summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2010-09-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
2010-09-25Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-25ARM: pxa168fb: clear enable bit when not activeHaojian Zhuang
While fb isn't active, we should clear CFG_GRA_ENA bit. The existing code can't clear this bit. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-22drivers/video/sis/sis_main.c: prevent reading uninitialized stack memoryDan Rosenberg
The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "reserved" member of the fb_vblank struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-22fbcon: fix lockdep warning from fbcon_deinit()Jarek Poplawski
Fix the lockdep warning: [ 13.657164] INFO: trying to register non-static key. [ 13.657169] the code is fine but needs lockdep annotation. [ 13.657171] turning off the locking correctness validator. [ 13.657177] Pid: 622, comm: modprobe Not tainted 2.6.36-rc3c #8 [ 13.657180] Call Trace: [ 13.657194] [<c13002c8>] ? printk+0x18/0x20 [ 13.657202] [<c1056cf6>] register_lock_class+0x336/0x350 [ 13.657208] [<c1058bf9>] __lock_acquire+0x449/0x1180 [ 13.657215] [<c1059997>] lock_acquire+0x67/0x80 [ 13.657222] [<c1042bf1>] ? __cancel_work_timer+0x51/0x230 [ 13.657227] [<c1042c23>] __cancel_work_timer+0x83/0x230 [ 13.657231] [<c1042bf1>] ? __cancel_work_timer+0x51/0x230 [ 13.657236] [<c10582b2>] ? mark_held_locks+0x62/0x80 [ 13.657243] [<c10b3a2f>] ? kfree+0x7f/0xe0 [ 13.657248] [<c105853c>] ? trace_hardirqs_on_caller+0x11c/0x160 [ 13.657253] [<c105858b>] ? trace_hardirqs_on+0xb/0x10 [ 13.657259] [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0 [ 13.657263] [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0 [ 13.657268] [<c1042dea>] cancel_work_sync+0xa/0x10 [ 13.657272] [<c117f444>] fbcon_deinit+0xe4/0x1e0 ... The warning is caused by trying to cancel an uninitialized work from fbcon_exit(). Fix it by adding a check for queue.func, similarly to other places in this code. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-22efifb: support the EFI framebuffer on more Apple hardwareLuke Macken
Enable the EFI framebuffer on 14 more Macs, including the iMac11,1 iMac10,1 iMac8,1 Macmini3,1 Macmini4,1 MacBook5,1 MacBook6,1 MacBook7,1 MacBookPro2,2 MacBookPro5,2 MacBookPro5,3 MacBookPro6,1 MacBookPro6,2 and MacBookPro7,1 Information gathered from various user submissions. https://bugzilla.redhat.com/show_bug.cgi?id=528232 http://ubuntuforums.org/showthread.php?t=1557326 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Luke Macken <lmacken@redhat.com> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-22efifb: check that the base address is plausible on pci systemsPeter Jones
Some Apple machines have identical DMI data but different memory configurations for the video. Given that, check that the address in our table is actually within the range of a PCI BAR on a VGA device in the machine. This also fixes up the return value from set_system(), which has always been wrong, but never resulted in bad behavior since there's only ever been one matching entry in the dmi table. The patch 1) stops people's machines from crashing when we get their display wrong, which seems to be unfortunately inevitable, 2) allows us to support identical dmi data with differing video memory configurations This also adds me as the efifb maintainer, since I've effectively been acting as such for quite some time. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-16Merge branch '2.6.36-fixes' of git://github.com/schandinat/linux-2.6Linus Torvalds
* '2.6.36-fixes' of git://github.com/schandinat/linux-2.6: drivers/video/via/ioctl.c: prevent reading uninitialized stack memory
2010-09-15drivers/video/via/ioctl.c: prevent reading uninitialized stack memoryDan Rosenberg
The VIAFB_GET_INFO device ioctl allows unprivileged users to read 246 bytes of uninitialized stack memory, because the "reserved" member of the viafb_ioctl_info struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-08-30ARM: pxa168fb: fix section mismatchMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-20matroxfb: fix incorrect use of memcpy_toio()Ondrej Zary
Screen is completely corrupted since 2.6.34. Bisection revealed that it's caused by commit 6175ddf06b61720 ("x86: Clean up mem*io functions."). H. Peter Anvin explained that memcpy_toio() does not copy data in 32bit chunks anymore on x86. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Jean Delvare <khali@linux-fr.org> Cc: <stable@kernel.org> [2.6.34.x, 2.6.35.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17VIDEO: amba clcd: don't disable an already disabled clockRussell King
Fix the clock enable/disable tracking in the AMBA CLCD driver so that the driver doesn't try to disable an already disabled clock, thereby causing the clock (if shared) to become unbalanced. This resolves a problem with CLCD on LPC32xx ARM platforms. Reported-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-12Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: I2C bus multiplexer driver pca954x i2c: Multiplexed I2C bus core support i2c: Use a separate mutex for userspace client lists i2c: Make i2c_default_probe self-sufficient i2c: Drop dummy variable i2c: Move adapter locking helpers to i2c-core V4L/DVB: Use custom I2C probing function mechanism i2c: Add support for custom probe function i2c-dev: Use memdup_user i2c-dev: Remove unnecessary kmalloc casts
2010-08-12Merge branch 'params' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits) param: don't deref arg in __same_type() checks param: update drivers/acpi/debug.c to new scheme param: use module_param in drivers/message/fusion/mptbase.c ide: use module_param_named rather than module_param_call param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes. param: lock myri10ge_fw_name against sysfs changes. param: simple locking for sysfs-writable charp parameters param: remove unnecessary writable charp param: add kerneldoc to moduleparam.h param: locking for kernel parameters param: make param sections const. param: use free hook for charp (fix leak of charp parameters) param: add a free hook to kernel_param_ops. param: silence .init.text references from param ops Add param ops struct for hvc_iucv driver. nfs: update for module_param_named API change AppArmor: update for module_param_named API change param: use ops in struct kernel_param, rather than get and set fns directly param: move the EXPORT_SYMBOL to after the definitions. ...
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-11i2c: Add support for custom probe functionJean Delvare
The probe method used by i2c_new_probed_device() may not be suitable for all cases. Let the caller provide its own, optional probe function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-11Merge branch 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: video: msm: Fix section mismatch in mddi.c. drivers: video: msm: drop some unused variables
2010-08-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits) ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} ARM: 6324/1: cam60: move cam60_spi_devices to .init.data ARM: 6322/1: imx/pca100: Fix name of spi platform data ARM: 6321/1: fix syntax error in main Kconfig file ARM: 6297/1: move U300 timer to dynamic clock lookup ARM: 6296/1: clock U300 intcon and timer properly ARM: 6295/1: fix U300 apb_pclk split ARM: 6306/1: fix inverted MMC card detect in U300 ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID ARM: 6294/1: etm: do a dummy read from OSSRR during initialization ARM: 6292/1: coresight: add ETM management registers ARM: 6288/1: ftrace: document mcount formats ARM: 6287/1: ftrace: clean up mcount assembly indentation ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR" ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h> ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3 ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig ARM: S5PV210: Override FIMC driver name on Aquila board ARM: S5PC100: enable FIMC on SMDKC100 ... Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to different subsystem 'setname' calls, and trivial port types in include/linux/serial_core.h
2010-08-11drivers/video/igafb.c: make igafb_setup() and igafb_init() staticAndrew Morton
Cc: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/video/igafb.c: introduce lost 'return'Kulikov Vasiliy
If iga_init() fails, code releases resources and continues to use it. It seems that after releasing resources 'return' should be. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11fbmem: VM_IO set, but not propagatedDaniel De Graaf
When we setup up the VMA flags for the mmap flag and we end up using the fallback mmap functionality we set the vma->vm_flags |= VM_IO. However we neglect to propagate the flag to the vma->vm_page_prot. This bug was found when Linux kernel was running under Xen. In that scenario, any page that has VM_IO flag to it, means that it MUST be a MMIO/VRAM backend memory , _not_ System RAM. That is what the fbmem.c does: sets VM_IO, ioremaps the region - everything is peachy. Well, not exactly. The vm_page_prot does not get the relevant PTE flags set (_PAGE_IOMAP) which under Xen is a death-kneel to pages that are referencing real physical devices but don't have that flag set. This patch fixes this. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Tested-by: Eamon Walsh <ewalsh@tycho.nsa.gov> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: automatically calculate pixel clock when none is givenMaurus Cuelenaere
Add a simple algorithm which calculates the pixel clock based on the video mode parameters. This is only done when no pixel clock is supplied through the platform data. This allows drivers to omit the pixel clock data and thus share the algorithm used for calculating it. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Tested-by: Donghwa Lee <yiffie9819@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add support for DMA channel control on S5PV210Pawel Osciak
S5PV210 SoCs allow enabling/disabling DMA channels per window. For a window to display data from framebuffer memory, its channel has to be enabled. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: fix section mismatchMarek Szyprowski
This patch fixes the following section mismatch errors: WARNING: vmlinux.o(.data+0x20b40): Section mismatch in reference from the variable s3c_fb_driver_ids to the (unknown reference) .devinit.data:(unknown) The variable s3c_fb_driver_ids references the (unknown reference) __devinitdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x20b58): Section mismatch in reference from the variable s3c_fb_driver_ids to the (unknown reference) .devinit.data:(unknown) The variable s3c_fb_driver_ids references the (unknown reference) __devinitdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x20b70): Section mismatch in reference from the variable s3c_fb_driver_ids to the (unknown reference) .devinit.data:(unknown) The variable s3c_fb_driver_ids references the (unknown reference) __devinitdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: protect window-specific registers during updatesPawel Osciak
Newer hardware (S3C6410, S5P) have the ability to block updates from shadow registers during reconfiguration. Add protect calls for set_par and clear protection when resetting. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: correct window osd size and alpha register handlingPawel Osciak
S3C64xx and S5P OSD registers for OSD size and alpha are as follows: VIDOSDC: win 0 - size, win 1-4: alpha VIDOSDD: win 1-2 - size; not present for windows 0, 3 and 4 Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add SHADOWCON shadow register locking support for S5PV210Pawel Osciak
S5PV210 allows per-window locking of register value updates from shadow registers. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: window 3 of 64xx+ does not have an osd_d registerPawel Osciak
Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add wait for VSYNC ioctlPawel Osciak
Add VSYNC interrupt support and an ioctl that allows waiting for it. Interrupts are turned on only when needed. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add support for display panningPawel Osciak
Supports all bpp modes. The PRTCON register is used to disable in-hardware updates of registers that store start and end addresses of framebuffer memory. This prevents display corruption in case we do not make it before VSYNC with updating them atomically. With this feature there is no need to wait for a VSYNC interrupt before each such update. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: separate S5PC100 and S5PV210 framebuffer driver data structuresPawel Osciak
S5PC100 and S5PV210 framebuffer devices differ slightly in terms of available registers and their driver data structures have to be separate. Those differences include dissimilar ways to control shadow register updates. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: fix various null references on framebuffer memory alloc failurePawel Osciak
The following problems were found in the above situation: sfb->windows[win] was being assigned at the end of s3c_fb_probe_win only. This resulted in passing a NULL to s3c_fb_release_win if probe_win returned early and a memory leak. dma_free_writecombine does not allow its third argument to be NULL. fb_dealloc_cmap does not verify whether its argument is not NULL. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: integrate palette setup code into main driverBen Dooks
Remove the palette setup code from the header files and put it into the main driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: udpate to support s3c2416/s3c2443 style hardwareBen Dooks
Update the variant and window variant structures with the necessary changes to support the older style of hardware where these are not in the same place. Add the support for the s3c2443/s3c2416 hardware by using the platform-device s3c2443 to cover both, and add the initialisation data for these. Also change to including just the v4 header files for the moment until the last of the merging of these is sorted out. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: initial move to unifying the header filesBen Dooks
Remove the various header files that configure this driver and use the platform device name to select the correct configuration at probe time. Currently this does not remove the header files, only updates the driver and the relevant platform files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: only init window colour key controls for windows with blendingBen Dooks
The driver clears all windows, but also sets the windows' colour key controls at the same time. However, the last window does not have these registers as it is always blended into the previous window. Move the colour key initialisation into the probe, and run it for only nr_win-1 windows. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: fix distortedness situation for the mode more then 24bppInKi Dae
It has been working fine at 16bpp but in case of pixel format more then 24bpp it would occur distortedness situation on that mode. so this patch set the word swap control bit of WINCONx to 1 as default value. but it should be set to 0 in case that each ENLOCAL bit of WINCON0 ~ 2 registers is enabled. this issue would be solved with local path feature soon. Signed-off-by: InKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add default window feature.InKi Dae
s5pv210 has five window layers (window0 ~ 4), among them, window0 ~ 2 could be used for local path with fimc(capture device) and fimd writeback feature so this patch makes default window layer for UI to be set at machine code. Signed-off-by: InKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: change to depending on CONFIG_S3C_FB_DEVBen Dooks
As suggested by Marek Szyprowski, we should make the driver depend on the configuration currently being used to build the platform device into the kernel. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/video/fbmem.c: simplify strlen()==0 check in fb_get_options()Denys Vlasenko
Replaced !strlen(str) check with !str[0]. Removed the variable which was used solely to store strlen result. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11fbcon: uninline four foo_update_attr() functionsDenys Vlasenko
This patch uninlines four similar functions, foo_update_attr(), in four fbcon-related files. These functions contain loops, two of theam have _nested_ loops, and they have more than one callsite each. I think they should not be inlined. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11fbcon: uninline large static function get_color()Denys Vlasenko
This function's body is good two screenfuls and it has six callsites. No apparent reason why it is marked inline. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11fbdev: efifb: section fixesHenrik Kretzschmar
Remove 43 section mismatches by moving the two structures efifb_defined and efifb_fix from .init.data to .devinit.data. Also the two structure arrays dmi_system_table[] and dmi_list[] have been moved from .data to .init.rodata and .init.data, which saves, if built-in, some space. On x86_64 'size -A' showed that these sections changed size: efifb.o: section size-old size-new .data 1200 688 .init.data 7840 512 .init.rodata 0 7568 .devinit.data 0 256 Total 11927 11911 Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Cc: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11param: simple locking for sysfs-writable charp parametersRusty Russell
Since the writing to sysfs can free the old one, we need to block that when we access the charp variables. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Jing Huang <huangj@brocade.com> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: David S. Miller <davem@davemloft.net> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-usb@vger.kernel.org
2010-08-11param: use ops in struct kernel_param, rather than get and set fns directlyRusty Russell
This is more kernel-ish, saves some space, and also allows us to expand the ops without breaking all the callers who are happy for the new members to be NULL. The few places which defined their own param types are changed to the new scheme (more which crept in recently fixed in following patches). Since we're touching them anyway, we change get() and set() to take a const struct kernel_param (which they really are). This causes some harmless warnings until we fix them (in following patches). To reduce churn, module_param_call creates the ops struct so the callers don't have to change (and casts the functions to reduce warnings). The modern version which takes an ops struct is called module_param_cb. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Michal Januszewski <spock@gentoo.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-kernel@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-fbdev-devel@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org
2010-08-10Merge branches 'master' and 'devel' into for-linusRussell King
Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
2010-08-10ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICEEric Bénard
From: Eric Bénard <eric@eukrea.com> This fixes the following build failure: drivers/built-in.o: In function `imxfb_probe': mxcmmc.c:(.init.text+0xd04): undefined reference to `backlight_device_register' drivers/built-in.o: In function `imxfb_remove': mxcmmc.c:(.devexit.text+0x44): undefined reference to `backlight_device_unregister' that was introduced by 7a2bb23 (imxfb: add pwmr controlled backlight support) Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10tty: fix console_sem lock orderArnd Bergmann
vgacon_do_font_op releases and reacquires the BTM while holding console_sem. This violates the rule that BTM has to be the outer lock whenever we hold both. There does not seem to be any reason to give up the BTM here, so just stop doing that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10tty: replace BKL with a new tty_lockArnd Bergmann
As a preparation for replacing the big kernel lock in the TTY layer, wrap all the callers in new macros tty_lock, tty_lock_nested and tty_unlock. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10vt/console: try harder to print output when panicingJesse Barnes
Jesse's initial patch commit said: "At panic time (i.e. when oops_in_progress is set) we should try a bit harder to update the screen and make sure output gets to the VT, since some drivers are capable of flipping back to it. So make sure we try to unblank and update the display if called from a panic context." I've enhanced this to add a flag to the vc that console layer can set to indicate they want this behaviour to occur. This also adds support to fbcon for that flag and adds an fb flag for drivers to indicate they want to use the support. It enables this for KMS drivers. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 01:00:30 +0000