summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2020-03-26Merge tag 'usb-serial-5.7-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.7-rc1 Here are the USB-serial updates for 5.7-rc1, including: - support for a new family of Fintek devices - fix for an io-edgeport slab-out-of-bounds access - fixes for a couple of kernel-doc issues Included are also various clean ups and some new modem device ids. All but the io-edgeport fix have been in linux-next with no reported issues. * tag 'usb-serial-5.7-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback USB: serial: option: add Wistron Neweb D19Q1 USB: serial: option: add BroadMobi BM806U USB: serial: option: add support for ASKEY WWHC050 USB: serial: f81232: add control driver for F81534A USB: serial: fix tty cleanup-op kernel-doc USB: serial: clean up carrier-detect helper USB: serial: f81232: set F81534A serial port with RS232 mode USB: serial: f81232: add F81534A support USB: serial: f81232: use devm_kzalloc for port data USB: serial: f81232: add tx_empty function USB: serial: f81232: extract LSR handler USB: serial: digi_acceleport: remove redundant assignment to pointer priv USB: serial: relax unthrottle memory barrier
2020-03-26USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callbackQiujun Huang
Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-25USB: serial: option: add Wistron Neweb D19Q1Pawel Dembicki
This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-25USB: serial: option: add BroadMobi BM806UPawel Dembicki
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2033 Rev= 2.28 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=f842866cfd5a C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-25USB: serial: option: add support for ASKEY WWHC050Pawel Dembicki
ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-23Merge 5.6-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18USB: serial: f81232: add control driver for F81534AJi-Ze Hong (Peter Hong)
The Fintek F81534A series contains 1 HUB, 1 GPIO device and n UARTs. The UARTs are disabled by default and need to be enabled by the GPIO device (2c42:16F8). When F81534A plug to host, we can only see 1 HUB and 1 GPIO device and we write 0x8fff to GPIO device register F81534A_CTRL_CMD_ENABLE_PORT (116h) to enable all available serial ports. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [johan: reword commit message and an error message slightly] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-12USB: serial: pl2303: add device-id for HP LD381Scott Chen
Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-12USB: serial: option: add ME910G1 ECM composition 0x110bDaniele Palmas
Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-11USB: serial: fix tty cleanup-op kernel-docJohan Hovold
The tty cleanup operation is called with a struct tty as its sole parameter. Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-11USB: serial: clean up carrier-detect helperJohan Hovold
Drop the struct tty_port pointer and rename the struct usb_serial_port pointer "port", which is the named used throughout the subsystem and incidentally also matches the kernel-doc comment. Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-25USB: serial: f81232: set F81534A serial port with RS232 modeJi-Ze Hong (Peter Hong)
The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device and the serial ports are default disabled. Each port contains max 3 pins GPIO and the 3 pins are default pull high with input mode. When the serial port had activated (running probe()), we'll transform the 3 pins from GPIO function publicly to control Tranceiver privately use. We'll default set to 0/0/1 for control transceiver to RS232 mode. Otherwise, If the serial port is not active, the 3 pins is in GPIO mode and controlled by global GPIO device with VID/PID: 2c42/16f8. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-25USB: serial: f81232: add F81534A supportJi-Ze Hong (Peter Hong)
The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device and the serial port is default disabled when plugin computer. The IC is contains devices as following: 1. HUB (all devices is connected with this hub) 2. GPIO/Control device. (enable serial port and control GPIOs) 3. serial port 1 to x (2/4/8/12) It's most same with F81232, the UART device is difference as follow: 1. TX/RX bulk size is 128/512bytes 2. RX bulk layout change: F81232: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... F81534A:[LEN][Data.....][LSR] Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [johan: reword an error message] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-25USB: serial: f81232: use devm_kzalloc for port dataJi-Ze Hong (Peter Hong)
Use devm_kzalloc() to replace kzalloc() in port_probe(). Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-25USB: serial: f81232: add tx_empty functionJi-Ze Hong (Peter Hong)
Add tx_empty() function for F81232. Without this, console redirection will get garbage data. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-25USB: serial: f81232: extract LSR handlerJi-Ze Hong (Peter Hong)
Extract LSR handler to function that can be re-used by F81532A/534A/535/536. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-24Merge 5.6-rc3 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-23USB: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200220132017.GA29262@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10USB: serial: digi_acceleport: remove redundant assignment to pointer privColin Ian King
Pointer priv is being assigned with a value that is never read, it is assigned a new value later on in a for-loop. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-10USB: serial: relax unthrottle memory barrierJohan Hovold
Commit a8d78d9f3856 ("USB: serial: clean up throttle handling") converted the throttle handling to use atomic bitops. This means that we can relax the smp_mb() in unthrottle() to smp_mb__after_atomic(), which for example is a no-op on architectures like x86 that provide fully ordered atomics. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-10USB: serial: ch341: fix receiver regressionJohan Hovold
While assumed not to make a difference, not using the factor-2 prescaler makes the receiver more susceptible to errors. Specifically, there have been reports of problems with devices that cannot generate a 115200 rate with a smaller error than 2.1% (e.g. 117647 bps). But this can also be reproduced with a low-speed RS232 tranceiver at 115200 when the input rate matches the nominal rate. So whenever possible, enable the factor-2 prescaler and halve the divisor in order to use settings closer to that of the previous algorithm. Fixes: 35714565089e ("USB: serial: ch341: reimplement line-speed handling") Cc: stable <stable@vger.kernel.org> # 5.5 Reported-by: Jakub Nantl <jn@forever.cz> Tested-by: Jakub Nantl <jn@forever.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-02-10USB: serial: ir-usb: Silence harmless uninitialized variable warningDan Carpenter
The "actual_length" variable might be uninitialized on some failure paths. It's harmless but static analysis tools like Smatch complain and at runtime the UBSan tool will likely complain as well. Fixes: e7542bc382f8 ("USB: serial: ir-usb: make set_termios synchronous") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-27Merge tag 'usb-serial-5.6-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: Here are the USB-serial updates for 5.6-rc1, including: - a missing ir-usb endpoint sanity check - fixes for two long-standing regressions in ir-usb - opticon chars_in_buffer support Included are also various clean ups. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check USB: serial: garmin_gps: Use flexible-array member USB: serial: opticon: stop all I/O on close() USB: serial: opticon: add chars_in_buffer() implementation
2020-01-23USB: serial: cyberjack: fix spelling mistake "To" -> "Too"Colin Ian King
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-23USB: serial: ir-usb: simplify endpoint checkJohan Hovold
Simplify the endpoint sanity check by letting core verify that the required endpoints are present. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-23USB: serial: ir-usb: make set_termios synchronousJohan Hovold
Use a synchronous usb_bulk_msg() when switching link speed in set_termios(). This way we do not need to keep track of outstanding URBs in order to be able to stop them at close. Note that there's no need to set URB_ZERO_PACKET as the one-byte transfer will always be short. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-23USB: serial: ir-usb: fix IrLAP framingJohan Hovold
Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") switched to using the generic write implementation which may combine multiple write requests into larger transfers. This can break the IrLAP protocol where end-of-frame is determined using the USB short packet mechanism, for example, if multiple frames are sent in rapid succession. Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") Cc: stable <stable@vger.kernel.org> # 2.6.35 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-23USB: serial: ir-usb: fix link-speed handlingJohan Hovold
Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable <stable@vger.kernel.org> # 2.6.27 Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-23USB: serial: ir-usb: add missing endpoint sanity checkJohan Hovold
Add missing endpoint sanity check to avoid dereferencing a NULL-pointer on open() in case a device lacks a bulk-out endpoint. Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") the oops would instead happen on open() if the device lacked a bulk-in endpoint and on write() if it lacked a bulk-out endpoint. Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-21Merge 5.5-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17USB: serial: quatech2: handle unbound portsJohan Hovold
Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: keyspan: handle unbound portsJohan Hovold
Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: add missing active-port sanity checkJohan Hovold
The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: handle unbound ports on URB completionJohan Hovold
Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: ch341: handle unbound port at reset_resumeJohan Hovold
Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: garmin_gps: Use flexible-array memberGustavo A. R. Silva
Old code in the kernel uses 1-byte and 0-byte arrays to indicate the presence of a "variable length array": struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); There is also 0-byte arrays. Both cases pose confusion for things like sizeof(), CONFIG_FORTIFY_SOURCE, etc.[1] Instead, the preferred mechanism to declare variable-length types such as the one above is a flexible array member[2] which need to be the last member of a structure and empty-sized: struct something { int stuff; u8 data[]; }; Also, by making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced[3] to the codebase from now on. [1] https://github.com/KSPP/linux/issues/21 [2] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: opticon: stop all I/O on close()Johan Hovold
Make sure to stop any submitted write URBs on close(). Note that the tty layer will wait up to 30 seconds for the buffers to drain before close() is called. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: opticon: add chars_in_buffer() implementationJohan Hovold
Add a chars_in_buffer() implementation so that the tty layer will wait for outgoing buffered data to be drained when needed (e.g. on final close()). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: suppress driver bind attributesJohan Hovold
USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-16USB: serial: option: add support for Quectel RM500Q in QDL modeReinhard Speyerer
Add support for Quectel RM500Q in QDL mode. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 0.00 S: Manufacturer=Qualcomm CDMA Technologies MSM S: Product=QUSB_BULK_SN:xxxxxxxx S: SerialNumber=xxxxxxxx C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is assumed that the ZLP flag required for other Qualcomm-based 5G devices also applies to Quectel RM500Q. Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-14USB: serial: opticon: fix control-message timeoutsJohan Hovold
The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable <stable@vger.kernel.org> # 2.6.39 Cc: Martin Jansen <martin.jansen@opticon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-13USB: serial: option: Add support for Quectel RM500QKristian Evensen
RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. Unlike other recent Quectel modems, it is possible to identify the diagnostic interface (bInterfaceProtocol is unique). Thus, there is no need to check for the number of endpoints or reserve interfaces. The interface number is still dynamic though, so matching on interface number is not possible and two entries have to be added to the table. Output from usb-devices with all interfaces enabled (order is diag, nmea, at_port, modem, rmnet and adb): Bus 004 Device 007: ID 2c7c:0800 Quectel Wireless Solutions Co., Ltd. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd. idProduct 0x0800 bcdDevice 4.14 iManufacturer 1 Quectel iProduct 2 LTE-A Module iSerial 3 40046d60 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 328 bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 DIAG_SER_RMNET bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 224mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 CDEV Serial Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 6 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 42 bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 1 micro seconds bU2DevExitLat 500 micro seconds ** UNRECOGNIZED: 14 10 0a 00 01 00 00 00 00 11 00 00 30 40 0a 00 b0 40 0a 00 Device Status: 0x0000 (Bus Powered) Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-13USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xxJerónimo Borque
Add device-ids for the Motorola Solutions TETRA radios MTP3xxx series and MTP85xx series $ lsusb -vd 0cad: Bus 001 Device 009: ID 0cad:9015 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9015 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Bus 001 Device 010: ID 0cad:9013 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9013 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-13Merge 5.5-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-20USB: serial: option: add ZLP support for 0x1bc7/0x9010Daniele Palmas
Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet to be sent if out data size is is equal to the endpoint max size. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> [ johan: switch operands in conditional ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-12-16USB: serial: option: add Telit ME910G1 0x110a compositionDaniele Palmas
This patch adds the following Telit ME910G1 composition: 0x110a: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-12-16Merge 5.5-rc2 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10USB: serial: io_edgeport: fix epic endpoint lookupJohan Hovold
Make sure to use the current alternate setting when looking up the endpoints on epic devices to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: drop comment about 2 uhci driversRandy Dunlap
Drop the ancient comment about 2 usb/uhci drivers since there are no longer 2 of them. Cc: Johan Hovold <johan@kernel.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/5f93d906-4f5c-2a78-c1c7-36cf07e94bcc@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21usb: serial: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132856.29130-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 14:00:24 +0000