summaryrefslogtreecommitdiff
path: root/drivers/usb/phy
AgeCommit message (Collapse)Author
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'usb-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...
2013-01-29usb: phy: fix Kconfig warningFelipe Balbi
Recent commits introduced the following Kconfig warning: warning: (USB_MUSB_HDRC && OMAP_USB3) selects \ OMAP_CONTROL_USB which has unmet direct \ dependencies (USB_SUPPORT && ARCH_OMAP2PLUS) This patch just fixes it, by removing the unnecessary OMAP dependency. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-28usb: host: tegra: make use of PHY pointer of HCDVenu Byravarasu
As pointer to PHY structure can be stored in struct usb_hcd making use of it, to call Tegra PHY APIs. Call to usb_phy_shutdown() is moved up in tegra_ehci_remove(), so that to avoid dereferencing of hcd after its freed up. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28usb: add APIs to access host registers from Tegra PHYVenu Byravarasu
As Tegra PHY driver needs to access one of the host registers, added few APIs. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> [swarren: moved assignment of phy->is_ulpi_phy to previous patch.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28USB: PHY: tegra: Get rid of instance number to differentiate PHY typeVenu Byravarasu
Tegra20 USB has 3 PHY instances: Instance 1 and 3 are UTMI. Instance 2 is ULPI. As instance number was used to differentiate ULPI from UTMI, used DT param to get this info and processed accordingly. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Acked-by: Felipe Balbi <balbi@ti.com> [swarren: moved assignment of phy->is_ulpi_phy into this patch out of next patch.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28USB: PHY: tegra: get rid of instance number to differentiate legacy controllerVenu Byravarasu
Tegra20 USB has 3 PHY instances. Instance 0 is based on legacy PHY interface and other two are standard interfaces. As instance number was used to differentiate legacy from standard interfaces, used DT param to get this info and processed accordingly. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28usb: phy: remove unused APIs from Tegra PHY.Venu Byravarasu
As tegra_usb_phy_clk_disable/enable() are not being used, removing them. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28usb: phy: use kzalloc to allocate struct tegra_usb_phyVenu Byravarasu
Use kzalloc instead of kmalloc to allocate struct tegra_usb_phy. This ensures that all function pointers in member u_phy are initialized to NULL. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-25usb: phy: omap-usb2: enable 960Mhz clock for omap5Kishon Vijay Abraham I
"usb_otg_ss_refclk960m" is needed for usb2 phy present in omap5. For omap4, the clk_get of this clock will fail since it does not have this clock. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25usb: musb: omap: make use of the new PHY lib APIsKishon Vijay Abraham I
New PHY lib APIs like usb_add_phy_dev() and devm_usb_get_phy_dev() are used in MUSB (OMAP), in order to make use of the binding information provided in the board file (of OMAP platforms). All the platforms should be modified similar to this to add and get the PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25usb: phy: add a new driver for usb3 phyKishon Vijay Abraham I
Added a driver for usb3 phy that handles the interaction between usb phy device and dwc3 controller. This also includes device tree support for usb3 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25usb: start using the control module driverKishon Vijay Abraham I
Start using the control module driver for powering on the PHY and for writing to the mailbox instead of writing to the control module registers on their own. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25usb: phy: add a new driver for usb part of control moduleKishon Vijay Abraham I
Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23usb: phy: samsung: Remove __devinit, __devexit_p and __exit annotationsVivek Gautam
Dropping __devinit, __devexit_p, __exit annotations since they are nop and no longer supported. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-23usb: phy: samsung: Add host phy support to samsung-phy driverVivek Gautam
This patch adds host phy support to samsung-usbphy driver and further adds support for samsung's exynos5250 usb-phy. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-22usb: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18usb: phy: samsung: Add support to set pmu isolationVivek Gautam
Adding support to parse device node data in order to get required properties to set pmu isolation for usb-phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: phy: samsung: Introducing usb phy driver for hsotgPraveen Paneri
This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-16ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren
These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-21usb: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01usb: phy: add R-Car USB phy driverKuninori Morimoto
This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: phy: tegra remove include of <mach/iomap.h>Stephen Warren
Almost nothing from this file is used, and the file will hopefully be deleted soon. Copy the tiny portions that are used directly into tegra_usb_phy.c. I believe that Venu Byravarasu is working on cleaning up our USB driver, and those cleanups will remove the need for these constants. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-14ARM: tegra: remove useless includes of <mach/*.h>Stephen Warren
Nothing from these files is needed, so remove the includes. This helps single zImage work by reducing use of the mach-tegra/include/mach/ directory. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-06usb: phy: add a new driver for omap usb2 phyKishon Vijay Abraham I
All phy related programming like enabling/disabling the clocks, powering on/off the phy is taken care of by this driver. It is also used for OTG related functionality like srp. This also includes device tree support for usb2 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-05usb: move phy driver from mach-tegra to drivers/usbVenu Byravarasu
As part of this patch: 1. Moved existing tegra phy driver to drivers/USB directory. 2. Added standard USB phy driver APIs to tegra phy driver. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20usb: phy: isp1301: Remove unused static array and defineRoland Stigge
This patch removes an unused statically defined array and an associated #define. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: phy: mv_u3d: Add usb phy driver for mv_u3dYu Xu
The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-26usb: phy: Fix Kconfig dependency for Phy driversAlexandre Pereira da Silva
USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: Add driver for NXP ISP1301 USB transceiverRoland Stigge
This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>