summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2021-04-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
2021-04-28Merge tag 'sched-core-2021-04-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces to a unified debugfs interface. - Signals: Allow caching one sigqueue object per task, to improve performance & latencies. - Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups. - Improve energy-aware scheduling - Improve the PELT metrics for certain workloads - Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous regressions - Add 'scheduler latency debugging': warn after long periods of pending need_resched. This is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature, or the use of the resched_latency_warn_ms=xx boot parameter. - CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining balance_push() vs. hotplug holes/races - PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well - Fix/improve various load-balancing corner cases vs. capacity margins - Fix sched topology on systems with NUMA diameter of 3 or above - Fix PF_KTHREAD vs to_kthread() race - Minor rseq optimizations - Misc cleanups, optimizations, fixes and smaller updates * tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) cpumask/hotplug: Fix cpu_dying() state tracking kthread: Fix PF_KTHREAD vs to_kthread() race sched/debug: Fix cgroup_path[] serialization sched,psi: Handle potential task count underflow bugs more gracefully sched: Warn on long periods of pending need_resched sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning sched/debug: Rename the sched_debug parameter to sched_verbose sched,fair: Alternative sched_slice() sched: Move /proc/sched_debug to debugfs sched,debug: Convert sysctl sched_domains to debugfs debugfs: Implement debugfs_create_str() sched,preempt: Move preempt_dynamic to debug.c sched: Move SCHED_DEBUG sysctl to debugfs sched: Don't make LATENCYTOP select SCHED_DEBUG sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG sched: Use cpu_dying() to fix balance_push vs hotplug-rollback cpumask: Introduce DYING mask cpumask: Make cpu_{online,possible,present,active}() inline rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs() ...
2021-04-26Merge tag 'usb-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1. Lots of little things in here, with loads of tiny fixes and cleanups over these drivers, as well as these "larger" changes: - thunderbolt updates and new features added - xhci driver updates and split out of a mediatek-specific xhci driver from the main xhci module to make it easier to work with (something that I have been wanting for a while). - loads of typec feature additions and updates - dwc2 driver updates - dwc3 driver updates - gadget driver fixes and minor updates - loads of usb-serial cleanups and fixes and updates - usbip documentation updates and fixes - lots of other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits) usb: Fix up movement of USB core kerneldoc location usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability usb: dwc3: Capture new capability register GHWPARAMS9 usb: gadget: prevent a ternary sign expansion bug usb: dwc3: core: Do core softreset when switch mode usb: dwc2: Get rid of useless error checks in suspend interrupt usb: dwc2: Update dwc2_handle_usb_suspend_intr function. usb: dwc2: Add exit hibernation mode before removing drive usb: dwc2: Add hibernation exiting flow by system resume usb: dwc2: Add hibernation entering flow by system suspend usb: dwc2: Allow exit hibernation in urb enqueue usb: dwc2: Move exit hibernation to dwc2_port_resume() function usb: dwc2: Move enter hibernation to dwc2_port_suspend() function usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated. usb: dwc2: Clear fifo_map when resetting core. usb: dwc2: Allow exiting hibernation from gpwrdn rst detect usb: dwc2: Fix hibernation between host and device modes. usb: dwc2: Fix host mode hibernation exit with remote wakeup flow. usb: dwc2: Reset DEVADDR after exiting gadget hibernation. usb: dwc2: Update exit hibernation when port reset is asserted ...
2021-04-26Merge tag 'tty-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.13-rc1. Actually busy this release, with a number of cleanups happening: - much needed core tty cleanups by Jiri Slaby - removal of unused and orphaned old-style serial drivers. If anyone shows up with this hardware, it is trivial to restore these but we really do not think they are in use anymore. - fixes and cleanups from Johan Hovold on a number of termios setting corner cases that loads of drivers got wrong as well as removing unneeded code due to tty core changes from long ago that were never propagated out to the drivers - loads of platform-specific serial port driver updates and fixes - coding style cleanups and other small fixes and updates all over the tty/serial tree. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) serial: extend compile-test coverage serial: stm32: add FIFO threshold configuration dt-bindings: serial: 8250: update TX FIFO trigger level dt-bindings: serial: stm32: override FIFO threshold properties dt-bindings: serial: add RX and TX FIFO properties serial: xilinx_uartps: drop low-latency workaround serial: vt8500: drop low-latency workaround serial: timbuart: drop low-latency workaround serial: sunsu: drop low-latency workaround serial: sifive: drop low-latency workaround serial: txx9: drop low-latency workaround serial: sa1100: drop low-latency workaround serial: rp2: drop low-latency workaround serial: rda: drop low-latency workaround serial: owl: drop low-latency workaround serial: msm_serial: drop low-latency workaround serial: mpc52xx_uart: drop low-latency workaround serial: meson: drop low-latency workaround serial: mcf: drop low-latency workaround serial: lpc32xx_hs: drop low-latency workaround ...
2021-04-23usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capabilityThinh Nguyen
DWC_usb32 IP introduces a new behavior when handling NoStream event for IN endpoints. If the controller is capable of DEV_TXF_FLUSH_BYPASS, then the driver does not need to force to restart stream for IN endpoints. The controller will generate ERDY and restart the stream periodically. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/65c3070c666cd6b8beeee62d7f8e3e704ebf2d32.1619134559.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-23usb: dwc3: Capture new capability register GHWPARAMS9Thinh Nguyen
DWC_usb32 introduces a new HW capability register GHWPARAMS9. Capture this in the dwc->hwparams.hwparams9 field. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f76cc4a9c8c4ab325f5babe03c57b039166360b0.1619134559.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: gadget: prevent a ternary sign expansion bugDan Carpenter
The problem is that "req->actual" is a u32, "req->status" is an int, and iocb->ki_complete() takes a long. We would expect that a negative error code in "req->status" would translate to a negative long value. But what actually happens is that because "req->actual" is a u32, the error codes is type promoted to a high positive value and then remains a positive value when it is cast to long. (No sign expansion). We can fix this by casting "req->status" to long. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YIE7RrBPLWc3XtMg@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc3: core: Do core softreset when switch modeYu Chen
From: John Stultz <john.stultz@linaro.org> According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/20210108015115.27920-1-john.stultz@linaro.org/ [2] https://lore.kernel.org/linux-usb/0ba7a6ba-e6a7-9cd4-0695-64fc927e01f1@gmail.com/ Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ferry Toth <fntoth@gmail.com> Cc: Wesley Cheng <wcheng@codeaurora.org> Cc: <stable@vger.kernel.org> Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Wesley Cheng <wcheng@codeaurora.org> Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/374440f8dcd4f06c02c2caf4b1efde86774e02d9.1618521663.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Get rid of useless error checks in suspend interruptArtur Petrosyan
Squashed from Douglas Anderson's suggested commit "usb: dwc2: Get rid of useless error checks for hibernation/partial power down" - After this commit there should never be any case where dwc2_enter_partial_power_down() and dwc2_enter_hibernation() are called when 'params.power_down' is not correct. Get rid of the pile of error checking. - As part of this cleanup some of the error messages not to have __func__ in them. That's not needed for dev_err() calls since they already have the device name as part of the message. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210416124843.9EDCDA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Update dwc2_handle_usb_suspend_intr function.Artur Petrosyan
To avoid working in two modes (partial power down and hibernation) changed conditions for entering partial power down or hibernation. Instead of checking hw_params.power_optimized and hw_params.hibernation now checking power_down param which already set to one of the options (Hibernation or Partial Power Down) based on OTG_EN_PWROPT. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124835.9F257A005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Add exit hibernation mode before removing driveArtur Petrosyan
When dwc2 core is in hibernation mode loading driver again causes driver fail. Because in that mode registers are not accessible. In order to exit from hibernation checking dwc2 core power saving state in "dwc2_driver_remove()" function. If core is in hibernation, then checking the operational mode of the driver. To check whether dwc2 core is operating in host mode or device mode there is one way which is retrieving the backup value of "gotgctl" and compare the "CurMod" value. If previously core entered hibernation in host mode then the exit is performed for host if not then exit is performed for device mode. The introduced checking is because in hibernation state all registers are not accessible. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124827.9BB59A005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Add hibernation exiting flow by system resumeArtur Petrosyan
Adds a new flow of exiting hibernation when PC is resumed from suspend state. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124819.A3B26A005C@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Add hibernation entering flow by system suspendArtur Petrosyan
Adds a new flow of entering hibernation when PC is hibernated or suspended. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124811.BBFDBA005C@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Allow exit hibernation in urb enqueueArtur Petrosyan
When core is in hibernation state and an external hub is connected, upper layer sends URB enqueue request, which results in port reset issue. - Added exit from hibernation state to avoid port reset issue and process upper layer request properly. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124803.D1C1FA005F@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Move exit hibernation to dwc2_port_resume() functionArtur Petrosyan
This move is done to call hibernation exit handler in "dwc2_port_resume()" function when core receives port resume. Otherwise it could be confusing to exit hibernation in "dwc2_hcd_hub_control()" function but other power saving modes in "dwc2_port_resume()" function. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124755.E47F3A005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Move enter hibernation to dwc2_port_suspend() functionArtur Petrosyan
This move is done to call enter hibernation handler in "dwc2_port_suspend()" function when core receives port suspend. Otherwise it could be confusing to enter to hibernation in "dwc2_hcd_hub_control()" function but other power saving modes in "dwc2_port_suspend()" function. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124747.EE79EA005C@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.Artur Petrosyan
When hibernation exit is performed the dwc2_hib_restore_common() function is called. In that function we wait until GINTSTS_RESTOREDONE bit is set. However, after the setting of that bit we get a lot of (dwc2_hsotg_irq:) interrupts which indicates that (GINTSTS.RstrDoneInt) restore done interrupt is asserted. To avoid restore done interrupt storm after restore is generated clear GINTSTS_RESTOREDONE bit in GINTSTS register. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124739.D6269A005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Clear fifo_map when resetting core.Artur Petrosyan
Switching from device mode to host mode by disconnecting device cable core enters and exits form hibernation. However, the fifo map remains not cleared. It results to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/ gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2]) if in host mode we disconnect the micro a to b host cable. Because core reset occurs. To avoid the WARNING, fifo_map should be cleared in dwc2_core_reset() function by taking into account configs. fifo_map must be cleared only if driver is configured in "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE" mode. - Added "static inline void dwc2_clear_fifo_map()" helper function to clear fifo_map with peripheral or dual role mode. - Added a dummy version of "dwc2_clear_fifo_map()" helper for host-only mode. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124731.C500AA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Allow exiting hibernation from gpwrdn rst detectArtur Petrosyan
When device cable is disconnected core receives suspend interrupt and enters hibernation. After entering into hibernation GPWRDN_RST_DET and GPWRDN_STS_CHGINT interrupts are asserted. Allowed exit from gadget hibernation from GPWRDN_RST_DET by checking only linestate. Changed the return type of "dwc2_handle_gpwrdn_intr()" function from void to int because exit from hibernation functions have a return value. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124723.B6F17A005C@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Fix hibernation between host and device modes.Artur Petrosyan
When core is in hibernation in host mode and a device cable was connected then driver exited from device hibernation. However, registers saved for host mode and when exited from device hibernation register restore would be done for device register which was wrong because there was no device registers stored to restore. - Added dwc_handle_gpwrdn_disc_det() function which handles gpwrdn disconnect detect flow and exits hibernation without restoring the registers. - Updated exiting from hibernation in GPWRDN_STS_CHGINT with calling dwc_handle_gpwrdn_disc_det() function. Here no register is restored which is the solution described above. Fixes: 65c9c4c6b01f ("usb: dwc2: Add dwc2_handle_gpwrdn_intr() handler") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124715.75355A005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.Artur Petrosyan
Added setting "port_connect_status_change" flag to "1" in order to re-enumerate, because after exit from hibernation port connection status is not detected. Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124707.5EEC2A005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Reset DEVADDR after exiting gadget hibernation.Artur Petrosyan
Initially resetting device address was done in dwc2_hsotg_irq() interrupt handler. However, when core is hibernated USB RESET is not handled in dwc2_hsotg_irq() handler, instead USB RESET interrupt is handled in dwc2_handle_gpwrdn_intr() handler. - Added reset device address to zero when core exits from gadget hibernation. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124659.652CFA005C@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Update exit hibernation when port reset is assertedArtur Petrosyan
No need to check for "DWC2_POWER_DOWN_PARAM_HIBERNATION" param as "hsotg->hibernated" flag is already enough for exiting from hibernation mode. - Removes checking of "DWC2_POWER_DOWN_PARAM_HIBERNATION" param. - For code readability Hibernation exit code moved after debug message print. - Added "dwc2_exit_hibernation()" function error checking. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Link: https://lore.kernel.org/r/20210416124651.51C8DA005C@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22Merge tag 'usb-serial-5.13-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.13-rc1 Here are the USB-serial updates for 5.13-rc1, including: - better type detection for pl2303 - support for more line speeds for pl2303 (TA/TB) - fixed CSIZE handling for the new xr driver - core support for multi-interface functions - TIOCGSERIAL and TIOCSSERIAL fixes - generic TIOCSSERIAL support (e.g. for closing_wait) - fixed return value for unsupported ioctls - support for gpio valid masks in cp210x - drain-delay fixes and improvements - support for multi-port devices for xr - generalisation of the xr driver to support three new device classes (XR21B142X, XR21B1411 and XR2280X) Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (72 commits) USB: cdc-acm: add more Maxlinear/Exar models to ignore list USB: serial: xr: add copyright notice USB: serial: xr: reset FIFOs on open USB: serial: xr: add support for XR22801, XR22802, XR22804 USB: serial: xr: add support for XR21B1411 USB: serial: xr: add support for XR21B1421, XR21B1422 and XR21B1424 USB: serial: xr: add type abstraction USB: serial: xr: drop type prefix from shared defines USB: serial: xr: move pin configuration to probe USB: serial: xr: rename GPIO-pin defines USB: serial: xr: rename GPIO-mode defines USB: serial: xr: add support for XR21V1412 and XR21V1414 USB: serial: ti_usb_3410_5052: clean up termios CSIZE handling USB: serial: ti_usb_3410_5052: use kernel types consistently USB: serial: ti_usb_3410_5052: add port-command helpers USB: serial: ti_usb_3410_5052: clean up vendor-request helpers USB: serial: ti_usb_3410_5052: drop unnecessary packed attributes USB: serial: io_ti: drop unnecessary packed attributes USB: serial: io_ti: use kernel types consistently USB: serial: io_ti: add read-port-command helper ...
2021-04-22usb: dwc3: gadget: Remove FS bInterval_m1 limitationThinh Nguyen
The programming guide incorrectly stated that the DCFG.bInterval_m1 must be set to 0 when operating in fullspeed. There's no such limitation for all IPs. See DWC_usb3x programming guide section 3.2.2.1. Fixes: a1679af85b2a ("usb: dwc3: gadget: Fix setting of DEPCFG.bInterval_m1") Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/5d4139ae89d810eb0a2d8577fb096fc88e87bfab.1618472454.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: xhci-mtk: remove bus status checkChunfeng Yun
PM will take care of the status of child device, so no need check each port anymore. Suggested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618555706-6810-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc2: Enable RPi in ACPI modeJeremy Linton
The dwc2 driver has everything we need to run in ACPI mode except for the ACPI module device table boilerplate. With that added and identified as "BCM2848", an id in use by other OSs for this device, the dw2 controller on the BCM2711 will work. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Link: https://lore.kernel.org/r/20210413215834.3126447-2-jeremy.linton@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22USB: CDC-ACM: fix poison/unpoison imbalanceOliver Neukum
suspend() does its poisoning conditionally, resume() does it unconditionally. On a device with combined interfaces this will balance, on a device with two interfaces the counter will go negative and resubmission will fail. Both actions need to be done conditionally. Fixes: 6069e3e927c8f ("USB: cdc-acm: untangle a circular dependency between callback and softint") Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210421074513.4327-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22USB: Add reset-resume quirk for WD19's Realtek HubChris Chiu
Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work after the system resumes from suspend with remote wakeup enabled device connected: [ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71) [ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71) Information of this hub: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=5487 Rev= 1.47 S: Manufacturer=Dell Inc. S: Product=Dell dock C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms The failure results from the ETIMEDOUT by chance when turning on the suspend feature for the specified port of the hub. The port seems to be in an unknown state so the hub_activate during resume fails the hub_port_status, then the hub will fail to work. The quirky hub needs the reset-resume quirk to function correctly. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: gadget: net2272: remove redundant initialization of statusColin Ian King
The variable status is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed and move the declaration of status to the scope where it is used. Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210420110622.377339-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: storage: datafab: remove redundant assignment of variable resultColin Ian King
The variable result is being assigned with a value that is never read, the assignment is redundant and can be removed. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210420113818.378478-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: misc: adutux: fix whitespace coding style issueMalte Deiseroth
Correct missing space error ceckpatch.pl is complaining about. Signed-off-by: Malte Deiseroth <mdeiseroth88@gmail.com> Link: https://lore.kernel.org/r/20210416080843.GA137657@utop Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: musb: musb_core: Add space after that ','Saurav Girepunje
Fix Error reported by checkpatch.pl ERROR: space required after that ',' (ctx:VxV) +#define can_bulk_split(musb,type) \ ^ ERROR: space required after that ',' (ctx:VxV) +#define can_bulk_combine(musb,type) \ ^ Signed-off-by: Saurav Girepunje <saurav.girepunje@google.com> Link: https://lore.kernel.org/r/20210418174720.GA59520@user Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: gadget: dummy_hcd: fix gpf in gadget_setupAnirudh Rayabharam
Fix a general protection fault reported by syzbot due to a race between gadget_setup() and gadget_unbind() in raw_gadget. The gadget core is supposed to guarantee that there won't be any more callbacks to the gadget driver once the driver's unbind routine is called. That guarantee is enforced in usb_gadget_remove_driver as follows: usb_gadget_disconnect(udc->gadget); if (udc->gadget->irq) synchronize_irq(udc->gadget->irq); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc); usb_gadget_disconnect turns off the pullup resistor, telling the host that the gadget is no longer connected and preventing the transmission of any more USB packets. Any packets that have already been received are sure to processed by the UDC driver's interrupt handler by the time synchronize_irq returns. But this doesn't work with dummy_hcd, because dummy_hcd doesn't use interrupts; it uses a timer instead. It does have code to emulate the effect of synchronize_irq, but that code doesn't get invoked at the right time -- it currently runs in usb_gadget_udc_stop, after the unbind callback instead of before. Indeed, there's no way for usb_gadget_remove_driver to invoke this code before the unbind callback. To fix this, move the synchronize_irq() emulation code to dummy_pullup so that it runs before unbind. Also, add a comment explaining why it is necessary to have it there. Reported-by: syzbot+eb4674092e6cc8d9e0bd@syzkaller.appspotmail.com Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210419033713.3021-1-mail@anirudhrb.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: dwc3: gadget: Fix START_TRANSFER link state checkThinh Nguyen
The START_TRANSFER command needs to be executed while in ON/U0 link state (with an exception during register initialization). Don't use dwc->link_state to check this since the driver only tracks the link state when the link state change interrupt is enabled. Check the link state from DSTS register instead. Note that often the host already brings the device out of low power before it sends/requests the next transfer. So, the user won't see any issue when the device starts transfer then. This issue is more noticeable in cases when the device delays starting transfer, which can happen during delayed control status after the host put the device in low power. Fixes: 799e9dc82968 ("usb: dwc3: gadget: conditionally disable Link State change events") Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/bcefaa9ecbc3e1936858c0baa14de6612960e909.1618884221.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: gadget: Fix double free of device descriptor pointersHemant Kumar
Upon driver unbind usb_free_all_descriptors() function frees all speed descriptor pointers without setting them to NULL. In case gadget speed changes (i.e from super speed plus to super speed) after driver unbind only upto super speed descriptor pointers get populated. Super speed plus desc still holds the stale (already freed) pointer. Fix this issue by setting all descriptor pointers to NULL after freeing them in usb_free_all_descriptors(). Fixes: f5c61225cf29 ("usb: gadget: Update function for SuperSpeedPlus") cc: stable@vger.kernel.org Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1619034452-17334-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: typec: tcpm: Fix error while calculating PPS out valuesBadhri Jagan Sridharan
"usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply" introduced a regression for req_out_volt and req_op_curr calculation. req_out_volt should consider the newly calculated max voltage instead of previously accepted max voltage by the port partner. Likewise, req_op_curr should consider the newly calculated max current instead of previously accepted max current by the port partner. Fixes: e3a072022487 ("usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210415050121.1928298-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-20Merge tag 'v5.12-rc8' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-04-14usb: xhci-mtk: remove unused membersChunfeng Yun
Now some members about phys and wakeup are not used anymore, remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: use clock bulk to get clocksChunfeng Yun
Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: add support runtime PMChunfeng Yun
A dedicated wakeup irq will be used to handle runtime suspend/resume, we use dev_pm_set_dedicated_wake_irq API to take care of requesting and attaching wakeup irq, then the suspend/resume framework will help to enable/disable wakeup irq. The runtime PM is default off since some platforms may not support it. users can enable it via power/control (set "auto") in sysfs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: check return value in suspend/resume hooksChunfeng Yun
Return error number if encounter errors during suspend and resume. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: typec: tcpm: Allow slow charging loops to comply to pSnkStbyBadhri Jagan Sridharan
When a PD charger advertising Rp-3.0 is connected to a sink port, the sink port current limit would 3A, during SNK_DISCOVERY, till power negotiation starts. Once the negotiation starts the power limit needs to drop down to pSnkStby(500mA @ 5V) and to negotiated current limit once the explicit contract is in place. Not all charging loops can ramp up to 3A and drop down to 500mA within tSnkStdby which is 15ms. The port partner might hard reset if tSnkStdby is not met. To solve this problem, this patch introduces slow-charger-loop which when set makes the port request PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY(instead of 3A or the 1.5A during SNK_DISCOVERY) and the actual currrent limit after RX of PD_CTRL_PSRDY for PD link or during SNK_READY for non-pd link. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210414024000.4175263-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: typec: tcpm: Honour pSnkStdby requirement during negotiationBadhri Jagan Sridharan
>From PD Spec: The Sink Shall transition to Sink Standby before a positive or negative voltage transition of VBUS. During Sink Standby the Sink Shall reduce its power draw to pSnkStdby. This allows the Source to manage the voltage transition as well as supply sufficient operating current to the Sink to maintain PD operation during the transition. The Sink Shall complete this transition to Sink Standby within tSnkStdby after evaluating the Accept Message from the Source. The transition when returning to Sink operation from Sink Standby Shall be completed within tSnkNewPower. The pSnkStdby requirement Shall only apply if the Sink power draw is higher than this level. The above requirement needs to be met to prevent hard resets from port partner. Without the patch: (5V/3A during SNK_DISCOVERY all the way through explicit contract) [ 95.711984] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 95.712007] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 95.712017] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 95.837190] VBUS on [ 95.882075] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 95.882082] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 95.882086] polarity 1 [ 95.883151] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 95.883441] enable vbus discharge ret:0 [ 95.883445] Requesting mux state 1, usb-role 2, orientation 2 [ 95.883776] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 95.883879] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 96.038960] VBUS on [ 96.383939] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 96.383946] Setting voltage/current limit 5000 mV 3000 mA [ 96.383961] vbus=0 charge:=1 [ 96.386044] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 96.386309] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 96.394404] PD RX, header: 0x2161 [1] [ 96.394408] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 96.394410] PDO 1: type 0, 9000 mV, 2000 mA [] [ 96.394412] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 96.394416] Setting usb_comm capable false [ 96.395083] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 96.395089] Requesting PDO 1: 9000 mV, 2000 mA [ 96.395093] PD TX, header: 0x1042 [ 96.397404] PD TX complete, status: 0 [ 96.397424] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 96.400826] PD RX, header: 0x363 [1] [ 96.400829] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 96.400832] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 96.577315] PD RX, header: 0x566 [1] [ 96.577321] Setting voltage/current limit 9000 mV 2000 mA [ 96.578363] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 96.578370] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] With the patch: [ 168.398573] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 168.398605] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 168.398619] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 168.522348] VBUS on [ 168.568676] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 168.568684] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 168.568688] polarity 1 [ 168.569867] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:5000 ret:0 [ 168.570158] enable vbus discharge ret:0 [ 168.570161] Requesting mux state 1, usb-role 2, orientation 2 [ 168.570504] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 168.570634] pending state change SNK_STARTUP -> SNK_DISCOVERY @ 500 ms [rev3 NONE_AMS] [ 169.070689] state change SNK_STARTUP -> SNK_DISCOVERY [delayed 500 ms] [ 169.070695] Setting voltage/current limit 5000 mV 3000 mA [ 169.070702] vbus=0 charge:=1 [ 169.072719] state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] [ 169.073145] pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 450 ms [rev3 NONE_AMS] [ 169.077162] PD RX, header: 0x2161 [1] [ 169.077172] PDO 0: type 0, 5000 mV, 3000 mA [E] [ 169.077178] PDO 1: type 0, 9000 mV, 2000 mA [] [ 169.077183] state change SNK_WAIT_CAPABILITIES -> SNK_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 169.077191] Setting usb_comm capable false [ 169.077753] cc=0 cc1=0 cc2=5 vbus=0 vconn=sink polarity=1 [ 169.077759] Requesting PDO 1: 9000 mV, 2000 mA [ 169.077762] PD TX, header: 0x1042 [ 169.079990] PD TX complete, status: 0 [ 169.080013] pending state change SNK_NEGOTIATE_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev2 POWER_NEGOTIATION] [ 169.083183] VBUS on [ 169.084195] PD RX, header: 0x363 [1] [ 169.084200] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_TRANSITION_SINK [rev2 POWER_NEGOTIATION] [ 169.084206] Setting standby current 5000 mV @ 500 mA [ 169.084209] Setting voltage/current limit 5000 mV 500 mA [ 169.084220] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 500 ms [rev2 POWER_NEGOTIATION] [ 169.260222] PD RX, header: 0x566 [1] [ 169.260227] Setting voltage/current limit 9000 mV 2000 mA [ 169.261315] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 ret:0 [ 169.261321] state change SNK_TRANSITION_SINK -> SNK_READY [rev2 POWER_NEGOTIATION] [ 169.261570] AMS POWER_NEGOTIATION finished Fixes: f0690a25a140b ("staging: typec: USB Type-C Port Manager (tcpm)") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210414024000.4175263-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: dwc3: gadget: Check for disabled LPM quirkThinh Nguyen
If the device doesn't support LPM, make sure to disable the LPM capability and don't advertise to the host that it supports it. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/9e68527ff932b1646f92a7593d4092a903754666.1618366071.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: dwc3: core: Add shutdown callback for dwc3Sandeep Maheswaram
This patch adds a shutdown callback to USB DWC core driver to ensure that it is properly shutdown in reboot/shutdown path. This is required where SMMU address translation is enabled like on SC7180 SoC and few others. If the hardware is still accessing memory after SMMU translation is disabled as part of SMMU shutdown callback in system reboot or shutdown path, then IOVAs(I/O virtual address) which it was using will go on the bus as the physical addresses which might result in unknown crashes (NoC/interconnect errors). Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Link: https://lore.kernel.org/r/1618380209-20114-1-git-send-email-sanm@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: dwc3: gadget: Ignore Packet Pending bitThinh Nguyen
Currently the controller handles single stream only. So, Ignore Packet Pending bit for stream selection and don't search for another stream if the host sends Data Packet with PP=0 (for OUT direction) or ACK with NumP=0 and PP=0 (for IN direction). This slightly improves the stream performance. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/097ba9e104c143f7ba0195ebff29390ec3043692.1618282705.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 EthernetKai-Heng Feng
This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: typec: silence a static checker warningDan Carpenter
Smatch complains about a potential missing error code: drivers/usb/typec/port-mapper.c:168 typec_link_port() warn: missing error code 'ret' This is a false positive and returning zero is intentional. Let's re-arrange the code to silence the warning and make the intent more clear. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YHadaACH8Mq/10F7@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-13USB: cdc-acm: add more Maxlinear/Exar models to ignore listMauro Carvalho Chehab
Now that the xr_serial got support for other models, add their USB IDs as well. The Maxlinear/Exar USB UARTs can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up correctly. Ensure that cdc_acm will not bind to these devices if the custom USB-serial driver is enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5155887a764cbc11f8da0217fe08a24a77d120b4.1616571453.git.mchehab+huawei@kernel.org [ johan: rewrite commit message, clean up entries ] Cc: Oliver Neukum <oneukum@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 10:32:10 +0000