summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2015-12-15fbdev: Make fb-notify a no-op if CONFIG_FB=nEzequiel Garcia
There's no point in having support for framebuffer notifications is CONFIG_FB is disabled. This commit adds the necessary stubs for code to link properly when CONFIG_FB=n and moves fb-notify.o to be built only when CONFIG_FB=y. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: Debug knob to register without holding console_lockDaniel Vetter
When the usual fbcon legacy options are enabled we have ->register_framebuffer ->fb notifier chain calls into fbcon ->fbcon sets up console on new fbi ->fbi->set_par ->drm_fb_helper_set_par exercises full kms api And because of locking inversion hilarity all of register_framebuffer is done with the console lock held. Which means that the first time on driver load we exercise _all_ the kms code (all probe paths and modeset paths for everything connected) is under the console lock. That means if anything goes belly-up in that big pile of code nothing ever reaches logfiles (and the machine is dead). Usual tactic to debug that is to temporarily remove those console_lock calls to be able to capture backtraces. I'm fed up writing this patch and recompiling kernels. Hence this patch here to add an unsafe, kernel-taining option to do this at runtime. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15video: fbdev: rivafb: unlock chip before probiding EDIDDmitry Eremin-Solenikov
At least NV3 requires for chip to be unlocked before it is possible to access I2C registers. Without it, it is not possible to read EDID. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: sm712fb: avoid unused function warningsArnd Bergmann
The sm712fb framebuffer driver encloses the power-management functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: fbdev/sm712fb.c:1549:12: warning: 'smtcfb_pci_suspend' defined but not used fbdev/sm712fb.c:1572:12: warning: 'smtcfb_pci_resume' defined but not used The driver also avoids using the SIMPLE_DEV_PM_OPS macro when CONFIG_PM is unset, which is redundant. This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: auo_k190x: avoid unused function warningsArnd Bergmann
The auo_k190x framebuffer driver encloses the power-management functions in #ifdef CONFIG_PM, but the auok190x_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: drivers/video/fbdev/auo_k190x.c:859:12: warning: 'auok190x_suspend' defined but not used drivers/video/fbdev/auo_k190x.c:899:12: warning: 'auok190x_resume' defined but not used This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: sis: enforce selection of at least one backendArnd Bergmann
The sis framebuffer driver complains with a compile-time warning if neither the FB_SIS_300 nor FB_SIS_315 symbols are selected: drivers/video/fbdev/sis/sis_main.c:61:2: warning: #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is se This is reasonable because it doesn't work in that case, but it's also annoying for randconfig builds and is one of the most common warnings I'm seeing on ARM now. This changes the Kconfig logic to prevent the silly configuration, by always selecting the FB_SIS_300 variant if the other one is not set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15fbdev: Remove unused SH-Mobile HDMI driverGeert Uytterhoeven
As of commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), the SH-Mobile HDMI driver is no longer used. In theory it could still be used on R-Mobile A1 SoCs, but that requires adding DT support to the driver, which is not planned. Remove the driver, it can be resurrected from git history when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15video: constify geode ops structuresJulia Lawall
These geode ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15simplefb: Claim and enable regulatorsChen-Yu Tsai
This claims and enables regulators listed in the simple framebuffer dt node. This is needed so that regulators powering the display pipeline and external hardware, described in the device node and known by the kernel code, will remain properly enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15drivers/video/fbdev/i740fb: remove unused variableSudip Mukherjee
The value of d_best is always 0 and never changes. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-11-10Merge tag 'fbdev-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - omap: fix hdmi audio configuration issue - ssd1307fb: add ssd1309 support - tridentfb: support DDC - gxt4500: enable support for non-PPC platforms * tag 'fbdev-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: radeonfb: Deinline large functions gxt4500: enable panning gxt4500: Use arch_phys_wc_* for framebuffer gxt4500: fix color order gxt4500: fix 16bpp 565 mode gxt4500: enable on non-PPC architectures tridentfb: Add DDC support fb_ddc: Allow I2C adapters without SCL read capability fbdev: ssd1307fb: add ssd1309 support fbdev: ssd1307fb: alphabetize headers video/omap: remove invalid check OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge tag 'backlight-for-linus-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Device Support - None New Functionality: - None Core Frameworks: - Reject legacy PWM request for device defined in DT Fix-ups: - Remove unnecessary MODULE_ALIAS(); adp8860_bl, adp8870_bl - Simplify code: pm8941-wled - Supply default-brightness logic; pm8941-wled Bug Fixes: - Clean up OF node; 88pm860x_bl - Ensure struct is zeroed; lp855x_bl" * tag 'backlight-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pm8941-wled: Add default-brightness property backlight: pm8941-wled: Fix ptr_ret.cocci warnings backlight: pwm: Reject legacy PWM request for device defined in DT backlight: 88pm860x_bl: Add missing of_node_put backlight: adp8870: Remove unnecessary MODULE_ALIAS() backlight: adp8860: Remove unnecessary MODULE_ALIAS() backlight: lp855x: Make sure props struct is zeroed
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-11-03Merge branch 'core-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI changes from Ingo Molnar: "The main changes in this cycle were: - further EFI code generalization to make it more workable for ARM64 - various extensions, such as 64-bit framebuffer address support, UEFI v2.5 EFI_PROPERTIES_TABLE support - code modularization simplifications and cleanups - new debugging parameters - various fixes and smaller additions" * 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) efi: Fix warning of int-to-pointer-cast on x86 32-bit builds efi: Use correct type for struct efi_memory_map::phys_map x86/efi: Fix kernel panic when CONFIG_DEBUG_VIRTUAL is enabled efi: Add "efi_fake_mem" boot option x86/efi: Rename print_efi_memmap() to efi_print_memmap() efi: Auto-load the efi-pstore module efi: Introduce EFI_NX_PE_DATA bit and set it from properties table efi: Add support for UEFIv2.5 Properties table efi: Add EFI_MEMORY_MORE_RELIABLE support to efi_md_typeattr_format() efifb: Add support for 64-bit frame buffer addresses efi/arm64: Clean up efi_get_fdt_params() interface arm64: Use core efi=debug instead of uefi_debug command line parameter efi/x86: Move efi=debug option parsing to core drivers/firmware: Make efi/esrt.c driver explicitly non-modular efi: Use the generic efi.memmap instead of 'memmap' acpi/apei: Use appropriate pgprot_t to map GHES memory arm64, acpi/apei: Implement arch_apei_get_mem_attributes() arm64/mm: Add PROT_DEVICE_nGnRnE and PROT_NORMAL_WT acpi, x86: Implement arch_apei_get_mem_attributes() efi, x86: Rearrange efi_mem_attributes() ...
2015-10-30backlight: pm8941-wled: Add default-brightness propertyBjorn Andersson
Default the brightness to 2048 and add possibility to override this in device tree. Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27backlight: pm8941-wled: Fix ptr_ret.cocci warningskbuild test robot
drivers/video/backlight/pm8941-wled.c:404:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-17fbcon: initialize blink interval before calling fb_set_parScot Doyle
Since commit 27a4c827c34ac4256a190cc9d24607f953c1c459 fbcon: use the cursor blink interval provided by vt a PPC64LE kernel fails to boot when fbcon_add_cursor_timer uses an uninitialized ops->cur_blink_jiffies. Prevent by initializing in fbcon_init before the call to info->fbops->fb_set_par. Reported-and-tested-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Cc: <stable@vger.kernel.org> [v4.2] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-15backlight: pwm: Reject legacy PWM request for device defined in DTVladimir Zapolskiy
Platform PWM backlight data provided by board's device tree should be complete enough to successfully request a pwm device using pwm_get() API. This change fixes a bug, when an arbitrary (first found) PWM is connected to a "pwm-backlight" compatible device, when explicit PWM device reference is not given. Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt already describes "pwms" as a required property, instead of blind selection of a potentially wrong PWM reject legacy PWM device registration request, leave legacy API only for non-dt cases. Based on initial implementation done by Dmitry Eremin-Solenikov. Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-15backlight: 88pm860x_bl: Add missing of_node_putJulia Lawall
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-14Merge tag 'efi-next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into core/efi Pull v4.4 EFI updates from Matt Fleming: - Make the EFI System Resource Table (ESRT) driver explicitly non-modular by ripping out the module_* code since Kconfig doesn't allow it to be built as a module anyway. (Paul Gortmaker) - Make the x86 efi=debug kernel parameter, which enables EFI debug code and output, generic and usable by arm64. (Leif Lindholm) - Add support to the x86 EFI boot stub for 64-bit Graphics Output Protocol frame buffer addresses. (Matt Fleming) - Detect when the UEFI v2.5 EFI_PROPERTIES_TABLE feature is enabled in the firmware and set an efi.flags bit so the kernel knows when it can apply more strict runtime mapping attributes - Ard Biesheuvel - Auto-load the efi-pstore module on EFI systems, just like we currently do for the efivars module. (Ben Hutchings) - Add "efi_fake_mem" kernel parameter which allows the system's EFI memory map to be updated with additional attributes for specific memory ranges. This is useful for testing the kernel code that handles the EFI_MEMORY_MORE_RELIABLE memmap bit even if your firmware doesn't include support. (Taku Izumi) Note: there is a semantic conflict between the following two commits: 8a53554e12e9 ("x86/efi: Fix multiple GOP device support") ae2ee627dc87 ("efifb: Add support for 64-bit frame buffer addresses") I fixed up the interaction in the merge commit, changing the type of current_fb_base from u32 to u64. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-12efifb: Add support for 64-bit frame buffer addressesMatt Fleming
The EFI Graphics Output Protocol uses 64-bit frame buffer addresses but these get truncated to 32-bit by the EFI boot stub when storing the address in the 'lfb_base' field of 'struct screen_info'. Add a 'ext_lfb_base' field for the upper 32-bits of the frame buffer address and set VIDEO_TYPE_CAPABILITY_64BIT_BASE when the field is useable. It turns out that the reason no one has required this support so far is that there's actually code in tianocore to "downgrade" PCI resources that have option ROMs and 64-bit BARS from 64-bit to 32-bit to cope with legacy option ROMs that can't handle 64-bit addresses. The upshot is that basically all GOP devices in the wild use a 32-bit frame buffer address. Still, it is possible to build firmware that uses a full 64-bit GOP frame buffer address. Chad did, which led to him reporting this issue. Add support in anticipation of GOP devices using 64-bit addresses more widely, and so that efifb works out of the box when that happens. Reported-by: Chad Page <chad.page@znyx.com> Cc: Pete Hawkins <pete.hawkins@znyx.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2015-10-08radeonfb: Deinline large functionsDenys Vlasenko
With this .config: http://busybox.net/~vda/kernel_config, after uninlining these functions have sizes and callsite counts as follows: __OUTPLLP: 61 bytes, 12 callsites __INPLL: 79 bytes, 150 callsites __OUTPLL: 82 bytes, 138 callsites _OUTREGP: 101 bytes, 8 callsites _radeon_msleep: 66 bytes, 18 callsites _radeon_fifo_wait: 83 bytes, 24 callsites _radeon_engine_idle: 92 bytes, 10 callsites radeon_engine_flush: 105 bytes, 2 callsites radeon_pll_errata_after_index_slow: 31 bytes, 11 callsites radeon_pll_errata_after_data_slow: 91 bytes, 9 callsites radeon_pll_errata_after_FOO functions are split into two parts: the inlined part which checks corresponding rinfo->errata bit, and out-of-line part which performs workaround magic per se. Reduction in code size is about 49,500 bytes: text data bss dec hex filename 85789648 22294616 20627456 128711720 7abfc28 vmlinux.before 85740176 22294680 20627456 128662312 7ab3b28 vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-08gxt4500: enable panningOndrej Zary
The driver implements pan_display but the corresponding flags are not set. Add FBINFO_HWACCEL_XPAN and FBINFO_HWACCEL_YPAN to flags to allow HW accelerated panning (for fast scrolling). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-08gxt4500: Use arch_phys_wc_* for framebufferOndrej Zary
Add arch_phys_wc_* calls to allow write-combining using MTRR. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-08gxt4500: fix color orderOndrej Zary
The color order in truecolor modes is wrong. This does not affect console but is visible e.g. in X11 which has wrong colors. Swap blue and red colors to fix the problem. Fixes https://forums.gentoo.org/viewtopic-t-692740-start-0.html Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-08gxt4500: fix 16bpp 565 modeOndrej Zary
Fix wrong colors in 16bpp 565 mode. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-08gxt4500: enable on non-PPC architecturesOndrej Zary
These chips can be present at least on x86 too - Fire GL2 AGP has GXT6000P but this driver is currently limited to PPC. Enable it for all architectures and add chip configuration for little-endian. Tested on x86 with Fire GL2 AGP. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-07video: of: fix memory leakSudip Mukherjee
If of_parse_display_timing() fails we are printing an error message and jumping to the error path but we missed freeing "dt". Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-10-05backlight: adp8870: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas
The driver has a I2C device id table that is used to create the modaliases and also "adp8870-backlight" is not a supported I2C id, so it's never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-05backlight: adp8860: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas
The driver has a I2C device id table that is used to create the modaliases and also "adp8860-backlight" is not a supported I2C id, so it's never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-05backlight: lp855x: Make sure props struct is zeroedWerner Johansson
The driver occasionally got stuck in suspend mode or other strange states as those parts of the props struct were never initialized. Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-09-30tridentfb: Add DDC supportOndrej Zary
Add DDC support for Trident cards. Tested on TGUI9440, TGUI9680, 3DImage 9750, Blade3D 9880 and Blade XP. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-30fb_ddc: Allow I2C adapters without SCL read capabilityOndrej Zary
i2c-algo-bit allows I2C adapters without SCL read capability to work but fb_ddc_read fails to work on them. Fix fb_ddc_read to work with I2C adapters not capable of reading SCL. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-30fbdev: broadsheetfb: fix memory leakSudip Mukherjee
We have requested the firmware and it was loaded but we missed releasing it both on success and error. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24OMAPDSS: panel-sony-acx565akm: Export OF module alias informationJavier Martinez Canillas
Drivers needs to export the OF id table and this be built into the module or udev won't have the necessary information to autoload the driver module when the device is registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24fbdev: omap2: connector-dvi: use of_get_i2c_adapter_by_node interfaceVladimir Zapolskiy
This change is needed to properly lock I2C bus driver, which serves DDC. Prior to this change i2c_put_adapter() is misused, which may lead to an overflow over zero of I2C bus driver user counter. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24tridentfb: Fix set_lwidth on TGUI9440 and CYBER9320Ondrej Zary
According to X.Org driver, chips older than TGUI9660 have only 1 width bit in AddColReg. Touching the 2nd one causes I2C/DDC to fail on TGUI9440. Set only 1 bit of width in AddColReg on TGUI9440 and CYBER9320. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24tridentfb: fix hang on Blade3D with CONFIG_CC_OPTIMIZE_FOR_SIZEOndrej Zary
When the kernel is compiled with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE), tridentfb hangs the machine upon load with Blade3D cards unless acceleration is disabled. This is caused by memcpy() which copies data byte-by-byte (rep movsb) when compiled with -Os. The card does not like that - it requires 32-bit access. Use iowrite_32() instead. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24video: fbdev: mb862xx: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24fbdev: ssd1307fb: add ssd1309 supportOlliver Schinagl
The ssd1307fb driver supports a lot of chips from the ssd130xfb series. This patch adds the ssd1309 chip, a 128x64 OLED driver chip. It is very similar to the other chips and only has some definitions added to support it. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24fbdev: ssd1307fb: alphabetize headersOlliver Schinagl
This patch sorts the headers on ssd1307fb driver. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24video/omap: remove invalid checkAndrzej Hajda
regno is unsigned so it cannot be negative. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24OMAPDSS: hdmi: Reconfigure and restart audio when display is enabledJyri Sarha
Reconfigure and restart audio when display is enabled, if audio playback was active before. This is needed in a situation when an audio+video stream application opens the audio stream before the video. When video stream is opened the display mode may change and that aborts audio playback, because the display is momentarily turned off. The audio configuration is stored when it is successfully applied and a boolean is set when the audio playback is started and unset when stopped. This data is used to reconfigure the audio when display is re-enabled. The audio playback is aborted if the reconfiguration fails. A new spin lock is introduced in order to protect state variables related to audio playback status. This is needed for the transition from display enabled state (when audio start/stop commands can be written to HW) to display disabled state (when audio start/stop commands update only the hdmi.audio_playing variable) to always serialize correctly with the start/stop audio commands. The already existing mutex can not be used, because the audio start and stop commands are executed in atomic context. For example: when display is turned back on we take the spinlock and we can be sure that the audio start/stop status will not change while we update the HW according to hdmi.audio_playing state and set hdmi.display_enabled to true. After releasing the lock hdmi.display_enabled is true and all audio_start and audio_stop commands write their stuff directly to HW. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-24video: fbdev: fsl: Fix the sleep function for FSL DIU moduleJason Jin
For deep sleep, the diu module will power off, when wake up from the deep sleep, the registers need to be reinitialized. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Acked-by: Timur Tabi <timur@tabi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-09-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge third patch-bomb from Andrew Morton: - even more of the rest of MM - lib/ updates - checkpatch updates - small changes to a few scruffy filesystems - kmod fixes/cleanups - kexec updates - a dma-mapping cleanup series from hch * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits) dma-mapping: consolidate dma_set_mask dma-mapping: consolidate dma_supported dma-mapping: cosolidate dma_mapping_error dma-mapping: consolidate dma_{alloc,free}_noncoherent dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent} mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd() mm: make sure all file VMAs have ->vm_ops set mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff() mm: mark most vm_operations_struct const namei: fix warning while make xmldocs caused by namei.c ipc: convert invalid scenarios to use WARN_ON zlib_deflate/deftree: remove bi_reverse() lib/decompress_unlzma: Do a NULL check for pointer lib/decompressors: use real out buf size for gunzip with kernel fs/affs: make root lookup from blkdev logical size sysctl: fix int -> unsigned long assignments in INT_MIN case kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo kexec: align crash_notes allocation to make it be inside one physical page kexec: remove unnecessary test in kimage_alloc_crash_control_pages() kexec: split kexec_load syscall from kexec core code ...
2015-09-10Merge tag 'for-linus-4.3-rc0b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen terminology fixes from David Vrabel: "Use the correct GFN/BFN terms more consistently" * tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn xen/privcmd: Further s/MFN/GFN/ clean-up hvc/xen: Further s/MFN/GFN clean-up video/xen-fbfront: Further s/MFN/GFN clean-up xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn xen: Use correctly the Xen memory terminologies arm/xen: implement correctly pfn_to_mfn xen: Make clear that swiotlb and biomerge are dealing with DMA address
2015-09-10mm: mark most vm_operations_struct constKirill A. Shutemov
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct structs should be constant. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Minchan Kim <minchan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 15:34:37 +0000