summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2019-09-27Merge tag 'linux-watchdog-5.4-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - addition of AST2600, i.MX7ULP and F81803 watchdog support - removal of the w90x900 and ks8695 drivers - ziirave_wdt improvements - small fixes and improvements * tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits) watchdog: f71808e_wdt: Add F81803 support watchdog: qcom: remove unnecessary variable from private storage watchdog: qcom: support pre-timeout when the bark irq is available watchdog: imx_sc: this patch just fixes whitespaces watchdog: apseed: Add access_cs0 option for alt-boot watchdog: aspeed: add support for dual boot watchdog: orion_wdt: use timer1 as a pretimeout watchdog: Add i.MX7ULP watchdog support dt-bindings: watchdog: Add i.MX7ULP bindings dt-bindings: watchdog: sun4i: Add the watchdog clock dt-bindings: watchdog: sun4i: Add the watchdog interrupts dt-bindings: watchdog: Convert Allwinner watchdog to a schema dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings watchdog: aspeed: Add support for AST2600 dt-bindings: watchdog: Add ast2600 compatible watchdog: ziirave_wdt: Update checked I2C functionality mask watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data() watchdog: ziirave_wdt: Fix DOWNLOAD_START payload watchdog: ziirave_wdt: Drop status polling code watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload ...
2019-09-24Merge branch 'i2c/for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
2019-09-17watchdog: f71808e_wdt: Add F81803 supportJaret Cantu
This adds watchdog support for the Fintek F81803 Super I/O chip. Testing was done on the Seneca XK-QUAD. Signed-off-by: Jaret Cantu <jaret.cantu@timesys.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190912175550.9340-1-jaret.cantu@timesys.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: qcom: remove unnecessary variable from private storageJorge Ramirez-Ortiz
there is no need to continue keeping the clock in private storage. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190906205411.31666-3-jorge.ramirez-ortiz@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: qcom: support pre-timeout when the bark irq is availableJorge Ramirez-Ortiz
Use the bark interrupt as the pre-timeout notifier whenever this interrupt is available. By default, the pretimeout notification shall occur one second earlier than the timeout. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190906205411.31666-2-jorge.ramirez-ortiz@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: this patch just fixes whitespacesOliver Graute
Fix only whitespace errors in imx_sc_wdt_probe() Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190905143644.20952-1-oliver.graute@kococonnector.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: aspeed: add support for dual bootIvan Mikhaylov
Set WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION into WDT_CLEAR_TIMEOUT_STATUS to clear out boot code source and re-enable access to the primary SPI flash chip while booted via wdt2 from the alternate chip. AST2400 datasheet says: "In the 2nd flash booting mode, all the address mapping to CS0# would be re-directed to CS1#. And CS0# is not accessible under this mode. To access CS0#, firmware should clear the 2nd boot mode register in the WDT2 status register WDT30.bit[1]." Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190828102402.13155-4-i.mikhaylov@yadro.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: orion_wdt: use timer1 as a pretimeoutChris Packham
The orion watchdog can either reset the CPU or generate an interrupt. The interrupt would be useful for debugging as it provides panic() output about the watchdog expiry, however if the interrupt is used the watchdog can't reset the CPU in the event of being stuck in a loop with interrupts disabled or if the CPU is prevented from accessing memory (e.g. an unterminated DMA). The Armada SoCs have spare timers that aren't currently used by the Linux kernel. We can use timer1 to provide a pre-timeout ahead of the watchdog timer and provide the possibility of gathering debug before the reset triggers. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190829215224.27956-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: Add i.MX7ULP watchdog supportAnson Huang
The i.MX7ULP Watchdog Timer (WDOG) module is an independent timer that is available for system use. It provides a safety feature to ensure that software is executing as planned and that the CPU is not stuck in an infinite loop or executing unintended code. If the WDOG module is not serviced (refreshed) within a certain period, it resets the MCU. Add driver support for i.MX7ULP watchdog. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1566999303-18795-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: aspeed: Add support for AST2600Ryan Chen
The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Update checked I2C functionality maskAndrey Smirnov
Update checked I2C functionality mask to reflect all of the SMBus primitives used by this driver. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-23-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()Andrey Smirnov
There's only one user of ziirave_firm_write_block_data(), so we may as well inline it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-22-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix DOWNLOAD_START payloadAndrey Smirnov
Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x10 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x10 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-21-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Drop status polling codeAndrey Smirnov
Bootloader firmware doesn't implement DOWNLOAD_START or DOWNLOAD_PACKET in a non-blocking way. It will stretch the clock of the first status byte read until the operation is complete. Polling for the status is not really necessary since it will always succed on the first try. Replace polling code with a simple single byte read to simplify things. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-20-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix RESET_PROCESSOR payloadAndrey Smirnov
Bootloader firmware expects the following traffic for RESET_PROCESSOR: S Addr Wr [A] 0x0b [A] 0x01 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x0b [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes and expected magic value matches byte count sent by i2c_smbus_write_block_data(). Fix this by converting the code to use i2c_smbus_write_byte_data() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-19-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix DOWNLOAD_END payloadAndrey Smirnov
Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x11 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x11 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-18-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix JUMP_TO_BOOTLOADER payloadAndrey Smirnov
Bootloader firmware expects the following traffic for JUMP_TO_BOOTLOADER: S Addr Wr [A] 0x0c [A] 0x01 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x0c [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes and expected magic value matches byte count sent by i2c_smbus_write_block_data(). Fix this by converting the code to use i2c_smbus_write_byte_data() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-17-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix misleading error messageAndrey Smirnov
Fix misleading error message in ziirave_wdt_init_duration(). Saying "unable to set ..." implies that an attempt at communication with watchdog device has taken palce and was not successful. In this case, however, all it indicates is that no reset pulse duration was specified either via kernel parameter or Device Tree. Re-phase the log message to be more clear about benign nature of this event. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-16-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't try to program readonly flashAndrey Smirnov
Bootloader code will ignore any attempts to write data to any flash area outside of [ZIIRAVE_FIRM_FLASH_MEMORY_START; ZIIRAVE_FIRM_FLASH_MEMORY_END]. Firmware update code already have an appropriate check to skip those areas when validating updated firmware. Firmware programming code, OTOH, does not and will needlessly send no-op I2C traffic. Add an appropriate check to __ziirave_firm_write_pkt() so as to save all of that wasted effort. While at it, normalize all of the address handling code to use full 32-bit address in units of bytes and convert it to an appropriate value only in places where that is necessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-15-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytesAndrey Smirnov
We only compare first 'len' bytes of read firmware, so we don't need to read more that that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-14-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't check if ihex record length is zeroAndrey Smirnov
Ihex_next_binrec() will return NULL if next record's 'len' is zero, so explicit checks for that in the driver are unnecessary. Drop them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-13-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Make use of put_unaligned_le16Andrey Smirnov
Instead of doing this explicitly use put_unaligned_le16() to place 16-bit address value into command payload. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-12-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Zero out only what's necessaryAndrey Smirnov
Instead of zeroing out all of the packet and then overwriting a significant portion of those zeros via memcpy(), zero out only a portion of the packet that is known to not contain any data. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-11-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZEAndrey Smirnov
Both memset() and ziirave_firm_write_block_data() expect length in bytes as an argument, not a number of elements in array. It just happens that in this particular case both values are equal. Modify the code to use sizeof() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-10-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Skip zeros when calculating checksumAndrey Smirnov
Zeros don't contribute anything to checksum value, so we can skip unused portion of the packet when calculating its checksum. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-9-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Check packet length only onceAndrey Smirnov
We don't need to check for packet length more than once, so drop the extra check in ziirave_firm_upload(). While at it move the check at the very start of __ziirave_firm_write_pkt(), as to not waste any time preparing a packet we'll never use. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-8-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt()Andrey Smirnov
There no reason why ziirave_firm_write_pkt() has to take firmware data via 'struct ihex_binrec' and it can just take address, data pointer and data length as individual arguments. Make this change to allow us to drastically simplify handling page crossing case by removing all of the extra code required to split 'struct ihex_binrec' into two. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-7-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Log bootloader/firmware info during probeAndrey Smirnov
Log bootloader/firmware info during probe. This information is available via sysfs already, but it's really helpful to have this in kernel log during startup as well. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-6-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't bail out on unexpected timeout valueAndrey Smirnov
Reprogramming bootloader on watchdog MCU will result in reported default timeout value of "0". That in turn will be unnecessarily rejected by the driver as invalid device (-ENODEV). Simplify probe to read stored timeout value, set it to a sane default if it is bogus, and then program that value unconditionally. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-5-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be more verbose during firmware updateAndrey Smirnov
Add more error logging to ziirave_firm_upload() for diagnostics. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-4-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be verbose about errors in probe()Andrey Smirnov
The driver is quite silent in case of probe failure, which makes it more difficult to diagnose problem from the kernel log. Add logging to all of the silent error paths ziirave_wdt_probe() to improve that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-3-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Add missing newlineAndrey Smirnov
Add missing newline. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-2-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: Remove unnecessary error logAnson Huang
An error message is already displayed by watchdog_register_device() when failed, so no need to have error log again for failure of calling devm_watchdog_register_device(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812084434.13316-1-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeoutRasmus Villemoes
Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: cpwd: use generic compat_ptr_ioctlArnd Bergmann
The cpwd_compat_ioctl() contains a bogus mutex that dates back to a leftover BKL instance. Simplify the implementation by using the new compat_ptr_ioctl() helper function that will do the right thing for all calls here. Note that WIOCSTART/WIOCSTOP don't take any arguments, so the compat_ptr() conversion is not needed here, but it also doesn't hurt. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190814204259.120942-6-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: diag288_wdt: Remove leftover includes from conversion to watchdog APIGuenter Roeck
Commit f7a94db4e959 ("s390/watchdog: use watchdog API") converted the driver to use the watchdog API, but some includes as well as MODULE_ALIAS_MISCDEV() were missed. Cc: Philipp Hachtmann <phacht@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16watchdog: remove w90x900 driverArnd Bergmann
The ARM w90x900 platform is getting removed, so this driver is obsolete Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190809202749.742267-7-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-16watchdog: remove ks8695 driverArnd Bergmann
The platform is getting removed, so there are no remaining users of this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190809202749.742267-5-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-16watchdog: pnx4008_wdt: allow compile-testingArnd Bergmann
The only thing that prevents building this driver on other platforms is the mach/hardware.h include, which is not actually used here at all, so remove the line and allow CONFIG_COMPILE_TEST. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190809144043.476786-4-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-03watchdog: iTCO: Add support for Cannon Lake PCH iTCOMika Westerberg
In Intel Cannon Lake PCH the NO_REBOOT bit was moved from the private register space to be part of the TCO1_CNT register. For this reason introduce another version (6) that uses this register to set and clear NO_REBOOT bit. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-22Merge tag 'Wimplicit-fallthrough-5.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through
2019-08-20watchdog: wdt285: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: footbridge_defconfig arm): drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’: drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] watchdog_ping(); ^~~~~~~~~~~~~~~ drivers/watchdog/wdt285.c:172:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-15watchdog: pnx4008_wdt: allow compile-testingArnd Bergmann
The only thing that prevents building this driver on other platforms is the mach/hardware.h include, which is not actually used here at all, so remove the line and allow CONFIG_COMPILE_TEST. Link: https://lore.kernel.org/r/20190809144043.476786-4-arnd@arndb.de Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-12watchdog: jz4740: Fix unused variable warning in jz4740_wdt_probeGustavo A. R. Silva
Fix the following warning (Building: ci20_defconfig mips): drivers/watchdog/jz4740_wdt.c: In function ‘jz4740_wdt_probe’: drivers/watchdog/jz4740_wdt.c:165:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret; ^~~ Fixes: 9ee644c9326c ("watchdog: jz4740_wdt: drop warning after registering device") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190806073953.GA13685@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: riowd: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190730014650.GA31309@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: wdt977: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190729223159.GA20878@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: scx200_wdt: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190729200602.GA6854@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190729151033.GA10143@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 17:52:03 +0000