summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2018-10-22watchdog: ts4800: release syscon device node in ts4800_wdt_probe()Alexey Khoroshilov
Put syscon device node when it is not needed anymore. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13watchdog: armada_37xx_wdt: use do_div for u64 divisionMarek Behún
When the driver is built on 32 bit architectures during compile test, the linker complains about "__udivdi3" being undefined. We have to use do_div macro instead of the division operator when dividing u64 value. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13watchdog: Add support for Armada 37xx CPU watchdogMarek Behún
This adds support for the CPU watchdog found on Marvell Armada 37xx SoCs. There are 4 counters which can be set as CPU watchdog counters. This driver uses the second counter (ID 1, counting from 0) as watchdog counter, and first counter (ID 0) to implement pinging on the second counter without the need to disable it. Since counters IDs 2 and 3 are enabled already before even U-Boot starts, this driver does not use them at all, for example by adding a device tree property for counter selection. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13watchdog: mpc8xxx: provide boot statusChristophe Leroy
mpc8xxx watchdog driver supports the following platforms: - mpc8xx - mpc83xx - mpc86xx Those three platforms have a 32 bits register which provides the reason of the last boot, including whether it was caused by the watchdog. mpc8xx: Register RSR, bit SWRS (bit 3) mpc83xx: Register RSR, bit SWRS (bit 28) mpc86xx: Register RSTRSCR, bit WDT_RR (bit 11) This patch maps the register as defined in the device tree and updates wdt.bootstatus based on the value of the watchdog related bit. Then the information can be retrieved via the WDIOC_GETBOOTSTATUS ioctl. Hereunder is an example of devicetree for mpc8xx, the Reset Status Register being at offset 0x288: WDT: watchdog@0 { compatible = "fsl,mpc823-wdt"; reg = <0x0 0x10 0x288 0x4>; }; On the mpc83xx, RSR is at offset 0x910 On the mpc86xx, RSTRSCR is at offset 0xe0094 Suggested-by: Radu Rendec <radu.rendec@gmail.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # On mpc885 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: rza_wdt: Support longer timeoutsChris Brandt
The RZ/A2 watchdog timer extends the clock source options in order to allow for longer timeouts. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: hpwdt: Disable PreTimeout when Timeout is smallerJerry Hoemann
During module install, disable pretimeout if the requested timeout value is not greater than the minimal pretimeout value that is supported by hardware. This makes the module load handling of pretimeout consistent with the ioctl handling of pretimeout. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798DGuenter Roeck
The watchdog controller on NCT6796D, NCT6797D, and NCT6798D is compatible with the wtachdog controller on other Nuvoton chips. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: mpc8xxx: use dev_xxxx() instead of pr_xxxx()Christophe Leroy
mpc8xxx watchdog driver is a platform device drivers, it is therefore possible to use dev_xxx() messaging rather than pr_xxx() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: lantiq: add get_timeleft callbackHauke Mehrtens
This callback will provide the current time left. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: lantiq: Convert to watchdog_deviceHauke Mehrtens
Instead of doing the ioctl handling manually just use register a watchdog_device and let the watchdog framework do the ioctl handling. This also removes the ltq_wdt_bootstatus_set typedef and replaces it with a structure providing the chip specific functions pointer. The watchdog_init_timeout() function is now used and the initial timeout can be provided in device tree. If the watchdog was already activated it will not be stopped any more, but the settings from the driver will be used and the watchdog subsystem will take care. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: lantiq: update register names to better match specHauke Mehrtens
Some of the names of the bits were confusing to me. Now the bits share the same prefix as the register they are set on. The LTQ_WDT_CR_PWL register (bits 26:25) is the pre warning limit and it does not turn anything on. It has 4 possible divers 1/2, 1/4, 1/8 and 1/16, this drivers only uses 1/16. The LTQ_WDT_CR_CLKDIV register bits(25:24) is only configuring a clock divers and do not turn any thing on too, all possible values are valid dividers. Using the LTQ_WDT_SR prefix is also wrong these bits are used in the LTQ_WDT_CR registers, SR is the status register which is read only. This uses GENMASK where it is a mask and it uses shifts when a value is written to some bits. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: sama5d4: fix timeout-sec usageRomain Izard
When using watchdog_init_timeout to update the default timeout value, an error means that there is no "timeout-sec" in the relevant device tree node. This should not prevent binding of the driver to the device. Fixes: 976932e40036 ("watchdog: sama5d4: make use of timeout-secs provided in devicetree") Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: fix a small number of "watchog" typos in commentsRobert P. J. Day
All typos in comments, should not affect functionality. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: rza_wdt: convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: iTCO_wdt: Remove unused hooksJean Delvare
As the only user of iTCO_vendor_pre_keepalive and iTCO_vendor_pre_set_heartbeat has just been removed, we can delete these 2 hooks. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Martin Wilck <mwilck@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: iTCO_wdt: Drop option vendorsupport=2Jean Delvare
iTCO_vendor_support's option vendorsupport=2 is a gross hack. It claims to extend the existing iTCO_wdt driver, but in fact programs a watchdog on a completely different device (Super-I/O) without requesting its I/O ports and without checking the device ID. This is an utterly dangerous thing to do. It also turns out to be unnecessary, because as far as I can tell, the code in question is basically duplicating what the clean w83627hf_wdt driver is doing. My guess is that on these SuperMicro boards which sparkled the implementation of vendorsupport=2, the watchdog functionality of the Intel south bridge is not used, and the watchdog feature of some W83627HF-like Super-I/O chip is used instead. So we should point the users to the w83627hf_wdt driver. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Martin Wilck <mwilck@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: renesas_wdt: stop when unregisteringWolfram Sang
We want to go into a sane state when unregistering. Currently, it happens that the watchdog stops when unbinding because of RuntimePM stopping the core clock. When rebinding, the core clock gets reactivated and the watchdog fires even though it hasn't been opened by userspace yet. Strange scenario, yes, but sane state is much preferred anyhow. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: core: fix null pointer dereference when releasing cdevWolfram Sang
watchdog_stop() calls watchdog_update_worker() which needs a valid wdd->wd_data pointer. So, when unregistering the cdev, clear the pointers after we call watchdog_stop(), not before. Fixes: bb292ac1c602 ("watchdog: Introduce watchdog_stop_on_unregister helper") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: renesas_wdt: use SPDX identifier for Renesas driversWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: hpwdt: Update version number.Jerry Hoemann
Bump version number to reflect recent bug fixes. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: hpwdt: Module paramerter alias.Jerry Hoemann
Add module parameter "timeout" as an alias to "soft_margin." This aligns hpwdt usage more closely with other WDT while retaining backwards compatibility. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: hpwdt: Display module parameters.Jerry Hoemann
Print module parameters when the driver is loaded. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: hpwdt: Claim NMI from iLOJerry Hoemann
The hwpdt driver is overloaded for handling both the iLO watchdog and the explicit "Generate NMI to System" virutal button. Hence NMI handler needs to claim NMI resulting from the virutal button. Claim if iLO generated accommodating firmware that might set wrong bit. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: hpwdt: Initialize pretimeout from module parameter.Jerry Hoemann
When the pretimeout is specified as a module parameter, the value should be reflected in hpwdt_dev.pretimeout. The default (on) case is correct. But, when disabling pretimeout, the value should be set to zero in hpwdt_dev. When compiling w/o CONFIG_HPWDT_NMI_DECODING defined, the pretimeout module parameter is ignored and the value internally will be 0. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-22include/linux/compiler*.h: make compiler-*.h mutually exclusiveNick Desaulniers
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6") recently exposed a brittle part of the build for supporting non-gcc compilers. Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and __GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't added compiler specific checks for __clang__ or __INTEL_COMPILER. This is brittle, as they happened to get compatibility by posing as a certain version of GCC. This broke when upgrading the minimal version of GCC required to build the kernel, to a version above what ICC and Clang claim to be. Rather than always including compiler-gcc.h then undefining or redefining macros in compiler-intel.h or compiler-clang.h, let's separate out the compiler specific macro definitions into mutually exclusive headers, do more proper compiler detection, and keep shared definitions in compiler_types.h. Fixes: cafa0010cd51 ("Raise the minimum required gcc version to 4.6") Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Eli Friedman <efriedma@codeaurora.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18Merge tag 'linux-watchdog-4.19-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add MEN 16z069 IP-Core driver - renesas-wdt: add support for the R8A77990 wdt - stm32_iwdg: Add stm32mp1 support and pclk feature - sp805_wdt, orion_wdt, sprd_wdt: several improvements - imx2_wdt, stmp3xxx: switch to SPDX identifier * tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: fix dependencies of menz69_wdt.o watchdog: sp805: Add clock-frequency property watchdog: add driver for the MEN 16z069 IP-Core watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe() watchdog: stmp3xxx: Switch to SPDX identifier watchdog: imx2_wdt: Switch to SPDX identifier watchdog: sp805: set WDOG_HW_RUNNING when appropriate watchdog: sp805: add 'timeout-sec' DT property support dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805 dt-bindings: watchdog: Consolidate SP805 binding docs watchdog: orion_wdt: Mark watchdog as active when running at probe watchdog: stm32: add pclk feature for stm32mp1 dt-bindings: watchdog: add stm32mp1 support dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt
2018-08-06watchdog: fix dependencies of menz69_wdt.oJohannes Thumshirn
Currently menz69_wdt.ko has a dependency on MCB or COMPILE_TEST. But it actually needs symbols exported by MCB so the || COMPILE_TEST is wrong. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-06watchdog: sp805: Add clock-frequency propertySrinath Mannam
Use clock-frequency property given in _DSD object of ACPI device to calculate Watchdog rate as binding clock devices are not available as device tree. Note: There is no formal review process for _DSD properties Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: add driver for the MEN 16z069 IP-CoreJohannes Thumshirn
Add a driver for the MEN 16z069 Watchdog and Reset Controller IP-Core. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Michael Moese <mmoese@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: stmp3xxx: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: imx2_wdt: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: sp805: set WDOG_HW_RUNNING when appropriateRay Jui
If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework, until the userspace watchdog daemon takes over control Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: sp805: add 'timeout-sec' DT property supportRay Jui
Add support for optional devicetree property 'timeout-sec'. 'timeout-sec' is used in the driver if specified in devicetree. Otherwise, fall back to driver default, i.e., 60 seconds Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: orion_wdt: Mark watchdog as active when running at probeMaxim Kochetkov
If the watchdog is fully enabled and running at probe, mark it as such so the watchdog core can handle it until the watchdog device is opened. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [groeck: Updated subject and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: stm32: add pclk feature for stm32mp1Ludovic Barre
This patch adds compatible data to manage pclk clock by compatible. Adds stm32mp1 support which requires pclk clock. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12Merge tag 'mips_4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.18. Rough overview: - MAINTAINERS: Add Paul Burton as MIPS co-maintainer - Misc: Generic compiler intrinsics, Y2038 improvements, Perf+MT fixes - Platform support: Netgear WNR1000 V3, Microsemi Ocelot integrated switch, Ingenic watchdog cleanups More detailed summary: Maintainers: - Add Paul Burton as MIPS co-maintainer, as I soon won't have access to much MIPS hardware, nor enough time to properly maintain MIPS on my own. Miscellaneous: - Use generic GCC library routines from lib/ - Add notrace to generic ucmpdi2 implementation - Rename compiler intrinsic selects to GENERIC_LIB_* - vmlinuz: Use generic ashldi3 - y2038: Convert update/read_persistent_clock() to *_clock64() - sni: Remove read_persistent_clock() - perf: Fix perf with MT counting other threads - Probe for per-TC perf counters in cpu-probe.c - Use correct VPE ID for VPE tracing Minor cleanups: - Avoid unneeded built-in.a in DTS dirs - sc-debugfs: Re-use kstrtobool_from_user - memset.S: Reinstate delay slot indentation - VPE: Fix spelling "uneeded" -> "Unneeded" Platform support: BCM47xx: - Add support for Netgear WNR1000 V3 - firmware: Support small NVRAM partitions - Use __initdata for LEDs platform data Ingenic: - Watchdog driver & platform code improvements: - Disable clock after stopping counter - Use devm_* functions - Drop module remove function - Move platform reset code to restart handler in driver - JZ4740: Convert watchdog instantiation to DT - JZ4780: Fix watchdog DT node - qi_lb60_defconfig: Enable watchdog driver Microsemi: - Ocelot: Add support for integrated switch - pcb123: Connect phys to ports" * tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) MAINTAINERS: Add Paul Burton as MIPS co-maintainer MIPS: ptrace: Make FPU context layout comments match reality MIPS: memset.S: Reinstate delay slot indentation MIPS: perf: Fix perf with MT counting other threads MIPS: perf: Use correct VPE ID when setting up VPE tracing MIPS: perf: More robustly probe for the presence of per-tc counters MIPS: Probe for MIPS MT perf counters per TC MIPS: mscc: Connect phys to ports on ocelot_pcb123 MIPS: mscc: Add switch to ocelot MIPS: JZ4740: Drop old platform reset code MIPS: qi_lb60: Enable the jz4740-wdt driver MIPS: JZ4780: dts: Fix watchdog node MIPS: JZ4740: dts: Add bindings for the jz4740-wdt driver watchdog: JZ4740: Drop module remove function watchdog: JZ4740: Register a restart handler watchdog: JZ4740: Use devm_* functions watchdog: JZ4740: Disable clock after stopping counter MIPS: VPE: Fix spelling mistake: "uneeded" -> "unneeded" MIPS: Re-use kstrtobool_from_user() MIPS: Convert update_persistent_clock() to update_persistent_clock64() ...
2018-06-07watchdog: da9063: remove duplicated timeout_to_sel callsMarco Felsch
Every time da9063_wdt_update_timeout() gets called a timeout_to_sel() is made because the timeout argument of update_timeout() is the raw register value. Moving the second<->raw-value translation into da9063_wdt_update_timeout() removes duplicated code. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-07watchdog: da9063: rename helper function to avoid misunderstandingsMarco Felsch
_da9063_wdt_set_timeout() is called by da9063_wdg_set_timeout(), da9063_wdg_start() and da9063_wdg_probe() but the name expect only to be called by da9063_wdg_set_timeout(). Rename the function to avoid misunderstandings. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9062: remove unused codeMichael Grzeschik
The patch "watchdog: da9062: use protection delay mechanism from core" (fb484262) removed the only user of j_time_stamp. This turned into some leftover functions that are removed with this patch. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9063: Fix timeout handling during probeMarco Felsch
The watchdog can be enabled in previous steps (e.g. the bootloader). Set the driver default timeout value (8s) if the watchdog is already running and the HW_RUNNING flag. So the watchdog core framework will ping the watchdog till the user space activates the watchdog explicit with the desired timeout value. Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9063: Fix updating timeout valueMarco Felsch
The DA9063 watchdog has only one register field to store the timeout value and to enable the watchdog. The watchdog gets enabled if the value is not zero. There is no issue if the watchdog is already running but it leads into problems if the watchdog is disabled. If the watchdog is disabled and only the timeout value should be prepared the watchdog gets enabled too. Add a check to get the current watchdog state and update the watchdog timeout value on hw-side only if the watchdog is already active. Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-06-06watchdog: da9063: Fix setting/changing timeoutMarco Felsch
If the timeout value is set more than once the DA9063 watchdog triggers a reset signal which reset the system. To update the timeout value we have to disable the watchdog, clear the watchdog counter value and write the new timeout value to the watchdog. Clearing the counter value is a feature to be on the safe side because the data sheet doesn't describe the behaviour of the watchdog counter value after a watchdog disabling-enable-sequence. The patch is based on Philipp Zabel's previous patch. Fixes: 5e9c16e37608 ("watchdog: Add DA9063 PMIC watchdog driver.") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-05-21watchdog: mena21_wdt: Drop unnecessary mutex lockJia-Ju Bai
There is already a mutex in the watchdog core which serializes calls to the various API functions. So the mutex lock "drv->lock" is unnecessary and can be dropped. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2018-05-21watchdog: hpwdt: Claim NMIs generated by iLO5Jerry Hoemann
On iLO5 going forward we want to return and not claim the NMI, if the NMI was NOT gnerated by the iLO as a result of the watchdog timing out or an explicit generate NMI. The sense of the test in is inverted and prevents hpwdt_pretimeout from claiming NMIs when it should. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Fixes: a042229a18ac ("watchdog: hpwdt: Update nmi_panic message.") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21watchdog: sp805: add restart handlerJongsung Kim
Add restart handler for SP805 watchdog so that the driver can be used to reboot the system. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21watchdog: renesas-wdt: Remove R-Car M2-W ES2.x from blacklistGeert Uytterhoeven
System restart triggered by watchdog time-out works fine on a Koelsch board with R-Car M2-W ES2.0. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-21watchdog: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-05-14watchdog: JZ4740: Drop module remove functionPaul Cercueil
When the watchdog was configured for nowayout, and after the userspace watchdog daemon closed the dev node without sending the magic character, unloading this module stopped the watchdog hardware, which was clearly a problem. Besides, unloading the module is not possible when the userspace watchdog daemon is running, so it's safe to assume that we don't need to stop the watchdog hardware in the jz4740_wdt_remove() function. For this reason, the jz4740_wdt_remove() function can then be dropped alltogether. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: James Hogan <jhogan@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 23:28:44 +0000