summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2011-07-04vesafb: fix memory leakDaniel J Blueman
When releasing framebuffer, free colourmap allocations. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24fbdev: amba: Link fb device to its parentLoïc Minier
Some pieces of userspace like debian-installer expect to find the fb0 driver name by readlink-ing /sys/class/graphics/fb0/device/driver but this was broken with amba-clcd as it sets up fb_info manually and missed the .device parent pointer. Signed-off-by: Loïc Minier <loic.minier@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24fsl-diu-fb: remove check for pixel clock rangesTimur Tabi
The Freescale DIU framebuffer driver defines two constants, MIN_PIX_CLK and MAX_PIX_CLK, that are supposed to represent the lower and upper limits of the pixel clock. These values, however, are true only for one platform clock rate (533MHz) and only for the MPC8610. So the actual range for the pixel clock is chip-specific, which means the current values are almost always wrong. The chance of an out-of-range pixel clock being used are also remote. Rather than try to detect an out-of-range clock in the DIU driver, we depend on the board-specific pixel clock function (e.g. p1022ds_set_pixel_clock) to clamp the pixel clock to a supported value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24udlfb: Correct sub-optimal resolution selection.William Katsak
The situation in which the problem occurred was with a Plugable UGA-2K-A connected to a Samsung EX2220X display. The driver indicates that 1920x1080 is a valid mode (the first mode available, in fact), but proceeds to set the framebuffer size to 1600x1200. The patch corrects what seems to be a logic error, regarding unsetting the FB_MISC_1ST_DETAIL flag, if the first (top/best) mode is invalid. The existing code unset the flag if ANY mode was invalid. Signed-off-by: William Katsak <william.katsak@alcatel-lucent.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24Merge branch 'common/fbdev-meram' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x into fbdev-fixes-for-linus
2011-06-24hecubafb: add module_put on error path in hecubafb_probe()Pavel Shved
In hecubafb_probe(), after a successful try_module_get, vzalloc may fail and make the hecubafb_probe return, but the module is not put on this error path. This patch adds an exit point that calls module_put in such situation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved <shved@ispras.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24sm501fb: fix section mismatch warningRandy Dunlap
Fix section mismatch warning in sm501fb: WARNING: drivers/video/sm501fb.o(.text+0x21d6): Section mismatch in reference from the function sm501fb_init_fb() to the variable .devinit.data:sm501_default_mode The function sm501fb_init_fb() references the variable __devinitdata sm501_default_mode. This is often because sm501fb_init_fb lacks a __devinitdata annotation or the annotation of sm501_default_mode is wrong. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24gx1fb: Fix section mismatch warningsRandy Dunlap
Fix a chain of section mismatches in geode driver, beginning with: WARNING: drivers/video/geode/gx1fb.o(.data+0x70): Section mismatch in reference from the variable gx1fb_driver to the function .init.text:gx1fb_probe() The variable gx1fb_driver references the function __init gx1fb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Making the changes that Paul pointed out resulted in a few more changes being needed, so they are all included here. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma planeDamian Hobson-Garcia
The check was intended to test if we have a valid pointer to write into, but it mistakenly checks the pointer contents instead. Since a valid pointer is mandatory for the chroma data if a YCbCr format is used, the pointer check has been removed. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-16Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x: fbdev: sh_mobile_hdmi: fix regression: statically enable RTPM fbdev/atyfb: Fix 2 defined-but-not-used warnings efifb: Fix call to wrong unregister function video: s3c-fb: move enabling channel for window video: s3c-fb: fix virtual resolution checking video: s3c-fb: fix misleading kfree in remove function
2011-06-15drivers/video/backlight/adp8870_bl.c: add missed props.type conversionAndrew Morton
Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15backlight: new driver for the ADP8870 backlight devicesMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15fbdev: sh_mobile_hdmi: fix regression: statically enable RTPMGuennadi Liakhovetski
A recent modification to the runtime PM code on mach-shmobile made a wrong RTPM implementation in the sh_mobile_hdmi driver apparent, which broke HDMI hotplug detection support on ap4evb. This patch does not implement a proper dynamic RTPM support for sh_mobile_hdmi, instead it restores the previous working state by statically enabling it. A more power-efficient solution should be implemented for the next kernel version. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14fbdev/atyfb: Fix 2 defined-but-not-used warningsGeert Uytterhoeven
If CONFIG_FB_ATY_BACKLIGHT=y but CONFIG_PCI=n: drivers/video/aty/atyfb_base.c:2272: warning: ‘aty_bl_exit’ defined but not used If CONFIG_ATARI=y for a modular build: drivers/video/aty/atyfb_base.c:2794: warning: ‘store_video_par’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14efifb: Fix call to wrong unregister functionWanlong Gao
platform_device_unregister() needs to unregister the device, not the driver. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Acked-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-09video: s3c-fb: move enabling channel for windowJingoo Han
This patch moves enabling channel for window, because there should be enabling channel before enabling window. If the sequence is reversed, it makes the problem in displaying images to lcd panel. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-09video: s3c-fb: fix virtual resolution checkingJingoo Han
This patch fixes mishandling in virtual resolution checking. Previously, virtual resolution is changed to virtual_x and virtual_y which mean the size for buffer allocation, when s3c_fb_check_var is called by fb_check_var. However, it is meaningless, since virtual_x and virtual_y are fixed and user cannot change virtual resolution. Therefore, virtual resolution should be more than resolution such as xres and yres. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-09video: s3c-fb: fix misleading kfree in remove functionJingoo Han
This patch fixes misleading kfree in remove function. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-06video: Fix use-after-free by vga16fb on rmmodBruno Prémont
Since fb_info is now refcounted and thus may get freed at any time it gets unregistered module unloading will try to unregister framebuffer as stored in platform data on probe though this pointer may be stale. Cleanup platform data on framebuffer release. CC: stable@kernel.org Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02video: Convert vmalloc/memset to vzallocJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02efifb: Disallow manual bind and unbindAndy Lutomirski
Both were buggy: bind would happily scribble over a real graphics device and unbind wouldn't destroy the framebuffer. Hotplugging efifb makes no sense anyway, so just disable it. As an added benefit, we save some runtime memory. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02efifb: Fix mismatched request/release_mem_regionAndy Lutomirski
Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02efifb: Enable write-combiningAndy Lutomirski
Running fbcon on an uncached framebuffer is remarkably slow. So try to enable write combining in efifb. Without this patch, it takes 5.8 seconds from efifb probe to i915 probe (default options; no plymouth or quiet mode). With this patch, it only takes 1.7 seconds. That means we wasted over 4 seconds just writing to UC memory. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02drivers/video/pxa168fb.c: add missing clk_putJulia Lawall
Add a label for error-handling code in the case where only clk_get has succeeded. Rename the label failed to be consistent with the rest. A simplified version of the semantic match that finds the missing clk_put is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02drivers/video/imxfb.c: add missing clk_putJulia Lawall
Reorder the labels at the end of the function to correspond to the order in which the resources are allocated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02fbdev: bf537-lq035: add missing blacklight properties typeSteven Miao
Seems this new field was missed, probably due to this driver being merged around the time this new backlight field was being added. At any rate, initial the type field to avoid ugly WARN() dumps. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02savagefb: Use panel CVT mode as defaultTormod Volden
If there is no EDID but an LCD panel is detected, generate a CVT mode from the panel resolution (at 60 Hz), and use this as a default mode instead of the hardcoded 800x600x8 mode. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-02fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.Paul Mundt
The LCDC driver does no longer compile: CC drivers/video/sh_mobile_meram.o CC drivers/video/sh_mobile_lcdcfb.o drivers/video/sh_mobile_lcdcfb.c: In function 'sh_mobile_lcdc_start': drivers/video/sh_mobile_lcdcfb.c:640:4: error: 'ret' undeclared (first use in this function) drivers/video/sh_mobile_lcdcfb.c:640:4: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [drivers/video/sh_mobile_lcdcfb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-26drivers/video/mb862xx/mb862xxfbdrv.c needs uaccess.hAndrew Morton
alpha allmodconfig: drivers/video/mb862xx/mb862xxfbdrv.c: In function 'mb862xxfb_ioctl': drivers/video/mb862xx/mb862xxfbdrv.c:323: error: implicit declaration of function 'copy_to_user' drivers/video/mb862xx/mb862xxfbdrv.c:327: error: implicit declaration of function 'copy_from_user' Cc: Paul Mundt <lethal@linux-sh.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/via: rename VIA local config struct basic_mmio_gpio: split into a gpio library and platform device gpio: remove some legacy comments in build files gpio: add trace events for setting direction and value gpio/pca953x: Use handle_simple_irq instead of handle_edge_irq gpiolib: export gpiochip_find gpio: remove redundant Kconfig depends on GPIOLIB basic_mmio_gpio: convert to non-__raw* accessors basic_mmio_gpio: support direction registers basic_mmio_gpio: support different input/output registers basic_mmio_gpio: detect output method at probe time basic_mmio_gpio: request register regions basic_mmio_gpio: allow overriding number of gpio basic_mmio_gpio: convert to platform_{get,set}_drvdata() basic_mmio_gpio: remove runtime width/endianness evaluation
2011-05-26Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits) regulator: Fix 88pm8607.c printk format warning input: Add support for Qualcomm PMIC8XXX power key input: Add Qualcomm pm8xxx keypad controller driver mfd: Add omap-usbhs runtime PM support mfd: Fix ASIC3 SD Host Controller Configuration size mfd: Fix omap_usbhs_alloc_children error handling mfd: Fix omap usbhs crash when rmmoding ehci or ohci mfd: Add ASIC3 LED support leds: Add ASIC3 LED support mfd: Update twl4030-code maintainer e-mail address mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0 mfd: Provide ab8500-core enumerators for chip cuts mfd: Check twl4030-power remove script error condition after i2cwrite mfd: Fix twl6030 irq definitions mfd: Add phoenix lite (twl6025) support to twl6030 mfd: Avoid to use constraint name in 88pm860x regulator driver mfd: Remove checking on max8925 regulator[0] mfd: Remove unused parameter from 88pm860x API mfd: Avoid to allocate 88pm860x static platform data ...
2011-05-26Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
2011-05-26mfd: Use mfd cell platform_data for 88pm860x cells platform bitsSamuel Ortiz
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26fb: Use platform_data to retrieve tmiofb platform bitsSamuel Ortiz
With the addition of the platform device mfd_cell pointer, we can now cleanly pass the sub device drivers platform data pointers through the regular device platform_data one, and get rid of mfd_get_data(). Cc: Ian Molton <spyro@f2s.com> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25video: mb862xx: udelay need linux/delay.hStephen Rothwell
Fix this: drivers/video/mb862xx/mb862xx-i2c.c: In function 'mb862xx_i2c_wait_event': drivers/video/mb862xx/mb862xx-i2c.c:25: error: implicit declaration of function 'udelay' caused by commit f8a6b1f44833 ("video: mb862xx: add support for controller's I2C bus adapter"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits) sh_mobile_meram: Safely disable MERAM operation when not initialized video: mb862xxfb: add support for L1 displaying video: mb862xx: add support for controller's I2C bus adapter video: mb862xxfb: relocate register space to get contiguous vram video: mb862xxfb: use pre-initialized configuration for PCI GDCs video: mb862xxfb: correct fix.smem_len field initialization video: s3c-fb: correct transparency checking in 32bpp video: s3c-fb: add gpio setup function to resume function fbdev/amifb: Remove superfluous alignment of frame buffer memory fbdev/amifb: Do not call panic() if there's not enough Chip RAM fbdev/amifb: Correct check for video memory size video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME video: s3c-fb: add window variant information for S5P video: s3c-fb: add additional validate bpps video: s3c-fb: correct window osd size offset values udlfb: include prefetch.h explicitly drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region drivers/video/sm501fb.c: Convert release_resource to release_mem_region drivers/video: Convert release_resource to release_mem_region video, udlfb: Fix two build warnings about 'ignoring return value' ...
2011-05-25drivers/video/backlight/adp5520_bl.c: check strict_strtoul() return valueLiu Yuan
It should check if strict_strtoul() succeeds. [akpm@linux-foundation.org: don't override strict_strtoul() return value] Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25Merge branch 'common/fbdev-meram' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
2011-05-25sh_mobile_meram: Safely disable MERAM operation when not initializedDamian
If the MERAM platform data is defined, but the MERAM has not been properly initaliazed we need to safely fall back to non-MERAM operation. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: mb862xxfb: add support for L1 displayingAnatolij Gustschin
Allow displaying L1 video data on top of the primary L0 layer. The L1 layer position and dimensions can be configured and the layer enabled/disabled by using the appropriate L1 controls added by this patch. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-05-24video: mb862xx: add support for controller's I2C bus adapterAnatolij Gustschin
Add adapter driver for I2C adapter in Coral-P(A)/Lime GDCs. So we can easily access devices on controller's I2C bus using i2c-dev interface. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-05-24video: mb862xxfb: relocate register space to get contiguous vramAnatolij Gustschin
By default the GDC registers are located in the middle of the 64MiB area for video RAM and registers. When 32MiB VRAM or more is used, relocate the register space to the top of the 64MiB space so that we get the contiguous VRAM for GDC frame buffer layers, drawing frames, capture and cursor buffers. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-05-24video: mb862xxfb: use pre-initialized configuration for PCI GDCsAnatolij Gustschin
If the bootloader has already initialized the display controller, do not re-initialize it in the driver. Take over the bootloader's configuration instead. This is already supported for non PCI GDCs Lime and Mint. Add this functionality for PCI GDCs Coral-P and Coral-PA. It is useful to avoid flicker and also avoids unneeded init delays while booting. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-05-24video: mb862xxfb: correct fix.smem_len field initializationAnatolij Gustschin
Initialize smem_len field to the actual frame buffer size and not to the whole video RAM size. This prevents overwriting other video memory (which could be used by other layers, cursors or accelerated drivers) by frame buffer applications relying on fix.smem_len. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-05-24video: s3c-fb: correct transparency checking in 32bppJingoo Han
32bpp means ARGB 8888 in the driver, therfore the transparency length and offset should be 8 and 24 respectively. However, the transparency length and offset were previously 0, which means that the driver supports RGB 888 without alpha blending when 32bpp is used. So, the transparency checking in 32bpp is corrected so that the transparency length and offset are 8 and 24 respectively. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: s3c-fb: add gpio setup function to resume functionJingoo Han
This patch adds gpio setup function to resume function to ensure gpio used by FIMD IP and LCD panel during a resume. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branch 'for_2.6.40/pm-cleanup' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-05-24fbdev/amifb: Remove superfluous alignment of frame buffer memoryGeert Uytterhoeven
amiga_chip_alloc() already aligns to the PAGE_SIZE Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev/amifb: Do not call panic() if there's not enough Chip RAMGeert Uytterhoeven
Fail gracefully instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev/amifb: Correct check for video memory sizeGeert Uytterhoeven
The check should compare the available memory size with the highest allocation value (VIDEOMEMSIZE_*_2M), not with the lowest value (VIDEOMEMSIZE_*_1M). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 10:25:33 +0000