summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2020-07-24Merge v5.8-rc6 into drm-nextDave Airlie
I've got a silent conflict + two trees based on fixes to merge. Fixes a silent merge with amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-20video: fbdev: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de
2020-07-10fbdev: sm712fb: set error code in probeEvgeny Novikov
If smtcfb_pci_probe() does not detect a valid chip it cleans up everything and returns 0. This can result in various bad things later. The patch sets the error code on the corresponding path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200706155328.8396-1-novikov@ispras.ru
2020-07-10fbdev: da8xx-fb: go to proper label on error handling paths in probeEvgeny Novikov
fb_probe() can successfully allocate a new frame buffer, but then fail to perform some operations with regulator. In these cases fb_probe() goes to label err_pm_runtime_disable where the frame buffer is not released. The patch makes fb_probe() to go to label err_release_fb on corresponding error handling paths. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702160540.24546-1-novikov@ispras.ru
2020-07-10video: fbdev: vt8623fb: Constify static vga_regsetsRikard Falkeborn
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 25509 7928 64 33501 82dd drivers/video/fbdev/vt8623fb.o After: text data bss dec hex filename 26533 6904 64 33501 82dd drivers/video/fbdev/vt8623fb.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701210248.64893-1-rikard.falkeborn@gmail.com
2020-07-10omapfb: dss: Fix max fclk divider for omap36xxAdam Ford
The drm/omap driver was fixed to correct an issue where using a divider of 32 breaks the DSS despite the TRM stating 32 is a valid number. Through experimentation, it appears that 31 works, and it is consistent with the value used by the drm/omap driver. This patch fixes the divider for fbdev driver instead of the drm. Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb") Cc: <stable@vger.kernel.org> #4.5+ Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Rob Clark <robdclark@gmail.com> [b.zolnierkie: mark patch as applicable to stable 4.5+ (was 4.9+)] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630182636.439015-1-aford173@gmail.com
2020-07-10omapfb: fix multiple reference count leaks due to pm_runtime_get_syncAditya Pakki
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Cc: kjlu@umn.edu Cc: wu000273@umn.edu Cc: Allison Randal <allison@lohutok.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Enrico Weigelt <info@metux.net> cc: "Andrew F. Davis" <afd@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200614030528.128064-1-pakki001@umn.edu
2020-07-10video: fbdev: neofb: fix memory leak in neo_scan_monitor()Evgeny Novikov
neofb_probe() calls neo_scan_monitor() that can successfully allocate a memory for info->monspecs.modedb and proceed to case 0x03. There it does not free the memory and returns -1. neofb_probe() goes to label err_scan_monitor, thus, it does not free this memory through calling fb_destroy_modedb() as well. We can not go to label err_init_hw since neo_scan_monitor() can fail during memory allocation. So, the patch frees the memory directly for case 0x03. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru
2020-07-10video: fbdev: savage: fix memory leak on error handling path in probeEvgeny Novikov
savagefb_probe() calls savage_init_fb_info() that can successfully allocate memory for info->pixmap.addr but then fail when fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and does not free allocated memory. It is not valid to go to label failed_mmio since savage_init_fb_info() can fail during memory allocation as well. So, the patch free allocated memory on the error handling path in savage_init_fb_info() itself. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200619162136.9010-1-novikov@ispras.ru
2020-07-10fbcon: Use array3_size() helper in scr_memcpyw()Gustavo A. R. Silva
Use array3_size() helper instead of the open-coded version in scr_memcpyw() and scr_memsetw(). These sorts of multiplication factors need to be wrapped in array3_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200615231542.GA20470@embeddedor
2020-07-10video: fbdev: amifb: add FIXMEs about {put,get}_user() failuresBartlomiej Zolnierkiewicz
Since we lack the hardware (or proper emulator setup) for testing needed changes add FIXMEs to document the issues (so at least they are not forgotten). Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/380c0494-ed02-b2be-65b0-d385627fb894@samsung.com
2020-07-10video: fbdev: amifb: add FIXME about dead APUS supportBartlomiej Zolnierkiewicz
On 5/14/20 10:21 PM, Geert Uytterhoeven wrote: > These #ifdefs are relics from APUS (Amiga Power-Up System), which > added a PPC board. APUS support was killed off a long time ago, > when arch/ppc/ was still king, but these #ifdefs were missed, because > they didn't test for CONFIG_APUS. Add FIXME about using the C code variants (APUS ones) in the future. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/767d36ff-22ec-8136-7ebc-1d9d0d3ac98d@samsung.com
2020-06-30video: fbdev: amba-clcd: Retire elder CLCD driverLinus Walleij
All the functionality in this driver has been reimplemented in the new DRM driver in drivers/gpu/drm/pl111/* and all the boards using it have been migrated to use the DRM driver with all configuration coming from the device tree. I started the work to migrate the CLCD driver to DRM in april 2017 and it took a little more than 3 years to do this properly without leaving any platforms behind. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-2-linus.walleij@linaro.org
2020-06-26Merge tag 'drm-misc-fixes-2020-06-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull (less than what git shortlog provides): * In mcde, set up fbdev after device registration and removde the last access to dev->dev_private. Fixes an error message and a segmentation fault. * Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl panels. * In uvesafb, fix the handling of the noblank option. * Fix panel orientation for Asus T101HA and Acer S1003. * Fix DMA configuration for sun4i if IOMMU is present. * Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200625082717.GA14856@linux-uq9g
2020-06-24drm/fb-helper: Fix vt restoreDaniel Vetter
In the past we had a pile of hacks to orchestrate access between fbdev emulation and native kms clients. We've tried to streamline this, by always preferring the kms side above fbdev calls when a drm master exists, because drm master controls access to the display resources. Unfortunately this breaks existing userspace, specifically Xorg. When exiting Xorg first restores the console to text mode using the KDSET ioctl on the vt. This does nothing, because a drm master is still around. Then it drops the drm master status, which again does nothing, because logind is keeping additional drm fd open to be able to orchestrate vt switches. In the past this is the point where fbdev was restored, as part of the ->lastclose hook on the drm side. Now to fix this regression we don't want to go back to letting fbdev restore things whenever it feels like, or to the pile of hacks we've had before. Instead try and go with a minimal exception to make the KDSET case work again, and nothing else. This means that if userspace does a KDSET call when switching between graphical compositors, there will be some flickering with fbcon showing up for a bit. But a) that's not a regression and b) userspace can fix it by improving the vt switching dance - logind should have all the information it needs. While pondering all this I'm also wondering wheter we should have a SWITCH_MASTER ioctl to allow race-free master status handover. But that's for another day. v2: Somehow forgot to cc all the fbdev people. v3: Fix typo Alex spotted. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179 Cc: shlomo@fastmail.com Reported-and-Tested-by: shlomo@fastmail.com Cc: Michel Dänzer <michel@daenzer.net> Fixes: 64914da24ea9 ("drm/fbdev-helper: don't force restores") Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.7+ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Peter Rosin <peda@axentia.se> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
2020-06-21video: fbdev: uvesafb: fix "noblank" option handlingBartlomiej Zolnierkiewicz
Fix the recent regression. Fixes: dbc7ece12a38 ("video: uvesafb: use true,false for bool variables") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/81c9f140-d6fb-803a-18c8-04dae1007ab3@samsung.com
2020-06-20Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules
2020-06-19video: backlight: tosa_lcd: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-05Merge tag 'powerpc-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. * tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits) powerpc/pseries: Make vio and ibmebus initcalls pseries specific cxl: Remove dead Kconfig options powerpc: Add POWER10 architected mode powerpc/dt_cpu_ftrs: Add MMA feature powerpc/dt_cpu_ftrs: Enable Prefixed Instructions powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected powerpc: Add support for ISA v3.1 powerpc: Add new HWCAP bits powerpc/64s: Don't set FSCR bits in INIT_THREAD powerpc/64s: Save FSCR to init_task.thread.fscr after feature init powerpc/64s: Don't let DT CPU features set FSCR_DSCR powerpc/64s: Don't init FSCR_DSCR in __init_FSCR() powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations powerpc/module_64: Consolidate ftrace code powerpc/32: Disable KASAN with pages bigger than 16k powerpc/uaccess: Don't set KUEP by default on book3s/32 powerpc/uaccess: Don't set KUAP by default on book3s/32 powerpc/8xx: Reduce time spent in allow_user_access() and friends ...
2020-06-04Merge tag 'backlight-next-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Framework: - Add backlight_device_get_by_name() to the API New Device Support: - Add support for WLED5 to Qualcomm WLED Fix-ups: - Convert to GPIO descriptors in l4f00242t03 - Device Tree fix-ups for qcom-wled Bug Fixes: - Properly disable regulators on .probe() failure" * tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: Add backlight_device_get_by_name() backlight: qcom-wled: Add support for WLED5 peripheral that is present on PM8150L PMICs dt-bindings: backlight: qcom-wled: Add WLED5 bindings backlight: qcom-wled: Add callback functions dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml format backlight: l4f00242t03: Convert to GPIO descriptors backlight: lp855x: Ensure regulators are disabled on probe failure
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-06-01video: fbdev: Use IS_BUILTINJoe Perches
IS_BUILTIN can be use to replace various initializations like #if CONFIG_<FOO> int val = 1; #else int val = 0; #endif so do so. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/b1cf967015c5beafa475aaa30d8e21a58caff870.camel@perches.com
2020-06-01video: fbdev: pxafb: Use correct return value for pxafb_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Xuefeng Li <lixuefeng@loongson.cn> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1590390705-22898-1-git-send-email-yangtiezhu@loongson.cn
2020-06-01video: pxafb: Fix the function used to balance a 'dma_alloc_coherent()' callChristophe JAILLET
'dma_alloc_coherent()' must be balanced by a call to 'dma_free_coherent()' not 'dma_free_wc()'. The correct dma_free_ function is already used in the error handling path of the probe function. Fixes: 77e196752bdd ("[ARM] pxafb: allow video memory size to be configurable") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Jani Nikula <jani.nikula@intel.com> cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429084505.108897-1-christophe.jaillet@wanadoo.fr
2020-06-01drivers: video: hdmi: cleanup coding style in video a bitBernard Zhao
Eliminate the magic numbers, add vendor infoframe size macro like other hdmi modules. Signed-off-by: Bernard Zhao <bernard@vivo.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: opensource.kernel@vivo.com [b.zolnierkie: add "hdmi" to the patch summary] [b.zolnierkie: fix "vender" -> vendor" typo in the patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200427080530.3234-1-bernard@vivo.com
2020-06-01console: newport_con: fix an issue about leak related system resourcesDejin Zheng
A call of the function do_take_over_console() can fail here. The corresponding system resources were not released then. Thus add a call of iounmap() and release_mem_region() together with the check of a failure predicate. and also add release_mem_region() on device removal. Fixes: e86bb8acc0fdc ("[PATCH] VT binding: Make newport_con support binding") Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423164251.3349-1-zhengdejin5@gmail.com
2020-06-01video: fbdev: sm712fb: fix an issue about iounmap for a wrong addressDejin Zheng
the sfb->fb->screen_base is not save the value get by iounmap() when the chip id is 0x720. so iounmap() for address sfb->fb->screen_base is not right. Fixes: 1461d6672864854 ("staging: sm7xxfb: merge sm712fb with fbdev") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422160719.27763-1-zhengdejin5@gmail.com
2020-06-01omapfb/dss: fix comparison to bool warningJason Yan
Fix the following coccicheck warning: drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:461:15-32: WARNING: Comparison to bool drivers/video/fbdev/omap2/omapfb/dss/dispc.c:891:5-35: WARNING: Comparison of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrew F. Davis <afd@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422071903.637-1-yanaijie@huawei.com
2020-05-31video: fbdev: convert get_user_pages() --> pin_user_pages()John Hubbard
This code was using get_user_pages*(), in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200522041506.39638-3-jhubbard@nvidia.com
2020-05-31video: fbdev: fix error handling for get_user_pages_fast()John Hubbard
Dealing with the return value of get_user_pages*() variants has a few classic pitfalls, and this driver found one of them: the return value might be zero, positive, or -errno. And if positive, it might be fewer pages than were requested. And if fewer pages than requested, then the caller should return (via put_page()) the pages that *were* pinned. This driver was doing that *except* that it had a problem with the -errno case, which was being stored in an unsigned int, and which would case an interesting mess if it ever happened: nr_pages would be interpreted as a spectacularly huge unsigned value, rather than a small negative value. Also, it was unnecessarily overriding a potentially informative -errno, with -EINVAL, in some cases. Instead: clamp the nr_pages to zero or positive, so that the error handling works. And return the -errno value from get_user_pages*(), unchanged, if we get one. And explain this with comments, seeing as how it is error-prone. Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200522041506.39638-2-jhubbard@nvidia.com
2020-05-29omapfb: get rid of pointless access_ok() callsAl Viro
address is passed only to copy_to_user() Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29amifb: get rid of pointless access_ok() callsAl Viro
addresses passed only to get_user() and put_user() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-28powerpc: Remove Xilinx PPC405/PPC440 supportMichal Simek
The latest Xilinx design tools called ISE and EDK has been released in October 2013. New tool doesn't support any PPC405/PPC440 new designs. These platforms are no longer supported and tested. PowerPC 405/440 port is orphan from 2013 by commit cdeb89943bfc ("MAINTAINERS: Fix incorrect status tag") and commit 19624236cce1 ("MAINTAINERS: Update Grant's email address and maintainership") that's why it is time to remove the support fot these platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c593895e2cb57d232d85ce4d8c3a1aa7f0869cc.1590079968.git.christophe.leroy@csgroup.eu
2020-05-20Merge tag 'drm-intel-next-2020-05-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
2020-05-18video: amba-clcd: use devm_of_find_backlightSam Ravnborg
Look up backlight device using devm_of_find_backlight(). This simplifies the code and prevents us from hardcoding the node name in the driver. v2: - Added Cc: Peter Ujfalusi Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200517190139.740249-2-sam@ravnborg.org
2020-05-14video/hdmi: Add Unpack only function for DRM infoframeGwan-gyeong Mun
It adds an unpack only function for DRM infoframe for dynamic range and mastering infoframe readout. It unpacks the information data block contained in the binary buffer into a structured frame of the HDMI Dynamic Range and Mastering (DRM) information frame. In contrast to hdmi_drm_infoframe_unpack() function, it does not verify a checksum. It can be used for unpacking a DP HDR Metadata Infoframe SDP case. DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering (DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe. But DP SDP header and payload structure are different from HDMI DRM Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of a verifying checksum. v9: Add clear comments to hdmi_drm_infoframe_unpack_only() and hdmi_drm_infoframe_unpack() (Laurent Pinchart) Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-2-gwan-gyeong.mun@intel.com
2020-05-11drivers/powerpc: Replace _ALIGN_UP() by ALIGN()Christophe Leroy
_ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/a5945463f86c984151962a475a3ee56a2893e85d.1587407777.git.christophe.leroy@c-s.fr
2020-05-11backlight: Add backlight_device_get_by_name()Noralf Trønnes
Add a way to lookup a backlight device based on its name. Will be used by a USB display gadget getting the name from configfs. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-09video: fbdev: pxa168fb: make pxa168fb_init_mode() return voidJason Yan
No other functions use the return value of pxa168fb_init_mode() and the return value is always 0 now. Make it return void. This fixes the following coccicheck warning: drivers/video/fbdev/pxa168fb.c:565:5-8: Unneeded variable: "ret". Return "0" on line 597 Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed indent] Link: https://patchwork.freedesktop.org/patch/msgid/20200506061745.19451-1-yanaijie@huawei.com
2020-05-06video: fbdev: valkyriefb.c: fix warning comparing pointer to 0Jason Yan
Fix the following coccicheck warning: drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to 0, suggest !E drivers/video/fbdev/valkyriefb.c:334:12-13: WARNING comparing pointer to 0 drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to 0 Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200429140942.8137-1-yanaijie@huawei.com
2020-05-06video: fbdev: w100fb: Fix a potential double free.Christophe JAILLET
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in the 'w100fb_restore_vidmem' function. (these functions are called respectively from the 'suspend' and the 'resume' functions) However, it is also freed in the 'remove' function. In order to avoid a potential double free, set the corresponding pointer to NULL once freed in the 'w100fb_restore_vidmem' function. Fixes: aac51f09d96a ("[PATCH] w100fb: Rewrite for platform independence") Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Antonino Daplas <adaplas@pol.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: <stable@vger.kernel.org> # v2.6.14+ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200506181902.193290-1-christophe.jaillet@wanadoo.fr
2020-05-06fbdev: aty: use true, false for bool variables in atyfb_base.cJason Yan
Fix the following coccicheck warning: drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200422071854.513-1-yanaijie@huawei.com
2020-05-06video: uvesafb: use true,false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200422071845.403-1-yanaijie@huawei.com
2020-05-06video: udlfb: use true,false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200422071836.49123-1-yanaijie@huawei.com
2020-05-06video: fbdev: i810: use true,false for bool variablesJason Yan
Fix the following coccicheck warning: drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200422071826.49038-1-yanaijie@huawei.com
2020-05-06backlight: qcom-wled: Add support for WLED5 peripheral that is present on ↵Subbaraman Narayanamurthy
PM8150L PMICs PM8150L WLED supports the following: - Two modulators and each sink can use any of the modulator - Multiple CABC selection options from which one can be selected/enabled - Multiple brightness width selection (12 bits to 15 bits) Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-06 12:26:57 +0000