROCESSOR_DEVICE_HID
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix and cleanup from Juergen Gross:
"This contains one fix for MSIX handling under Xen and a trivial
cleanup patch"
* tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Remove duplicate inclusion of linux/init.h
xen: do not re-use pirq number cached in pci device msi msg data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Two tiny implementations of the DMA API for callback in ARM (for Xen)"
* 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb-xen: implement xen_swiotlb_get_sgtable callback
swiotlb-xen: implement xen_swiotlb_dma_mmap callback
|
|
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
<linux/sched/mm.h>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
The APIs that are going to be moved first are:
mm_alloc()
__mmdrop()
mmdrop()
mmdrop_async_fn()
mmdrop_async()
mmget_not_zero()
mmput()
mmput_async()
get_task_mm()
mm_access()
mm_release()
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch remove duplicate inclusion of linux/init.h in
xenbus_dev_frontend.c.
Confirm successfully compile after remove the line.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
|
|
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The purpose if this ioctl is to allow a user of privcmd to restrict its
operation such that it will no longer service arbitrary hypercalls via
IOCTL_PRIVCMD_HYPERCALL, and will check for a matching domid when
servicing IOCTL_PRIVCMD_DM_OP or IOCTL_PRIVCMD_MMAP*. The aim of this
is to limit the attack surface for a compromised device model.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism
for restricting device emulators (such as QEMU) to a limited set of
hypervisor operations, and being able to audit those operations in the
kernel of the domain in which they run.
This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op.
NOTE: There is no requirement for user-space code to bounce data through
locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since
privcmd has enough information to lock the original buffers
directly.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
|
