summaryrefslogtreecommitdiff
path: root/drivers/vhost
AgeCommit message (Collapse)Author
2019-10-13vhost/test: stop device before resetMichael S. Tsirkin
When device stop was moved out of reset, test device wasn't updated to stop before reset, this resulted in a use after free. Fix by invoking stop appropriately. Fixes: b211616d7125 ("vhost: move -net specific code out") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-14Revert "vhost: block speculation of translated descriptors"Michael S. Tsirkin
This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-11vhost: make sure log_num < in_numyongduan
The code assumes log_num < in_num everywhere, and that is true as long as in_num is incremented by descriptor iov count, and log_num by 1. However this breaks if there's a zero sized descriptor. As a result, if a malicious guest creates a vring desc with desc.len = 0, it may cause the host kernel to crash by overflowing the log array. This bug can be triggered during the VM migration. There's no need to log when desc.len = 0, so just don't increment log_num in this case. Fixes: 3a4d5c94e959 ("vhost_net: a kernel-level virtio server") Cc: stable@vger.kernel.org Reviewed-by: Lidong Chen <lidongchen@tencent.com> Signed-off-by: ruippan <ruippan@tencent.com> Signed-off-by: yongduan <yongduan@tencent.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-11vhost: block speculation of translated descriptorsMichael S. Tsirkin
iovec addresses coming from vhost are assumed to be pre-validated, but in fact can be speculated to a value out of range. Userspace address are later validated with array_index_nospec so we can be sure kernel info does not leak through these addresses, but vhost must also not leak userspace info outside the allowed memory table to guests. Following the defence in depth principle, make sure the address is not validated out of node range. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2019-09-04Revert "vhost: access vq metadata through kernel virtual address"Michael S. Tsirkin
This reverts commit 7f466032dc ("vhost: access vq metadata through kernel virtual address"). The commit caused a bunch of issues, and while commit 73f628ec9e ("vhost: disable metadata prefetch optimization") disabled the optimization it's not nice to keep lots of dead code around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-04vhost: Remove unnecessary variableYunsheng Lin
It is unnecessary to use ret variable to return the error code, just return the error code directly. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-04vhost/test: fix build for vhost testTiwei Bie
Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b0727ff ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2019-09-04vhost/test: fix build for vhost testTiwei Bie
Since below commit, callers need to specify the iov_limit in vhost_dev_init() explicitly. Fixes: b46a0bf78ad7 ("vhost: fix OOB in get_rx_bufs()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30vhost/vsock: split packets to send using multiple buffersStefano Garzarella
If the packets to sent to the guest are bigger than the buffer available, we can split them, using multiple buffers and fixing the length in the packet header. This is safe since virtio-vsock supports only stream sockets. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30vsock/virtio: limit the memory used per-socketStefano Garzarella
Since virtio-vsock was introduced, the buffers filled by the host and pushed to the guest using the vring, are directly queued in a per-socket list. These buffers are preallocated by the guest with a fixed size (4 KB). The maximum amount of memory used by each socket should be controlled by the credit mechanism. The default credit available per-socket is 256 KB, but if we use only 1 byte per packet, the guest can queue up to 262144 of 4 KB buffers, using up to 1 GB of memory per-socket. In addition, the guest will continue to fill the vring with new 4 KB free buffers to avoid starvation of other sockets. This patch mitigates this issue copying the payload of small packets (< 128 bytes) into the buffer of last packet queued, in order to avoid wasting memory. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26vhost: disable metadata prefetch optimizationMichael S. Tsirkin
This seems to cause guest and host memory corruption. Disable for now until we get a better handle on that. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-17Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482Thomas Gleixner
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17vhost_net: disable zerocopy by defaultJason Wang
Vhost_net was known to suffer from HOL[1] issues which is not easy to fix. Several downstream disable the feature by default. What's more, the datapath was split and datacopy path got the support of batching and XDP support recently which makes it faster than zerocopy part for small packets transmission. It looks to me that disable zerocopy by default is more appropriate. It cold be enabled by default again in the future if we fix the above issues. [1] https://patchwork.kernel.org/patch/3787671/ Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'v5.2-rc4' into mauroJonathan Corbet
We need to pick up post-rc1 changes to various document files so they don't get lost in Mauro's massive RST conversion push.
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-06vhost: fix clang build warningMichael S. Tsirkin
Clang warns: drivers/vhost/vhost.c:2085:5: warning: macro expansion producing 'defined' has undefined behavior [-Wexpansion-to-defined] #if VHOST_ARCH_CAN_ACCEL_UACCESS ^ drivers/vhost/vhost.h:98:38: note: expanded from macro 'VHOST_ARCH_CAN_ACCEL_UACCESS' #define VHOST_ARCH_CAN_ACCEL_UACCESS defined(CONFIG_MMU_NOTIFIER) && \ ^ It's being pedantic for the sake of portability, but the fix is easy enough. Rework the definition of VHOST_ARCH_CAN_ACCEL_UACCESS to expand to a constant. Fixes: 7f466032dc9e ("vhost: access vq metadata through kernel virtual address") Link: https://github.com/ClangBuiltLinux/linux/issues/508 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2019-06-05vhost: access vq metadata through kernel virtual addressJason Wang
It was noticed that the copy_to/from_user() friends that was used to access virtqueue metdata tends to be very expensive for dataplane implementation like vhost since it involves lots of software checks, speculation barriers, hardware feature toggling (e.g SMAP). The extra cost will be more obvious when transferring small packets since the time spent on metadata accessing become more significant. This patch tries to eliminate those overheads by accessing them through direct mapping of those pages. Invalidation callbacks is implemented for co-operation with general VM management (swap, KSM, THP or NUMA balancing). We will try to get the direct mapping of vq metadata before each round of packet processing if it doesn't exist. If we fail, we will simplely fallback to copy_to/from_user() friends. This invalidation and direct mapping access are synchronized through spinlock and RCU. All matedata accessing through direct map is protected by RCU, and the setup or invalidation are done under spinlock. This method might does not work for high mem page which requires temporary mapping so we just fallback to normal copy_to/from_user() and may not for arch that has virtual tagged cache since extra cache flushing is needed to eliminate the alias. This will result complex logic and bad performance. For those archs, this patch simply go for copy_to/from_user() friends. This is done by ruling out kernel mapping codes through ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE. Note that this is only done when device IOTLB is not enabled. We could use similar method to optimize IOTLB in the future. Tests shows at most about 23% improvement on TX PPS when using virtio-user + vhost_net + xdp1 + TAP on 2.6GHz Broadwell: SMAP on | SMAP off Before: 5.2Mpps | 7.1Mpps After: 6.4Mpps | 8.2Mpps Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Jerome Glisse <jglisse@redhat.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: factor out setting vring addr and numJason Wang
Factoring vring address and num setting which needs special care for accelerating vq metadata accessing. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: introduce helpers to get the size of metadata areaJason Wang
To avoid code duplication since it will be used by kernel VA prefetching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()Jason Wang
Rename the function to be more accurate since it actually tries to prefetch vq metadata address in IOTLB. And this will be used by following patch to prefetch metadata virtual addresses. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: fine grain userspace memory accessorsJason Wang
This is used to hide the metadata address from virtqueue helpers. This will allow to implement a vmap based fast accessing to metadata. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: generalize adding used elemJason Wang
Use one generic vhost_copy_to_user() instead of two dedicated accessor. This will simplify the conversion to fine grain accessors. About 2% improvement of PPS were seen during vitio-user txonly test. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost: scsi: add weight supportJason Wang
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing scsi kthread from hogging cpu which is guest triggerable. This addresses CVE-2019-3900. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-27vhost: vsock: add weight supportJason Wang
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing vsock kthread from hogging cpu which is guest triggerable. The weight can help to avoid starving the request from on direction while another direction is being processed. The value of weight is picked from vhost-net. This addresses CVE-2019-3900. Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost_net: fix possible infinite loopJason Wang
When the rx buffer is too small for a packet, we will discard the vq descriptor and retry it for the next packet: while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk, &busyloop_intr))) { ... /* On overrun, truncate and discard */ if (unlikely(headcount > UIO_MAXIOV)) { iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1); err = sock->ops->recvmsg(sock, &msg, 1, MSG_DONTWAIT | MSG_TRUNC); pr_debug("Discarded rx packet: len %zd\n", sock_len); continue; } ... } This makes it possible to trigger a infinite while..continue loop through the co-opreation of two VMs like: 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the vhost process as much as possible e.g using indirect descriptors or other. 2) Malicious VM2 generate packets to VM1 as fast as possible Fixing this by checking against weight at the end of RX and TX loop. This also eliminate other similar cases when: - userspace is consuming the packets in the meanwhile - theoretical TOCTOU attack if guest moving avail index back and forth to hit the continue after vhost find guest just add new buffers This addresses CVE-2019-3900. Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short") Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost: introduce vhost_exceeds_weight()Jason Wang
We used to have vhost_exceeds_weight() for vhost-net to: - prevent vhost kthread from hogging the cpu - balance the time spent between TX and RX This function could be useful for vsock and scsi as well. So move it to vhost.c. Device must specify a weight which counts the number of requests, or it can also specific a byte_weight which counts the number of bytes that has been processed. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - enable packed ring support for s390 - several fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: enable packed ring virtio/s390: DMA support for virtio-ccw virtio/s390: use vring_create_virtqueue virtio/virtio_ring: do some comment fixes vhost-scsi: remove incorrect memory barrier tools/virtio/ringtest: Remove bogus definition of BUG_ON() virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-12vhost-scsi: remove incorrect memory barrierPaolo Bonzini
At this point, vs_tpg is not public at all; tv_tpg_vhost_count is accessed under tpg->tv_tpg_mutex; tpg->vhost_scsi is accessed under vhost_scsi_mutex. Therefor there are no atomic operations involved at all here, just remove the barrier. Reported-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2019-04-10vhost: reject zero size iova rangeJason Wang
We used to accept zero size iova range which will lead a infinite loop in translate_desc(). Fixing this by failing the request in this case. Reported-by: syzbot+d21e6e297322a900c128@syzkaller.appspotmail.com Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Several fixes, most notably fix for virtio on swiotlb systems" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: silence an unused-variable warning virtio: hint if callbacks surprisingly might sleep virtio-ccw: wire up ->bus_name callback s390/virtio: handle find on invalid queue gracefully virtio-ccw: diag 500 may return a negative cookie virtio_balloon: remove the unnecessary 0-initialization virtio-balloon: improve update_balloon_size_func virtio-blk: Consider virtio_max_dma_size() for maximum segment size virtio: Introduce virtio_max_dma_size() dma: Introduce dma_max_mapping_size() swiotlb: Add is_swiotlb_active() function swiotlb: Introduce swiotlb_max_mapping_size()
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-03-06vhost: silence an unused-variable warningArnd Bergmann
On some architectures, the MMU can be disabled, leading to access_ok() becoming an empty macro that does not evaluate its size argument, which in turn produces an unused-variable warning: drivers/vhost/vhost.c:1191:9: error: unused variable 's' [-Werror,-Wunused-variable] size_t s = vhost_has_feature(vq, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; Mark the variable as __maybe_unused to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-19vhost: correctly check the return value of translate_desc() in log_used()Jason Wang
When fail, translate_desc() returns negative value, otherwise the number of iovs. So we should fail when the return value is negative instead of a blindly check against zero. Detected by CoverityScan, CID# 1442593: Control flow issues (DEADCODE) Fixes: cc5e71075947 ("vhost: log dirty page correctly") Acked-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04scsi: target/core: Remove the write_pending_status() callback functionBart Van Assche
Due to the patch that makes TMF handling synchronous the write_pending_status() callback function is no longer called. Hence remove it. Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-28vhost: fix OOB in get_rx_bufs()Jason Wang
After batched used ring updating was introduced in commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"). We tend to batch heads in vq->heads for more than one packet. But the quota passed to get_rx_bufs() was not correctly limited, which can result a OOB write in vq->heads. headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx, vhost_len, &in, vq_log, &log, likely(mergeable) ? UIO_MAXIOV : 1); UIO_MAXIOV was still used which is wrong since we could have batched used in vq->heads, this will cause OOB if the next buffer needs more than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've batched 64 (VHOST_NET_BATCH) heads: Acked-by: Stefan Hajnoczi <stefanha@redhat.com> ============================================================================= BUG kmalloc-8k (Tainted: G B ): Redzone overwritten ----------------------------------------------------------------------------- INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674 kmem_cache_alloc_trace+0xbb/0x140 alloc_pd+0x22/0x60 gen8_ppgtt_create+0x11d/0x5f0 i915_ppgtt_create+0x16/0x80 i915_gem_create_context+0x248/0x390 i915_gem_context_create_ioctl+0x4b/0xe0 drm_ioctl_kernel+0xa5/0xf0 drm_ioctl+0x2ed/0x3a0 do_vfs_ioctl+0x9f/0x620 ksys_ioctl+0x6b/0x80 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201 INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for vhost-net. This is done through set the limitation through vhost_dev_init(), then set_owner can allocate the number of iov in a per device manner. This fixes CVE-2018-16880. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
2019-01-21Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: Use copy_to_iter() to send control queue response vhost: return EINVAL if iovecs size does not match the message size virtio-balloon: tweak config_changed implementation virtio: don't allocate vqs when names[i] = NULL virtio_pci: use queue idx instead of array idx to set up the vq virtio: document virtio_config_ops restrictions virtio: fix virtio_config_ops description
2019-01-17vhost: log dirty page correctlyJason Wang
Vhost dirty page logging API is designed to sync through GPA. But we try to log GIOVA when device IOTLB is enabled. This is wrong and may lead to missing data after migration. To solve this issue, when logging with device IOTLB enabled, we will: 1) reuse the device IOTLB translation result of GIOVA->HVA mapping to get HVA, for writable descriptor, get HVA through iovec. For used ring update, translate its GIOVA to HVA 2) traverse the GPA->HVA mapping to get the possible GPA and log through GPA. Pay attention this reverse mapping is not guaranteed to be unique, so we should log each possible GPA in this case. This fix the failure of scp to guest during migration. In -next, we will probably support passing GIOVA->GPA instead of GIOVA->HVA. Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Reported-by: Jintack Lim <jintack@cs.columbia.edu> Cc: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-14vhost/scsi: Use copy_to_iter() to send control queue responseBijan Mottahedeh
Uses copy_to_iter() instead of __copy_to_user() in order to ensure we support arbitrary layouts and an input buffer split across iov entries. Fixes: 0d02dbd68c47b ("vhost/scsi: Respond to control queue operations") Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14vhost: return EINVAL if iovecs size does not match the message sizePavel Tikhomirov
We've failed to copy and process vhost_iotlb_msg so let userspace at least know about it. For instance before these patch the code below runs without any error: int main() { struct vhost_msg msg; struct iovec iov; int fd; fd = open("/dev/vhost-net", O_RDWR); if (fd == -1) { perror("open"); return 1; } iov.iov_base = &msg; iov.iov_len = sizeof(msg)-4; if (writev(fd, &iov,1) == -1) { perror("writev"); return 1; } return 0; } Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-11vhost/vsock: fix vhost vsock cid hashing inconsistentZha Bin
The vsock core only supports 32bit CID, but the Virtio-vsock spec define CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as zero. This inconsistency causes one bug in vhost vsock driver. The scenarios is: 0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock object. And hash_min() is used to compute the hash key. hash_min() is defined as: (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)). That means the hash algorithm has dependency on the size of macro argument 'val'. 0. In function vhost_vsock_set_cid(), a 64bit CID is passed to hash_min() to compute the hash key when inserting a vsock object into the hash table. 0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min() to compute the hash key when looking up a vsock for an CID. Because the different size of the CID, hash_min() returns different hash key, thus fails to look up the vsock object for an CID. To fix this bug, we keep CID as u64 in the IOCTLs and virtio message headers, but explicitly convert u64 to u32 when deal with the hash table and vsock core. Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers") Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.tex Signed-off-by: Zha Bin <zhabin@linux.alibaba.com> Reviewed-by: Liu Jiang <gerry@linux.alibaba.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>