summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2016-05-02Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"Johan Hovold
This reverts commit e3345db85068ddb937fc0ba40dfc39c293dad977, which broke system resume for a large class of devices. Devices that after having been reset during resume need to be rebound due to a missing reset_resume callback, are now left in a suspended state. This specifically broke resume of common USB-serial devices, which are now unusable after system suspend (until disconnected and reconnected) when USB persist is enabled. During resume, usb_resume_interface will set the needs_binding flag for such interfaces, but unlike system resume, run-time resume does not honour it. Cc: stable <stable@vger.kernel.org> # 4.5 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-29Merge tag 'usb-serial-4.6-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc6 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-26usb: musb: jz4740: fix error check of usb_get_phy()Vladimir Zapolskiy
The usb_get_phy() function returns either a valid pointer to phy or ERR_PTR() error, check for NULL always fails and may lead to oops on error path, fix this issue. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in ↵Bin Liu
bottom half" This reverts commit 2035772010db634ec8566b658fb1cd87ec47ac77. Commit 20357720 claims throughput improvement for MSC/UVC, but I don't see much improvement. Following are the MSC measurement using dd on AM335x GP EVM. with BCD_BH: read: 14.9MB/s, write: 20.9MB/s without BCD_BH: read: 15.2MB/s, write: 21.2MB/s However with this commit the following regressions have been observed. 1. ASIX usb-ethernet dongle is completely broken on UDP RX. 2. Unpluging a 3G modem, which uses option driver, behind a hub causes console log flooding with the following message. option_instat_callback: error -71 Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usb: musb: gadget: nuke endpoint before setting its descriptor to NULLTal Shorer
Some functions, such as f_sourcesink, rely on an endpoint's desc field during their requests' complete() callback, so clear it only _after_ nuking all requests to avoid NULL pointer dereference. Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-24USB: serial: cp210x: add Straizona Focusers device idsJasem Mutlaq
Adding VID:PID for Straizona Focusers to cp210x driver. Signed-off-by: Jasem Mutlaq <mutlaqja@ikarustech.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-24USB: serial: cp210x: add ID for Link ECUMike Manning
The Link ECU is an aftermarket ECU computer for vehicles that provides full tuning abilities as well as datalogging and displaying capabilities via the USB to Serial adapter built into the device. Signed-off-by: Mike Manning <michael@bsch.com.au> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-20usb: gadget: f_fs: Fix use-after-freeLars-Peter Clausen
When using asynchronous read or write operations on the USB endpoints the issuer of the IO request is notified by calling the ki_complete() callback of the submitted kiocb when the URB has been completed. Calling this ki_complete() callback will free kiocb. Make sure that the structure is no longer accessed beyond that point, otherwise undefined behaviour might occur. Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: gadget: Fix suspend/resume during device modeRoger Quadros
Gadget controller might not be always active during system suspend/resume as gadget driver might not have yet been loaded or might have been unloaded prior to system suspend. Check if we're active and only then perform necessary actions during suspend/resume. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: fix memory leak of dwc->regsetDu, Changbin
dwc->regset is allocated on dwc3_debugfs_init, and should be released on init failure or dwc3_debugfs_exit. Btw, The line "dwc->root = NULL" is unnecessary, so remove it. Signed-off-by: Du, Changbin <changbin.du@intel.com> [ felipe.balbi@linux.intel.com : add another err label for the new error condition ] Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: core: fix PHY handling during suspendFelipe Balbi
we need to power off the PHY during suspend and power it back on during resume. Signed-off-by: Felipe Balbi <balbi@kernel.org> [nsekhar@ti.com: fix call to usb_phy_set_suspend() in dwc3_suspend()] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: omap: fix up error path on probe()Felipe Balbi
Even if pm_runtime_get*() fails, we *MUST* call pm_runtime_put_sync() before disabling PM. While at it, remove superfluous dwc3_omap_disable_irqs() in error path. Signed-off-by: Felipe Balbi <balbi@kernel.org> [nsekhar@ti.com: patch description updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: gadget: composite: Clear reserved fields of SSP Dev CapJohn Youn
Set the reserved fields of the SuperSpeed Plus Device Capability descriptor to 0. Otherwise there might be stale data there which will cause USB CV to fail. Fixes: f228a8de242a ("usb: gadget: composite: Return SSP Dev Cap descriptor") Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-13usb: hcd: out of bounds access in for_each_companionRobert Dobrowolski
On BXT platform Host Controller and Device Controller figure as same PCI device but with different device function. HCD should not pass data to Device Controller but only to Host Controllers. Checking if companion device is Host Controller, otherwise skip. Cc: <stable@vger.kernel.org> Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13USB: uas: Add a new NO_REPORT_LUNS quirkHans de Goede
Add a new NO_REPORT_LUNS quirk and set it for Seagate drives with an usb-id of: 0bc2:331a, as these will fail to respond to a REPORT_LUNS command. Cc: stable@vger.kernel.org Reported-and-tested-by: David Webb <djw@noc.ac.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13USB: uas: Limit qdepth at the scsi-host levelHans de Goede
Commit 64d513ac31bd ("scsi: use host wide tags by default") causes the SCSI core to queue more commands then we can handle on devices with multiple LUNs, limit the queue depth at the scsi-host level instead of per slave to fix this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1315013 Cc: stable@vger.kernel.org # 4.4.x and 4.5.x Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero valuePeter Griffin
Otherwise generic-xhci and xhci-platform which have no data get wrongly detected as XHCI_PLAT_TYPE_MARVELL_ARMADA by xhci_plat_type_is(). This fixes a regression in v4.5 for STiH407 family SoC's which use the synopsis dwc3 IP, whereby the disable_clk error path gets taken due to wrongly being detected as XHCI_PLAT_TYPE_MARVELL_ARMADA and the hcd never gets added. I suspect this will also fix other dwc3 DT platforms such as Exynos, although I've only tested on STih410 SoC. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: stable@vger.kernel.org Cc: gregory.clement@free-electrons.com Cc: yoshihiro.shimoda.uh@renesas.com Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllersMathias Nyman
PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will remove the xhci controller from the PCI bus when the last USB device is disconnected. Add a flag to indicate that the host is being removed to avoid queueing configure_endpoint commands for the dropped endpoints. For PCI hotplugged controllers this will prevent 5 second command timeouts For static xhci controllers the configure_endpoint command is not needed in the removal case as everything will be returned, freed, and the controller is reset. For now the flag is only set for PCI connected host controllers. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: xhci: fix wild pointers in xhci_mem_cleanupLu Baolu
This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB physYoshihiro Shimoda
This patch fixes an issue that cannot work if R-Car Gen2/3 run on above 4GB physical memory environment to use a quirk XHCI_NO_64BIT_SUPPORT. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORTYoshihiro Shimoda
On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit address memory pointers actually. So, in this case, this driver should call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in xhci_gen_setup(). Otherwise, the xHCI controller will be died after a usb device is connected if it runs on above 4GB physical memory environment. So, this patch adds a new quirk XHCI_NO_64BIT_SUPPORT to resolve such an issue. Cc: <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13xhci: resume USB 3 roothub firstMathias Nyman
Give USB3 devices a better chance to enumerate at USB 3 speeds if they are connected to a suspended host. Solves an issue with NEC uPD720200 host hanging when partially enumerating a USB3 device as USB2 after host controller runtime resume. Cc: <stable@vger.kernel.org> Tested-by: Mike Murdoch <main.haarp@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 hostRafal Redzimski
Broxton B0 also requires XHCI_PME_STUCK_QUIRK. Adding PCI device ID for Broxton B and adding to quirk. Cc: <stable@vger.kernel.org> Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-13cdc-acm: fix crash if flushed with nothing bufferedOliver Neukum
Under some circumstances acm_tty_flush_chars() is called with no buffer to flush. We simply need to do nothing. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-09Merge tag 'usb-4.6-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.6-rc3. Nothing major, the normal USB gadget fixes and usb-serial driver ids, along with some other fixes mixed in. All except the USB serial ids have been tested in linux-next, the id additions should be fine as they are 'trivial'" * tag 'usb-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: option: add "D-Link DWM-221 B1" device id USB: serial: cp210x: Adding GE Healthcare Device ID USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices usb: dwc3: keystone: drop dma_mask configuration usb: gadget: udc-core: remove manual dma configuration usb: dwc3: pci: add ID for one more Intel Broxton platform usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done() usb: dwc2: do not override forced dr_mode in gadget setup usb: gadget: f_midi: unlock on error USB: digi_acceleport: do sanity checking for the number of ports USB: cypress_m8: add endpoint sanity check USB: mct_u232: add sanity checking in probe usb: fix regression in SuperSpeed endpoint descriptor parsing USB: usbip: fix potential out-of-bounds write usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler() usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize usb: phy: qcom-8x16: fix regulator API abuse usb: ch9: Fix SSP Device Cap wFunctionalitySupport type usb: gadget: composite: Access SSP Dev Cap fields properly ...
2016-04-08Merge tag 'usb-serial-4.6-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc3 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07Merge tag 'fixes-for-v4.6-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc3 We have two more fixes to f_midi. It should now behave much better. dwc3-keystone.c has gotten a fix which now allows it to work on keystone device when running in peripheral mode. A similar fix for DMA configuration was made for udc-core, too. We have a new PCI ID for Intel's Broxton platform. DWC3 can run on those platforms as well. And we also have some dwc2 got a fix for dr_mode usage, while renesas controller got 3 important fixes: a NULL pointer deref fix, IRQ <-> DMA race fix, and a fix to prevent a situation where we would queue a request to a disabled endpoint.
2016-04-07USB: option: add "D-Link DWM-221 B1" device idBjørn Mork
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch
The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-06usb: dwc3: keystone: drop dma_mask configurationGrygorii Strashko
The Keystone 2 supports DT-boot only, as result dma_mask will be always configured properly from DT - of_platform_device_create_pdata()->of_dma_configure(). More over, dwc3-keystone.c can be built as module and in this case it's unsafe to assign local variable as dma_mask. Hence, remove dma_mask configuration code. Cc: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-06usb: gadget: udc-core: remove manual dma configurationGrygorii Strashko
Since commit 7ace8fc8219e ("usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU") it is not necessary to configure DMA for usb_gadget device manually, because all DMA operation are performed using parent/controller device. Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-06usb: dwc3: pci: add ID for one more Intel Broxton platformHeikki Krogerus
BXT-M is a Intel Broxton SoC based platform with unique PCI ID. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done()Yoshihiro Shimoda
This patch fixes an issue that usbhsg_queue_done() may cause kernel panic when dma callback is running and usb_ep_disable() is called by interrupt handler. (Especially, we can reproduce this issue using g_audio with usb-dmac driver.) For example of a flow: usbhsf_dma_complete (on tasklet) --> usbhsf_pkt_handler (on tasklet) --> usbhsg_queue_done (on tasklet) *** interrupt happened and usb_ep_disable() is called *** --> usbhsg_queue_pop (on tasklet) Then, oops happened. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-04usb: dwc2: do not override forced dr_mode in gadget setupPrzemek Rudy
The host/device mode set with dr_mode should be kept all the time, not being changed to OTG in gadget setup (by overriding CFGUSB_FORCEDEVMODE and CFGUSB_FORCEHOSTMODE bits). Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Przemek Rudy <prudy1@o2.pl> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-04usb: gadget: f_midi: unlock on errorDan Carpenter
We added some new locking here, but missed an error path where we need to unlock. Fixes: 9acdf4df2fc4 ('usb: gadget: f_midi: added spinlock on transmit function') Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-31USB: digi_acceleport: do sanity checking for the number of portsOliver Neukum
The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61 Signed-off-by: Oliver Neukum <ONeukum@suse.com> [johan: fix OOB endpoint check and add error messages ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-31USB: cypress_m8: add endpoint sanity checkOliver Neukum
An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-31USB: mct_u232: add sanity checking in probeOliver Neukum
An attack using the lack of sanity checking in probe is known. This patch checks for the existence of a second port. CVE-2016-3136 Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org [johan: add error message ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-30usb: fix regression in SuperSpeed endpoint descriptor parsingMathias Nyman
commit b37d83a6a414 ("usb: Parse the new USB 3.1 SuperSpeedPlus Isoc endpoint companion descriptor") caused a regression in 4.6-rc1 and fails to parse SuperSpeed endpoint companion descriptors. The new SuperSpeedPlus Isoc endpoint companion parsing code incorrectly decreased the the remaining buffer size before comparing the size with the expected length of the descriptor. This lead to possible failure in reading the SuperSpeed endpoint companion descriptor of the last endpoint, displaying a message like: "No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values" Fix it by decreasing the size after comparing it. Also finish all the SS endpoint companion parsing before calling SSP isoc endpoint parsing function. Fixes: b37d83a6a414 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-30USB: usbip: fix potential out-of-bounds writeIgnat Korchagin
Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by: Ignat Korchagin <ignat.korchagin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-30usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transferYoshihiro Shimoda
This patch adds a code to surely disable TX IRQ of the pipe before starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs may happen in rare cases when DMAC is used. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-30usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()Yoshihiro Shimoda
When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-30usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSizeFelipe F. Tonello
buflen by default (256) is smaller than wMaxPacketSize (512) in high-speed devices. That caused the OUT endpoint to freeze if the host send any data packet of length greater than 256 bytes. This is an example dump of what happended on that enpoint: HOST: [DATA][Length=260][...] DEVICE: [NAK] HOST: [PING] DEVICE: [NAK] HOST: [PING] DEVICE: [NAK] ... HOST: [PING] DEVICE: [NAK] This patch fixes this problem by setting the minimum usb_request's buffer size for the OUT endpoint as its wMaxPacketSize. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-30usb: phy: qcom-8x16: fix regulator API abuseArnd Bergmann
gcc warns about the use of regulators in phy_8x16_probe: drivers/usb/phy/phy-qcom-8x16-usb.c: In function 'phy_8x16_probe': drivers/usb/phy/phy-qcom-8x16-usb.c:284:13: error: 'regs[0].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/usb/phy/phy-qcom-8x16-usb.c:285:13: error: 'regs[1].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/usb/phy/phy-qcom-8x16-usb.c:286:12: error: 'regs[2].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] According to Mark Brown, this is the result of various abuses of the PHY interfaces [1], so let's fix the driver instead. This puts the regulator bulk data into the device structure so it gets properly initialized and lets us call regulator_bulk_enable() and regulator_bulk_disable() rather than open-coding them. Setting the voltages the way the driver does is rather pointless because for each regulator there is only one valid voltage range, so that can just get set up in the DT. As there doesn't seem to be any user of the newly added driver yet, we can simply make sure the DTs are setting this up right when they get added. I'm also fixing the handling of regulator_bulk_enable() failure. Right now, the driver just ignores any failure, which doesn't make sense, so I'm changing it to loudly complain (in case we actually had a bug here) and error out. Doing a fly-by review of the driver, I notice a couple of other problems that I'm not addressing here: - It really should not have been written as a USB PHY driver, but instead should use the PHY subsystem. - The DT compatible string does not follow the usual conventions, and it should have a proper identifier in it rather than a wildcard. - The example in the devicetree binding lists a register address that is the same as the actual EHCI host controller in the SoC as well as the otg-snps and the ci-hdrc device, which indicates that these are probably not even distinct devices (or all but one of them are wrong), and if more than one of them tries to request the resources correctly, they fail. [1] https://lkml.org/lkml/2016/1/26/267 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-29usb: gadget: composite: Access SSP Dev Cap fields properlyJohn Youn
Access multi-byte fields of the SSP Dev Cap descriptor using the correct endianness. Fixes: f228a8de242a ("usb: gadget: composite: Return SSP Dev Cap descriptor") Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-29usb: gadget: udc: atmel: don't disable enpdoints we don't ownFelipe Balbi
UDC driver should NEVER do anything behind udc-core's back, so let's stop disabling endpoints we don't exactly own - rather we provide as resources for gadget drivers. This fixes the regression reported by Gil. Reported-by: Gil Weber <gil.weber@servelec-technologies.com> Tested-by: Gil Weber <gil.weber@servelec-technologies.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-29usb: dwc3: gadget: fix endpoint renamingFelipe Balbi
We were exitting the function before actually renaming anything. While at that, also always leave control endpoint un-renamed. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-29usb: dwc3: gadget: release spin lock during gadget resumeJiebing Li
It's a requirement that we release controller's lock while calling gadget API function pointers. This patch just fixes that long standing bug. Signed-off-by: Jiebing Li <jiebing.li@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 08:57:25 +0000