summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-06-10usb: gadget: r8a66597-udc: do not unlock unheld spinlock in ↵Alexey Khoroshilov
r8a66597_sudmac_irq() r8a66597_irq() processes sudmac part (r8a66597_sudmac_irq()) before locking r8a66597->lock. But transfer_complete(), that is called inside (r8a66597_sudmac_irq()->sudmac_finish()->transfer_complete()), expects r8a66597->lock is locked. As a result unheld spinlock can be unlocked. The patch just moves locking before calling r8a66597_sudmac_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-04usb: gadget: uvc: Implement videobuf2 .wait_prepare and .wait_finish operationsMichael Grzeschik
Those optional operations are used to release and reacquire the queue lock when videobuf2 needs to perform operations that sleep for a long time, such as waiting for a buffer to be complete. Implement them to avoid blocking qbuf or streamoff calls when a dqbuf is in progress. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-01usb: phy: omap-usb3: updated dpll M,N values to support DRA7xx devicesRuchika Kharwar
Addition of the M and N recommended values for the USB3 PHY DPLL. Sysclk for DRA7xx is 20MHz. This yields: Clk = 20MHz * M/(N+1) = 20MHz * 1000 /(7+1) = 2.5 Ghz Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-01usb: dwc3: remove redundant D0 power state setYijing Wang
Pci_enable_device() will set device power state to D0, so it's no need to do it again in dwc3_pci_probe(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: musb: host: fix build warningFelipe Balbi
very minor patch fixing the following build warning on a debug message: drivers/usb/musb/musb_host.c: In function ‘musb_host_rx’: drivers/usb/musb/musb_host.c:1763:4: warning: format ‘%x’ \ expects argument of type ‘unsigned int’, but argument \ 6 has type ‘dma_addr_t’ [-Wformat] Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: registering Tegra USB PHY as platform driverVenu Byravarasu
Registered Tegra USB PHY as a separate platform driver. To synchronize host controller and PHY initialization, used deferred probe mechanism. As PHY should be initialized before EHCI starts running, deferred probe of Tegra EHCI driver till PHY probe gets completed. Got rid of instance number based handling in host driver. Made use of DT params to get the PHY Pad registers. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: tegra: Add error handling & clean up.Venu Byravarasu
Check return values from all GPIO APIs and handle errors accordingly. Remove the call to clk_disable_unprepare(); this function does not prepare or enable the clock, so the error path should not disable or unprepare it. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: tegra: get ULPI reset GPIO info using DT.Venu Byravarasu
As GPIO information is avail through DT, used it to get Tegra ULPI reset GPIO number. Added a new member to tegra_usb_phy structure to store this number. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: tegra: Get PHY mode using DTVenu Byravarasu
Added a new PHY mode to support OTG. Obtained Tegra USB PHY mode using DT property. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: tegra: Return correct error value provided by clk_get_sysVenu Byravarasu
In case if clk_get_sys fails, return correct error value provided by the API. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Add support HSIC on Exynos4X12Dongjin Kim
This patch adds to enable High Speed Inter Chip on Exynos4X12. Both channels are controlled by usbphy driver based on the patch series of usbphy driver submitted by Tomasz Figa. [1] https://patchwork.kernel.org/patch/2576121 [2] https://patchwork.kernel.org/patch/2576131 [3] https://patchwork.kernel.org/patch/2576141 [4] https://patchwork.kernel.org/patch/2576151 [5] https://patchwork.kernel.org/patch/2576161 [6] https://patchwork.kernel.org/patch/2576171 Signed-off-by: Dongjin Kim <tobetter@gmail.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: phy-nop: Remove redundant use of of_match_ptrSachin Kamat
'nop_xceiv_dt_ids' is always compiled in. Hence use of of_match_ptr is unnecessary. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: pxa27x_udc: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: mv_u3d_core: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Add support for USB 2.0 PHY on Exynos 4x12Tomasz Figa
This patch adds driver data for Exynos 4x12 USB 2.0 PHY. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Pass enable/disable callbacks through driver dataTomasz Figa
To remove unnecessary if statements, this patch introduces phy_enable and phy_disable callbacks in driver data structure that implement SoC-specific PHY initialization and deinitialization. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Pass set_isolation callback through driver dataTomasz Figa
This patch extends driver data structure with set_isolation callback, which allows to remove the need for checking for SoC type in a switch statement. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Consolidate reference clock rate handlingTomasz Figa
This patch cleans up handling of reference clock rate in Samsung USB PHY drivers. It is mostly a cosmetic change but improves error handling in case of failing to get reference clock or invalid clock rate. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Use clk_get to get reference clockTomasz Figa
There is no need to use devm_clk_get to get a clock that is being put at the end of the function. This patch changes the code getting reference clock to use clk_get instead of useless in this case devm_clk_get. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: samsung: Select common driver part implicitlyTomasz Figa
Since phy-samsung-usb library can be used only by phy-samsung-usb2 and phy-samsung-usb3 drivers, there is no need to give explicit control over its Kconfig symbol. This patch makes CONFIG_SAMSUNG_USBPHY symbol hidden and selected implicitly by CONFIG_SAMSUNG_USB2PHY and CONFIG_SAMSUNG_USB3PHY. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add ab9540 supportFabio Baltieri
Add support for the ab9540 variant of the ab8500 family. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Cc: Avinash Kumar <avinash.kumar@stericsson.com> Cc: Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add ab8540 supportFabio Baltieri
Add support for the ab8540 variant of the ab8500 family. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Cc: Avinash Kumar <avinash.kumar@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add flag bits to control driver featuresFabio Baltieri
Introduce a "flags" field in "struct ab8500_usb" to allow controlling driver features and quirks depending on ab8500 chip variant and revision. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: move phy tuning values on separate functionsFabio Baltieri
Move each chip's PHY tuning value set code to a separate function to improve code readability. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add platform_device_id tableFabio Baltieri
Add an initial platform_device_id table to the ab8500-usb driver to allow probing additional variants of the ab8500 family chips. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: fix phy tuning value select logicFabio Baltieri
The driver supports both ab8500 and ab8505, but the actual phy tuning values logic sets ab8500 values: if (!is_ab8500_2p0_or_earlier(ab->ab8500)) which is supposed to set values for ab8500, but incorrectly results true for ab8505 too. Fix this by adding an additional is_ab8500(ab->ab8500) check. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: restart phy during probeSakethram Bommisetti
Add an ab8500_usb_restart_phy() function called during probe to ensure that the AB8500 USB phy is initialized properly even when a cable is connected at probe time. Without this fix subsequent host reconnections are not detected properly. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add transceiver clock controlMian Yousaf Kaukab
Add common clock support code for the ab8500-usb phy driver. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: various cosmetic fixes on ux500 filesFabio Baltieri
Various non functional coding style fixes on ux500_dma.c and phy-ab8500-usb.c drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: enable ux500 host side dma supportMian Yousaf Kaukab
Host side dma support for ux500 is enabled by piggybacking on Inventra dma support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: uvc: Remove unneeded endpoint descriptor fields initializationLaurent Pinchart
The streaming endpoint bandwidth parameters are computed are runtime from module parameters. Remove the corresponding static initializers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: eliminate musb_to_hcdDaniel Mack
With the hcd is now a direct member of struct musb, we can now simply eliminate the musb_to_hcd() macro. There aren't that many users left anyway, as some where already fixed up when parts were factored out to musb_host.c Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: use musb->port_modeDaniel Mack
Initialize the host and gadget subsystems of the musb driver only when the appropriate mode is selected from platform data, or device-tree information, respectively. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: re-introduce musb->port_modeDaniel Mack
Define MUSB_PORT_MODE_{HOST,GADGET,DUAL_ROLE} and store the platform-specified value in struct musb. Note that MUSB_PORT_MODE_HOST has to be set to 1 in order to match existing device tree bindings which are already documented but in fact unusued. For information on the bindings, please refer to Documentation/devicetree/bindings/usb/omap-usb.txt Documentation/devicetree/bindings/usb/am33xx-usb.txt Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: add musb_host_setup() and musb_host_cleanup()Daniel Mack
This patch re-introduces the bits that are necessary to use the musb controller in host mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modesDaniel Mack
This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: factor out hcd initalizationDaniel Mack
The musb struct is currently allocated along with the hcd, which makes it difficult to build a driver that only acts as gadget device. Fix this by allocating musb directly, and keep the hcd around as a pointer in the musb struct. struct hc_driver musb_hc_driver can now also be static to musb_host.c, and the macro musb_to_hcd() is just a pointer dereferencer for now, and will be eliminated later. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: move musb_start to musb_virthub.cDaniel Mack
This function has its only user in musb_virthub.c, so let's move it there and make it static. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: gadget: remove hcd initializationDaniel Mack
This will be done from a more appropriate location and as it doesn't work anyway, it can safely be removed before the other changes. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: factor some host-specific functionsDaniel Mack
In particular, this introduces musb_host_resume_root_hub()and musb_host_poke_root_hub() which will be stubbed out later. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: move function declarations to musb_{host,gadget}.hDaniel Mack
Let the function declarations live in the header files they belong to, which makes it easier to stub them out later. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: drop unused USB_GADGET_MUSB_HDRCDaniel Mack
The functionality meant to be represented by this symbol will be re-added later, but for now, USB_GADGET_MUSB_HDRC is in fact unused and can be dropped. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: remove 'ignore_disconnect' flagFelipe Balbi
This was related to an old bug on early versions of TUSB6010 which we don't support anymore. It's known to cause issues on several other situations with more recent devices so we better remove this flag now and come up with a better workaround should one be deemed necessary. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: fix incorrect usage of resource pointerFelipe Balbi
We can't simply pass the resource pointer from our device down to our children, otherwise module reinsertion will not work as the resource will continue to be marked as busy. Fix it by building a proper struct resource for our child musb device. Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-23Merge tag 'usb-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
2013-05-20USB: cxacru: potential underflow in cxacru_cm_get_array()Dan Carpenter
The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-18drivers/usb/phy: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-18drivers/usb/host: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-05-18drivers/usb/gadget: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 10:28:48 +0000