summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2012-03-15USB: OHCI: Add a generic platform device driverHauke Mehrtens
This adds a generic driver for platform devices. It works like the PCI driver and is based on it. This is for devices which do not have an own bus but their OHCI controller works like a PCI controller. It will be used for the Broadcom bcma and ssb USB OHCI controller. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15USB: ftdi_sio: new PID: LUMEL PD12Michał Wróbel
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16USB: at91: Device udc add dt supportJean-Christophe PLAGNIOL-VILLARD
Allow to compile it if AT91 is enable. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5Jean-Christophe PLAGNIOL-VILLARD
make the ECHI depends on ARCH_AT91 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: usb ehci add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16ARM: at91: usb ohci add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Merge branch 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6 ↵Arnd Bergmann
into next/cleanup * 'ep93xx-for-arm-soc' of git://github.com/RyanMallon/linux-2.6: ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file (update to v3.3-rc7) Conflicts: arch/arm/mach-s3c2440/common.h
2012-03-14USB: ftdi_sio: add support for FT-X series devicesJim Paris
Add PID 0x6015, corresponding to the new series of FT-X chips (FT220XD, FT201X, FT220X, FT221X, FT230X, FT231X, FT240X). They all appear as serial devices, and seem indistinguishable except for the default product string stored in their EEPROM. The baudrate generation matches FT232RL devices. Tested with a FT201X and FT230X at various baudrates (100 - 3000000). Sample dmesg: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver usb 2-1: new full-speed USB device number 6 using ohci_hcd usb 2-1: New USB device found, idVendor=0403, idProduct=6015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: FT230X USB Half UART usb 2-1: Manufacturer: FTDI usb 2-1: SerialNumber: DC001WI6 ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: ftdi_sio_port_probe drivers/usb/serial/ftdi_sio.c: ftdi_determine_type: bcdDevice = 0x1000, bNumInterfaces = 1 usb 2-1: Detected FT-X usb 2-1: Number of endpoints 2 usb 2-1: Endpoint 1 MaxPacketSize 64 usb 2-1: Endpoint 2 MaxPacketSize 64 usb 2-1: Setting MaxPacketSize 64 drivers/usb/serial/ftdi_sio.c: read_latency_timer drivers/usb/serial/ftdi_sio.c: write_latency_timer: setting latency timer = 1 drivers/usb/serial/ftdi_sio.c: create_sysfs_attrs drivers/usb/serial/ftdi_sio.c: sysfs attributes for FT-X usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 Signed-off-by: Jim Paris <jim@jtan.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-14USB: serial: mos7840: Fixed MCS7820 device attach problemDonald Lee
A MCS7820 device supports two serial ports and a MCS7840 device supports four serial ports. Both devices use the same driver, but the attach function in driver was unable to correctly handle the port numbers for MCS7820 device. This problem has been fixed in this patch and this fix has been verified on x86 Linux kernel 3.2.9 with both MCS7820 and MCS7840 devices. Signed-off-by: Donald Lee <donald@asix.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.David Daney
The fact that an architecture/board has XHCI, OHCI or EHCI does not depend on the fact that the kernel is configured with USB_SUPPORT. Make the Kconfig reflect this fact thus avoiding ugly messages like: warning: (MIPS_ALCHEMY && CAVIUM_OCTEON_REFERENCE_BOARD && SOC_AR71XX && SOC_AR724X && SOC_AR913X && SOC_AR933X) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: David Daney <david.daney@cavium.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13usb gadget: fix a section mismatch when compiling g_ffs with ↵Lothar Waßmann
CONFIG_USB_FUNCTIONFS_ETH commit 28824b18ac4705e876a282a15ea0de8fc957551f: |Author: Michal Nazarewicz <m.nazarewicz@samsung.com> |Date: Wed May 5 12:53:13 2010 +0200 | | USB: gadget: __init and __exit tags removed | | __init, __initdata and __exit tags have have been removed from | various files to make it possible for gadgets that do not use | the __init/__exit tags to use those. obviously missed (at least) this case leading to a section mismatch in g_ffs.c when compiling with CONFIG_USB_FUNCTIONFS_ETH enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13USB: ohci-nxp: Remove i2c_write(), use smbusRoland Stigge
This patch removes the re-coded i2c_write function from the ohci-nxp driver in favour of using just smbus functions. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13USB: ohci-nxp: Support for LPC32xxRoland Stigge
This patch adds support for the LPC32xx to ohci-nxp Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13USB: ohci-nxp: Rename symbols from pnx4008 to nxpRoland Stigge
Since this driver is compatible with several NXP devices, the driver was renamed accordingly. This patch also changes the respective symbol names. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxpRoland Stigge
Since this driver is compatible with several NXP devices, the driver is renamed accordingly. Please combine with the following patch which also changes the respective symbol names. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13usb: gadget: Kconfig: fix typo for 'different'Fabio Baltieri
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13usb: dwc3: pci: fix another failure path in dwc3_pci_probe()Felipe Balbi
When applying commit 7d26b58 (fix failure path in dwc3_pci_probe()), I mistakenly left out one of the possible failures where we would return success even on the error case. This patch fixes that mistake. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13USB: dynamically allocate usb_device children pointers instead of using a ↵Huajun Li
fix array Non-hub device has no child, and even a real USB hub has ports far less than USB_MAXCHILDREN, so there is no need using a fix array for child devices, just allocate it dynamically according real port number. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13usb: host: xhci: add platform driver supportSebastian Andrzej Siewior
This adds a fairly simple xhci-platform driver support. Currently it is used by the dwc3 driver for supporting host mode. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-13xHCI: update sg tablesizeAndiry Xu
Update sg tablesize as we can expand the ring now. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: check enqueue pointer advance into dequeue segAndiry Xu
When a urb is submitted to xHCI driver, check if queueing the urb will make the enqueue pointer advance into dequeue seg and expand the ring if it occurs. This is to guarantee the safety of ring expansion. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: Allocate 2 segments for transfer ringAndiry Xu
Allocate 2 segments for transfer ring by default, so we can expand the ring when the enqueue pointer and dequeue pointer are in different segments. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: dynamic ring expansionAndiry Xu
If room_on_ring() check fails, try to expand the ring and check again. When expand a ring, use a cached ring or allocate new segments, link the original ring and the new ring or segments, update the original ring's segment numbers and the last segment pointer. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: set cycle state when allocate ringsAndiry Xu
In the past all the rings were allocated with cycle state equal to 1. Now the driver may expand an existing ring, and the new segments shall be allocated with the same cycle state as the old one. This affects ring allocation and cached ring re-initialization. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: factor out segments allocation and free functionAndiry Xu
Factor out the segments allocation and free part from ring allocation and free routines since driver may call them directly when try to expand a ring. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: count free TRBs on transfer ringAndiry Xu
In the past, the room_on_ring() check was implemented by walking all over the ring, which is wasteful and complicated. Count the number of free TRBs instead. The free TRBs number should be updated when enqueue/dequeue pointer is updated, or upon the completion of a set dequeue pointer command. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: store ring's last segment and segment numbersAndiry Xu
Store the ring's last segment pointer and number of segments for ring expansion usage. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-12xHCI: store ring's typeAndiry Xu
When allocate a ring, store its type - four transfer types for endpoint, TYPE_STREAM for stream transfer, and TYPE_COMMAND/TYPE_EVENT for xHCI host. This helps to get rid of three bool function parameters: link_trbs, isoc and consumer. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-12usb: host: xhci: use __ffs() instead of hardcoding shiftFelipe Balbi
__ffs() can tell us which is the SEGMENT_SHIFT value to be used. This will prevent problems when users are too fast and don't pay attention to the need of fixing the Shift after changing TRBS_PER_SEGMENT. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12xHCI: BESL calculation based on USB2.0 LPM errataAndiry Xu
The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0 extension descriptor, defines two BESL values for device: baseline BESL and deep BESL. Baseline BESL value communicates a nominal power savings design point and the deep BESL value communicates a significant power savings design point. If device indicates BESL value, driver will use a value count in both host BESL and device BESL. Use baseline BESL value as default. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Tested-by: Jason Fan <jcfan@qca.qualcomm.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12Merge 3.3-rc7 into usb-nextGreg Kroah-Hartman
This resolves the conflict with drivers/usb/host/ehci-fsl.h that happened with changes in Linus's and this branch at the same time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09USB: ftdi_sio: new PID: Distortec JTAG-lock-pickMichał Wróbel
Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman
This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: move to use dev_dbg() instead of dbg()Greg Kroah-Hartman
This properly ties the driver into the dynamic debug system and provides the needed device identification when the messages are printed out. It also removes a ton of checkpatch warnings as well, which is always a nice validation that it's the correct thing to do. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove unneeded cast and function callGreg Kroah-Hartman
We should use kzalloc() instead of kmalloc() and memset(), and remove an unneeded void * cast as well. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove function header commentsGreg Kroah-Hartman
They aren't needed, make the checkpatch tool unhappy, and in some places, aren't even correct. So just remove them, they get in the way and are messy. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove function prototypesGreg Kroah-Hartman
By rearranging the functions a bit, we can remove all function prototypes. Note, this also deleted the _close function, as it wasn't needed, it was doing the same thing the cleanup function did, so just call that instead. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: fix up coding style errorsGreg Kroah-Hartman
This fixes up all of the coding style errors, and removes the initial, unneeded comments on how to load the module and the old changelog which are no longer needed. There are still a number of coding style warnings left, I'll get to them later. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove the .h fileGreg Kroah-Hartman
A driver doesn't need a .h file just for simple things like vendor ids and a private structure. So move it into the .c file instead, saving some overall lines. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: convert to use module_usb_serial_driverGreg Kroah-Hartman
Now that we aren't doing anything special in the init function, move to use the easier module_usb_serial_driver() call instead, saving a lot of lines of unnecessary code. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: remove vendor and product module parametersGreg Kroah-Hartman
All new usb serial drivers should be using the dynamic id function, not having module parameters for this type of thing. So remove them before anyone gets used to them being there. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: add to the buildGreg Kroah-Hartman
This adds the metro-usb driver to the build system properly. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: metro-usb: fix up usb_serial_register callsGreg Kroah-Hartman
The usb serial core has changed how the driver is to be registered and unregistered recently. Make these changes to the driver so that it will properly build and work. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: serial: add metro-usb driver to the treeAleksey Babahin
This driver is for the Metrologic barcode scanner. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: gadget: Make g_hid device class conform to spec.Orjan Friberg
HID devices should specify this in their interface descriptors, not in the device descriptor. This fixes a "missing hardware id" bug under Windows 7 with a VIA VL800 (3.0) controller. Signed-off-by: Orjan Friberg <of@flatfrog.com> Cc: Felipe Balbi <balbi@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08usb: cdc-wdm: adding usb_cdc_wdm_register subdriver supportBjørn Mork
This driver can be used as a subdriver of another USB driver, allowing it to export a Device Managment interface consisting of a single interrupt endpoint with no dedicated USB interface. Some devices provide a Device Management function combined with a wwan function in a single USB interface having three endpoints (bulk in/out + interrupt). If the interrupt endpoint is used exclusively for DM notifications, then this driver can support that as a subdriver provided that the wwan driver calls the appropriate entry points on probe, suspend, resume, pre_reset, post_reset and disconnect. The main driver must have full control over all interface related settings, including the needs_remote_wakeup flag. A manage_power function must be provided by the main driver. A manage_power stub doing direct flag manipulation is used in normal driver mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08usb: cdc-wdm: adding list lookup indirectionBjørn Mork
Register all interfaces handled by this driver in a list, getting rid of the dependency on usb_set_intfdata. This allows further generalization and simplification of the probe/create functions. This is needed to decouple wdm_open from the driver owning the interface, and it also allows us to share all the code in wdm_create with drivers unable to do usb_set_intfdata. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08usb: cdc-wdm: split out reusable parts of probeBjørn Mork
Preparing for the addition of subdriver registering as an alternative to probe for interface-less usage. This should not change anything apart from minor code reordering. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: Microchip VID mislabeled as Hornby VID in ftdi_sio.Bruno Thomsen
Microchip VID (0x04d8) was mislabeled as Hornby VID according to USB-IDs. A Full Speed USB Demo Board PID (0x000a) was mislabeled as Hornby Elite (an Digital Command Controller Console for model railways). Most likely the Hornby based their design on PIC18F87J50 Full Speed USB Demo Board. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08USB: ehci-s5p: add DMA burst supportJingoo Han
DMA burst support is added to improve performance in EHCI data transfer. The USB EHCI controller on Exynos SoCs can use INCR16, INCR8, and INCR4 mode. These modes of INSNREG00 register should be set in order to enable DMA burst transfer. This feature is also related to AHB spec. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 12:16:54 +0000