summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.h
AgeCommit message (Collapse)Author
2006-11-16USB: ftdi_sio: adds vendor/product id for a RFID construction kitKjell Myksvoll
Adds the vendor and prodcut id for a RFID construction kit from the Elektor Electronics magazine, september 2006. From: Kjell Myksvoll <kmyksvo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: add SeaLevel 2106 SeaLINK support to ftdi_sioJustin Carlson
We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB serial ftdi_sio: Add support for Tactrix OpenPort devicesIan Abbott
This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07USB: New device ID for ftdi_sio usb serial driverRalf Schlatterbeck
The patch adds a new device ID for the Gamma Scout Geiger counter device. Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11USB: ftdi_sio driver - new PIDsJonathan Davies
Signed-off-by: Jonathan Davies <jjd27@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-02USB: Additional PID for the ftdi_sio driverDave Platt
Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt <dplatt@radagast.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: Add one VID/PID to ftdi_sioColin Leroy
This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: new device ids for ftdi_sio driverChristophe Mariac
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] USB: new device id for Thorlabs motor driverD. Peter Siddons
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1Ian Abbott
This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB product to the ftdi_sio driver's device ID table. The PID was supplied by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list. The PID 0xE050 matches the Windows INF files for this device. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interfaceRazvan Gavril
Signed-off-by: Razvan Gavril <razvan.g@plutohome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08[PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID ReaderIan Abbott
This patch adds support for ACG Identification Technologies GmbH's HF Dual ISO Reader (an RFID tag reader) to the ftdi_sio driver's device ID table. The product ID was supplied by anotonios (anton at goto10 dot org) on the ftdi-usb-sio-devel list and subsequently verified by myself (Ian Abbott). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card readerIan Abbott
This patch adds support for an ASK RDR 400 series contactless card reader <http://www.ask.fr/uk/products_and_services/terminals.html> to the ftdi_sio driver's device ID table. The product ID was supplied by Adriano Couto on the ftdi-usb-sio-devel list. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: Adds support for iPlus device.Luiz Fernando N. Capitulino
Adds support in ftdi_sio usbserial driver for USB modems sold by Plus GSM Company in Poland. Signed-off-by: Luiz Fernando Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USBNathan Bronson
This patch adds recognition of the RR-CirKits LocoBuffer USB to the existing FTDI driver. http://www.rr-cirkits.com Signed-off-by: Nathan Bronson <ngb@sns-usa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: add support for Papouch TMU (USB thermometer)Folkert van Heusden
This patch adds support for new vendor (papouch) and one of their devices - TMU (a USB thermometer). More information: vendor homepage: http://www.papouch.com/en/ product homepage (Polish): http://www.papouch.com/shop/scripts/_detail.asp?katcislo=0188 This patch is based on the submission from Folkert van Heusden [1]. Then reviseted by Kalin KOZHUHAROV [2] and retested by Folkert. [1] http://article.gmane.org/gmane.linux.kernel/392970 [2] http://article.gmane.org/gmane.linux.kernel/393386 Signed-off-by: Folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: ftdi_sio: add support for Eclo COM to 1-Wire USB adapterIan Abbott
This patch adds support for the Eclo COM to 1-Wire USB adapter <http://www.eclo.pt/products_ibutton_adapters_usb01_en.asp> to the ftdi_sio driver's device ID table. Details were provided by Martin Grill on the ftdi-sio-usb-devel mailing list and I (Ian Abbott) confirmed it matched the INF file in the Eclo's Windows driver package. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20[PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor idsA. Maitland Bottoms
The Icom ID-1 1.2 GHz band digital transceiver is a new radio that has a USB interface. With this patch, the ftdi_sio driver will report "Detected FT8U232AM" and provide a serial device interface. Signed-off-by: "A. Maitland Bottoms" <bottoms@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: ftdi_sio: new microHAM device IDsIan Abbott
This patch adds a bunch of new device IDs to the ftdi_sio driver for various devices from microHAM using FTDI chips. Micheal Studer supplied the PID for the USB-Y9 device. I examined the INF file in microHAM's Windows driver package for the USB-KW, USB-YS, USB-IC, USB-DB9 and USB-RS232 devices. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD camerasRui Santos
Documentation: Specify grayscale specification on ATIK-ATK16 and ATIK-ATK16HR comments. New: Add ProductID and VendorID for devices ATIK-ATK16C and ATIK-ATK16HRC. These devices are also USB Astronomical CCD cameras that work through an FTDI 245BM chip, share the same base hardware but, it has a colour CCD chip instead of a grayscale one. Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2Wouter Paesen
The attached patch adds a new PID for the ftdi_sio driver. It will enable support for PC-DJ's DAC-2 controller module (more information on http://www.pcdjhardware.com/DAC2.asp) Signed-off-by: Wouter Paesen <wouter@kangaroot.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: ftdi_sio: new IDs for Westrex devicesIan Abbott
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Cory Lee to support two POS printers made by Westrex International (Model 777 and Model 8900F). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.hLouis Nyffenegger
this patch includes the Vendor Id for a optic fiber to USB device named TTUSB from thought Technology. It's just add the vendor Id to ftdi_sio.h and add the Vendor ID and model Id to table_combined. Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2006-01-04[PATCH] USB: ftdi_sio: new IDs for Teratronik devicesIan Abbott
This patch adds vendor and product IDs to the ftdi_sio driver's device ID table for two devices from teratronik.de. The device IDs were submitted by O. Wölfelschneider of Teratronik Elektronische Systeme GmbH. The charset of the patch is latin-1, same as the original files. Please apply, thanks! (I've tried to avoid a clash with Andrew Morton's patch to add support for Posiflex PP-7700 printer to the same driver.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] USB: Support for Posiflex PP-7000 retail printer in LinuxPavel Fedin
This little patch adds recognition of Posiflex PP-7000 retail printer to ftdo_sio module. The printer uses FT232BM bridge programmed with custom VID/PID. The patch posted to lkml and sf.net was for 2.6.11.1 kernel, here is one reworked for 2.6.12. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-03s/retreiv/retriev/gMatt Mackall
As everyone knows, the rule is: "i before e.. um.. always." Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-11-23[PATCH] USB: ftdi_sio: new IDs for KOBIL devicesIan Abbott
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Stefan Nies of KOBIL Systems for two of their devices using the FTDI chip. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] drivers/usb/serial/ftdi_sio: add PID/VIDThomas Riewe
We would like to add a PID for the Pyramid Appliance Display, which works on USB via FTDI_SIO. Signed-off-by: Thomas Riewe <thomasr@pyramid.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+)
2005-10-28[PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD camerasRui Santos
This patch enables direct kernel support for the Artemis and ATIK astronomical based USB CCD cameras. Since all communications with this camera are done via an FTDI 245BM chip, it was only needed to specify the ProductID and VendorID of all three devices. In what tests are concerned, data was transfered from and to the FTDI at the chips Top speed (360KB/s). Signed-off-by: Rui Santos <rsantos@grupopie.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+)
2005-09-08[PATCH] USB ftdi_sio: New IDs for ELV, Xsens and Falcom productsIan Abbott
This patch for the ftdi_sio driver adds a bunch of new devices and fixes an incorrect PID: o Fix PID for ELV UO100 (the PID was in fact for ELV UR100). o Add PID ELV UR100 (see above) and ELV ALC 8500 Expert. o Add a whole bunch of other PIDs for ELV USB devices, commented out for now as they may be used by other drivers eventually. (Christian Abt of ELV.de submitted a full list of devices including an indication of which set of drivers are used by default in the MS Windows world. We decided to comment out the devices that use FTDI's D2XX Windows drivers by default.) o Add PIDs for eight devices from Xsens Technologies BV (submitted in a patch against 2.6.12.2 by Patrick Riphagen). o Add PID for Falcom Samba GPRS modem (submitted by Sebastian Schubert). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-29[PATCH] USB: ftdi_sio: new microHAM and Evolution Robotics devicesIan Abbott
The attached patch adds the following new devices to the ftdi_sio driver: * microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL). * Evolution Robotics ER1 Control Module submitted by Shawn M. Lavelle. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] USB: ftdi_sio: new PID for ELV UM100Ian Abbott
ftdi_sio: Add PID for "ELV USB Module UM100". PID sent by Armin Laugher. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB: Spelling fixes for drivers/usb.Steven Cole
Here are some spelling corrections for drivers/usb. cancelation -> cancellation succesful -> successful cancelation -> cancellation decriptor -> descriptor Initalize -> Initialize wierd -> weird Protocoll -> Protocol occured -> occurred successfull -> successful Procesing -> Processing devide -> divide Isochronuous -> Isochronous noticable -> noticeable Basicly -> Basically transfering -> transferring intialize -> initialize Incomming -> Incoming additionnal -> additional asume -> assume Unfortunatly -> Unfortunately retreive -> retrieve tranceiver -> transceiver Compatiblity -> Compatibility Incorprated -> Incorporated existance -> existence Ununsual -> Unusual Signed-off-by: Steven Cole <elenstev@mesatop.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB: ftdi_sio redundant macro removalIan Abbott
[ftdi_sio] Replaced redundant INTERFACE_A and INTERFACE_B macros with the equivalent PIT_SIOA and PIT_SIOB macros. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] USB: VID/PID updates for ftdi_sio driverIan Abbott
Some VID/PID updates for the ftdi_sio driver: * The "Gude Analog- und Digitalsysteme GmbH" entries were missing from the "combined" table. * Replaced FTDI_8U232AM_ALT_ALT_PID with 3 PIDs for devices from 4n-galaxy.de. * Removed redundant FTDI_RM_VID and renamed FTDI_RMCANVIEW_PID to FTDI_RM_CANVIEW_PID. * Added VID/PID for serial converter in Mobility Electronics EasiDock USB 200 (mentioned by Gregory Schmitt). * Added PID for Active Robots USB comms board (mentioned by John Koch). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 10:40:00 +0000