summaryrefslogtreecommitdiff
path: root/drivers/usb/otg
AgeCommit message (Collapse)Author
2011-05-27USB: TWL6025 allow different regulator nameGraeme Gregory
The twl6025 uses a different regulator for USB than the 6030 so select the correct regulator name depending on the subclass of device. Since V1 Use features passed via platform data instead of global variable. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-17USB: OTG: msm: Free VCCCX regulator even if we can't set the voltageMark Brown
If for some reason we fail to set the voltage range for the VDDCX regulator when removing it's better to still disable and free the regulator as that avoids leaking a reference to it and is likely to ensure that it's turned off completely. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-17USB: OTG: msm: Allow the widest possible range for VDDCX when removingMark Brown
When not active the hardware should be able to tolerate voltages within the normal operating range so when removing set the maximum voltage we can use to the maximum rather than minimum of the operating range. This will improve interoperability in case we end up sharing the supply in some design. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-13usb: otg: TWL6030: OMAP4430: Adding SRP VBUS pulsing APIHema HK
Implement the start_srp API to generate the VBUS pulsing and assign it to otg_transciever function pointer. This will be used by the link driver when there is SRP initiation from user. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-06USB: OTG: msm: Add PHY suspend support for MSM8960Pavankumar Kondeti
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: Configure PHY Analog and Digital voltage domainsAnji jonnala
Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: Implement charger detectionPavankumar Kondeti
Implement good battery algorithm defined in the battery charging V1.2 spec for detecting different charging ports. USB hardware is put into low power mode when connected to a dedicated charging port. vbus_draw and set_power methods are implemented for determining the allowed current from Host in different states (un-configured/suspend/configured). The charger block is implemented using vendor specific registers and the PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60 and MSM7x30(45nm PHY). The PHY vendor and product id registers are not implemented in the above chipsets. Hence PHY type is passed via platform data. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06USB: OTG: msm: vote for dayatona fabric clockAnji jonnala
HSUSB core clock is derived from daytona fabric clock and for HSUSB operational require minimum core clock at 55MHz. Since, HSUSB cannot tolerate daytona fabric clock change in the middle of HSUSB operational, vote for maximum Daytona fabric clock while usb is operational Signed-off-by: Anji jonnala <anjir@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03USB: OTG: msm: Clear in_lpm flag before enabling the IRQ in resumePavankumar Kondeti
The current code is clearing in_lpm flag after enabling the IRQ. If IRQ comes immediately before in_lpm flag is set, it thinks that hardware is in low power mode and disables the IRQ. Fix this by clearing in_lpm flag before enabling the IRQ. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03USB: gpio-vbus: ask for vbus_draw regulator before registering xceivDmitry Eremin-Solenikov
Ask for vbus_draw regulator before registering tranceiver to disallow possible race between registration and set_power/etc. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02USB: add Freescale USB OTG Transceiver driverLi Yang
Slightly reworked and cleaned up driver from Freescale LTIB for MPC5121E. The driver has been ported to the current kernel, proc interface "/proc/driver/fsl_usb2_otg" has been replaced by sysfs interface. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02usb: factor out state_string() on otg driversAnatolij Gustschin
Provide common otg_state_string() and use it in drivers. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: twl4030-usb: Report correct vbus value for accessory charger adapters1Matthias Kaehlcke
The twl4030-usb driver exports the status of VBUS as sysfs attribute. In case an accessory charger adapter (ACA) is connected to the OTG transceiver the attribute is always 'off', even when the charger provides VBUS. Added a variable to keep track of the status of VBUS and report it correctly Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@tomtom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13usb/otg: fix twl6030 macroRandy Dunlap
Fix warning caused by stray semi-colon at end of macro: drivers/usb/otg/twl6030-usb.c:183: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Hema HK <hemahk@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-11usb: otg: Add ulpi viewport access opsBenoit Goby
Add generic access ops for controllers with a ulpi viewport register (e.g. Chipidea/ARC based controllers). Signed-off-by: Benoit Goby <benoit@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09USB OTG Langwell: use simple IPC command to control VBus power.Hao Wu
Direct access to PMIC register is not safe and will impact battery charging. New IPC command supported in SCU FW for VBus power control. USB OTG driver will switch to such commands instead of direct access to PMIC register for safety and SCU FW will handle the actual work after got the request(IPC command). Due to this change, usb driver should wait more time for sync OTGSC with USBCFG by SCU. Update wait time from 2ms to 5ms. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07USB: Rename "msm72k_otg.c" to "msm_otg.c"Pavankumar Kondeti
This driver is used across all MSM SoCs. Hence give a generic name. All Functions and strutures are also using "msm_otg" as prefix. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-01usb: otg: TWL4030: Update the last_event variable.Hema HK
Update the last_event variable of otg_transceiver. This will be used in the musb platform glue driver for runtime idling the device. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18usb: otg: notifier: switch to atomic notifierFelipe Balbi
most of our notifications, will be called from IRQ context, so an atomic notifier suits the job better. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18usb: otg: TWL6030 Save the last event in otg_transceiverHema HK
Save the last event in the otg_transceiver so that it can used in the musb driver and gadget driver to configure the musb and enable the vbus for host mode and OTG mode, if the device is connected during boot. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-18usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.Hema HK
Introduce the twl6030_phy_suspend function and assign to otg.set_suspend function pointer. This function is used by the musb-omap2430 platform driver during suspend/resume. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: otg: Remove one unnecessary I2C read request.Hema HK
To get the ID status there was an I2C read transfer. Removed this I2C read transfer as this info can be used from existing variable(linkstat). Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: otg: enable regulator only on cable/device connectHema HK
Remove the regulator enable while driver loading and enable it only when the cable/device is connected and disable it when disconnected. Remove the configuration of config_state and config_trans register configuration as these registers are programmed when regulator enable/disable is called. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17USB: OTG: msm: Fix bug in msm_otg_mode_writePavankumar Kondeti
The driver private data is retrieved incorrectly which results a crash when written into "mode" debugfs file. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17USB: OTG: msm: Fix compiler warning with CONFIG_PM disabledPavankumar Kondeti
This patch fixes the below compiler warning drivers/usb/otg/msm72k_otg.c:257: warning: 'msm_otg_suspend' defined but not used Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-16Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren
'devel-ti816x' into omap-for-linus
2011-02-09wip: fix section mismatches in omap1_defconfigUwe Kleine-König
after these changes omap1_defconfig and omap2plus_defconfig don't have any section mismatches any more, making it plausible that the patches earlier in this series are OK. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-04USB: Fix trout build failure with ci13xxx_msm gadgetPavankumar Kondeti
This patch fixes the below compilation errors. CC drivers/usb/gadget/ci13xxx_msm.o CC net/mac80211/led.o drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event': drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function) drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.) drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function) make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1 make[3]: *** [drivers/usb/gadget] Error 2 MSM USB driver is not supported on boards like trout (MSM7201) which has an external PHY. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22usb: otg: nop: fix oops triggered by otg_register_notifierMing Lei
This patch adds BLOCKING_INIT_NOTIFIER_HEAD in nop_usb_xceiv_probe, so that we can avoid oops caused by uninitialized nop->otg.notifier.rwsem which will be touched in otg_register_notifier path. Reported-by: Gupta, Ajay Kumar <ajay.gupta@ti.com> Tested-by: Gupta, Ajay Kumar <ajay.gupta@ti.com> Cc: Balbi, Felipe <balbi@ti.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22usb: otg: Make USB3319 ULPI ID genericFabio Estevam
On a system with a USB3317 ULPI transceiver the following message is shown on kernel boot: ULPI transceiver vendor/product ID 0x0424/0x0006 Found SMSC USB3319 ULPI transceiver. ULPI integrity check: passed. The reason is that USB3317 has the same vendor/product ID as USB3319. Make the ULPI ID generic for the USB331x transceivers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2010-12-24usb: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is being deprecated. Directly flush or cancel work items instead. * u_ether, isp1301_omap, speedtch conversions are straight-forward. * ochi-hcd should only flush when quirk_nec() is true as otherwise the work wouldn't have been initialized. * In oti6858, cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Duncan Sands <duncan.sands@free.fr> Cc: linux-usb@vger.kernel.org
2010-12-16Merge branch 'usb-next' into musb-mergeGreg Kroah-Hartman
* usb-next: (132 commits) USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added usb: gadget: f_ncm.c added usb: gadget: u_ether: prepare for NCM usb: pch_udc: Fix setup transfers with data out usb: pch_udc: Fix compile error, warnings and checkpatch warnings usb: add ab8500 usb transceiver driver USB: gadget: Implement runtime PM for MSM bus glue driver USB: gadget: Implement runtime PM for ci13xxx gadget USB: gadget: Add USB controller driver for MSM SoC USB: gadget: Introduce ci13xxx_udc_driver struct USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc USB: gadget: Separate out PCI bus code from ci13xxx_udc ...
2010-12-15Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musbGreg Kroah-Hartman
* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits) usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource arm: OMAP4430: musb: Configure musb to OTG mode usb: musb: Adding musb support for OMAP4430 usb: otg: TWL6030: Add twl6030_usb file for compilation mfd: TWL6030: OMAP4: Registering the TWL6030-usb device usb: musb: TWL6030: Selecting TWL6030_USB transceiver usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver. usb: otg: Adding twl6030-usb transceiver driver for OMAP4430 mfd: TWL6030: USBOTG VBUS event generation on usb: musb: add support for ux500 platform musb: am35x: fix compile error due to control apis arm: omap4: enable usb on 4430sdp usb: musb: drop board_set_vbus usb: musb: drop musb_platform_suspend/resume usb: musb: blackfin: usb dev_pm_ops structure usb: musb: am35x: usb dev_pm_ops structure usb: musb: omap2430: use dev_pm_ops structure usb: musb: omap2430: drop the nops usb: musb: mark musb_save/restore_context static ...
2010-12-10usb: add ab8500 usb transceiver driverMian Yousaf Kaukab
Basic driver for ab8500 usb otg transceiver TODO: -Regulators support -Host and OTG testing -Interface with PRCMU -Charging support Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10USB: OTG: msm: Add support for power managementPavankumar Kondeti
Implement runtime and system pm ops to put hardware into low power mode (LPM). As part of LPM, USB clocks are turned off, PHY is put into suspend state and PHY comparators are turned off if VBUS/Id notifications are not required from PHY. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10USB: Add MSM OTG Controller driverPavankumar Kondeti
This driver implements PHY initialization, clock management, ULPI IO ops and simple OTG state machine to kick host/peripheral based on Id/VBUS line status. VBUS/Id lines are tied to a reference voltage on some boards. Hence provide debugfs interface to select host/peripheral mode. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10usb: otg: TWL6030: Add twl6030_usb file for compilationHema HK
Add the twl6030_usb transceiver file for compilation. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.Hema HK
Added the TWL6030-usb transceiver option in the Kconfig Signed-off-by: Hema HK <hemahk@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: otg: Adding twl6030-usb transceiver driver for OMAP4430Hema HK
Adding the twl6030-usb transceiver support for OMAP4 musb driver. OMAP4 supports 2 types of transceiver interface. 1. UTMI: The PHY is embedded within OMAP4. The transceiver functionality is split between the twl6030 PMIC chip and OMAP4430. The VBUS, ID pin sensing and OTG SRP generation part is integrated in TWL6030 and UTMI PHY functionality is embedded within the OMAP4430. There is no direct interactions between the MUSB controller and TWL6030 chip to communicate the session-valid, session-end and ID-GND events. It has to be done through a software by setting/resetting bits in one of the control module register of OMAP4430 which in turn toggles the appropriate signals to MUSB controller. The internal transceiver has functional clocks and powerdown bits to powerdown the PHY for power saving. Since there is no option available for having 2 transceiver drivers for one USB controller, internal PHY specific APIs are passed through plaform_data function pointers to use in the twl6030-usb transceiver driver. 2. ULPI interface is provided for off-chip transceivers. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-30usb: otg: twl4030-usb: Fix unbalanced regulator disables at module removalJarkko Nikula
Function twl4030_usb_remove can cause unbalanced regulator disables in twl4030_phy_power if the cable is not connected. Regulator enable/disable calls are in balance only if the twl4030_phy_resume was called prior the twl4030_usb_remove, that is, the cable was connected. Fix this by checking the 'asleep' variable in twl4030_usb_remove since that variable is used to check state in other functions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15USB: OTG: langwell_otg: fix up some sysfs attribute permissionsGreg Kroah-Hartman
They should not be writable by any user. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Hao Wu <hao.wu@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Alek Du <alek.du@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-29usb: otg: twl4030-usb: switch over to defines in twl.hFelipe Balbi
use the new definitions on twl header for code consistency. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-22USB: otg/ulpi: extend id's table.Igor Grinberg
Extend id's table to have ulpi phy names in it. Report if the known phy is found. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB: otg/ulpi: improve ulpi phy detection.Igor Grinberg
Improve ulpi phy detection by utilizing the "scratch" register. Allow unknown ulpi phy work without the need to hard-code the id. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: makefile cleanupmatt mooney
For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22USB OTG Langwell: Update OTG Kconfig and driver version.Hao Wu
This patch updated Kconfig for langwell otg transceiver driver. Add ipc driver(INTEL_SCU_IPC) as a dependency. Driver version is updated too. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: Add Intel Langwell USB OTG Transceiver DriverHao Wu
This adds support for the USB transceiver driver in the Langwell chipset used on the Intel MID platforms. It folds up the original patch set which includes basic support for the device, PHY low power mode (Please notice that there is a limitation, after we drive VBus down, 2ms delay is required from SCU FW to sync up OTGSC register with USBCFG register), software timers (the hardware timers do not work in low power mode), HNP, SRP. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:47:46 +0000