summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2010-08-03OMAP: DSS2: Taal: CABC workaround is Taal specificJani Nikula
Prepare for supporting panels other than Taal in this driver. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Add regulator configuration supportTomi Valkeinen
Add support for configuring regulators in the panel specific configuration data. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Print panel name in addition to revisionJani Nikula
The driver will support other panels in addition to Taal, print also the name. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Add panel specific configuration structureJani Nikula
Add a structure for panel specific configration to be able to support more than one panel in the future. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Configure ESD check in DSI panel dataJani Nikula
Make ESD check usage configurable in DSI panel data, as opposed to a define. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Use Nokia DSI panel dataTomi Valkeinen
Get board specific information from the Nokia DSI panel data structure instead of the DSS. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Add proper external TE supportJani Nikula
Add gpio irq based external TE support with timeout. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Change probe error handling labelsJani Nikula
Switch from numbered to named labels to make it easier to add new labels for error handling. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Change ESD work managementJani Nikula
Move ESD work queuing and cancelling out of taal_power_on/off() to avoid problems related to taal_esd_work() calling the power on/off functions. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Check taal_power_on() return value in taal_resume()Jani Nikula
Change state only if power on was succesful. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Change DSI bus locking to avoid deadlock in ESD workJani Nikula
Move dsi_bus_lock/unlock() out of taal_power_on/off() to avoid deadlock in taal_esd_work(). Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Ensure panel is enabled in enable_te() and run_test()Jani Nikula
Bail out from taal_enable_te() and taal_run_test() if panel is not enabled. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Improve taal_power_on() error handlingJani Nikula
Check return values and bail out on errors. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Remove ESD work cancel from driver probe error handlingJani Nikula
ESD work is never queued in probe, no need to cancel it on probe error. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Fix request_irq() error handlingJani Nikula
Separate gpio_request() and request_irq() error handling. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Remove platform enable/disableJani Nikula
After the addition of proper hardware reset, taal_hw_reset(), there's no need for an additional platform enable/disable. Remove them. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Add locks to protect taal data accessJani Nikula
Avoid potential race conditions in sysfs access to taal data. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: Add panel hardware resetJani Nikula
Issue a proper reset pulse on the reset line instead of just doing power on/off. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Taal: add locks to taal_bl_update_statusTomi Valkeinen
taal_bl_update_status was missing locks to protect taal_data. This caused a kernel crash randomly, as the code attempted to set the brightness while the OMAP's DSI block was actually disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: change DSI timeout functionsTomi Valkeinen
Using nanoseconds as arguments to functions that set the DSI timeouts was perhaps not so good idea. The timeouts are based on different DSI clocks, so the possible range for the timeouts vary greatly depending on the clocks. Also, the multipliers used with the timeouts cause big gaps in the timeout range, meaning that the nanosecond based functions could cause the timeout to be quite far from the intended value. This patch changes the functions to take the plain tick values with the multiplier enable/disable bits, and sets the TA/LP_RX/HS_TX timeouts to maximum. While the timeouts could be much lower, the fact is that when TA/LP_RX/HS_TX timeout happens, we are in an error situation and not in a hurry anyway. STOP_STATE_COUNTER is a different matter, but it is only used at initialization time, and won't normally affect the performance. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: handle error in synchronous writeTomi Valkeinen
Check if the peripheral answered something, and if so, dump the data and return an error. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: change dsi_vc_dcs_read_2 parametersTomi Valkeinen
Change dsi_vc_dcs_read_2() data parameter to two u8 parameters to make the byte-order clear. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: use a private workqueueTomi Valkeinen
Using the shared workqueue led to to a deadlock in the case where the display was unblanked via keyboard. What happens is something like this: - User presses a key context 1: - drivers/char/keyboard.c calls schedule_console_callback() - fb_unblank takes the console semaphore - dsi bus lock is taken, and frame transfer is started (dsi bus lock is left on) - Unblank code tries to set the panel backlight, which tries to take dsi bus lock, but is blocked while the frame transfer is going on context 2, shared workqueue, console_callback in drivers/char/vt.c: - Tries to take console semaphore - Blocks, as console semaphore is being held by context 1 - No other shared workqueue work can be run context 3, HW irq, caused by FRAMEDONE interrupt: - Interrupt handler schedules framedone-work in shared workqueue - Framedone-work is never ran, as the shared workqueue is blocked. This means that the unblank thread stays blocked, which means that context 2 stays blocked. While I think the real problem is in keyboard/virtual terminal code, using a private workqueue in the DSI driver is perhaps safer and more robust than using the shared one. The DSI works should not be delayed more than a millisecond or so, and even if the private workqueue gives us no hard promise of doing so, it's still safer bet than the shared workqueue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: print errors in dsi_vc_flush_receive_data()Tomi Valkeinen
dsi_vc_flush_receive_data() is meant to dump data when something has gone wrong, and thus we should use DSSERR, not DSSDBG. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Add some locking debug checksVille Syrjälä
Trigger WARN_ON() messages from various places in the code in case the memory region is not currently locked. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Make lockdep happyVille Syrjälä
When more than one memory region needs to be lockd at the same time use the memory region id to fix the order in which the locks are taken. Also one needs to use the _nested() versions of the locking primitives. The memory region id can serve as the lock class there as well. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Convert the memory region locking to rwsemVille Syrjälä
R/W semaphore is a good fit for the memory region locking pattern. So use it. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Add locking for memory regionsVille Syrjälä
Add locking to the memory regions to make sure the memory region size won't be changed while some other piece of code is performing some checks or setup based on that information. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Add support for switching memory regionsVille Syrjälä
Separate the memory region from the framebuffer device a little bit. It's now possible to select the memory region used by the framebuffer device using the new mem_idx parameter of omapfb_plane_info. If the mem_idx is specified it will be interpreted as an index into the memory regions array, if it's not specified the framebuffer's index is used instead. So by default each framebuffer keeps using it's own memory region which preserves backwards compatibility. This allows cloning the same memory region to several overlays and yet each overlay can be controlled independently since they can be associated with separate framebuffer devices. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Skip unnecessary set_overlay_info()Ville Syrjälä
In omapfb_enable_overlay() if the overlay state is already what we want skip the set_overlay_info(). Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Check var even if there isn't memoryVille Syrjälä
If video memory hasn't been allocate have check_fb_var() still check most of the settings, just skip the ones involving the size of the memory region. Also skip the memory address calculations in omapfb_setup_overlay() if there's no memory. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Refactor overlay address calculationsVille Syrjälä
Split the overlay address calculations into their own function. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Fix update area calculations with multiple scaled overlaysTomi Valkeinen
When there are multiple scaled overlays simply checking whether the update area intersects any of them in order is not enough. If eg. VID1 starts out completely outside the update area but VID2 causes the update area to increase in such a way that VID1 now falls partially within the increased update area VID1 should be rechecked and the update area possibly increased even further to fully encompass VID1. So simply keep looping over the overlays until such time that none of the overlays caused the update area to change. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: clear spurious SYNC_LOST_DIGIT interruptsVille Syrjälä
When DSS transitions from off mode to on VENC may generate a spurious SYNC_LOST_DIGIT error. Just ack it when restoring the context. Also restore IRQENABLE last to avoid triggering interrupts before the context is fully restored. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Make wait_for_go() succeed for disabled displaysVille Syrjälä
When the display is not active make the wait_for_go() functions return immediately. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Check if display supports update mode changesVille Syrjälä
Check whether the display actually has the set_update_mode() function before calling it. Only the sysfs codepath was broken, the omapfb ioctl had the necessary protection. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: Increase HS TX timeoutTomi Valkeinen
For some reason screen updates of certain odd widths seem to be triggering HS TX timeouts on OMAP 3430, even if bigger updates do not. The reason for this is unknown, but increasing the timeout removes the problem with no (so far) noticeable problems. I haven't seen this problem on OMAP 3630. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-02V4L/DVB: drivers/video/omap2/displays: add missing mutex_unlockJulia Lawall
Add a mutex_unlock missing on the error paths. The use of the mutex is balanced elsewhere in the file. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * mutex_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * mutex_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02Merge branch 'devel-misc' into omap-for-linusTony Lindgren
2010-08-01of/xilinxfb: update tft compatible versionsAdrian Alonso
* Add tft display module compatibility for new hardware modules Signed-off-by: Adrian Alonso <aalonso00@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01powerpc/fsl-diu-fb: Support setting display mode using EDIDAnatolij Gustschin
Adds support for encoding display mode information in the device tree using verbatim EDID block. If the EDID entry in the DIU node is present, the driver will build mode database using EDID data and allow setting the display modes from this database. Otherwise display mode will be set using mode entries from driver's internal database as usual. This patch also updates device tree bindings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01powerpc/5121: shared DIU framebuffer supportAnatolij Gustschin
MPC5121 DIU configuration/setup as initialized by the boot loader currently will get lost while booting Linux. As a result displaying the boot splash is not possible through the boot process. To prevent this we reserve configured DIU frame buffer address range while booting and preserve AOI descriptor and gamma table so that DIU continues displaying through the whole boot process. On first open from user space DIU frame buffer driver releases the reserved frame buffer area and continues to operate as usual. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01powerpc/5121: move fsl-diu-fb.h to include/linuxAnatolij Gustschin
Some DIU structures will be used in platform code in subsequent MPC5121 DIU patch, so we move this header to be able to include it elsewhere. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptorAnatolij Gustschin
On MPC5121e Rev 2.0 re-configuring the DIU area descriptor by writing new descriptor address doesn't always work. As a result, DIU continues to display using old area descriptor even if the new one has been written to the descriptor register of the plane. Add the code from Freescale MPC5121EADS BSP for writing descriptor addresses properly. This fixes the problem for Rev 2.0 silicon. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01of/address: Clean up function declarationsGrant Likely
This patch moves the declaration of of_get_address(), of_get_pci_address(), and of_pci_address_to_resource() out of arch code and into the common linux/of_address header file. This patch also fixes some of the asm/prom.h ordering issues. It still includes some header files that it ideally shouldn't be, but at least the ordering is consistent now so that of_* overrides work. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-31Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/kernel/setup.c arch/arm/mm/init.c
2010-07-31Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', ↵Russell King
'pl', 'spear' and 'versatile' into devel
2010-07-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: cyber2000fb: fix console in truecolor modes cyber2000fb: fix machine hang on module load SA1111: Eliminate use after free ARM: Fix Versatile/Realview/VExpress MMC card detection sense ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt ARM: Add barriers to io{read,write}{8,16,32} accessors as well ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE ARM: 6272/1: Convert L2x0 to use the IO relaxed operations ARM: 6271/1: Introduce *_relaxed() I/O accessors ARM: 6275/1: ux500: don't use writeb() in uncompress.h ARM: 6270/1: clean files in arch/arm/boot/compressed/ ARM: Fix csum_partial_copy_from_user()
2010-07-30cyber2000fb: fix console in truecolor modesOndrej Zary
Return value was not set to 0 in setcolreg() with truecolor modes. This causes fb_set_cmap() to abort after first color, resulting in blank palette - and blank console in 24bpp and 32bpp modes. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30cyber2000fb: fix machine hang on module loadOndrej Zary
I was testing two CyberPro 2000 based PCI cards on x86 and the machine always hanged completely when the cyber2000fb module was loaded. It seems that the card hangs when some registers are accessed too quickly after writing RAMDAC control register. With this patch, both card work. Add delay after RAMDAC control register write to prevent hangs on module load. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 11:00:45 +0000