summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2012-05-11usb: chipidea: add host roleAlexander Shishkin
This adds EHCI host support to the chipidea driver. We want it to be part of the hdrc driver and not a standalone (sub-)driver module, as the structure of ehci-hcd.c suggests, so for chipidea controller we hack it to not provide platform-related code, but only the ehci hcd. The ehci-platform driver won't work for us here too, because the controller uses the same registers for both device and host mode and also otg-related bits, so it's not really possible to put ehci registers into a separate resource. This is not a pretty solution, but the alternative is exporting symbols from the chipidea driver to a ehci-chipidea driver and doing all the module refcounting. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: use common definition for USBMODE bitsAlexander Shishkin
Some of the bits of USBMODE register are defined in <usb/ehci_def.h>, use them instead of having our own definitions. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: drop unused msm register definitionsAlexander Shishkin
These definitions are unused, and the same registers are also defined in <linux/usb/msm_hsusb_hw.h>. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: drop redundant NULL checkAlexander Shishkin
Currently, gadget can't be NULL in _gadget_stop_activity(). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: isr_reset_handler fix missing lockingMichael Grzeschik
Move spin_lock under the done label, so the lock will also be pulled in the error paths. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [rebased on top of the patchset] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: brush up structure definitionsAlexander Shishkin
Get rid of trailing comments in the structure definitions in favor of kernel-doc. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: remove unused field "regs" from ci13xxxAlexander Shishkin
The old implementation used global hw_bank, the new implementation uses udc-local hw_bank. This field seems to be a leftover from previous coding experiments. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: add support for rolesAlexander Shishkin
Add some generic code for roles and implement simple role switching based on ID pin state and/or a sysfs file. At this, we also rename the device to ci_hdrc, which is what it is. The "manual" switch is made into a sysfs file and not debugfs, because it might be useful even in non-debug context. For some boards, like sheevaplug, it seems to be the only way to switch roles without modifying the hardware, since the ID pin is always grounded. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: chipidea: split the driver code into unitsAlexander Shishkin
Split the driver into the following parts: * core -- resources, register access, capabilities, etc; * udc -- device controller functionality; * debug -- logging events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: move ci13xxx and related code to drivers/usb/chipideaAlexander Shishkin
Since chipidea is a dual role controller, it makes sense to move it to its own directory, where we can also have host, otg and platform code related to this controller. It also makes sense to break out the driver into several compilation units like udc, host, debugging code, etc. Firstly, let's move the udc and platform code to drivers/usb/chipidea. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: ci13xxx: print basic device info when probingAlexander Shishkin
Report basic information about capabilities and register addresses on probe. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: ci13xxx: don't use "advance" feature when setting addressAlexander Shishkin
Newer versions of the chipidea controller support the "advance" setting of usb address, which means instead of setting it immediately, deferring it till the status completion. Unfortunately, older versions of the controller don't have this feature, so in order to support those too, we simply don't use it. It's about 4 lines of extra code, and isn't in any way critical to performance. While at it, change the return value of the hw_usb_set_address() to void, since it can't fail in any measurable way. With this patch, ci13xxx_udc driver works with the chipidea controller in kirkwood (feroceon SoC), as found in, for example, sheevaplug. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: ci13xxx: fix the context of register mapAlexander Shishkin
The regmap field is an array of register pointers, not the other way around. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: ci13xxx: get rid of local tracing for goodAlexander Shishkin
There is no point in having tracing output in the kernel these days. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: ci13xxx_pci: guard against devices without driver_dataAlexander Shishkin
Don't try to initialize devices that don't have driver_data assigned to their pci ids. Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11USB: cdc-wdm: remove from device list on disconnectBjørn Mork
Prevents dereferencing an invalid struct usb_interface pointer. Always delete entry from device list whether or not the rest of the device state cleanup is postponed. The device list uses desc->intf as key, and wdm_open will dereference this key while searching for a matching device. A device should not appear in the list unless probe() has succeeded and disconnect() has not finished. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11USB: cdc-wdm: cannot use dev_printk when device is goneBjørn Mork
We cannot dereference a removed USB interface for dev_printk. Use pr_debug instead where necessary. Flush errors are expected if device is unplugged and are therefore best ingored at this point. Move the kill_urbs() call in wdm_release with dev_dbg() for the non disconnect, as we know it has already been called if WDM_DISCONNECTING is set. This does not actually fix anything, but keeps the code more consistent. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11USB: cdc-wdm: poll must return POLLHUP if device is goneBjørn Mork
Else the poll will be restarted indefinitely in a tight loop, preventing final device cleanup. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: dwc3: Fix the dwc3 dependencyjoseph daniel
The warning shown up when ran with randconfig, warning: (USB_DWC3) selects USB_XHCI_PLATFORM which has unmet direct dependencies (USB_SUPPORT && USB_XHCI_HCD) Signed-off-by: joseph daniel <josephdanielwalter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: gadget: dummy_hcd: fix build when BUG is not setSasha Levin
Use WARN_ON() instead of __WARN, which also means we won't use any internal macros. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11usb: host: mips: sead3: Fix for big endian.Steven J. Hill
Fix driver to work properly in big endian mode. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11USB: serial: ti_usb_3410_5052: Add support for the FRI2 serial consoleDarren Hart
The Kontron M2M development board, also known as the Fish River Island II, has an optional daughter card providing access to the PCH_UART (EG20T) via a ti_usb_3410_5052 uart to usb chip. http://us.kontron.com/products/systems+and+platforms/m2m/m2m+smart+services+developer+kit.html Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Al Borchers <alborchers@steinerpoint.com> CC: Peter Berger <pberger@brimson.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/clock Shawn Guo <shawn.guo@linaro.org> writes: mxs common clk porting for v3.5. It depends on the following two branches. [1] git://git.linaro.org/people/mturquette/linux.git clk-next [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev As the mxs device tree conversion will constantly touch clock files, to save the conflicts, the updated mxs/dt branch coming later will based on this pull-request. * 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: remove now unused timer_clk argument from mxs_timer_init ARM: mxs: remove old clock support ARM: mxs: switch to common clk framework ARM: mxs: change the lookup name for fec phy clock ARM: mxs: request clock for timer clk: mxs: add clock support for imx28 clk: mxs: add clock support for imx23 clk: mxs: add mxs specific clocks Includes an update to Linux 3.4-rc6 Conflicts: drivers/clk/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-10USB: serial: opticon: hook up suspend/resume callbacksGreg Kroah-Hartman
With a previous patch, the usb_driver suspend/resume callbacks got overridden and were never called if a usb_serial driver defined them. This patch fixes the opticon driver to move the suspend/resume callbacks into the usb_serial_driver structure where they will be properly called. It then removes the unused usb_driver structure. Cc: Johan Hovold <jhovold@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Julia Lawall <julia@diku.dk> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10USB: serial: add copyright and license to quatech2Bill Pemberton
Add a copyright and license statement to the head of quatech.c source file. No code change here. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10USB: serial: add quatech2 usb to serial driverBill Pemberton
This supports the Quatech USB 2 usb to serial adapters. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: f_rndis: Set rndis vendor parametersBenoit Goby
Add a variant of rndis_bind_config to let gadget drivers change rndis vendorID and manufacturer parameters. Signed-off-by: Benoit Goby <benoit@android.com> [make rndis_bind_config a static inline function] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: rndis: Fix re-binding f_rndisBenoit Goby
f_rndis checks if rndis_string_defs[0].id is null to setup rndis and allocate string ids when it is bound to the first configuration: /* maybe allocate device-global string IDs */ if (rndis_string_defs[0].id == 0) { /* ... and setup RNDIS itself */ status = rndis_init(); if (status < 0) return status; rndis_string_defs[0].id must be reset to 0 on unbind for rndis to be correctly initialized on the next composite_bind. Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: Add variant of gether_setup to customize the device nameMike Lockwood
This is needed to avoid name collisions on SoCs that have both usb gadget and usb host, where usb0 may be the rndis interface or a usb ethernet adapter. Signed-off-by: Mike Lockwood <lockwood@android.com> Signed-off-by: Benoit Goby <benoit@android.com> [make gether_setup a static inline function] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: u_serial: Allow calling gserial_setup after initBenoit Goby
Remove geserial_setup from the init section. The android gadget driver calls it after probe, after userspace has configured the gadget driver. Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: composite: add iSerialNumber to usb_composite_driverAndrzej Pietrasiewicz
Add iSerialNumber to usb_composite_driver to allow setting a default value. This is useful when the module is compiled-in. Then the composite_bind is executed at kernel boot and string id for iSerialNumber can be overridden even if there is no iSerialNumber kernel commandline parameter. If the string id is not overridden, then get_string will never attempt to look for the alternative string contents using cdev->serial_override. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: composite: make module parameters accessible at runtimeAndrzej Pietrasiewicz
Enable module parameters to be modified at runtime, especially if the module is compiled-in. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: composite: Initialize config->interfaceBenoit Goby
Reset config->interface in usb_add_config, as it may contain pointers to functions from a previous session if config is removed and re-added. Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10usb: gadget: composite: Add usb_remove_configBenoit Goby
Add usb_remove_config to unbind a configuration and remove it from the configs list. This allows implementing composite gadget drivers that can disconnect themself from the bus and that will later be re-enumerated with a different configuration. Gadget drivers must call usb_gadget_disconnect before calling this function to disable the pullup, disconnect the device from the host, and prevent the host from enumerating the device while we are changing the gadget configuration. Signed-off-by: Benoit Goby <benoit@android.com> [change return type of [usb_]remove_config] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10USB: gadget: ci13xx_pci: remove unneeded check in ci13xxx_pci_probe()Greg Kroah-Hartman
As pointed out by Dan Carpenter, the check for NULL for the id variable is no longer needed, especially as we just dereferenced it a few lines earlier, causing an oops if it really was NULL. This was caused by 62bb84ed0e4d: "usb: gadget: ci13xxx: convert to platform device". Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10USB: gadget: ci13xx_udc: fix potential crash in irq handlerGreg Kroah-Hartman
As pointed out by Dan Carpenter, we should not be trying to call dev_err() on a structure that was previously determined to be NULL, that's just foolish and asking for trouble. So just delete the message, it's not going to do anyone any good to have it anyway. This problem was caused by 0f089094cde5: "usb: gadget: ci13xxx: replace home-brewed logging with dev_{err,warn,info}" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into ↵Olof Johansson
next/drivers DaVinci SoC updates for v3.5 This pull request updates the DaVinci SoC support to implement DEBUG_LL port choice and optimizes the DMA ISR by removing unnecessary register reads. * tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice + sync with Linux 3.4-rc6 Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09Merge branch 'for-3.5/usb-ulpi' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers By Stephen Warren (30) and others via Stephen Warren * 'for-3.5/usb-ulpi' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (7 commits) ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table + depends/pinctrl/mergebase branch Pinctrl mergebase has a conflict in drivers/pinctrl/core.c that was resolved. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09Merge branch 'for-3.5/gpio-pinmux' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/pinctrl By Stephen Warren via Stephen Warren * 'for-3.5/gpio-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: pinctrl: tegra: error reporting cleanup pinctrl: tegra: debugfs enhancements pinctrl: tegra: refactor probe handling ARM: dt: tegra20: add pinmux to device tree ARM: dt: tegra cardhu: add pinmux to device tree ARM: tegra: Remove pre-pinctrl pinmux driver ARM: tegra: Switch to new pinctrl driver gpio: tegra: Hide tegra_gpio_enable/disable() ARM: tegra: seaboard: Don't gpio_request() ISL29018_IRQ gpio: tegra: configure pins during irq_set_type ARM: tegra: Remove VBUS_GPIO handling from board files usb: ehci-tegra: Add vbus_gpio to platform data
2012-05-09usb-gadget: Initial merge of target module for UASP + BOTSebastian Andrzej Siewior
This fabric uses the target framework to provide a usb gadget device. This gadget supports the USB Attached SCSI Protocol (UASP) and Bulk Only Transfers (BOT or BBB). BOT is the primary interface, UAS is the alternative interface. It has been tested with dummy_hcd on HS and SS. On SS USB3 are supported. I also took my omap device and tried it there against WindowsXP. UAS implements basic command passing (i.e. read/write requests) and TASK MANAGEMENT functions are missing. I had to add a little of error recovery to BOT because Windows was issuing some strange commands and it does not complain after the gadget responded with CSW.status=1. (nab: Move to drivers/usb/gadget as per Sebastian to address legacy limitations for built-in gadget code) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09usb:hsotg:samsung:cosmetic Move <linux/platform_data/s3c-hsotg.h> to proper ↵Lukasz Majewski
place This commit adds a cosmetic change to the s3c-hsotg UDC driver. It moves s3c-hsotg.h to other linux/ related inclusions. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09USB: ohci-at91: add a reset function to fix race conditionNicolas Ferre
A possible race condition appears because we are not initializing the ohci->regs before calling usb_hcd_request_irqs(). We move the call to ohci_init() in hcd->driver->reset() instead of hcd->driver->start() to fix this. This was experienced when we share the same IRQ line between OHCI and EHCI controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Christian Eggers <christian.eggers@kathrein.de> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09USB: ohci-at91: use resource_size() for memory/io resource lengthNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09ARM: OMAP: USB: fix warning on EHCI PHY reset pathIgor Grinberg
When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: convert to new styleAlexander Shishkin
Finally, convert to the new style framework, using udc_start/udc_stop methods. Since there is no need in the global _udc pointer, remove it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: move endpoint (de-)initialization to probe/removeAlexander Shishkin
Currently, endpoints are initialized in gadget start/stop methods, however for the new style gadgets it is expected that bind() can be called before controller's start(), and we need endpoints already initialized at that point. So, move endpoint initialization to controller's probe before we switch to the "new style" gadget framework. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: replace home-brewed logging with dev_{err,warn,info}Alexander Shishkin
Logging output in the driver is mostly done using custom err/warn/info macros which rely on the existence of the global variable _udc, which is a global reference to the udc controller structure. This reference will have to go in order to allow us to have more than one chipidea udc in the system. Thus, replace custom macros with dev_{err,warn,info} using the platform device where possible. The trace() macro, which is a nop by default is left for tracing purposes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: convert to platform deviceAlexander Shishkin
Let's break ci13xxx driver into a separate udc driver and platform drivers _pci and _msm, which will create a platform device for each pci (or msm) device found. The approach was introduced by Felipe in dwc3 driver and there seems to be no reason not to use it. msm related code is only compile-tested. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: conversion of controllers choice to menuAlexander Shishkin
After the UDC class conversion, there is no reason to limit the kernel to have only one UDC controller in the system. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09usb: gadget: ci13xxx: redo register accessAlexander Shishkin
Use lookup table instead of conditional macrodefinitions of register addresses. With two different possible register layouts and different register offsets, it's easiest to build a table with register addresses at probe time, based on the information supplied from the platform and device capabilities. This way we get rid of branch-per-register-access. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-27 20:29:50 +0000