summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-09-17Merge tag 'fixes-for-v3.12-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.12-rc2 Here's first set of fixes for v3.12-rc series, patches have been soaking in linux-usb for a while now. We have the usual sparse and build warnings, a Kconfig fix to a mismerge on dwc3 Kconfig, fix for a possible memory leak in dwc3, s3c-hsotg won't disconnect when bus goes idle, locking fix in mv_u3d_core, endpoint disable fix in f_mass_storage. We also have one device ID added to dwc3's PCI glue layer in order to support Intel's BayTrail devices. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-09-17USB: pl2303: distinguish between original and cloned HX chipsFrank Schäfer
According to Prolific, several (unauthorized) cheap and less functional clones of the PL2303HX chip are in circulation. [1] I've had the chance to test such a cloned device and it turned out that it doesn't support any baud rates above 115200 baud (original: 6 Mbaud) It also doesn't support the divisior based baud rate encoding method, so no continuous baud rate adjustment is possible. Nevertheless, these devices have been working (unintentionally) with the driver up to commit 61fa8d694b ("pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips"), and this commit broke support for them. Fortunately, it is pretty simple to distinguish between the original and the cloned HX chips, so I've added a check and an extra chip type to keep the clones working. The same check is used by the latest Prolific Windows driver, so it should be solid. [1] http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41 Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17USB: Faraday fotg210: fix email addressesDave Jones
Update the MODULE_AUTHOR field of the Faraday OTG drivers to reflect current maintainers email address. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17USB: fix typo in usb serial simple driver KconfigDave Jones
Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17Revert "USB: EHCI: support running URB giveback in tasklet context"Greg Kroah-Hartman
This reverts commit 428aac8a81058e2303677a8fbf26670229e51d3a. This isn't quite ready for 3.12, we need some more EHCI driver changes that are just now showing up. So revert this for now, and queue it up later for 3.13. Reported-by: Alan Stern <stern@rowland.harvard.edu> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intrChanho Park
DWC2 databook indicates if the core sets "ErlySusp" bit, an idle state has been detected on the USB for 3 ms. This situation can be occurred when waiting a request from user daemon. So, we should keep the connection between udc and gadget even though this interrupt is occurred. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: s3c-hsotg: fix unregistration functionMarek Szyprowski
After driver conversion to udc_start/udc_stop infrastructure (commit "usb:hsotg:samsung: Use new udc_start and udc_stop callbacks" f65f0f1098) the gadget unregistration function is almost always called with 'driver' parameter being NULL, what caused that the unregistration code has not been executed at all. This is a leftover from the earlier verison of this function (which used simple start/stop interface), where driver parameter was obligatory. This patch removes the NULL check for the 'driver' pointer and removes all dereferences of it. It also moves disabling voltage regulators out of the atomic context, because handling regulators (which are usually i2c devices) might require sleeping. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: f_mass_storage: reset endpoint driver data when disabledPeter Oh
Gadgets endpoint driver data is a criteria to judge that whether the endpoints are in use or not. When gadget gets assigned an endpoint from endpoint list, they check its driver data if the driver data is NULL. If the driver data is not NULL then they regard it as in use. Therefore all of gadgets should reset their endpoints driver data to NULL as they are disabled. Otherwise it causes a leak of endpoint resource. Signed-off-by: Peter Oh <poh@broadcom.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: host: fsl-mph-dr-of: Staticize local symbolsSachin Kamat
Local symbols used in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: f_eem: Staticize eem_allocSachin Kamat
'eem_alloc' is local to this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: f_ecm: Staticize ecm_allocSachin Kamat
'ecm_alloc' is local to this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: phy: omap-usb3: Fix return valueSachin Kamat
The function returns a pointer. Hence return NULL instead of 0. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: gadget: avoid memory leak when failing to allocate all epsDavid Cohen
If dwc3_gadget_init_endpoint() fails after allocate some of the eps, we need to free their memory to avoid leak. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: remove extcon dependencyHeikki Krogerus
It is required by the OMAP glue driver, but it already depends on it. The core driver should not depend on it. This will allow the use of the PCI glue driver again. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register()Chen Gang
They are only called by '__ref' function multi_bind(), and they will call '__init' functions, so recommend to let them '__ref' too. The related warnings: WARNING: drivers/usb/gadget/g_multi.o(.text+0xded6): Section mismatch in reference from the variable .LM2921 to the variable .init.text:_rndis_do_config The function .LM2921() references the variable __init _rndis_do_config. This is often because .LM2921 lacks a __init annotation or the annotation of _rndis_do_config is wrong. WARNING: drivers/usb/gadget/g_multi.o(.text+0xdf16): Section mismatch in reference from the variable .LM2953 to the variable .init.text:_cdc_do_config The function .LM2953() references the variable __init _cdc_do_config. This is often because .LM2953 lacks a __init annotation or the annotation of _cdc_do_config is wrong. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: pci: add support for BayTrailHeikki Krogerus
Add PCI id for Intel BayTrail. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: cdc2: fix conversion to new interface of f_ecmAndrzej Pietrasiewicz
This fixes commit a38a275030086d95306555e544fc7c0e65ccd00e (usb: gadget: cdc2: convert to new interface of f_ecm) The invocation of usb_get_function_instance() is in cdc_bind() and should not be repeated in cdc_do_config(). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: fix a bug and a WARN_ON in dummy-hcdAlan Stern
This patch fixes a NULL pointer dereference and a WARN_ON in dummy-hcd. These things were the result of moving to the UDC core framework, and possibly of changes to that framework. Now unloading a gadget driver causes the UDC to be stopped after the gadget driver is unbound, not before. Therefore the "driver" argument to dummy_udc_stop() can be NULL, so we must not try to print the driver's name without checking first. Also, the UDC framework automatically unregisters the gadget when the UDC is deleted. Therefore a sysfs attribute file attached to the gadget must be removed before the UDC is deleted, not after. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: gadget: mv_u3d_core: fix violation of locking discipline in ↵Alexey Khoroshilov
mv_u3d_ep_disable() mv_u3d_nuke() expects to be calles with ep->u3d->lock held, because mv_u3d_done() does. But mv_u3d_ep_disable() calls it without lock that can lead to unpleasant consequences. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-13Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds
Pull aio changes from Ben LaHaise: "First off, sorry for this pull request being late in the merge window. Al had raised a couple of concerns about 2 items in the series below. I addressed the first issue (the race introduced by Gu's use of mm_populate()), but he has not provided any further details on how he wants to rework the anon_inode.c changes (which were sent out months ago but have yet to be commented on). The bulk of the changes have been sitting in the -next tree for a few months, with all the issues raised being addressed" * git://git.kvack.org/~bcrl/aio-next: (22 commits) aio: rcu_read_lock protection for new rcu_dereference calls aio: fix race in ring buffer page lookup introduced by page migration support aio: fix rcu sparse warnings introduced by ioctx table lookup patch aio: remove unnecessary debugging from aio_free_ring() aio: table lookup: verify ctx pointer staging/lustre: kiocb->ki_left is removed aio: fix error handling and rcu usage in "convert the ioctx list to table lookup v3" aio: be defensive to ensure request batching is non-zero instead of BUG_ON() aio: convert the ioctx list to table lookup v3 aio: double aio_max_nr in calculations aio: Kill ki_dtor aio: Kill ki_users aio: Kill unneeded kiocb members aio: Kill aio_rw_vect_retry() aio: Don't use ctx->tail unnecessarily aio: io_cancel() no longer returns the io_event aio: percpu ioctx refcount aio: percpu reqs_available aio: reqs_active -> reqs_available aio: fix build when migration is disabled ...
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "Here's the powerpc batch for this merge window. Some of the highlights are: - A bunch of endian fixes ! We don't have full LE support yet in that release but this contains a lot of fixes all over arch/powerpc to use the proper accessors, call the firmware with the right endian mode, etc... - A few updates to our "powernv" platform (non-virtualized, the one to run KVM on), among other, support for bridging the P8 LPC bus for UARTs, support and some EEH fixes. - Some mpc51xx clock API cleanups in preparation for a clock API overhaul - A pile of cleanups of our old math emulation code, including better support for using it to emulate optional FP instructions on embedded chips that otherwise have a HW FPU. - Some infrastructure in selftest, for powerpc now, but could be generalized, initially used by some tests for our perf instruction counting code. - A pile of fixes for hotplug on pseries (that was seriously bitrotting) - The usual slew of freescale embedded updates, new boards, 64-bit hiberation support, e6500 core PMU support, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc: Correct FSCR bit definitions powerpc/xmon: Fix printing of set of CPUs in xmon powerpc/pseries: Move lparcfg.c to platforms/pseries powerpc/powernv: Return secondary CPUs to firmware on kexec powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32 powerpc: Cleanup handling of the DSCR bit in the FSCR register powerpc/pseries: Child nodes are not detached by dlpar_detach_node powerpc/pseries: Add mising of_node_put in delete_dt_node powerpc/pseries: Make dlpar_configure_connector parent node aware powerpc/pseries: Do all node initialization in dlpar_parse_cc_node powerpc/pseries: Fix parsing of initial node path in update_dt_node powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header powerpc/pseries: Fix over writing of rtas return code in update_dt_node powerpc/pseries: Fix creation of loop in device node property list powerpc: Skip emulating & leave interrupts off for kernel program checks powerpc: Add more exception trampolines for hypervisor exceptions powerpc: Fix location and rename exception trampolines powerpc: Add more trap names to xmon powerpc/pseries: Add a warning in the case of cross-cpu VPA registration powerpc: Update the 00-Index in Documentation/powerpc ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-03Merge tag 'char-misc-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here is the big char/misc driver pull request for 3.12-rc1 Lots of driver updates all over the char/misc tree, full details in the shortlog" * tag 'char-misc-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (62 commits) drivers: uio: Kconfig: add MMU dependancy for UIO drivers: uio: Add driver for Humusoft MF624 DAQ PCI card drivers: uio_pdrv_genirq: use dev_get_platdata() drivers: uio_pruss: use dev_get_platdata() drivers: uio_dmem_genirq: use dev_get_platdata() drivers: parport: Kconfig: exclude h8300 for PARPORT_PC drivers: misc: ti-st: fix potential race if st_kim_start fails Drivers: hv: vmbus: Do not attempt to negoatiate a new version prematurely misc: vmw_balloon: Remove braces to fix build for clang. Drivers: hv: vmbus: Fix a bug in the handling of channel offers vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq() VMCI: Add support for virtual IOMMU VMCI: Remove non-blocking/pinned queuepair support uio: uio_pruss: remove unnecessary platform_set_drvdata() parport: amiga: remove unnecessary platform_set_drvdata() vme: vme_vmivme7805.c: add missing __iomem annotation vme: vme_ca91cx42.c: add missing __iomem annotation vme: vme_tsi148.c: add missing __iomem annotation drivers/misc/hpilo: Correct panic when an AUX iLO is detected uio: drop unused vma_count member in uio_device struct ...
2013-09-03Merge tag 'usb-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB driver pull request for 3.12-rc1 Lots of USB driver fixes and updates. Nothing major, just the normal xhci, gadget, and other driver changes. Full details in the shortlog" * tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (352 commits) usbcore: fix incorrect type in assignment in descriptors_changed() usbcore: compare and release one bos descriptor in usb_reset_and_verify_device() ehci: remove debugging statement with ehci statistics in ehci_stop() ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set ehci: remove ehci_vdbg() verbose debugging statements Documentation sysfs-bus-usb: Document which files are used by libusb Documentation sysfs-bus-usb: Document the speed file used by libusb Documentation sysfs-bus-usb: Move files with known users to stable USB: fix build error when CONFIG_PM_SLEEP isn't enabled usb: r8a66597-hcd: use platform_{get,set}_drvdata() usb: phy-tegra-usb: use platform_{get,set}_drvdata() usb: acm gadget: Null termintate strings table dma: cppi41: off by one in desc_to_chan() xhci: Fix warning introduced by disabling runtime PM. dev-core: fix build break when DEBUG is enabled USB: OHCI: Allow runtime PM without system sleep usb: ohci-at91: remove unnecessary dev_set_drvdata() usb: renesas_usbhs: use platform_{get,set}_drvdata() usb: fotg210-udc: use platform_{get,set}_drvdata() ...
2013-08-30usbcore: fix incorrect type in assignment in descriptors_changed()Xenia Ragiadakou
This patch fixes the incorrect assignment of a variable with type 'le16' to a variable with type 'unsigned int'. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usbcore: compare and release one bos descriptor in usb_reset_and_verify_device()Xenia Ragiadakou
In usb_reset_and_verify_device(), hub_port_init() allocates a new bos descriptor to hold the value read by the device. The new bos descriptor has to be compared with the old one in order to figure out if device 's firmware has changed in which case the device has to be reenumerated. In the original code, none of the two descriptors was deallocated leading to memory leaks. This patch compares the old bos descriptor with the new one to detect change in firmware and releases the newly allocated bos descriptor to prevent memory leak. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Tested-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove debugging statement with ehci statistics in ehci_stop()Xenia Ragiadakou
This patch removes the ehci statictics information output in ehci_stop() because they do not provide interesting info. At any case, the current statistics can be viewed by reading the 'registers' file in debugfs. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove duplicate debug_async_open() prototype in ehci-dbg.cXenia Ragiadakou
This patch removes the duplicate of debug_async_open() prototype following three lines below the debug_async_open() declaration. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is setXenia Ragiadakou
The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30ehci: remove ehci_vdbg() verbose debugging statementsXenia Ragiadakou
This patch removes ehci_vdbg debugging statements from EHCI host controller driver because they produce too much information, lowering the signal to noise ratio when debugging, and because they are not used anymore. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: r8a66597-hcd: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: phy-tegra-usb: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30usb: acm gadget: Null termintate strings tableGraham Williams
The gadget strings table should be null terminated. usb_gadget_get_string() loops through the table expecting a null at the end of the list. Signed-off-by: Graham Williams <gwilli@broadcom.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28Merge tag 'for-usb-next-2013-08-27-15-07' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xhci: Fix build breakage and new warnings. Hi Greg, This first patch should fix the build breakage Sedat Dilek reported. Apologizes for not including this patch before commit 0730d52a86919300a39a2be37f6c140997dfb82f "xhci:prevent "callbacks suppressed" when debug is not enabled" The second patch fixes a new build warning introduced by commit c8476fb855434c733099079063990e5bfa7ecad6 "usb: xhci: Disable runtime PM suspend for quirky controllers", which was caught by the 0day build system. Sarah Sharp
2013-08-28xhci: Fix warning introduced by disabling runtime PM.Sarah Sharp
The 0day build server caught a new build warning that is triggered when CONFIG_USB_DEFAULT_PERSIST is turned on: tree: git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci.git for-usb-next head: 0730d52a86919300a39a2be37f6c140997dfb82f commit: c8476fb855434c733099079063990e5bfa7ecad6 [1/3] usb: xhci: Disable runtime PM suspend for quirky controllers config: i386-randconfig-r6-0826 (attached as .config) All warnings: drivers/usb/host/xhci.c: In function 'xhci_free_dev': >> drivers/usb/host/xhci.c:3560:17: warning: unused variable 'dev' [-Wunused-variable] struct device *dev = hcd->self.controller; ^ drivers/usb/host/xhci.c: In function 'xhci_alloc_dev': >> drivers/usb/host/xhci.c:3648:17: warning: unused variable 'dev' [-Wunused-variable] struct device *dev = hcd->self.controller; ^ vim +/dev +3560 drivers/usb/host/xhci.c 3554 * disabled. Free any HC data structures associated with that device. 3555 */ 3556 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) 3557 { 3558 struct xhci_hcd *xhci = hcd_to_xhci(hcd); 3559 struct xhci_virt_device *virt_dev; > 3560 struct device *dev = hcd->self.controller; 3561 unsigned long flags; 3562 u32 state; 3563 int i, ret; 3564 3565 #ifndef CONFIG_USB_DEFAULT_PERSIST 3566 /* 3567 * We called pm_runtime_get_noresume when the device was attached. 3568 * Decrement the counter here to allow controller to runtime suspend 3569 * if no devices remain. 3570 */ 3571 if (xhci->quirks & XHCI_RESET_ON_RESUME) 3572 pm_runtime_put_noidle(dev); 3573 #endif 3574 ... 3641 /* 3642 * Returns 0 if the xHC ran out of device slots, the Enable Slot command 3643 * timed out, or allocating memory failed. Returns 1 on success. 3644 */ 3645 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) 3646 { 3647 struct xhci_hcd *xhci = hcd_to_xhci(hcd); > 3648 struct device *dev = hcd->self.controller; 3649 unsigned long flags; 3650 int timeleft; 3651 int ret; Fix this. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Shawn Nematbakhsh <shawnn@chromium.org>
2013-08-27USB: OHCI: Allow runtime PM without system sleepAlan Stern
Since ohci-hcd supports runtime PM, the .pm field in its pci_driver structure should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. Without this change, OHCI controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27usb: ohci-at91: remove unnecessary dev_set_drvdata()Libo Chen
Unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27usb: renesas_usbhs: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27usb: fotg210-udc: use platform_{get,set}_drvdata()Libo Chen
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27Merge tag 'usb-for-v3.12-part2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.12 merge window (part 2) Here's a set of important fixes for v3.12 merge window which have been pending in the mailing list for quite some time. We have use-after-free fixes, signedness fixes, more of HAS_DMA dependencies, fixes for NULL pointer deferences, build fixes and some other fixes to the musb driver caused by recent patches. Patches are quite small and contain valuable fixes which will give us a much better -rc1 release. Please consider merging Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-08-27USB storage: audit sysfs attribute permissionsGreg Kroah-Hartman
Convert the usbsorage sysfs attribute to use the _RW macro to make it easier to determine the permissions for the file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27usb: musb: ux500: Add check for NULL board dataLee Jones
Dan Carpenter's automatic Smatch checker found an anomaly in the ux500 MUSB driver, whereby board data was checked before use in all but one occasion. It is believed that it needs to be checked every time. Smatch complaint: drivers/usb/musb/ux500_dma.c:335 ux500_dma_controller_start() error: we previously assumed 'data' could be null (see line 313) Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27usb: gadget: double unlocks on error in atmel_usba_start()Dan Carpenter
The "goto out" statements were wrong. We aren't holding any locks at that point so we should return directly. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27usb: phy: signedness bugs in suspend/resume functionsDan Carpenter
"ret" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27usb: gadget: gadgetfs: potential use after free in unbind()Dan Carpenter
ffs_data_put() can sometimes free "ffs" so I have moved the call down a line below the dereference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27usb: gadget: gadgetfs: use after free in dev_release()Dan Carpenter
The call to put_dev() releases "dev". Hopefully, we don't need to set the state to STATE_DEV_DISABLED anyway so I have removed those lines. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27Merge tag 'for-usb-next-2013-08-27' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xhci: Bug fixes for 3.12. Hi Greg, Here's three low-priority bug fixes that should be queued for 3.12. They disable runtime PM for hosts that need the XHCI_RESET_ON_RESUME quirk, fix USB 2.0 Link PM on hosts that don't have BESL support, and prevent a bunch of log spam. Please pull into usb-next for 3.12. Sarah Sharp
2013-08-27usb: dwc3: Remove duplicate inclusion of otg.hSachin Kamat
otg.h header file was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27usb: phy: fix build breakageAnatolij Gustschin
Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c) renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h but changed drivers/usb/phy/phy-fsm-usb.c to include not existing "phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building: ... drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1 This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting in another build breakage: ... In file included from drivers/usb/phy/phy-fsl-usb.c:46:0: drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory compilation terminated. make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1 Fix both issues. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com>