summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2020-04-01watchdog: Add K3 RTI watchdog supportTero Kristo
Texas Instruments K3 SoCs contain an RTI (Real Time Interrupt) module which can be used as a watchdog. This IP provides a support for windowed watchdog mode, in which the watchdog must be petted within a certain time window. If it is petted either too soon, or too late, a watchdog error will be triggered. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200312095808.19907-4-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-04-01watchdog: ziirave_wdt: change name to be more specificLucas Stach
The RAVE watchdog is not a full system watchdog, but is used to reset ethernet switch when required. Change the name to better reflect this usage. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313101138.25915-1-l.stach@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-04-01watchdog: orion: use 0 for unset heartbeatChris Packham
If the heartbeat module param is not specified we would get an error message watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range watchdog: f1020300.watchdog: falling back to default timeout (171) This is because we were initialising heartbeat to -1. By removing the initialisation (thus letting the C run time initialise it to 0) we silence the warning message and the default timeout is still used. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313031312.1485-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: npcm: remove whitespacesTomer Maimon
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20200303100114.87786-4-tmaimon77@gmail.com Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: reset last_hw_keepalive time at startTero Kristo
Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: imx2_wdt: Drop .remove callbackAnson Huang
.remove callback implementation doesn' call clk_disable_unprepare() which is buggy, actually, we can just use devm_watchdog_register_device() and devm_add_action_or_reset() to handle all necessary operations for remove action, then .remove callback can be dropped. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1582512687-13312-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: Add stop_on_reboot parameter to control reboot policyDmitry Safonov
Many watchdog drivers use watchdog_stop_on_reboot() helper in order to stop the watchdog on system reboot. Unfortunately, this logic is coded in driver's probe function and doesn't allows user to decide what to do during shutdown/reboot. On the other side, Xen and Qemu watchdog drivers (xen_wdt and i6300esb) may be configured to either send NMI or turn off/reboot VM as the watchdog action. As the kernel may stuck at any state, sending NMIs can't reliably reboot the VM. At Arista, we benefited from the following set-up: the emulated watchdogs trigger VM reset and softdog is set to catch less severe conditions to generate vmcore. Just before reboot watchdog's timeout is increased to some good-enough value (3 mins). That keeps watchdog always running and guarantees that VM doesn't stuck. Provide new stop_on_reboot module parameter to let user control watchdog's reboot policy. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200223114939.194754-1-dima@arista.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: wm831x_wdt: Remove GPIO handlingLinus Walleij
An attempt to convert the driver to using GPIO descriptors (see Link tag) was discouraged in favor of deleting the handling of the update GPIO altogehter since there are no in-tree users. This patch deletes the GPIO handling instead. Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-watchdog/20200210102209.289379-1-linus.walleij@linaro.org/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200229115046.57781-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: imx7ulp: Remove unused include of init.hAnson Huang
There is nothing in use from init.h, remove it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1582250430-8872-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: imx_sc_wdt: Remove unused includesAnson Huang
There is nothing in use from init.h/reboot.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1582250430-8872-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: qcom: Use irq flags from firmwareStephen Boyd
The DT or ACPI tables should tell the driver what the irq flags are. Given that this driver probes only on DT based platforms and those DT platforms specify the irq flags we can safely drop the forced irq flag setting here. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/20200220002047.115000-1-swboyd@chromium.org [groeck: Context conflict resolution] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: pm8916_wdt: Add system sleep callbacksLoic Poulain
Add suspend and resume pm operations. Tested on dragonboard-410c. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1581435483-6796-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-18watchdog: qcom-wdt: disable pretimeout on timer platformAnsuel Smith
Some platform like ipq806x doesn't support pretimeout and define some interrupts used by qcom,msm-timer. Change the driver to check and use pretimeout only on qcom,kpss-wdt as it's the only platform that actually supports it. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200204195648.23350-1-ansuelsmth@gmail.com [groeck: Conflict resolution] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-03-10watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optionalMika Westerberg
The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version (or higher), and when legacy iTCO_vendorsupport is set. Modify the driver so that ICH_RES_IO_SMI is optional if the two conditions are not met. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10watchdog: iTCO_wdt: Export vendorsupportMika Westerberg
In preparation for making ->smi_res optional the iTCO_wdt driver needs to know whether vendorsupport is being set to non-zero. For this reason export the variable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-28Merge tag 'acpi-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Fix a couple of configuration issues in the ACPI watchdog (WDAT) driver (Mika Westerberg) and make it possible to disable that driver at boot time in case it still does not work as expected (Jean Delvare)" * tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: watchdog: Set default timeout in probe ACPI: watchdog: Fix gas->access_width usage ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro ACPI: watchdog: Allow disabling WDAT at boot
2020-02-17watchdog: da9062: Add dependency on I2CGuenter Roeck
Since commit 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic safe"), the driver calls i2c functions directly. It now therefore depends on I2C. This is a hard dependency which overrides COMPILE_TEST. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic safe") Cc: Marco Felsch <m.felsch@pengutronix.de> Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: Stefan Lengfeld <contact@stefanchrist.eu> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-17watchdog: da9062: fix power management opsMarco Felsch
This fixes commit f6c98b08381c ("watchdog: da9062: add power management ops"). During discussion [1] we agreed that this should be configurable because it is a device quirk if we can't use the hw watchdog auto suspend function. [1] https://lore.kernel.org/linux-watchdog/20191128171931.22563-1-m.felsch@pengutronix.de/ Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Fixes: f6c98b08381c ("watchdog: da9062: add power management ops") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200207071518.5559-1-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-17watchdog: da9062: do not ping the hw during stop()Marco Felsch
The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-17watchdog: fix mtk_wdt.c RESET_CONTROLLER build errorRandy Dunlap
Fix build error when CONFIG_RESET_CONTROLLER is not set by selecting RESET_CONTROLLER. ld: drivers/watchdog/mtk_wdt.o: in function `mtk_wdt_probe': mtk_wdt.c:(.text+0x3ec): undefined reference to `devm_reset_controller_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Fixes: c254e103082b74e ("watchdog: mtk_wdt: mt8183: Add reset controller") Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/77c1e557-4941-3806-2933-6c3583576390@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-13ACPI: watchdog: Set default timeout in probeMika Westerberg
If the BIOS default timeout for the watchdog is too small userspace may not have enough time to configure new timeout after opening the device before the system is already reset. For this reason program default timeout of 30 seconds in the driver probe and allow userspace to change this from command line or through module parameter (wdat_wdt.timeout). Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-13ACPI: watchdog: Fix gas->access_width usageMika Westerberg
ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-07Merge tag 'linux-watchdog-5.6-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27watchdog: da9062: make restart handler atomic safeMarco Felsch
The restart handler is executed during the shutdown phase which is atomic/irq-less. The i2c framework supports atomic transfers since commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") to address this use case. Using regmap within an atomic context is allowed only if the regmap type is MMIO and the cache type 'flat' or no cache is used. Using the i2c_smbus_write_byte_data() function can be done without additional tests because: 1) the DA9062 is an i2c-only device and 2) the i2c framework emulates the smbus protocol if the host adapter does not support smbus_xfer by using the master_xfer. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stefan Lengfeld <contact@stefanchrist.eu> Tested-by: Stefan Lengfeld <contact@stefanchrist.eu> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200115162307.7336-1-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: mtk_wdt: mt2712: Add reset controlleryong.liang
Add reset controller for 2712. Besides watchdog, MTK toprgu module alsa provide sub-system (eg, audio, camera, codec and connectivity) software reset functionality. Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-5-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: mtk_wdt: mt8183: Add reset controlleryong.liang
Add reset controller API in watchdog driver. Besides watchdog, MTK toprgu module alsa provide sub-system (eg, audio, camera, codec and connectivity) software reset functionality. Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-4-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: it87_wdt: add IT8786 IDVincent Prince
IT8786 watchdog works as in IT872x Tested on VECOW ECS-9000 board. Signed-off-by: Vincent Prince <Vincent.PRINCE.fr@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200123140544.25937-1-vincent.prince.fr@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: dw_wdt: ping watchdog to reset countdown before startJack Mitchell
Currently on an rk3288 SoC when trying to use the watchdog the SoC will instantly reset. This is due to the watchdog countdown counter being set to its initial value of 0x0. Reset the watchdog counter before start in order to correctly start the countdown timer from the right position. Signed-off-by: Jack Mitchell <ml@embed.me.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200107155155.278521-1-ml@embed.me.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: fix UAF in reboot notifier handling in watchdog core codeVladis Dronov
After the commit 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: cadence: Skip printing pointer valueSrinivas Neeli
"%p" is not printing the pointer value. In driver, printing pointer value is not useful so avoiding print. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1576825096-26605-1-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: qcom: Use platform_get_irq_optional() for bark irqSai Prakash Ranjan
platform_get_irq() prints an error message when the interrupt is not available. So on platforms where bark interrupt is not specified, following error message is observed on SDM845. [ 2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found This is also seen on SC7180, SM8150 SoCs as well. Fix this by using platform_get_irq_optional() instead. Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191213064934.4112-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: da9062: add power management opsMarco Felsch
Disable the watchdog during suspend if it is enabled and re-enable it on resume. So we can sleep without the interruptions. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191128171931.22563-1-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: make DesignWare watchdog allow users to set bigger timeout valueWang, Peng 1. (NSB - CN/Hangzhou)
watchdog_dev.c provides means to allow users to set bigger timeout value than HW can support, make DesignWare watchdog align with this. Signed-off-by: Peng Wang <peng.1.wang@nokia-sbell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/8fa54e92c6cd4544a7a3eb60a373ac43@nokia-sbell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probeChristophe Roullier
If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should start/reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set), until the userspace watchdog daemon takes over control Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver") Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdogEugen Hristev
Add support for SAM9X60 WDT into sama5d4_wdt. This means that this driver gets a flag inside the data struct that represents the sam9x60 support. This flag differentiates between the two hardware blocks, and is set according to the compatible of the driver instantiation. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1574067012-18559-3-git-send-email-eugen.hristev@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-30watchdog: orion: fix platform_get_irq() complaintsRussell King
Fix: orion_wdt f1020300.watchdog: IRQ index 1 not found which is caused by platform_get_irq() now complaining when optional IRQs are not found. Neither interrupt for orion is required, so make them both optional. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade
Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: tqmx86_wdt: Fix build errorYueHaibing
If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails: drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe': tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout' tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device' Select WATCHDOG_CORE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: max77620_wdt: fix potential build errorsDavid Engraf
max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()Fabio Estevam
Since commit 747d88a1a88c1b ("watchdog: imx7ulp: Pass the wdog instance in imx7ulp_wdt_enable()") imx7ulp_wdt_enable() accepts a watchdog_device structure, so fix one instance that missed such conversion. This also fixes the following sparse warning: drivers/watchdog/imx7ulp_wdt.c:115:31: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/imx7ulp_wdt.c:115:31: expected struct watchdog_device *wdog drivers/watchdog/imx7ulp_wdt.c:115:31: got void [noderef] <asn:2>*base Fixes: 747d88a1a88c1 ("watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191120140916.25001-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: w83627hf_wdt: Fix support NCT6116DSrikanth Krishnakar
We should select nct6116 for the new chip, not nct6102. Signed-off-by: Srikanth Krishnakar <skrishnakar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-01Merge tag 'linux-watchdog-5.5-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - support for NCT6116D - several small fixes and improvements * tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: jz4740: Drop dependency on MACH_JZ47xx watchdog: jz4740: Use regmap provided by TCU driver watchdog: jz4740: Use WDT clock provided by TCU driver dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible watchdog: sama5d4_wdt: cleanup the bit definitions watchdog: sprd: Fix the incorrect pointer getting from driver data watchdog: aspeed: Fix clock behaviour for ast2600 watchdog: imx7ulp: Fix reboot hang watchdog: make nowayout sysfs file writable watchdog: prevent deferral of watchdogd wakeup on RT watchdog: imx7ulp: Use definitions instead of magic values watchdog: imx7ulp: Remove inline annotations watchdog: imx7ulp: Remove unused structure member watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable() watchdog: wdat_wdt: Spelling s/configrable/configurable/ watchdog: bd70528: Trivial function documentation fix watchdog: cadence: Do not show error in case of deferred probe watchdog: Fix the race between the release of watchdog_core_data and cdev watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support ...
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-18watchdog: jz4740: Drop dependency on MACH_JZ47xxPaul Cercueil
Depending on MACH_JZ47xx prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-3-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: jz4740: Use regmap provided by TCU driverPaul Cercueil
Since we broke the ABI by changing the clock, the driver was also updated to use the regmap provided by the TCU driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-2-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: jz4740: Use WDT clock provided by TCU driverPaul Cercueil
Instead of requesting the "ext" clock and handling the watchdog clock divider and gating in the watchdog driver, we now request and use the "wdt" clock that is supplied by the ingenic-timer "TCU" driver. The major benefit is that the watchdog's clock rate and parent can now be specified from within devicetree, instead of hardcoded in the driver. Also, this driver won't poke anymore into the TCU registers to enable/disable the clock, as this is now handled by the TCU driver. On the bad side, we break the ABI with devicetree - as we now request a different clock. In this very specific case it is still okay, as every Ingenic JZ47xx-based board out there compile the devicetree within the kernel; so it's still time to push breaking changes, in order to get a clean devicetree that won't break once it musn't. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-1-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: sama5d4_wdt: cleanup the bit definitionsEugen Hristev
Cleanup the macro definitions to use BIT and align with two spaces. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1573806579-7981-1-git-send-email-eugen.hristev@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: sprd: Fix the incorrect pointer getting from driver dataShuiqing Li
The device driver data saved the 'struct sprd_wdt' object, it is incorrect to get 'struct watchdog_device' object from the driver data, thus fix it. Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Reported-by: Dongwei Wang <dongwei.wang@unisoc.com> Signed-off-by: Shuiqing Li <shuiqing.li@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.1573210405.git.baolin.wang@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 22:03:27 +0000