summaryrefslogtreecommitdiff
path: root/drivers/xen
AgeCommit message (Collapse)Author
2018-08-23Merge tag 'for-linus-4.19b-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: "Some cleanups, some minor fixes and a fix for a bug introduced in this merge window hitting 32-bit PV guests" * tag 'for-linus-4.19b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: enable early use of set_fixmap in 32-bit Xen PV guest xen: remove unused hypercall functions x86/xen: remove unused function xen_auto_xlated_memory_setup() xen/ACPI: don't upload Px/Cx data for disabled processors x86/Xen: further refine add_preferred_console() invocations xen/mcelog: eliminate redundant setting of interface version x86/Xen: mark xen_setup_gdt() __init
2018-08-22mm, oom: distinguish blockable mode for mmu notifiersMichal Hocko
There are several blockable mmu notifiers which might sleep in mmu_notifier_invalidate_range_start and that is a problem for the oom_reaper because it needs to guarantee a forward progress so it cannot depend on any sleepable locks. Currently we simply back off and mark an oom victim with blockable mmu notifiers as done after a short sleep. That can result in selecting a new oom victim prematurely because the previous one still hasn't torn its memory down yet. We can do much better though. Even if mmu notifiers use sleepable locks there is no reason to automatically assume those locks are held. Moreover majority of notifiers only care about a portion of the address space and there is absolutely zero reason to fail when we are unmapping an unrelated range. Many notifiers do really block and wait for HW which is harder to handle and we have to bail out though. This patch handles the low hanging fruit. __mmu_notifier_invalidate_range_start gets a blockable flag and callbacks are not allowed to sleep if the flag is set to false. This is achieved by using trylock instead of the sleepable lock for most callbacks and continue as long as we do not block down the call chain. I think we can improve that even further because there is a common pattern to do a range lookup first and then do something about that. The first part can be done without a sleeping lock in most cases AFAICS. The oom_reaper end then simply retries if there is at least one notifier which couldn't make any progress in !blockable mode. A retry loop is already implemented to wait for the mmap_sem and this is basically the same thing. The simplest way for driver developers to test this code path is to wrap userspace code which uses these notifiers into a memcg and set the hard limit to hit the oom. This can be done e.g. after the test faults in all the mmu notifier managed memory and set the hard limit to something really small. Then we are looking for a proper process tear down. [akpm@linux-foundation.org: coding style fixes] [akpm@linux-foundation.org: minor code simplification] Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp Reported-by: David Rientjes <rientjes@google.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20xen/ACPI: don't upload Px/Cx data for disabled processorsJan Beulich
This is unnecessary and triggers a warning in the hypervisor. Often systems have more processor entries in their ACPI tables than are actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be reliably used, but the ACPI_MADT_ENABLED bit can. In order to not introduce new functions in the main ACPI processor driver code, simply use acpi_get_phys_id(), which does more than we need, but which checks the MADT enabled bit in the process. Any CPU for which we can't determine the APIC ID is unlikely to work properly anyway, so the extra checks done by acpi_get_phys_id() should do no harm. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20xen/mcelog: eliminate redundant setting of interface versionJan Beulich
This already gets done in HYPERVISOR_mca(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-08-15Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-08-08xen/balloon: fix balloon initialization for PVH Dom0Roger Pau Monne
The current balloon code tries to calculate a delta factor for the balloon target when running in HVM mode in order to account for memory used by the firmware. This workaround for memory accounting doesn't work properly on a PVH Dom0, that has a static-max value different from the target value even at startup. Note that this is not a problem for DomUs because guests are started with a static-max value that matches the amount of RAM in the memory map. Fix this by forcefully setting target_diff for Dom0, regardless of it's mode. Reported-by: Gabriel Bercarug <bercarug@amazon.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-06xen/biomerge: Use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-02scsi: target: loop, usb, vhost, xen: use target_remove_sessionMike Christie
This converts drivers that were only calling transport_deregister_session to use target_remove_session. The calling of transport_deregister_session_configfs via target_remove_session for these types of drivers is ok, because they were not exporting info from fields like sess_acl_list, sess->se_tpg and sess->fabric_sess_ptr from configfs accessible functions, so they will see no difference. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: target: rename target_alloc_sessionMike Christie
Rename target_alloc_session to target_setup_session to avoid confusion with the other transport session allocation function that only allocates the session and because the target_alloc_session does so much more. It allocates the session, sets up the nacl and registers the session. The next patch will then add a remove function to match the setup in this one, so it should make sense for all drivers, except iscsi, to just call those 2 functions to setup and remove a session. iscsi will continue to be the odd driver. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-31xen/gntdev: don't dereference a null gntdev_dmabuf on allocation failureColin Ian King
Currently when the allocation of gntdev_dmabuf fails, the error exit path will call dmabuf_imp_free_storage and causes a null pointer dereference on gntdev_dmabuf. Fix this by adding an error exit path that won't free gntdev_dmabuf. Detected by CoverityScan, CID#1472124 ("Dereference after null check") Fixes: bf8dc55b1358 ("xen/gntdev: Implement dma-buf import functionality") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/gntdev: Implement dma-buf import functionalityOleksandr Andrushchenko
1. Import a dma-buf with the file descriptor provided and export granted references to the pages of that dma-buf into the array of grant references. 2. Add API to close all references to an imported buffer, so it can be released by the owner. This is only valid for buffers created with IOCTL_GNTDEV_DMABUF_IMP_TO_REFS. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/gntdev: Implement dma-buf export functionalityOleksandr Andrushchenko
1. Create a dma-buf from grant references provided by the foreign domain. By default dma-buf is backed by system memory pages, but by providing GNTDEV_DMA_FLAG_XXX flags it can also be created as a DMA write-combine/coherent buffer, e.g. allocated with corresponding dma_alloc_xxx API. Export the resulting buffer as a new dma-buf. 2. Implement waiting for the dma-buf to be released: block until the dma-buf with the file descriptor provided is released. If within the time-out provided the buffer is not released then -ETIMEDOUT error is returned. If the buffer with the file descriptor does not exist or has already been released, then -ENOENT is returned. For valid file descriptors this must not be treated as error. 3. Make gntdev's common code and structures available to dma-buf. [boris: added 'args.fd = -1' to dmabuf_exp_from_refs() to avoid an unnecessary warning about it not being initialized on i386 with gcc 8.1.1] Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/gntdev: Add initial support for dma-buf UAPIOleksandr Andrushchenko
Add UAPI and IOCTLs for dma-buf grant device driver extension: the extension allows userspace processes and kernel modules to use Xen backed dma-buf implementation. With this extension grant references to the pages of an imported dma-buf can be exported for other domain use and grant references coming from a foreign domain can be converted into a local dma-buf for local export. Implement basic initialization and stubs for Xen DMA buffers' support. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/gntdev: Make private routines/structures accessibleOleksandr Andrushchenko
This is in preparation for adding support of DMA buffer functionality: make map/unmap related code and structures, used privately by gntdev, ready for dma-buf extension, which will re-use these. Rename corresponding structures as those become non-private to gntdev now. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/gntdev: Allow mappings for DMA buffersOleksandr Andrushchenko
Allow mappings for DMA backed buffers if grant table module supports such: this extends grant device to not only map buffers made of balloon pages, but also from buffers allocated with dma_alloc_xxx. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/grant-table: Allow allocating buffers suitable for DMAOleksandr Andrushchenko
Extend grant table module API to allow allocating buffers that can be used for DMA operations and mapping foreign grant references on top of those. The resulting buffer is similar to the one allocated by the balloon driver in that proper memory reservation is made by ({increase|decrease}_reservation and VA mappings are updated if needed). This is useful for sharing foreign buffers with HW drivers which cannot work with scattered buffers provided by the balloon driver, but require DMAable memory instead. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/balloon: Share common memory reservation routinesOleksandr Andrushchenko
Memory {increase|decrease}_reservation and VA mappings update/reset code used in balloon driver can be made common, so other drivers can also re-use the same functionality without open-coding. Create a dedicated file for the shared code and export corresponding symbols for other kernel modules. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26xen/grant-table: Make set/clear page private code sharedOleksandr Andrushchenko
Make set/clear page private code shared and accessible to other kernel modules which can re-use these instead of open-coding. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-02scsi: target: Remove second argument from fabric_make_tpg()Bart Van Assche
Since most target drivers do not use the second fabric_make_tpg() argument ("group") and since it is trivial to derive the group pointer from the wwn pointer, do not pass the group pointer to fabric_make_tpg(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-23Merge tag 'for-linus-4.18-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "This contains the following fixes/cleanups: - the removal of a BUG_ON() which wasn't necessary and which could trigger now due to a recent change - a correction of a long standing bug happening very rarely in Xen dom0 when a hypercall buffer from user land was not accessible by the hypervisor for very short periods of time due to e.g. page migration or compaction - usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a Xen-related driver (no breakage possible as using those symbols without others already exported via EXPORT-SYMBOL_GPL() wouldn't make any sense) - a simplification for Xen PVH or Xen ARM guests - some additional error handling for callers of xenbus_printf()" * tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Remove unnecessary BUG_ON from __unbind_from_irq() xen: add new hypercall buffer mapping device xen/scsiback: add error handling for xenbus_printf scsi: xen-scsifront: add error handling for xenbus_printf xen/grant-table: Export gnttab_{alloc|free}_pages as GPL xen: add error handling for xenbus_printf xen: share start flags between PV and PVH
2018-06-22xen: Remove unnecessary BUG_ON from __unbind_from_irq()Boris Ostrovsky
Commit 910f8befdf5b ("xen/pirq: fix error path cleanup when binding MSIs") fixed a couple of errors in error cleanup path of xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to __unbind_from_irq() with an unbound irq, which would result in triggering the BUG_ON there. Since there is really no reason for the BUG_ON (xen_free_irq() can operate on unbound irqs) we can remove it. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-22xen: add new hypercall buffer mapping deviceJuergen Gross
For passing arbitrary data from user land to the Xen hypervisor the Xen tools today are using mlock()ed buffers. Unfortunately the kernel might change access rights of such buffers for brief periods of time e.g. for page migration or compaction, leading to access faults in the hypervisor, as the hypervisor can't use the locks of the kernel. In order to solve this problem add a new device node to the Xen privcmd driver to easily allocate hypercall buffers via mmap(). The memory is allocated in the kernel and just mapped into user space. Marked as VM_IO the user mapping will not be subject to page migration et al. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19scsi: target: Convert target drivers to use sbitmapMatthew Wilcox
The sbitmap and the percpu_ida perform essentially the same task, allocating tags for commands. The sbitmap outperforms the percpu_ida as documented here: https://lkml.org/lkml/2014/4/22/553 The sbitmap interface is a little harder to use, but being able to remove the percpu_ida code and getting better performance justifies the additional complexity. Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> # f_tcm Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: target: Abstract tag freeingMatthew Wilcox
Introduce target_free_tag() and convert all drivers to use it. Signed-off-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19xen/scsiback: add error handling for xenbus_printfZhouyang Jia
When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19xen/grant-table: Export gnttab_{alloc|free}_pages as GPLOleksandr Andrushchenko
Only gnttab_{alloc|free}_pages are exported as EXPORT_SYMBOL while all the rest are exported as EXPORT_SYMBOL_GPL, thus effectively making it not possible for non-GPL driver modules to use grant table module. Export gnttab_{alloc|free}_pages as EXPORT_SYMBOL_GPL so all the exports are aligned. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-19xen: add error handling for xenbus_printfZhouyang Jia
When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-06-12treewide: kvmalloc() -> kvmalloc_array()Kees Cook
The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This patch replaces cases of: kvmalloc(a * b, gfp) with: kvmalloc_array(a * b, gfp) as well as handling cases of: kvmalloc(a * b * c, gfp) with: kvmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(char) * COUNT + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvmalloc + kvmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvmalloc(C1 * C2 * C3, ...) | kvmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvmalloc(sizeof(THING) * C2, ...) | kvmalloc(sizeof(TYPE) * C2, ...) | kvmalloc(C1 * C2 * C3, ...) | kvmalloc(C1 * C2, ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge tag 'for-linus-4.18-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "This contains some minor code cleanups (fixing return types of functions), some fixes for Linux running as Xen PVH guest, and adding of a new guest resource mapping feature for Xen tools" * tag 'for-linus-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/PVH: Make GDT selectors PVH-specific xen/PVH: Set up GS segment for stack canary xen/store: do not store local values in xen_start_info xen-netfront: fix xennet_start_xmit()'s return type xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE xen: Change return type to vm_fault_t
2018-05-18xen-swiotlb: fix the check condition for xen_swiotlb_free_coherentJoe Jin
When run raidconfig from Dom0 we found that the Xen DMA heap is reduced, but Dom Heap is increased by the same size. Tracing raidconfig we found that the related ioctl() in megaraid_sas will call dma_alloc_coherent() to apply memory. If the memory allocated by Dom0 is not in the DMA area, it will exchange memory with Xen to meet the requiment. Later drivers call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent() the check condition (dev_addr + size - 1 <= dma_mask) is always false, it prevents calling xen_destroy_contiguous_region() to return the memory to the Xen DMA heap. This issue introduced by commit 6810df88dcfc2 "xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.". Signed-off-by: Joe Jin <joe.jin@oracle.com> Tested-by: John Sobecki <john.sobecki@oracle.com> Reviewed-by: Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-05-17xen/store: do not store local values in xen_start_infoRoger Pau Monne
There's no need to store the xenstore page or event channel in xen_start_info if they are locally initialized. This also fixes PVH local xenstore initialization due to the lack of xen_start_info in that case. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-05-14xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCEPaul Durrant
My recent Xen patch series introduces a new HYPERVISOR_memory_op to support direct priv-mapping of certain guest resources (such as ioreq pages, used by emulators) by a tools domain, rather than having to access such resources via the guest P2M. This patch adds the necessary infrastructure to the privcmd driver and Xen MMU code to support direct resource mapping. NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now allow a PV tools domain to map guest pages either by GFN or MFN, thus the term 'mfn' has been swapped for 'pfn' in the lower layers of the remap code. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-05-14xen: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-04-20Merge tag 'for-linus-4.17-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - some fixes of kmalloc() flags - one fix of the xenbus driver - an update of the pv sound driver interface needed for a driver which will go through the sound tree * tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus_dev_frontend: Really return response string xen/sndif: Sync up with the canonical definition in Xen xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
2018-04-17xen: xenbus_dev_frontend: Really return response stringSimon Gaiser
xenbus_command_reply() did not actually copy the response string and leaked stack content instead. Fixes: 9a6161fe73bd ("xen: return xenstore command failures via response instead of rc") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_addJia-Ju Bai
pcistub_reg_add() is never called in atomic context. pcistub_reg_add() is only called by pcistub_quirk_add, which is only set in DRIVER_ATTR(). Despite never getting called from atomic context, pcistub_reg_add() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai
xen_pcibk_config_quirks_init xen_pcibk_config_quirks_init() is never called in atomic context. The call chains ending up at xen_pcibk_config_quirks_init() are: [1] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, xen_pcibk_config_quirks_init() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_allocJia-Ju Bai
pcistub_device_alloc() is never called in atomic context. The call chain ending up at pcistub_device_alloc() is: [1] pcistub_device_alloc() <- pcistub_seize() <- pcistub_probe() pcistub_probe() is only set as ".probe" in struct pci_driver. This function is not called in atomic context. Despite never getting called from atomic context, pcistub_device_alloc() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_deviceJia-Ju Bai
pcistub_init_device() is never called in atomic context. The call chain ending up at pcistub_init_device() is: [1] pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, pcistub_init_device() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probeJia-Ju Bai
pcistub_probe() is never called in atomic context. This function is only set as ".probe" in struct pci_driver. Despite never getting called from atomic context, pcistub_probe() calls kmalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-12Merge tag 'for-linus-4.17-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A few fixes of Xen related core code and drivers" * tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen xen/acpi: off by one in read_acpi_id() xen/acpi: upload _PSD info for non Dom0 CPUs too x86/xen: Delay get_cpu_cap until stack canary is established xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END xen: xenbus: Catch closing of non existent transactions xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
2018-03-30xen/acpi: off by one in read_acpi_id()Dan Carpenter
If acpi_id is == nr_acpi_bits, then we access one element beyond the end of the acpi_psd[] array or we set one bit beyond the end of the bit map when we do __set_bit(acpi_id, acpi_id_present); Fixes: 59a568029181 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen/acpi: upload _PSD info for non Dom0 CPUs tooJoao Martins
All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and changing only the acpi_id. For processors which P-state coordination type is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information (_PSD), because Xen will ignore any cpufreq domains created for past CPUs. Albeit for platforms which expose coordination types as SW_ANY or SW_ALL, this will have some unintended side effects. Effectively, it will look at the P-state domain existence and *if it already exists* it will skip the acpi-cpufreq initialization and thus inherit the policy from the first CPU in the cpufreq domain. This will finally lead to the original cpu not changing target freq to P0 other than the first in the domain. Which will make turbo boost not getting enabled (e.g. for 'performance' governor) for all cpus. This patch fixes that, by also evaluating _PSD when we enumerate all ACPI processors and thus always uploading the correct info to Xen. We export acpi_processor_get_psd() for that this purpose, but change signature to not assume an existent of acpi_processor given that ACPI isn't creating an acpi_processor for non-dom0 CPUs. Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_ENDSimon Gaiser
By guaranteeing that the argument of XS_TRANSACTION_END is valid we can assume that the transaction has been closed when we get an XS_ERROR response from xenstore (Note that we already verify that it's a valid transaction id). Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus: Catch closing of non existent transactionsSimon Gaiser
Users of the xenbus functions should never close a non existent transaction (for example by trying to closing the same transaction twice) but better catch it in xs_request_exit() than to corrupt the reference counter. Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-21xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handlingSimon Gaiser
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") made a subtle change to the semantic of xenbus_dev_request_and_reply() and xenbus_transaction_end(). Before on an error response to XS_TRANSACTION_END xenbus_dev_request_and_reply() would not decrement the active transaction counter. But xenbus_transaction_end() has always counted the transaction as finished regardless of the response. The new behavior is that xenbus_dev_request_and_reply() and xenbus_transaction_end() will always count the transaction as finished regardless the response code (handled in xs_request_exit()). But xenbus_dev_frontend tries to end a transaction on closing of the device if the XS_TRANSACTION_END failed before. Trying to close the transaction twice corrupts the reference count. So fix this by also considering a transaction closed if we have sent XS_TRANSACTION_END once regardless of the return code. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-03-20x86/dma: Remove dma_alloc_coherent_mask()Christoph Hellwig
These days all devices (including the ISA fallback device) have a coherent DMA mask set, so remove the workaround. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-3-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>