summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2011-04-13Revert "USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)"Johan Hovold
This reverts commit 90593899de83a6e6fdea563d058acd2f4334e3f9. SAM-BA devices identify themselves CDC-ACM devices and should be using the cdc-acm driver. Since commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 (USB: cdc-acm: Add pseudo modem without AT command capabilities) cdc-acm also binds to them. Note that the Atmel SAM-BA tools expect to use a USB-serial driver and thus require a symlink from /dev/ttyACMn to some /dev/ttyUSBm (with m < 30) to be able to select the device. This is simply a UI-issue that should be fixed by Atmel. Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Sven Köhler <sven.koehler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-04usb/serial: fix function args warnings, dropping *filpRandy Dunlap
Fix build warnings caused by removal of *filp arg in struct usb_serial_driver. These changes were missed somehow in commits 00a0d0d65b61 ("tty: remove filp from the USB tty ioctls") and 60b33c133ca0b ("tiocmget: kill off the passing of the struct file") drivers/usb/serial/mct_u232.c:159: warning: initialization from incompatible pointer type drivers/usb/serial/opticon.c:627: warning: initialization from incompatible pointer type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23usb: wwan: fix compilation without CONFIG_PM_RUNTIMEOliver Neukum
The pm usage counter must be accessed with the proper wrappers to allow compilation under all configurations. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-16Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits) pch_uart: reference clock on CM-iTC pch_phub: add new device ML7213 n_gsm: fix UIH control byte : P bit should be 0 n_gsm: add a documentation serial: msm_serial_hs: Add MSM high speed UART driver tty_audit: fix tty_audit_add_data live lock on audit disabled tty: move cd1865.h to drivers/staging/tty/ Staging: tty: fix build with epca.c driver pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Staging: generic_serial: fix double locking bug nozomi: don't use flush_scheduled_work() tty/serial: Relax the device_type restriction from of_serial MAINTAINERS: Update HVC file patterns tty: phase out of ioctl file pointer for tty3270 as well tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile pch_uart: Fix DMA channel miss-setting issue. pch_uart: fix exclusive access issue pch_uart: fix auto flow control miss-setting issue pch_uart: fix uart clock setting issue pch_uart : Use dev_xxx not pr_xxx ... Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied twice, then changes to the same area in one branch)
2011-03-16Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits) USB: Add support for SuperSpeed isoc endpoints xhci: Clean up cycle bit math used during stalls. xhci: Fix cycle bit calculation during stall handling. xhci: Update internal dequeue pointers after stalls. USB: Disable auto-suspend for USB 3.0 hubs. USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol. xhci: Return canceled URBs immediately when host is halted. xhci: Fixes for suspend/resume of shared HCDs. xhci: Fix re-init on power loss after resume. xhci: Make roothub functions deal with device removal. xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports. xhci: Return a USB 3.0 hub descriptor for USB3 roothub. xhci: Register second xHCI roothub. xhci: Change xhci_find_slot_id_by_port() API. xhci: Refactor bus suspend state into a struct. xhci: Index with a port array instead of PORTSC addresses. USB: Set usb_hcd->state and flags for shared roothubs. usb: Make core allocate resources per PCI-device. usb: Store bus type in usb_hcd, not in driver flags. usb: Change usb_hcd->bandwidth_mutex to a pointer. ...
2011-03-11USB: serial: ch341: add new idwangyanqing
I picked up a new DAK-780EX(professional digitl reverb/mix system), which use CH341T chipset to communication with computer on 3/2011 and the CH341T's vendor code is 1a86 Looking up the CH341T's vendor and product id's I see: 1a86 QinHeng Electronics 5523 CH341 in serial mode, usb to serial port converter CH341T,CH341 are the products of the same company, maybe have some common hardware, and I test the ch341.c works well with CH341T Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09USB: serial: ftdi_sio: adding support for OLIMEX ARM-USB-OCD-HJF Argentino
Adding support for the OLIMEX ARM-USB-OCD-H JTAG device (id 15ba:002b) based on FTDI FT2232H Signed-off-by: JF Argentino <jf.argentino@free.fr> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626Herton Ronaldo Krzesinski
On https://bugs.launchpad.net/ubuntu/+source/linux/+bug/636091, one of the cases reported is a big timeout on option_send_setup, which causes some side effects as tty_lock is held. Looks like some of ZTE MF626 devices also don't like the RTS/DTR setting in option_send_setup, like with 4G XS Stick W14. The reporter confirms which this it solves the long freezes in his system. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-02USB: Remove unused timeout from io_edgeport.cHuzaifa Sidhpurwala
timeout variable is not used anywhere in int write_cmd_usb, remove it Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28USB: serial/kobil_sct, fix potential tty NULL dereferenceJiri Slaby
Make sure that we check the return value of tty_port_tty_get. Sometimes it may return NULL and we later dereference that. The only place here is in kobil_read_int_callback, so fix it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28USB: serial/keyspan_pda, fix potential tty NULL dereferencesJiri Slaby
Make sure that we check the return value of tty_port_tty_get. Sometimes it may return NULL and we later dereference that. There are several places to check. For easier handling, tty_port_tty_get is moved directly to the palce where needed in keyspan_pda_rx_interrupt. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25USB: opticon: add rts and cts supportMartin Jansen
Add support for RTS and CTS line status Signed-off-by: Martin Jansen <martin.jansen@opticon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25USB: serial drivers need to use larger bulk-in buffersAlan Stern
When a driver doesn't know how much data a device is going to send, the buffer size should be at least as big as the endpoint's maxpacket value. The serial drivers don't follow this rule; many of them request only 256-byte bulk-in buffers. As a result, they suffer overflow errors if a high-speed device wants to send a lot of data, because high-speed bulk endpoints are required to have a maxpacket size of 512. This patch (as1450) fixes the problem by using the driver's bulk_in_size value as a minimum, always allocating buffers no smaller than the endpoint's maxpacket size. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Flynn Marquardt <flynn@flynnux.de> CC: <stable@kernel.org> [after .39-rc1 is out] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25USB: serial: mos7720: Fix possible null pointer dereferenceHuzaifa Sidhpurwala
Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-25USB: serial: keyspan: Fix possible null pointer dereference.Huzaifa Sidhpurwala
Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24Merge 2.6.38-rc6 into tty-nextGreg Kroah-Hartman
This was to resolve a merge issue with drivers/char/Makefile and drivers/tty/serial/68328serial.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: now phase out the ioctl file pointer for goodAlan Cox
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tty: remove filp from the USB tty ioctlsAlan Cox
We don't use it so we can trim it from here as we try and stamp the file object dependencies out of the serial code. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17USB: sierra: error handling in runtime PMOliver Neukum
resumption of devices can fail. Errors must be handled. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17usb_wwan: fix error case in close()Oliver Neukum
The device never needs to be resumed in close(). But the counters must be balanced. As resumption can fail, but the counters must be balanced, use the _no_resume() version which cannot fail. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17usb_wwan: error case of resumeOliver Neukum
If an error happens during resumption. The remaining data has to be cleanly discarded and the pm counters have to be adjusted. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17usb_wwan: data consistency in error caseOliver Neukum
As soon as the first error happens, the write must be stopped, lest we send mutilated messages. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17usb_wwan: fix runtime PM in error caseOliver Neukum
An error in the write code path would permanently disable runtime PM in this driver Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17usb_wwan: fix error in marking device busyOliver Neukum
This fixes two errors: - the device is busy if a message was recieved even if resubmission fails - the device is not busy if resubmission fails due to -EPERM Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17sierra: add new ID for Airprime/Sierra USB IP modemJon Thomas
I picked up a new Sierra usb 308 (At&t Shockwave) on 2/2011 and the vendor code is 0x0f3d Looking up vendor and product id's I see: 0f3d Airprime, Incorporated 0112 CDMA 1xEVDO PC Card, PC 5220 Sierra and Airprime are somehow related and I'm guessing the At&t usb 308 might be have some common hardware with the AirPrime SL809x. Signed-off-by: Jon Thomas <jthomas@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17USB: serial/usb_wwan, fix tty NULL dereferenceJiri Slaby
tty_port_tty_get may return without any problems NULL. Handle this case and do not oops in usb_wwan_indat_callback by dereferencing it. The oops: Unable to handle kernel paging request for data at address 0x000000d8 Faulting instruction address: 0xc0175b3c Oops: Kernel access of bad area, sig: 11 [#1] PowerPC 40x Platform last sysfs file: /sys/devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:09.2/usb1/idVendor Modules linked in: NIP: c0175b3c LR: c0175e7c CTR: c0215c90 REGS: c77f7d50 TRAP: 0300 Not tainted (2.6.37-rc5) MSR: 00021030 <ME,CE,IR,DR> CR: 88482028 XER: 2000005f DEAR: 000000d8, ESR: 00000000 TASK = c7141b90[1149] 'wvdial' THREAD: c2750000 GPR00: 00021030 c77f7e00 c7141b90 00000000 0000000e 00000000 0000000e c0410680 GPR08: c683db00 00000000 00000001 c03c81f8 88482028 10073ef4 ffffffb9 ffffff94 GPR16: 00000000 fde036c0 00200200 00100100 00000001 ffffff8d c34fabcc 00000000 GPR24: c71120d4 00000000 00000000 0000000e 00021030 00000000 00000000 0000000e NIP [c0175b3c] tty_buffer_request_room+0x2c/0x194 LR [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 Call Trace: [c77f7e00] [00000003] 0x3 (unreliable) [c77f7e30] [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 [c77f7e60] [c0215df4] usb_wwan_indat_callback+0x164/0x170 ... References: https://bugzilla.kernel.org/show_bug.cgi?id=24582 Cc: Amit Shah <amitshah@gmx.net> Cc: baoyb <baoyb@avit.org.cn> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17USB: Add Samsung SGH-I500/Android modem ID switch to visor driverMaciej Szmigiero
[USB]Add Samsung SGH-I500/Android modem ID switch to visor driver Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the modem part of some of their Android phones. At least Galaxy Spica is affected. This modem needs ACM driver and does not work with visor driver which binds the conflicting ID for SGH-I500. Because SGH-I500 is pretty an old hardware its best to add switch to visor driver in cause somebody still wants to use that phone with Linux. Note that this is needed only when using the Android phone as modem, not in USB storage or ADB mode. Signed-off-by: Maciej Szmigiero <mhej@o2.pl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17Merge 2.6.38-rc5 into usb-nextGreg Kroah-Hartman
This is needed to resolve some merge conflicts that were found in the USB host controller patches, and reported by Stephen Rothwell. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04USB: serial: mct_u232: added _ioctl, _msr_to_icount and _get_icount functionsVadim Tsozik
Added mct_u232_ioctl (implements TIOCMIWAIT command), mct_u232_get_icount (implements TIOCGICOUNT command) and mct_u232_msr_to_icount functions. MCT U232 P9 is one of a few usb to serail adapters which converts USB +/-5v voltage levels to COM +/-15 voltages. So it can also power COM interfaced devices. This makes it very usable for legacy COM interfaced data-acquisition hardware. I tested new implementation with AWARE Electronics RM-60 radiation meter, which sends pulse via RNG COM line whenever new particle is registered. Signed-off-by: Vadim Tsozik <tsozik@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: ftdi_sio: Add VID=0x0647, PID=0x0100 for Acton Research spectrographMichael Williamson
Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by: Michael H Williamson <michael.h.williamson@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: ftdi_sio: add ST Micro Connect Lite uart supportJean-Christophe PLAGNIOL-VILLARD
on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: ti_usb: fix module removalIonut Nicu
If usb_deregister() is called after usb_serial_deregister() when the device is plugged in, the following Oops occurs: [ 95.337377] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 95.338236] IP: [<c0776b2d>] klist_put+0x12/0x62 [ 95.338356] *pdpt = 000000003001a001 *pde = 0000000000000000 [ 95.338356] Oops: 0000 [#1] SMP [ 95.340499] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb8/idVendor [ 95.340499] Modules linked in: ti_usb_3410_5052(-) usbserial cpufreq_ondemand acpi_cpufreq mperf iptable_nat nf_nat iptable_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb iwlagn iwlcore mac80211 cfg80211 microcode pcspkr acer_wmi joydev wmi sky2 [last unloaded: scsi_wait_scan] [ 95.341908] [ 95.341908] Pid: 1532, comm: modprobe Not tainted 2.6.37-rc7+ #6 Eiger /Aspire 5930 [ 95.341908] EIP: 0060:[<c0776b2d>] EFLAGS: 00010246 CPU: 0 [ 95.341908] EIP is at klist_put+0x12/0x62 [ 95.341908] EAX: 00000000 EBX: eedc0c84 ECX: c09c21b4 EDX: 00000001 [ 95.341908] ESI: 00000000 EDI: efaa0c1c EBP: f214fe2c ESP: f214fe1c [ 95.341908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 95.341908] Process modprobe (pid: 1532, ti=f214e000 task=efaaf080 task.ti=f214e000) [ 95.341908] Stack: [ 95.341908] f214fe24 eedc0c84 efaaf080 efaa0c1c f214fe34 c0776ba8 f214fe5c c0776c76 [ 95.341908] c09c21b4 c09c21b4 eedc0c84 efaaf080 00000000 c0634398 eafe2d1c f7b515f0 [ 95.341908] f214fe6c c0631b5c eafe2d50 eafe2d1c f214fe7c c0631ba2 eafe2d1c eafe2c00 [ 95.341908] Call Trace: [ 95.341908] [<c0776ba8>] ? klist_del+0xd/0xf [ 95.341908] [<c0776c76>] ? klist_remove+0x48/0x74 [ 95.341908] [<c0634398>] ? devres_release_all+0x49/0x51 [ 95.341908] [<c0631b5c>] ? __device_release_driver+0x7b/0xa4 [ 95.341908] [<c0631ba2>] ? device_release_driver+0x1d/0x28 [ 95.341908] [<c06317c4>] ? bus_remove_device+0x92/0xa1 [ 95.341908] [<c062f3d8>] ? device_del+0xf9/0x13e [ 95.341908] [<f7b06146>] ? usb_serial_disconnect+0xd9/0x116 [usbserial] [ 95.341908] [<c0681e3f>] ? usb_disable_interface+0x32/0x40 [ 95.341908] [<c0683972>] ? usb_unbind_interface+0x48/0xfd [ 95.341908] [<c0631b43>] ? __device_release_driver+0x62/0xa4 [ 95.341908] [<c06320b9>] ? driver_detach+0x62/0x81 [ 95.341908] [<c0631a41>] ? bus_remove_driver+0x8f/0xae [ 95.341908] [<c063214c>] ? driver_unregister+0x50/0x57 [ 95.341908] [<c0682f95>] ? usb_deregister+0x77/0x84 [ 95.341908] [<f7b505b6>] ? ti_exit+0x26/0x28 [ti_usb_3410_5052] [ 95.341908] [<c046a307>] ? sys_delete_module+0x181/0x1de [ 95.341908] [<c04e2727>] ? path_put+0x1a/0x1d [ 95.341908] [<c047f4c5>] ? audit_syscall_entry+0x116/0x138 [ 95.341908] [<c04094df>] ? sysenter_do_call+0x12/0x28 [ 95.341908] Code: 00 83 7d f0 00 74 09 85 f6 74 05 89 f0 ff 55 f0 8b 43 04 5a 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e 10 88 55 f0 e8 47 26 01 00 8a 55 f0 84 d2 74 17 f6 03 01 [ 95.341908] EIP: [<c0776b2d>] klist_put+0x12/0x62 SS:ESP 0068:f214fe1c [ 95.341908] CR2: 0000000000000010 [ 95.342357] ---[ end trace 8124d00ad871ad18 ]--- Signed-off-by: Ionut Nicu <ionut.nicu@mindbit.ro> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03USB: io_edgeport: fix the reported firmware major and minorBjørn Mork
The major and minor number saved in the product_info structure were copied from the address instead of the data, causing an inconsistency in the reported versions during firmware loading: usb 4-1: firmware: requesting edgeport/down.fw /usr/src/linux/drivers/usb/serial/io_edgeport.c: downloading firmware version (930) 1.16.4 [..] /usr/src/linux/drivers/usb/serial/io_edgeport.c: edge_startup - time 3 4328191260 /usr/src/linux/drivers/usb/serial/io_edgeport.c: FirmwareMajorVersion 0.0.4 This can cause some confusion whether firmware loaded successfully or not. Cc: stable@kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: ftdi_sio: fix resolution of 2232H baud rate dividersDaniel Glöckner
The 2232H high speed baud rates also support fractional baud rate divisors, but when the performing the divisions before the multiplication, the fractional bits are lost. Signed-off-by: Daniel Glöckner <dg@emlix.com> Acked-by: Mark Adamson <mark.adamson@ftdichip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: serial: handle Data Carrier Detect changesLibor Pechacek
Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: serial: Updated support for ICOM devicesPieter Maes
I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited. I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are. Signed-off-by: Pieter Maes <maescool@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22drivers: update to pl2303 usb-serial to support Motorola cablesDario Lombardo
Added 0x0307 device id to support Motorola cables to the pl2303 usb serial driver. This cable has a modified chip that is a pl2303, but declares itself as 0307. Fixed by adding the right device id to the supported devices list, assigning it the code labeled PL2303_PRODUCT_ID_MOTOROLA. Signed-off-by: Dario Lombardo <dario.lombardo@libero.it> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: adding USB support for Cinterion's HC2x, EU3 and PH8 productsNicolaus Colberg
/drivers/usb/serial/option.c: Adding support for Cinterion's HC25, HC28, HC28J, EU3-E, EU3-P and PH8 by correcting/adding Cinterion's and Siemens' Vendor IDs as well as Product IDs and USB_DEVICE tuples Signed-off-by: Nicolaus Colberg <nicolaus.colberg@cinterion.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB serial: add missing .usb_driver field in serial driversAlan Stern
This patch (as1443) fixes a bug found in many of the USB serial drivers: They don't set the .usb_driver field in their usb_serial_driver structure. This field is needed for assigning dynamic IDs for device matching. In addition, starting with the 2.6.37 kernel, the .usb_driver field is needed for proper autosuspend operation. Without it, attempts to open the device file will fail. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Dan Williams <dcbw@redhat.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: CP210x Removed incorrect device IDCraig Shelley
Device ID removed 0x10C4/0x8149 for West Mountain Radio Computerized Battery Analyzer. This device is actually based on a SiLabs C8051Fxxx, see http://www.etheus.net/SiUSBXp_Linux_Driver for further info. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: CP210x Add two device IDsCraig Shelley
Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and DekTec DTA Plus VHF/UHF Booster/Attenuator. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22USB: qcaux: add Pantech UML290 device IDDan Williams
Another CDC-ACM + vendor specific interface layout for the QCDM port. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-10Merge branch 'staging-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (510 commits) staging: speakup: fix failure handling staging: usbip: remove double giveback of URB Staging: batman-adv: Remove batman-adv from staging Staging: hv: Use only one txf buffer per channel and kmalloc/GFP_KERNEL on initialize staging: hv: remove unneeded osd_schedule_callback staging: hv: convert channel_mgmt.c to not call osd_schedule_callback staging: hv: convert vmbus_on_msg_dpc to not call osd_schedule_callback staging: brcm80211: Fix WL_<type> logging macros Staging: IIO: DDS: AD9833 / AD9834 driver Staging: IIO: dds.h convenience macros Staging: IIO: Direct digital synthesis abi documentation staging: brcm80211: Convert ETHER_TYPE_802_1X to ETH_P_PAE staging: brcm80211: Remove unused ETHER_TYPE_<foo> #defines staging: brcm80211: Remove ETHER_HDR_LEN, use ETH_HLEN staging: brcm80211: Convert ETHER_ADDR_LEN to ETH_ALEN staging: brcm80211: Convert ETHER_IS<FOO> to is_<foo>_ether_addr staging: brcm80211: Remove unused ether_<foo> #defines and struct staging: brcm80211: Convert ETHER_IS_MULTI to is_multicast_ether_addr staging: brcm80211: Remove unused #defines ETHER_<foo>_LOCALADDR Staging: comedi: Fix checkpatch.pl issues in file s526.c ... Fix up trivial conflict in drivers/video/udlfb.c
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2010-12-24usb: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is being deprecated. Directly flush or cancel work items instead. * u_ether, isp1301_omap, speedtch conversions are straight-forward. * ochi-hcd should only flush when quirk_nec() is true as otherwise the work wouldn't have been initialized. * In oti6858, cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Duncan Sands <duncan.sands@free.fr> Cc: linux-usb@vger.kernel.org
2010-12-22USB: Merge 2.6.37-rc5 into usb-nextGreg Kroah-Hartman
This is to resolve the conflict in the file, drivers/usb/gadget/composite.c that was due to a revert in Linus's tree needed for the 2.6.37 release. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 09:21:40 +0000