summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2016-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) System call tracing doesn't handle register contents properly across the trace. From Mike Frysinger. 2) Hook up copy_file_range 3) Build fix for 32-bit with newer tools. 4) New sun4v watchdog driver, from Wim Coekaerts. 5) Set context system call has to allow for servicable faults when we flush the register windows to memory * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix sparc64_set_context stack handling. sparc32: Add -Wa,-Av8 to KBUILD_CFLAGS. Add sun4v_wdt watchdog driver sparc: Fix system call tracing register handling. sparc: Hook up copy_file_range syscall.
2016-01-31Add sun4v_wdt watchdog driverwim.coekaerts@oracle.com
This driver adds sparc hypervisor watchdog support. The default timeout is 60 seconds and the range is between 1 and 31536000 seconds. Both watchdog-resolution and watchdog-max-timeout MD properties settings are supported. Signed-off-by: Wim Coekaerts <wim.coekaerts@oracle.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-31watchdog: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-31watchdog: imgdpc: select WATCHDOG_COREArnd Bergmann
The imgpdc_wdt driver can be built on all architectures with CONFIG_COMPILE_TEST, but fails if no other watchdog driver is enabled: drivers/watchdog/built-in.o: In function `pdc_wdt_remove': imgpdc_wdt.c:(.text+0x74): undefined reference to `watchdog_unregister_device' This adds the normal 'select WATCHDOG_CORE' that is needed to ensure the driver always builds cleanly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-31watchdog: tango: rename ARCH_TANGOX to ARCH_TANGOMarc Gonzalez
This change was requested by arm-soc maintainer Kevin Hilman because the X in TANGOX is a wildcard. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-31watchdog: pcwd_usb: fix compilation warningTomas Winkler
In function ‘usb_pcwd_probe’: drivers/watchdog/pcwd_usb.c:611:12: warning: variable ‘maxp’ set but not used [-Wunused-but-set-variable] int pipe, maxp; Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-31watchdog: sp805: ping fails to abort wdt resetSandeep Tripathy
sp805 wdt asserts interrupt for the first expiry and reloads the counter. If wdt interrupt is set and count reaches zero then wdt reset event is generated. To get wdt reset at 't' timeout the driver loads wdt counter with 't/2'. A ping before time 't' *should* prevent wdt reset. Currently if ping is done after 't/2' then wdt interrupt condition gets set. On the next countdown of loadval wdt reset event occurs eventhough wdt was reloaded before the set timeout 't'. This patch clears the interrupt condition on ping. Signed-off-by: Sandeep Tripathy <tripathy@broadcom.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-31watchdog: max63xx: make module's license marker match the headerUwe Kleine-König
The header specifies GPL version 2 only, so make the MODULE_LICENSE string use the respective string for that. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-11watchdog: asm9260: remove __init and __exit annotationsArnd Bergmann
The probe and release functions in this driver are marked as __init and __exit, but this is wrong as indicated by this Kbuild error message: WARNING: vmlinux.o(.data+0x1d2308): Section mismatch in reference from the variable asm9260_wdt_driver to the function .init.text:asm9260_wdt_probe() This removes the annotations, to make the sysfs unbind attribute and deferred probing work. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aae03dc98177 ("watchdog: add Alphascale asm9260-wdt driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-11watchdog: Drop pointer to watchdog device from struct watchdog_deviceGuenter Roeck
The lifetime of the watchdog device pointer is different from the lifetime of its character device. Remove it entirely to avoid race conditions. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-11watchdog: ziirave: Use watchdog infrastructure to create sysfs attributesGuenter Roeck
The watchdog core now supports creating driver specific sysfs attributes when creating the watchdog device. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-11watchdog: Add support for creating driver specific sysfs attributesGuenter Roeck
The Zodiac watchdog driver attaches additional sysfs attributes to the watchdog device. This has a number of problems: The watchdog device lifetime differs from the driver lifetime, and the device structure should therefore not be accessed from drivers. Also, creating sysfs attributes after driver registration results in a potential race condition if user space expects the attributes to exist but they don't exist yet. Add support for creating driver specific sysfs attributes to the watchdog core to solve the problems. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-11watchdog: stmp3xxx: Remove unused variablesFabio Estevam
Commit 8d2fa17151ea3 ("watchdog: stmp3xxx: Stop the watchdog on system halt") introduced the following build warning: drivers/watchdog/stmp3xxx_rtc_wdt.c: In function 'wdt_notify_sys': drivers/watchdog/stmp3xxx_rtc_wdt.c:78:29: warning: unused variable 'pdata' [-Wunused-variable] Remove the unused 'pdata' and 'dev' variables. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-01-09watchdog: add MT7621 watchdog supportJohn Crispin
This patch adds support for the watchdog core found on newer MediaTek Wifi SoCs MT7621 and MT7628. There is no symbol for MT7628 as it is a subtype of MT7620 so we depend on that instead. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-29watchdog: da9055_wdt: Drop reference countingGuenter Roeck
Reference counting is now implemented in the watchdog core and no longer required in watchdog drivers. Since it was implememented a no-op, and since the local memory is allocated with devm_kzalloc(), the reference counting code in the driver really did not really work anyway, and this patch effectively fixes a bug which could cause a crash on unloading if the watchdog device was still open. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-29watchdog: da9052_wdt: Drop reference countingGuenter Roeck
Reference counting is now implemented in the watchdog core and no longer required in watchdog drivers. Since it was implememented a no-op, and since the local memory is allocated with devm_kzalloc(), the reference counting code in the driver really did not really work anyway, and this patch effectively fixes a bug which could cause a crash on unloading if the watchdog device was still open. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-29watchdog: Separate and maintain variables based on variable lifetimeGuenter Roeck
All variables required by the watchdog core to manage a watchdog are currently stored in struct watchdog_device. The lifetime of those variables is determined by the watchdog driver. However, the lifetime of variables used by the watchdog core differs from the lifetime of struct watchdog_device. To remedy this situation, watchdog drivers can implement ref and unref callbacks, to be used by the watchdog core to lock struct watchdog_device in memory. While this solves the immediate problem, it depends on watchdog drivers to actually implement the ref/unref callbacks. This is error prone, often not implemented in the first place, or not implemented correctly. To solve the problem without requiring driver support, split the variables in struct watchdog_device into two data structures - one for variables associated with the watchdog driver, one for variables associated with the watchdog core. With this approach, the watchdog core can keep track of its variable lifetime and no longer depends on ref/unref callbacks in the driver. As a side effect, some of the variables originally in struct watchdog_driver are now private to the watchdog core and no longer visible in watchdog drivers. As a side effect of the changes made, an ioctl will now always fail with -ENODEV after a watchdog device was unregistered with the character device still open. Previously, it would only fail with -ENODEV in some situations. Also, ioctl operations are now atomic from driver perspective. With this change, it is now guaranteed that the driver will not unregister a watchdog between a timeout change and the subsequent ping. The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer used and marked as deprecated. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-29watchdog: diag288: Stop re-using watchdog core internal flagsGuenter Roeck
A watchdog driver should not use watchdog subsystem internal flags. Use a driver variable and flag instead to maintain the watchdog state and to determine if a suspend operation is possible or not. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-29watchdog: Create watchdog device in watchdog_dev.cGuenter Roeck
The watchdog character device is currently created in watchdog_dev.c, and the watchdog device in watchdog_core.c. This results in cross-dependencies, since device creation needs to know the watchdog character device number as well as the watchdog class, both of which reside in watchdog_dev.c. Create the watchdog device in watchdog_dev.c to simplify the code. Inspired by earlier patch set from Damien Riegel. Cc: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_deviceGuenter Roeck
The 'dev' pointer in struct watchdog_device is set by the watchdog core when registering the watchdog device and not by the driver. It points to the watchdog device, not its parent. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: mena21: Do not use device pointer from struct watchdog_deviceGuenter Roeck
The device pointer in struct watchdog_device has a different lifetime than the driver code and should not be used in drivers. Use the pointer to the parent device instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: gpio: Do not use device pointer from struct watchdog_deviceGuenter Roeck
The device pointer in struct watchdog_device has a different lifetime than the driver code and should not be used in drivers. Use the pointer to the parent device instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: tangox: Print info message using pointer to platform deviceGuenter Roeck
The device pointer in struct watchdog_device should not be used by drivers and may be removed in the near future. Use the platform device pointer for info messages instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: bcm2835_wdt: Drop log message if watchdog is stoppedGuenter Roeck
Stopping a watchdog is a normal operation and does not warrant a log message. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: add support for Sigma Designs SMP86xx/SMP87xxMans Rullgard
This adds support for the Sigma Designs SMP86xx/SMP87xx family built-in watchdog. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: Zodiac Aerospace RAVE Switch Watchdog Processor DriverMartyn Welch
This patch adds a driver for the Zodiac Aerospace RAVE Watchdog Procesor. This device implements a watchdog timer, accessible over I2C. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: add Alphascale asm9260-wdt driverOleksij Rempel
Add WD support for Alphascale asm9260 SoC. This driver provide support for different function modes: - HW mode to trigger SoC reset on timeout - SW mode do soft reset if needed - DEBUG mode Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: ts4800: add driver for TS-4800 watchdogDamien Riegel
This watchdog is instantiated in a FPGA that is memory mapped. It is made of only one register, called the feed register. Writing to this register will re-arm the watchdog for a given time (and enable it if it was disable). It can be disabled by writing a special value into it. It is part of a syscon block, and the watchdog register offset in this block varies from board to board. This offset is passed in the syscon property after the phandle to the syscon node. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: atlas7: add watchdog driver of CSRatlas7Guo Zeng
This patch adds watchdog driver for CSRatlas7 platform. On CSRatlas7, the 6th timer can act as a watchdog timer when the Watchdog mode is enabled. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: William Wang <William.Wang@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: meson: Add meson8b SoC specific dataCarlo Caione
Add SoC specific data in the watchdog driver for the meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: meson: Enable meson SoC specific dataCarlo Caione
With this patch we refactor the driver code to enable watchdog support for all platforms based on Amlogic meson SoCs. The new default timeout is also now chosen considering the maximum timeout allowed by the SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-28watchdog: hpwdt: HP rebrandingMingarelli, Thomas
This patch is for the rebranding changes for the corporate split at HP. There are no functional changes with this patch. Signed-off-by: Tom Mingarelli <thomas.mingarelli@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: cadence_wdt: use to_platform_device()Geliang Tang
Use to_platform_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: omap: don't disable the timer when it should be enabled earlyUwe Kleine-König
With the early_enable module parameter the watchdog can be started during driver probe time. If this is requested the bets are good that the timer is already running, so to narrow the gap where the timer is disabled only call the disable function when the timer shouldn't be started. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: omap: don't disable runtime pm before starting deviceUwe Kleine-König
omap_wdt_start calls pm_runtime_get_sync so dropping a reference just before calling omap_wdt_start doesn't make much sense. Moreover there is no point to use the synchronous variant of pm_runtime_put because the driver doesn't care if the clock is disabled before or after omap_wdt_probe returns. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: dw_wdt: fix signedness bug in dw_wdt_top_in_seconds()Jisheng Zhang
On 64bit platforms, "(1 << (16 + top)) / clk_get_rate(dw_wdt.clk)" is sign-extended to 64bit then converted to unsigned 64bit, finally divide the clk rate. If the top is the maximum TOP i.e 15, "(1 << (16 +15))" will be sign-extended to 0xffffffff80000000, then converted to unsigned 0xffffffff80000000, which is a huge number, thus the final result is wrong. We fix this issue by giving usigned value(1U in this case) at first. Let's assume clk rate is 25MHZ, Before the patch: dw_wdt_top_in_seconds(15) = -864612050 After the patch: dw_wdt_top_in_seconds(15) = 85 Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: refuse to unload softdog module when its timer is runningLi RongQing
the softdog has static variables which are accessed if its timer is still running after the driver is unloaded. and lead to crash: $modprobe softdog $echo 1 >/dev/watchdog $modprobe -r softdog CPU 20 Unable to handle kernel paging request at virtual address Oops[#1]: CPU: 20 PID: 0 Comm: swapper/20 Not tainted 4.1.13-WR8.0.0.0_standard ... Modules linked in: [last unloaded: softdog] .... Call Trace: [<ffffffff801e142c>] cascade+0x34/0xb0 [<ffffffff801e1964>] run_timer_softirq+0x30c/0x368 [<ffffffff80181044>] __do_softirq+0x1ec/0x418 [<ffffffff801815d0>] irq_exit+0x90/0x98 [<ffffffff8010749c>] plat_irq_dispatch+0xa4/0x140 [<ffffffff80152740>] ret_from_irq+0x0/0x4 [<ffffffff801529e0>] __r4k_wait+0x20/0x40 [<ffffffff801c2278>] cpu_startup_entry+0x2a0/0x368 [<ffffffff8015fa64>] start_secondary+0x444/0x4d8 add the module ref when timer is running to avoid to unload the softdog module Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: stmp3xxx: Stop the watchdog on system haltHarald Geyer
This allows the system to actually halt even if userspace forgot to disable the watchdog first. Old behaviour was that the watchdog forced the system to boot again. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27sp5100_tco: fix the device check for SB800 and later chipsetsHuang Rui
For SB800 and later chipsets, the register definitions are the same with SB800. And for SB700 and older chipsets, the definitions should be same with SP5100/SB7x0. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Denis Turischev <denis.turischev@compulab.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27sp5100_tco: Add AMD Carrizo platform supportHuang Rui
sp5100_tco watchdog is also supported on AMD KernCZ chipset of Carrizo platform. Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Denis Turischev <denis.turischev@compulab.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27sp5100_tco: Add AMD Mullins platform supportDenis Turischev
AMD Mullins watchdog is fully compatible to the previous Hudson chipset, reuse the existent sp5100_tco driver. Signed-off-by: Denis Turischev <denis.turischev@compulab.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: Read device status through sysfs attributesPratyush Anand
This patch adds following attributes to watchdog device's sysfs interface to read its different status. * state - reads whether device is active or not * identity - reads Watchdog device's identity string. * timeout - reads current timeout. * timeleft - reads timeleft before watchdog generates a reset * bootstatus - reads status of the watchdog device at boot * status - reads watchdog device's internal status bits * nowayout - reads whether nowayout feature was set or not Testing with iTCO_wdt: # cd /sys/class/watchdog/watchdog1/ # ls bootstatus dev device identity nowayout power state subsystem timeleft timeout uevent # cat identity iTCO_wdt # cat timeout 30 # cat state inactive # echo > /dev/watchdog1 # cat timeleft 26 # cat state active # cat bootstatus 0 # cat nowayout 0 Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-27watchdog: Use static struct class watchdog_class in stead of pointerPratyush Anand
We need few sysfs attributes to know different status of a watchdog device. To do that, we need to associate .dev_groups with watchdog_class. So convert it from pointer to static. Putting this static struct in watchdog_dev.c, so that static device attributes defined in that file can be attached to it. Signed-off-by: Pratyush Anand <panand@redhat.com> Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: w83627hf_wdt: use core reboot notifierDamien Riegel
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: softdog: use core reboot notifierDamien Riegel
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: gpio_wdt: use core reboot notifierDamien Riegel
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Note that this watchdog used to stop unconditionnaly on SYS_HALT and SYS_POWER_OFF. The core function now calls ops->stop on SYS_HALT and SYS_DOWN. To prevent the watchdog from being stopped on reboot, the "always-running" property must be set, otherwise it will now be stopped. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: cadence_wdt: use core reboot notifierDamien Riegel
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: bcm47xx_wdt: use core reboot notifierDamien Riegel
Get rid of the custom reboot notifier block registration and use the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirlinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: core: add reboot notifier supportDamien Riegel
Many watchdog drivers register a reboot notifier in order to stop the watchdog on system reboot. Thus we can factorize this code in the watchdog core. For that purpose, a new notifier block is added in watchdog_device for internal use only, as well as a new watchdog_stop_on_reboot helper function. If this helper is called, watchdog core registers the related notifier block and will stop the watchdog when SYS_HALT or SYS_DOWN is received. Since this operation can be critical on some platforms, abort the device registration if the reboot notifier registration fails. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: sunxi_wdt: use core restart handlerDamien Riegel
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>