summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-19Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits) ARM: remove 'select GENERIC_TIME' ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO ARM: 6074/1: oprofile: convert from sysdev to platform device ARM: 6073/1: oprofile: remove old files and update KConfig ARM: 6072/1: oprofile: use perf-events framework as backend ARM: 6071/1: perf-events: allow modules to query the number of hardware counters ARM: 6070/1: perf-events: add support for xscale PMUs ARM: 6069/1: perf-events: use numeric ID to identify PMU ARM: 6064/1: pmu: register IRQs at runtime ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA ARM: 6134/1: Handle instruction cache maintenance fault properly ARM: nwfpe: allow debugging output to be configured at runtime ARM: rename mach_cpu_disable() to platform_cpu_disable() ARM: 6132/1: PL330: Add common core driver ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310 ARM: Move memory mapping into mmu.c ARM: Ensure meminfo is sorted prior to sanity_check_meminfo ARM: Remove useless linux/bootmem.h includes ARM: convert /proc/cpu/aligment to seq_file arm: use asm-generic/scatterlist.h ...
2010-05-17Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/include/asm/system.h arch/arm/mm/Kconfig
2010-05-15Fix the regression created by "set S_DEAD on unlink()..." commitAl Viro
1) i_flags simply doesn't work for mount/unlink race prevention; we may have many links to file and rm on one of those obviously shouldn't prevent bind on top of another later on. To fix it right way we need to mark _dentry_ as unsuitable for mounting upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and i_mutex on the inode in question. Set it (with dont_mount(dentry)) in unlink/rmdir/etc., check (with cant_mount(dentry)) in places in namespace.c that used to check for S_DEAD. Setting S_DEAD is still needed in places where we used to set it (for directories getting killed), since we rely on it for readdir/rmdir race prevention. 2) rename()/mount() protection has another bogosity - we unhash the target before we'd checked that it's not a mountpoint. Fixed. 3) ancient bogosity in pivot_root() - we locked i_mutex on the right directory, but checked S_DEAD on the different (and wrong) one. Noticed and fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-10fix "seperate" typos in commentsAnand Gadiyar
s/seperate/separate Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-10pcmcia: dev_node removal (drivers with updated printk call)Dominik Brodowski
As a second step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, except one printk() which can easily be replaced by a dev_info()/dev_warn() call. CC: Harald Welte <laforge@gnumonks.org> CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-usb@vger.kernel.org Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: re-work pcmcia_request_irq()Dominik Brodowski
Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-05ARM: 5966/1: at91_udc HW glitchHarro Haan
Add some delay to avoid reading CSR TXCOUNT too early after updating it. For more info about this HW glitch see: http://lists.arm.linux.org.uk/lurker/message/20090325.150843.f515c02f.en.html http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100129/10ba0f8b/attachment.el http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/09cdb3b4/attachment.el http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/08b5b249/attachment.el First applied: "Fix soft lockup in at91 udc driver" http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=5965 Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Harro Haan <hrhaan@gmail.com> Acked-by: Remy Bohmer <linux@bohmer.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-30USB: sl811-hcd: Fix device disconnectMichael Hennerich
A while ago I provided a patch that fixed device detection after device removal (USB: sl811-hcd: Fix device disconnect). Chris Brissette pointed out that the detection/removal counter method to distinguish insert or remove my fail under certain conditions. Latest SL811HS datasheet (Document 38-08008 Rev. *D) indicates that bit 6 (SL11H_INTMASK_RD) of the Interrupt Status Register together with bit 5 (SL11H_INTMASK_INSRMV) can be used to determine whether a device has been inserted or removed. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ohci-at91: fix power management hangingPatrice Vilchez
A hanging has been detected in ohci-at91 while going in suspend to ram. This is due to asynchronous operations between ohci reset and ohci clocks shutdown. This patch adds the reading of the control register between the reset of the ohci and clocks stop. This "flush the writes" idea was taken from ohci-hcd.c file (ohci_shutdown() function). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: rename usb_buffer_alloc() and usb_buffer_free()Daniel Mack
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. [added compatibility macros so we can convert things easier - gregkh] Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: ti_usb: fix printk format warningRandy Dunlap
Fix printk format warning in usbserial/ti_usb: drivers/usb/serial/ti_usb_3410_5052.c:1738: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: gadget: s3c-hsotg: Add missing unlockJulia Lawall
In an error handling case the lock is not unlocked. The return is converted to a goto, to share the unlock at the end of the function. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * spin_lock_irqsave (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: fix build on OMAPs if CONFIG_PM_RUNTIME is not setAnand Gadiyar
With patch as1329 (USB: convert to the runtime PM framework), we make USB_SUSPEND depend on PM_RUNTIME instead of CONFIG_PM. Also, CONFIG_USB_OTG selects CONFIG_USB_SUSPEND. If PM_RUNTIME is not enabled, and we try to enable USB_OTG, we will end up with CONFIG_USB_SUSPEND selected. This is due to a known bug with the select statement. This makes the build break on various OMAP configs (which have CONFIG_USB_OTG set by default, but do not yet have CONFIG_PM_RUNTIME enabled). Avoid this by changing the logic for CONFIG_USB_OTG from "select USB_SUSPEND" to "depends on USB_SUSPEND" Signed-off-by: Anand Gadiyar <gadiyar@ti.com> CC: Michal Marek <mmarek@suse.cz> CC: Tony Lindgren <tony@atomide.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: oxu210hp: release spinlock on error pathDan Carpenter
Smatch complained about this missing spinlock. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: option: add cinterion device idGreg Kroah-Hartman
This adds a device id for a Cinterion device. Reported-by: John Race <John.Race@roscom.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: option: ZTEAC8710 Support with Device ID 0xffffMahesh Kuruganti
PATCH TO EXTEND SUPPORT TO AC8710 WITH 0xFFFF Product ID. Signed-off-by: Mahesh Kuruganti <maheshkuruganti@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: serial: pl2303: Hybrid reader Uniform HCR331Simone Contini
I tried a magnetic stripe reader (http://www.kimaldi.com/kimaldi_eng/productos/lectores_de_tarjetas/lectores_tarjeta_chip_y_dni/lector_hibrido_uniform_hcr_331) and I see that it is interfaced with a PL2303. I wrote a patch to use your driver which simply adds the product ID for the device and it seems working fine. From: Simone Contini <s.contini@oltrelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: option: add ID for ZTE MF 330Dominik Brodowski
Based on the information provided for by Paweł Drobek, add a second vendor ID and the correct product ID for ZTE MF 330. Reported-by: Paweł Drobek <pawel.drobek@gmail.com> Signed-off: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: xhci: properly set endpoint context fields for periodic eps.Sarah Sharp
For periodic endpoints, we must let the xHCI hardware know the maximum payload an endpoint can transfer in one service interval. The xHCI specification refers to this as the Maximum Endpoint Service Interval Time Payload (Max ESIT Payload). This is used by the hardware for bandwidth management and scheduling of packets. For SuperSpeed endpoints, the maximum is calculated by multiplying the max packet size by the number of bursts and the number of opportunities to transfer within a service interval (the Mult field of the SuperSpeed Endpoint companion descriptor). Devices advertise this in the wBytesPerInterval field of their SuperSpeed Endpoint Companion Descriptor. For high speed devices, this is taken by multiplying the max packet size by the "number of additional transaction opportunities per microframe" (the high bits of the wMaxPacketSize field in the endpoint descriptor). For FS/LS devices, this is just the max packet size. The other thing we must set in the endpoint context is the Average TRB Length. This is supposed to be the average of the total bytes in the transfer descriptor (TD), divided by the number of transfer request blocks (TRBs) it takes to describe the TD. This gives the host controller an indication of whether the driver will be enqueuing a scatter gather list with many entries comprised of small buffers, or one contiguous buffer. It also takes into account the number of extra TRBs you need for every TD. This includes No-op TRBs and Link TRBs used to link ring segments together. Some drivers may choose to chain an Event Data TRB on the end of every TD, thus increasing the average number of TRBs per TD. The Linux xHCI driver does not use Event Data TRBs. In theory, if there was an API to allow drivers to state what their bandwidth requirements are, we could set this field accurately. For now, we set it to the same number as the Max ESIT payload. The Average TRB Length should also be set for bulk and control endpoints, but I have no idea how to guess what it should be. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: xhci: properly set the "Mult" field of the endpoint context.Sarah Sharp
A SuperSpeed interrupt or isochronous endpoint can define the number of "burst transactions" it can handle in a service interval. This is indicated by the "Mult" bits in the bmAttributes of the SuperSpeed Endpoint Companion Descriptor. For example, if it has a max packet size of 1024, a max burst of 11, and a mult of 3, the host may send 33 1024-byte packets in one service interval. We must tell the xHCI host controller the number of multiple service opportunities (mults) the device can handle when the endpoint is installed. We do that by setting the Mult field of the Endpoint Context before a configure endpoint command is sent down. The Mult field is invalid for control or bulk SuperSpeed endpoints. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: OHCI: don't look at the root hub to get the number of portsAlan Stern
This patch (as1371) fixes a small bug in ohci-hcd. The HCD already knows how many ports the controller has; there's no need to go looking at the root hub's usb_device structure to find out. Especially since the root hub's maxchild value is set correctly only while the root hub is bound to the hub driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: don't choose configs with no interfacesAlan Stern
This patch (as1372) fixes a bug in the routine that chooses the default configuration to install when a new USB device is detected. The algorithm is supposed to look for a config whose first interface is for a non-vendor-specific class. But the way it's currently written, it will also accept a config with no interfaces at all, which is not very useful. (Believe it or not, such things do exist.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andrew Victor <avictor.za@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: cdc-acm: add another device quirkRuss Nelson
The Maretron USB100 needs this quirk in order to work properly. Signed-off-by: Russ Nelson <nelson@crynwr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30USB: fix testing the wrong variable in fs_create_by_name()Dan Carpenter
There is a typo here. We should be testing "*dentry" which was just assigned instead of "dentry". This could result in dereferencing an ERR_PTR inside either usbfs_mkdir() or usbfs_create(). Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30usb: Fix tusb6010 for DMA APITony Lindgren
Commit 18eabe2347ae7a11b3db768695913724166dfb0e introduced DMA buffer ownership. Fix tusb6010 accordingly. To compile, also dummy musb_platform_save and restore functions need to be added. Also change the order of musb_read_fifo() to happen after dma_cache_maint to have the DMA operations completed before moving the remaining unaligned bytes with PIO. The DMA access and PIO touch different areas of the FIFO, so this change only makes the code a bit easier to follow. Tested on n810 and g_ether with variable size ping test. The test seems to fail for some ping sizes, but that seems to be a different problem. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: fix musb_init_controller() error cleanup pathSergei Shtylyov
This function forgets to call usb_remove_hcd() or musb_gadget_cleanup() iff sysfs_create_group() fails. [ felipe.balbi@nokia.com : review the entire error path not only when we fail hcd or gadget ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: fix DaVinci glue layer dependencySergei Shtylyov
CONFIG_ARCH_DAVINCI now embraces both the "real" DaVinci and DA8xx/OMAP-L1x -- on which the DaVinci glue layer won't work. Change the Makefile dependency to CONFIG_ARCH_DAVINCI_DMx which corresponds to "real" DaVinci. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't call musb_platform_exit() twiceSergei Shtylyov
musb_platform_exit() is called twice from musb_init_controller() iff controller initialization fails. Move the call (and the DevCtl register writes surrounding it) from musb_free() to musb_remove(). Fix mispalced and now incorrect 'goto's in musb_init_controller(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: OMAP: don't call clk_put()Sergei Shtylyov
Remove duplicate/unbalanced call to clk_put() from musb_platform_exit() -- clk_put() gets called from musb_core.c anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: DaVinci: fix musb_platform_init() error cleanup pathSergei Shtylyov
This function forgets to call clk_disable() iff reading the USB module version register returns 0. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't prevent disabling clock on driver unloadSergei Shtylyov
Resetting 'musb->clock' to NULL in musb_shutdown() prevents musb_platform_exit() from properly disabling the clock when unloading the driver -- don't do it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb_core: don't touch 'musb->clock' in musb_free()Sergei Shtylyov
Remove duplicate/unbalanced calls to clk_disable()/clk_put() in musb_free(): - clk_disable() is called by musb_platform_exit() just prior to this call; - clk_put() is called by the callers of musb_free() prior to calling it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: potential use after freeDan Carpenter
We assign "urb->hcpriv = qh;" a few lines down. I'm pretty sure we want it "urb->hcpriv" to be NULL not a freed value. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: save and restore missing bus control registerAjay Kumar Gupta
Added the missing BUS_CONTROL register in musb save/restore routines. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: Blackfin: don't fake blackfin_interrupt() resultSergei Shtylyov
Commit a5073b52833e4df8e16c93dc4cbb7e0c558c74a2 (musb_gadget: fix unhandled endpoint 0 IRQs) misses this change to blackfin.c: stop faking successful result of blackfin_interrupt() and emitting a debug message on an unhandled interrupt. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-23Merge branch 'master' into for-nextJiri Kosina
2010-04-22usb: Increase timeout value for device resetDinh Nguyen
It seems that for USB IP on Freescale MX5x processors, it needs >750 usec for the reset to complete. This change should not hurt any other EHCI hardware. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: put claimed interfaces in the "suspended" stateAlan Stern
This patch (as1370) fixes a bug in the USB runtime power management code. When a driver claims an interface, it doesn't expect to need to call usb_autopm_get_interface() or usb_autopm_put_interface() for runtime PM to work. Runtime PM can be controlled by the driver's primary interface; the additional interfaces it claims shouldn't interfere. As things stand, the claimed interfaces will prevent the device from autosuspending. To fix this problem, the patch sets interfaces to the suspended state when they are claimed. Also, although in theory this shouldn't matter, the patch changes the suspend code so that interfaces are suspended in reverse order from detection and resuming. This is how the PM core works, and we ought to use the same approach. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Debugged-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: EHCI: defer reclamation of siTDsAlan Stern
This patch (as1369) fixes a problem in ehci-hcd. Some controllers occasionally run into trouble when the driver reclaims siTDs too quickly. This can happen while streaming audio; it causes the controller to crash. The patch changes siTD reclamation to work the same way as iTD reclamation: Completed siTDs are stored on a list and not reused until at least one frame has passed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nate Case <ncase@xes-inc.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fix remote wakeup settings during system sleepAlan Stern
This patch (as1363) changes the way USB remote wakeup is handled during system sleeps. It won't be enabled unless an interface driver specifically needs it. Also, it won't be enabled during the FREEZE or QUIESCE phases of hibernation, when the system doesn't respond to wakeup events anyway. Finally, if the device is already runtime-suspended with remote wakeup enabled, but wakeup is supposed to be disabled for the system sleep, the device gets woken up so that it can be suspended again with the proper wakeup setting. This will fix problems people have reported with certain USB webcams that generate wakeup requests when they shouldn't, and as a result cause system suspends to fail. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/515109 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Erik Andrén <erik.andren@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: pl2303: add AdLink ND-6530 USB IDsManuel Jander
I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485 isolated adapter is actually a PL2303 based usb serial adapter. I tried it out, and as far as I can tell it works. Signed-off-by: Manuel Jander <manuel.jander@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.William Lightning
Signed-off-by: William Lightning <kassah@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: OHCI: DA8xx/OMAP-L1x: fix up macro renameSergei Shtylyov
It appears that the DA8xx/OMAP-L1x glue layer went into the kernel uncompilable: commit 1960e693ac12ae5fe518309d6a63a44c93fad9e7 (davinci: da8xx/omapl1: add support for the second sysconfig module) has renamed DA8XX_SYSCFG_* macros to DA8XX_SYSCFG0_* and it's been committed before the glue layer... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: qcaux: add LG Rumor and Sanyo Katana LX device IDsDan Williams
These phones also have the familiar ttyACM0/ttyUSB0 schizophrenia when placed into "Dial-up Networking" mode after connecting a USB cable. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22usb: wusb: don't overflow the Keep Alive IE bufferDavid Vrabel
The Keep Alive IE only has space for WUIE_ELT_MAX (== 4) device addresses. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ehci: omap: fix kernel panic with rmmodAjay Kumar Gupta
Sets the regulator values to NULL if they are not defined. This is required to fix the kernel panic in exit path when EHCI module is removed on the platforms where EHCI regulator are not set. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fixed bug in usbsevseg using USB autosuspend incorrectlyHarrison Metzger
This patch fixes a bug with the usbsevseg driver which assumed that USB autosuspend will always be used. Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ti_usb_3410_5052: adding multitech dialup fax/modem devicesAlex Manoussakis
The following patch adds support for Multitech Systems' MT9234MU and MT9234ZBA usb dialup fax modems. It is based on a patch and firmware provided to me by Multitech Systems' support, after I reported to them that my MT9234MU modem was not working with recent linux kernels. Signed-off-by: Alex Manoussakis <alex@juniper.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 05:49:12 +0000