summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-23Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The clk changes for this release cycle are mostly dominated by new device support in terms of LoC, but there has been some cleanup in the core as well as the usual minor clk additions to various drivers. Core: - parent tracking has been simplified - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started - of_clk_init() doesn't consider disabled DT nodes anymore - clk_unregister() had an error path bug squashed - of_clk_get_parent_count() has been fixed to only return unsigned ints - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone New Drivers: - NXP LPC18xx creg - QCOM IPQ4019 GCC - TI dm814x ADPLL - i.MX6QP Updates: - Cyngus audio clks found on Broadcom iProc devices - Non-critical fixes for BCM2385 PLLs - Samsung exynos5433 updates for clk id errors, HDMI support, suspend/resume simplifications - USB, CAN, LVDS, and FCP clks on shmobile devices - sunxi got support for more clks on new SoCs and went through a minor refactoring/rewrite to use a simpler factor clk construct - rockchip added some more clk ids and added suport for fraction dividers - QCOM GDSCs in msm8996 - A new devm helper to make adding custom actions simpler (acked by Greg)" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits) clk: bcm2835: fix check of error code returned by devm_ioremap_resource() clk: renesas: div6: use RENESAS for #define clk: renesas: Rename header file renesas.h clk: max77{686,802}: Remove CLK_IS_ROOT clk: versatile: Remove CLK_IS_ROOT clk: sunxi: Remove use of variable length array clk: fixed-rate: Remove CLK_IS_ROOT clk: qcom: Remove CLK_IS_ROOT doc: dt: add documentation for lpc1850-creg-clk driver clk: add lpc18xx creg clk driver clk: lpc32xx: fix compilation warning clk: xgene: Add missing parenthesis when clearing divider value clk: mb86s7x: Remove CLK_IS_ROOT clk: x86: Remove clkdev.h and clk.h includes clk: x86: Remove CLK_IS_ROOT clk: mvebu: Remove CLK_IS_ROOT clk: renesas: move drivers to renesas directory clk: si5{14,351,70}: Remove CLK_IS_ROOT clk: scpi: Remove CLK_IS_ROOT clk: s2mps11: Remove CLK_IS_ROOT ...
2016-03-21Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ...
2016-03-20Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...
2016-03-17Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
2016-03-16Merge tag 'fbdev-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - Miscallaneous small fixes to various fbdev drivers - Remove fb_rotate, which was never used - pmag fb improvements * tag 'fbdev-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (21 commits) xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND" video: fbdev: sis: remove unused variable drivers/video: make fbdev/sunxvr2500.c explicitly non-modular drivers/video: make fbdev/sunxvr1000.c explicitly non-modular drivers/video: make fbdev/sunxvr500.c explicitly non-modular video: exynos: fix modular build fbdev: da8xx-fb: fix videomodes of lcd panels fbdev: kill fb_rotate video: fbdev: bt431: Correct cursor format control macro video: fbdev: pmag-ba-fb: Optimize Bt455 colormap addressing video: fbdev: pmag-ba-fb: Fix and rework Bt455 colormap handling video: fbdev: bt455: Remove unneeded colormap helpers for cursor support video: fbdev: pmag-aa-fb: Report video timings video: fbdev: pmag-aa-fb: Enable building as a module video: fbdev: pmag-aa-fb: Adapt to current APIs video: fbdev: pmag-ba-fb: Fix the lower margin size fbdev: sh_mobile_lcdc: Use ARCH_RENESAS fbdev: n411: check return value fbdev: exynos: fix IS_ERR_VALUE usage video: Use bool instead int pointer for get_opt_bool() argument ...
2016-03-16Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-14Merge drm-fixes into drm-next.Dave Airlie
Nouveau wanted this to avoid some worse conflicts when I merge that.
2016-03-11xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"Arnd Bergmann
The Xen framebuffer driver selects the xen keyboard driver, so the latter will be built-in if XEN_FBDEV_FRONTEND=y. However, when CONFIG_INPUT is a loadable module, this configuration cannot work. On mainline kernels, the symbol will be enabled but not used, while in combination with a patch I have to detect such useless configurations, we get the expected link failure: drivers/input/built-in.o: In function `xenkbd_remove': xen-kbdfront.c:(.text+0x2f0): undefined reference to `input_unregister_device' xen-kbdfront.c:(.text+0x30e): undefined reference to `input_unregister_device' This removes the extra "select", as it just causes more trouble than it helps. In theory, some defconfig file might break if it has XEN_FBDEV_FRONTEND in it but not INPUT_XEN_KBDDEV_FRONTEND. The Kconfig fragment we ship in the kernel (kernel/configs/xen.config) however already enables both, and anyone using an old .config file would keep having both enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: David Vrabel <david.vrabel@citrix.com> Fixes: 36c1132e34bd ("xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND") Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-03drm/omap: move dss_mgr_* declarations to omapdrm/omapfbTomi Valkeinen
This patch continues the work to create private versions of the omapdss.h header for omapdrm and omapfb. This one moves the dss_mgr_* function declarations. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03drm/omap: move struct dss_mgr_ops to omapdrm/omapfbTomi Valkeinen
This patch continues the work to create private versions of the omapdss.h header for omapdrm and omapfb. This one moves 'struct dss_mgr_ops'. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03drm/omap, omapfb: move exported dispc function declarations to omapdrm/omapfbTomi Valkeinen
omapdrm and omapfb still share the same include/video/omapdss.h. We need to change that so that we can proceed with omapdrm work. However, it's not trivial to make separate omapfb and omapdrm versions of omapdss.h, as that file is also included in other places like arch code, audio code and omap_vout code. So we'll do it piece by piece. This patch makes private versions of all the dispc function declarations that are in omapdss.h. For omapdrm we create a new file, drivers/gpu/drm/omapdrm/dss/omapdss.h, which will contain headers meant to be visible outside omapdss. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03video: fbdev: sis: remove unused variableSudip Mukherjee
The variables modeflag and resinfo were only assigned some value but were never used. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03drivers/video: make fbdev/sunxvr2500.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config FB_XVR2500 bool "Sun XVR-2500 3DLABS Wildcat support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03drivers/video: make fbdev/sunxvr1000.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config FB_XVR1000 bool "Sun XVR-1000 support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-03-03drivers/video: make fbdev/sunxvr500.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config FB_XVR500 bool "Sun XVR-500 3DLABS Wildcat support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-29video: exynos: fix modular buildArnd Bergmann
The s6e8ax0 driver has a dependency on BACKLIGHT_CLASS_DEVICE, which can be configured as a loadable module, so we have to make the driver a tristate symbol as well, to avoid this error: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x23a48): undefined reference to `devm_backlight_device_register' This also means we get another error from a missing export, which this fixes as well: ERROR: "exynos_mipi_dsi_register_lcd_driver" [drivers/video/fbdev/exynos/s6e8ax0.ko] undefined! The drivers are all written to be loadable modules already, except the Kconfig options for that are missing, which makes the patch really easy. Finally, the EXYNOS_VIDEO option is turned into tristate as well for good measure, as all framebuffer drivers should be configurable as modules, though this change is not strictly necessary. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-29fbdev: da8xx-fb: fix videomodes of lcd panelsSushaanth Srirangapathi
Commit 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but forgot to update known_lcd_panels[] which had sync values according to old logic. This breaks LCD at least on DA850 EVM. This patch fixes this issue and I have tested this for panel "Sharp_LK043T1DG01" using DA850 EVM board. Fixes: 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") Signed-off-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26simplefb: Remove impossible check for of_clk_get_parent_count() < 0Stephen Boyd
The check for < 0 is impossible now that of_clk_get_parent_count() returns an unsigned int. Simplify the code and update the types. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: <linux-fbdev@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-26fbdev: kill fb_rotateRasmus Villemoes
The fb_rotate method in struct fb_ops is never actually invoked, and it's been that way in the entire history of git (in fact, the last occurrence of the string '->fb_rotate' vanished over 10 years ago, with b4d8aea6d6, and that merely tested whether the callback existed). So remove some dead code and make struct fb_obs a little smaller. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26fbcon: set a default value to blink intervalJean-Philippe Brucker
Since commit 27a4c827c34ac4256a190cc9d24607f953c1c459 fbcon: use the cursor blink interval provided by vt two attempts have been made at fixing a possible hang caused by cursor_timer_handler. That function registers a timer to be triggered at "jiffies + fbcon_ops.cur_blink_jiffies". A new case had been encountered during initialisation of clcd-pl11x: fbcon_fb_registered do_fbcon_takeover -> do_register_con_driver fbcon_startup (A) add_cursor_timer (with cur_blink_jiffies = 0) -> do_bind_con_driver visual_init fbcon_init (B) cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms); If we take an softirq anywhere between A and B (and we do), cursor_timer_handler executes indefinitely. Instead of patching all possible paths that lead to this case one at a time, fix the issue at the source and initialise cur_blink_jiffies to 200ms when allocating fbcon_ops. This was its default value before aforesaid commit. fbcon_cursor or fbcon_init will refine this value downstream. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Cc: <stable@vger.kernel.org> # v4.2 Tested-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: bt431: Correct cursor format control macroMaciej W. Rozycki
The Bt431 cursor generator supports simultaneous generation of a 64 x 64 and a cross hair cursor in which the cursor format control bit (bit D4) of the command register "specifies whether the contents of the cursor RAM are to be logically exclusive-ORed (logical zero) or ORed (logical one) with the cross hair cursor". Rename the relevant macro accordingly. References: [1] "Bt431 Monolithic CMOS 64 x 64 Pixel Cursor Generator", Brooktree Corporation, Document Number: L431001, Rev. J Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: pmag-ba-fb: Optimize Bt455 colormap addressingMaciej W. Rozycki
Use the address autoincrement feature when accessing successive palette entries and also skip loading a palette address in overlay register assesses which do not use that address. Provide a red/green/blue register sequencer reset helper for use in overlay register assesses where the state of the sequencer is not known. References: [1] "Bt454 Bt455 170 MHz Monolithic CMOS 16 Color Palette RAMDAC", Brooktree Corporation, Document Number: L454001, Rev. I Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: pmag-ba-fb: Fix and rework Bt455 colormap handlingMaciej W. Rozycki
The Bt455 is a greyscale RAMDAC, using the green color palette entries only while still providing registers for the red and blue components, all the three of which have to be loaded on palette updates. Chip documentation [1] mandates that the unused red and blue registers are written with 0. Therefore update code to follow this requirement and given that it makes the red and blue components unusable remove them from internal API calls altogether. References: [1] "Bt454 Bt455 170 MHz Monolithic CMOS 16 Color Palette RAMDAC", Brooktree Corporation, Document Number: L454001, Rev. I Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: bt455: Remove unneeded colormap helpers for cursor supportMaciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: pmag-aa-fb: Report video timingsMaciej W. Rozycki
The board uses hardwired timings compatible with 72Hz DEC VR319-DA and VRM17-AA monitors, according to the board owner's manual[1]. These timings are accordingly taken from the VR319 manual[2]. References: [1] "The Monochrome Frame Buffer TURBOchannel Module", Digital Equipment Corporation, Order Number: EK-MFBOM-TC-001, December 1991 [2] "Installing and Using the VR319 Monochrome Monitor", Digital Equipment Corporation, Order Number: EK-VR319-IN-001, First Edition, January 1990, Table 6-1 "Video Timing--1280 x 1024 Resolution" Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: pmag-aa-fb: Enable building as a moduleMaciej W. Rozycki
With the current TURBOchannel API support is automagical. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: pmag-aa-fb: Adapt to current APIsMaciej W. Rozycki
Rework the driver to use the current frambuffer and TURBOchannel APIs, including proper resource management and using the new framework for hardware cursor support. NB two Bt431 cursor generators are included onboard, both responding at the same TURBOchannel bus addresses and with their host data buses wired to byte lanes #0 and #1 respectively of the 32-bit bus. Therefore both can be accessed simultaneously with 16-bit data transfers. Cursor outputs of the chip wired to lane #0 drive the respective overlay select inputs of the Bt455 RAMDAC, whereas cursor outputs of the chip wired to lane #1 drive the respective P3 pixel select inputs of the RAMDAC. So 5 (out of 17) Bt455 color registers are usable with this board: palette entries #0 and #1 for frame buffer pixel data driven while neither cursor generator is active, palette entries #8 and #9 for frame buffer pixel data driven while cursor generator #1 is active only and the overlay entry while cursor generator #0 is active. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26video: fbdev: pmag-ba-fb: Fix the lower margin sizeMaciej W. Rozycki
According to the board specification[1] the width of the vertical sync front porch is 12 pixels or the same as the width of the horizontal sync front porch. This in turn means the size of the lower margin is 0, because the vertical sync starts as soon as the start of the horizontal sync terminates the last line. References: [1] "PMAG-BA TURBOchannel Color Frame Buffer Functional Specification", Revision 1.2, Workstation Systems Engineering, Digital Equipment Corporation, August 27, 1990, Table 3-5: "Video Timing" Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26fbdev: sh_mobile_lcdc: Use ARCH_RENESASSimon Horman
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26fbdev: n411: check return valueSudip Mukherjee
We were not checking the return value of platform_device_add_data() which can fail. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-16fbdev: exynos: fix IS_ERR_VALUE usageAndrzej Hajda
IS_ERR_VALUE macro should be used only with unsigned long type. For signed types comparison 'ret < 0' should be used. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-16video: Use bool instead int pointer for get_opt_bool() argumentDaniel Wagner
As the function name already indicates that get_opt_bool() parses for a bool. It is not a surprise that compiler is complaining about it when -Werror=incompatible-pointer-types is used: drivers/video/fbdev/intelfb/intelfbdrv.c: In function ‘intelfb_setup’: drivers/video/fbdev/intelfb/intelfbdrv.c:353:39: error: passing argument 3 of ‘get_opt_bool’ from incompatible pointer type [-Werror=incompatible-pointer-types] if (get_opt_bool(this_opt, "accel", &accel)) Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-16video: fbdev: metronomefb: two harmless off by one bugsDan Carpenter
par->metromem_cmd->args[] is an array of 31 elements of size u16. Here we have initialized the first "i" elements and want to set the rest to zero. The issue here is that ARRAY_SIZE(par->metromem_cmd->args) is 31 and not 32 as in the original code. It means that we set ->csum to zero, but that is harmless because we immediately set it to the correct value on the next line. Still, the buffer overflow upsets static checkers so let's correct the math. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-16mm/gup: Switch all callers of get_user_pages() to not pass tsk/mmDave Hansen
We will soon modify the vanilla get_user_pages() so it can no longer be used on mm/tasks other than 'current/current->mm', which is by far the most common way it is called. For now, we allow the old-style calls, but warn when they are used. (implemented in previous patch) This patch switches all callers of: get_user_pages() get_user_pages_unlocked() get_user_pages_locked() to stop passing tsk/mm so they will no longer see the warnings. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-16gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas
Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05PCI: Remove includes of asm/pci-bridge.hBjorn Helgaas
Drivers should include asm/pci-bridge.h only when they need the arch- specific things provided there. Outside of the arch/ directories, the only drivers that actually need things provided by asm/pci-bridge.h are the powerpc RPA hotplug drivers in drivers/pci/hotplug/rpa*. Remove the includes of asm/pci-bridge.h from the other drivers, adding an include of linux/pci.h if necessary. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-29video: fbdev: imxfb: Provide a reset mechanismFabio Estevam
Currently when we boot the kernel on a mx25pdk the LCDC controller does not show the Linux logo on boot. This problem is well explained by Sascha Hauer: "Unfortunately this LCD controller does not have an enable bit. The controller starts directly when the clocks are enabled. If the clocks are enabled when the controller is not yet programmed with proper register values then it just goes into some undefined state. What I suspect is that the clocks already were enabled before driver probe, presumably by the bootloader, so the controller is already in undefined state when entering Linux. Now by dis/enabling the ipg clock you effectively reset the controller. Since you have programmed it with valid register values in the mean time it starts working after this reset." So do as suggested and force a reset of the LCDC hardware by enabling and disabling the IPG clock. With this change the Linux logo can be seen on boot on a mx25pdk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29fbdev: mmp: print IRQ resource using %pR format stringArnd Bergmann
resource_size_t cannot be printed using the %x format string when we it is defined as u64: drivers/video/fbdev/mmp/hw/mmp_ctrl.c: In function 'mmphw_probe': drivers/video/fbdev/mmp/hw/mmp_ctrl.c:506:22: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] dev_err(ctrl->dev, "%s: res %x - %x map failed\n", __func__, ^ drivers/video/fbdev/mmp/hw/mmp_ctrl.c:506:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] This changes the format string to %pR, which is interpreted by the printk implementation to pretty-print a resource structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29fbdev: da8xx-fb: remove incorrect type castArnd Bergmann
The probe function correct passes a dma_addr_t pointer into dma_alloc_coherent(), but has a cast to resource_size_t, which might be different from dma_addr_t: drivers/video/fbdev/da8xx-fb.c: In function 'fb_probe': drivers/video/fbdev/da8xx-fb.c:1431:10: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] This removes the cast, which avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29fbdev: s6e8ax0: avoid unused function warningsArnd Bergmann
The s6e8ax0 suspend/resume functions are hidden inside of an #ifdef when CONFIG_PM is set to avoid unused function warnings, but they call some other functions that nothing else calls, and we get warnings about those: drivers/video/fbdev/exynos/s6e8ax0.c:449:13: error: 's6e8ax0_sleep_in' defined but not used [-Werror=unused-function] drivers/video/fbdev/exynos/s6e8ax0.c:485:13: error: 's6e8ax0_display_off' defined but not used [-Werror=unused-function] This marks the PM functions as __maybe_unused so the compiler can silently drop them when they are not referenced. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-29ocfb: fix tgdel and tvdel timing parametersAndrea Merello
According to the ocfb documentation: Fix tgdel HW param should be left margin, not right. Fix tvdel HW param should upper margin, not lower. This seems to fix lock issues on certain monitors (tested on a slightly customized IP, but the FPGA guy said that it should be the same wrt this changes). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Acked-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-18Merge tag 'fbdev-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Summary: - pxafb: device-tree support - An unsafe kernel parameter 'lockless_register_fb' for debugging problems happening while inside the console lock - Small miscellaneous fixes & cleanups - omapdss: add writeback support functions - Separation of omapfb and omapdrm (see below) About the separation of omapfb and omapdrm, see http://permalink.gmane.org/gmane.comp.video.dri.devel/143151 for longer story. The short version: omapfb and omapdrm have shared low level drivers (omapdss and panel drivers), making further development of omapdrm difficult. After these patches omapfb and omapdrm have their own versions of the drivers, which are more or less direct copies for now but will diverge soon. This also means that omapfb (everything under drivers/video/fbdev/omap2/) is now in maintenance mode, and all new development will be done for omapdrm (drivers/gpu/drm/omapdrm/)" * tag 'fbdev-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (49 commits) video: fbdev: pxafb: fix out of memory error path drm/omap: make omapdrm select OMAP2_DSS drm/omap: move omapdss & displays under omapdrm omapfb: move vrfb into omapfb omapfb: take omapfb's private omapdss into use omapfb/displays: change CONFIG_DISPLAY_* to CONFIG_FB_OMAP2_* omapfb/dss: change CONFIG_OMAP* to CONFIG_FB_OMAP* omapdss: remove CONFIG_OMAP2_DSS_VENC from omapdss.h omapfb: copy omapdss & displays for omapfb omapfb: allow compilation only if DRM_OMAP is disabled fbdev: omap2: panel-dpi: simplify gpio setting fbdev: omap2: panel-dpi: in .disable first disable backlight then display OMAPDSS: DSS: fix a warning message video: omapdss: delete unneeded of_node_put OMAPDSS: DISPC: Remove boolean comparisons OMAPDSS: DSI: cleanup DSI_IRQ_ERROR_MASK define OMAPDSS: remove extra out == NULL checks OMAPDSS: change internal dispc functions to static OMAPDSS: make a two dss feat funcs internal to omapdss OMAPDSS: remove extra EXPORT_SYMBOLs ...
2016-01-18video: fbdev: pxafb: fix out of memory error pathRobert Jarzmik
As seen by Julia, the initial allocation memory is not checked anymore after commit "video: fbdev: pxafb: initial devicetree conversion". Introduce back the removed test. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-14Merge tag 'backlight-for-linus-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: Fix-ups: - Take heed of GPIO default-on requests; gpio_backlight - Enable DT probing; tps65217_bl Bug Fixes: - Free resources in error path; pwm_bl - Fix uninitialised variable warning; adp8860_bl, adp8870_bl - Protect unconditional DT look-ups from non-DT platforms; pwm_bl - Fix backlight flicker; pwm_bl * tag 'backlight-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Free PWM requested by legacy API on error path backlight: adp8860: Fix another uninitialized variable use backlight: gpio-backlight: Use default-on on GPIO request backlight: pwm_bl: Fix broken PWM backlight for non-dt platforms backlight: tps65217_bl: Add MODULE_DEVICE_TABLE backlight: pwm_bl: Avoid backlight flicker when probed from DT backlight: adp88x0: Fix uninitialized variable use
2016-01-11backlight: pwm_bl: Free PWM requested by legacy API on error pathVladimir Zapolskiy
If pwm is requested by legacy pwm_request() and if the following backlight_device_register() call fails, add pwm_free() clean-up. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11backlight: adp8860: Fix another uninitialized variable useArnd Bergmann
A recent patch I did fixed two potential uses of uninitialized variables in the adp8870 and adp8860 drivers. Unfortunately, I missed another one: drivers/video/backlight/adp8860_bl.c: In function 'adp8860_bl_ambient_light_level_show': drivers/video/backlight/adp8860_bl.c:570:11: warning: 'reg_val' may be used uninitialized in this function This does the same change as before in one additional function, and also changes the check for the return value in a way that avoids another false positive warning with a similar message. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6be3a5a9cd91 ("backlight: adp88x0: Fix uninitialized variable use") Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 17:40:05 +0000