summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
AgeCommit message (Collapse)Author
2012-10-09Merge tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa patchset from Chris Zankel: "The Xtensa tree has been broken for some time now, and this patchset brings it back to life. It has been part of the linux-next tree for some time. Most changes are inside the xtensa subdirectory; the other changes mostly add another rule to already existing #ifdefs to exclude Xtensa, where required. The only 'common' change is to add two more sections ('.xt.prop' and '.xt.lit') to the white list in modpost." * tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linux: (27 commits) xtensa: Setup CROSS_COMPILE at the top xtensa: drop CONFIG_EMBEDDED_RAMDISK xtensa: fix TIOCGSERIAL and TIOCSSERIAL definitions xtensa: provide dummy gcc intrinsics xtensa: add missing symbol exports parport: disable for xtensa arch xtensa: rename MISC SR definition to avoid name clashes hisax: disable build for big-endian xtensa xtensa: fix CODA build xtensa: fix parallel make xtensa: ISS: drop unused io.c xtensa: ISS: exit simulator in case of halt or poweroff xtensa: ISS: change keyboard polling rate xtensa: ISS: add platform_pcibios_init xtensa: ISS: add dummy serial.h for ISS platform xtensa: change default platform clock frequency to 10MHz xtensa: add ARCH_WANT_OPTIONAL_GPIOLIB to xtensa config xtensa: set NO_IOPORT to 'n' by default xtensa: adopt generic io routines xtensa: fix ioremap ...
2012-10-03xtensa: adopt generic io routinesMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20Merge tag 'omap-cleanup-local-headers-for-v3.7' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: This branch contains mostly scripted changes to make omap header files local where possible to get us closer to supporting the ARM single zImage. After these changes mach includes are pretty much out of the way for omap2+, but still lots of manual work remains to sort through the remaining plat includes. * tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local ARM: OMAP2+: Make ctrl_module_core_44xx.h local ARM: OMAP2+: Make board-rx51.h local ...
2012-09-20ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren
We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-16Merge 3.6-rc6 into usb-nextGreg Kroah-Hartman
This resolves the merge problems with: drivers/usb/dwc3/gadget.c drivers/usb/musb/tusb6010.c that had been seen in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14ARM: nomadik: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the nomadik include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andreas Westin <andreas.westin@stericsson.com>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-09-11Merge tag 'musb-for-v3.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: musb: patches for v3.7 merge window Here we have a bunch of miscellaneous cleanups and fixes to the musb driver. It fixes a bunch of mistakes errors which nobody has triggered before, so I'm not Ccing stable tree. We are finally improving OMAP's VBUS/ID Mailbox usage so that we can introduce our PHY drivers properly. Also, we're adding support for multiple instances of the MUSB IP in the same SoC, as seen on some platforms from TI which have 2 MUSB instances. Other than that, we have some small fixes like not kicking DMA for a zero byte transfer, or properly handling NAK timeout on MUSB's host side, and the enabling of DMA Mode1 for any transfers which are aligned to wMaxPacketSize. All patches have been pending on mailing list for a long time and I don't expect any big surprises with this pull request.
2012-09-11Merge tag 'xceiv-for-v3.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: xceiv: patches for v3.7 merge window nop xceiv got its own header to avoid polluting otg.h. It has also learned to work as USB2 and USB3 phys so we can use it on USB3 controllers. Together with those two changes to nop xceiv, we're adding basic PHY support to dwc3 driver, this is to allow platforms which actually have a SW-controllable PHY talk to them through dwc3 driver. We're adding a new phy driver for the OMAP architecture. This driver is for the PHY found in OMAP4 SoCs, and a new phy driver for the marvell architecture. An extra phy driver - for Tegra SoCs - is now moving from arch/arm/mach-tegra* to drivers/usb/phy. Also here, there's the creation of <linux/usb/phy.h> which should be used from now on for PHY drivers, even those which don't support OTG.
2012-09-11Merge tag 'gadget-for-v3.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: gadget: patches for v3.7 merge window This pull request is large but the biggest part is the first part of the cleanup on the gadget framework so we have a saner setup to add configfs support for v3.8. We have also some more conversions to the new udc_start/udc_stop which makes us closer from dropping the old interfaces. USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED are finally gone, thanks to Michal for his awesome work. Other than that, we have the usual set of miscellaneous changes and cleanups involving improvements to debug messages, removal of duplicated includes, moving dereference after NULL test, making renesas_hsbhs' irq handler Shared, unused code being dropped, prevention of sleep-inside-spinlock bugs and a race condition fix on udc-core.
2012-09-11usb: musb: dsps: remove explicit NOP device creationAjay Kumar Gupta
As NOP device node is now added in am33xx tree so remove the call which creates the NOP platform_device. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: dsps: add dt supportAjay Kumar Gupta
Added device tree support for dsps musb glue driver and updated the Documentation with device tree binding information. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> [afzal@ti.com: use '-' instead of '_' for dt properties] Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: am335x: add support for dual instanceB, Ravi
AM335x and TI81xx platform has dual musb controller so updating the musb_dspc.c to support the same. Changes: - Moved otg_workaround timer to glue structure - Moved static local variable last_timer to glue structure - PHY on/off related cleanups Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> [afzal@ti.com: remove control module related modifications] Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: kill global and static for multi instanceAjay Kumar Gupta
Moved global variable "musb_debugfs_root" and static variable "old_state" to 'struct musb' to help support multi instance of musb controller as present on AM335x platform. Also removed the global variable "orig_dma_mask" and filled the dev->dma_mask with parent device's dma_mask. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: add musb_ida for multi instance supportB, Ravi
Added musb_ida in musb_core.c to manage the multi core ids. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: omap: Add device tree support for omap musb glueKishon Vijay Abraham I
Added device tree support for omap musb driver and updated the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: omap: write directly to mailbox instead of using phyKishon Vijay Abraham I
The glue layer should directly write to mailbox register (present in control module) instead of calling phy layer to write to mailbox register. Writing to mailbox register notifies the core of events like device connect/disconnect. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: musbhsdma: fix IRQ checkSergei Shtylyov
dma_controller_create() in this MUSB DMA driver only regards 0 as a wrong IRQ number, despite platform_get_irq_byname() that it calls returns -ENXIO in that case. It leads to calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! and the DMA controller is not created. Fix this function to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: tusb6010: fix error path in tusb_probe()Sergei Shtylyov
On platform_device_add() failure, the TUSB6010 glue layer forgets to call platform_device_put() -- probably due to a typo... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06usb: musb: host: fix for musb_start_urb Oopsyuzheng ma
when using musb_urb_enqueue to submit three urbs to the same endpoint, when hep->hcpriv is NULL, qh will be allocated when the first urb is completed. When the IRQ completes the next two urbs, qh->hep->hcpriv will be set to NULL. Now the second urb get musb->lock and executes musb_schedule(), but next_urb(qh) is NULL, so musb_start_urb will Oops. [ balbi@ti.com : practically rewrote commit log so it makes sense ] Signed-off-by: mayuzheng <myz147@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: musb: core: fix kernel-doc of musb_init_controller()Sergei Shtylyov
Some parameter names in this function's kernel-doc don't match the real parameters. While at it, give the 'nIrq' parameter slightly more verbose description. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-31usb: gadget: get rid of USB_GADGET_{DUAL,SUPER}SPEEDMichal Nazarewicz
This commit removes USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED Kconfig options. Since now kernel allows many UDC drivers to be compiled, those options may turn to no longer be valid. For instance, if someone decides to build UDC that supports super speed and UDC that supports high speed only, the latter will be "assumed" to support super speed since USB_GADGET_SUPERSPEED will be selected by the former. The test of whether CONFIG_USB_GADGET_*SPEED was defined was just an optimisation which removed otherwise dead code (ie. if UDC is not dual speed, there is no need to handle cases that can happen if speed is high). This commit removes those checks. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20usb: musb: fix spelling of families in KconfigPeter Meerwald
Trivial patch fixin spelling of families in Kconfig [ balbi@ti.com : added the obvious commit log ] Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20usb: musb: omap2430.c delete unused variable.Matthias Brugger
Variable ret is always evaluated as true, so we don't need to check it. Signed-off-by: Matthias Brugger <mbrugger@iseebcn.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-14usb: musb: omap2430: don't loop indefinitely in interrupt.NeilBrown
When called during resume_irqs, omap2430_musb_set_vbus() is run with interrupts disabled, In that case 'jiffies' never changes so the loop can loop forever. So impose a maximum loop count and add an 'mdelay' to ensure we wait a reasonable amount of time for bit to be cleared. This fixes a hang on resume. Signed-of-by: NeilBrown <neilb@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: Make dma_controller_create __devinitShubhrajyoti D
dma_controller_create is called only from musb_init_controller which is __devint so annotate dma_controller_create also with __devint. fixes the warn WARNING: vmlinux.o(.devinit.text+0x6fa8): Section mismatch in reference from the function musb_init_controller() to the function .init.text:dma_controller_create() The function __devinit musb_init_controller() references a function __init dma_controller_create(). If dma_controller_create is only used by musb_init_controller then annotate dma_controller_create with a matching annotation. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: Prevent the masking of the return valueShubhrajyoti D
Currently the errors returned by fifo_setup get masked by EINVAL, propagate the same to the caller. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: Remove redundant if statementRoger Quadros
Remove unnecessary if condition. No change in logic. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: drop is_host_capable() and is_peripheral_capable()Felipe Balbi
those two were defined to 1 anyway, quite useless. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: drop useless board_mode usageFelipe Balbi
we are compiling the driver always with full OTG capabilities, so that board_mode trick becomes useless. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07usb: musb: use DMA mode 1 whenever possibleRoger Quadros
Do not rely on any hints from gadget drivers and use DMA mode 1 whenever we expect data of at least the endpoint's packet size and have not yet received a short packet. The last packet if short is always transferred using DMA mode 0. This patch fixes USB throughput issues in mass storage mode for host to device transfers. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07usb: musb: host: Handle highmem in PIO modeVirupax Sadashivpetimath
In case of USB bulk transfer, when himem page is received, the usb_sg_init function sets the urb transfer buffer to NULL. When such URB transfer is handled, kernel crashes in PIO mode. Handle this by mapping the highmem buffer in PIO mode. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07usb: musb: Fix bad call to kfree() in musb_freeBrian Downing
Commit 622859634a663c5e55d0e2a2cdbb55ac058d97b3 (usb: musb: drop a gigantic amount of ifdeferry) included this change: @@ -1901,11 +1844,7 @@ static void musb_free(struct musb *musb) dma_controller_destroy(c); } -#ifdef CONFIG_USB_MUSB_HDRC_HCD - usb_put_hcd(musb_to_hcd(musb)); -#else kfree(musb); -#endif } /* Since musb comes from struct usb_hcd's hcd_priv, which is allocated on the end of that struct, kfree'ing it is not going to work. Replace kfree(musb) with usb_put_hcd(musb_to_hcd(musb)), which appears to be the right thing to do here. Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07usb: musb: fix sparse warningsFelipe Balbi
The following warnings are fixed: drivers/usb/musb/musb_core.c:357:6: warning: symbol 'musb_otg_timer_func' was not declared. Should it be static? drivers/usb/musb/musb_core.c:1339:27: warning: incorrect type in initializer (different address spaces) drivers/usb/musb/musb_core.c:1339:27: expected void *mbase drivers/usb/musb/musb_core.c:1339:27: got void [noderef] <asn:2>*mregs drivers/usb/musb/musb_core.c:1347:17: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/musb_core.c:1347:17: expected void [noderef] <asn:2>*addr drivers/usb/musb/musb_core.c:1347:17: got void *mbase drivers/usb/musb/musb_core.h:487:27: warning: incorrect type in initializer (different address spaces) drivers/usb/musb/musb_core.h:487:27: expected void *mbase drivers/usb/musb/musb_core.h:487:27: got void [noderef] <asn:2>*mregs drivers/usb/musb/musb_core.h:491:26: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/musb_core.h:491:26: expected void const [noderef] <asn:2>*addr drivers/usb/musb/musb_core.h:491:26: got void *mbase drivers/usb/musb/tusb6010.c:270:48: warning: incorrect type in argument 2 (different address spaces) drivers/usb/musb/tusb6010.c:270:48: expected void [noderef] <asn:2>*buf drivers/usb/musb/tusb6010.c:270:48: got unsigned char [usertype] *[assigned] buf drivers/usb/musb/tusb6010.c:164:32: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/tusb6010.c:164:32: expected void *to drivers/usb/musb/tusb6010.c:164:32: got void [noderef] <asn:2>*buf drivers/usb/musb/tusb6010.c:172:24: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/tusb6010.c:172:24: expected void *to drivers/usb/musb/tusb6010.c:172:24: got void [noderef] <asn:2>*[assigned] buf Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: cleanup while removing musb omap glue driverKishon Vijay Abraham I
No functional change. Just replaced the call to platform_device_del and platform_device_put with platform_device_unregister. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: xceiv: create nop-usb-xceiv.h and avoid pollution on otg.hFelipe Balbi
nop-usb-xceiv was polluting otg.h with its own function prototypes. Move those prototypes to a nop-usb-xceiv.h header. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: NAK timeout scheme on bulk TX endpointAjay Kumar Gupta
Fixes endpoint starvation issue when more than one bulk QH is multiplexed on the reserved bulk TX endpoint. This patch sets the NAK timeout interval for such QHs, and when a timeout triggers the next QH will be scheduled. This scheme doesn't work for devices which are connected to a high to full speed tree (transaction translator) as there is no NAK timeout interrupt from the musb controller from such devices. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: check for zero byte in musb_read/write_fifoAjay Kumar Gupta
Added a check in musb_{read | write}_fifo for zero byte length. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: gadget: don't program dma for zero byte txAjay Kumar Gupta
This is to reduce the overhead of dma programming for zero byte transmit as same can be done using pio mode. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: host: don't program dma for zero byte txAjay Kumar Gupta
This is to reduce the overhead of dma programming for zero byte transmit as same can be done using pio mode. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: gadget: use variables according to their names in rxstate()Sergei Shtylyov
In rxstate(), improper types are given to 'fifo_count' and 'len' variables, and these variables are not used in accordance to their names (up to the certain point), i.e. 'len' to hold the size of a packet in the RX FIFO, and 'fifo_count' to hold a difference between 'request->length' and 'request->actual'... Interchange the variables up to the point where their use starts to make sense again. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: reorder runtime pm callAjay Kumar Gupta
The clock need to be enabled before the musb_core platform device is created and registered. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: am335x: fix pdev resource bugAjay Kumar Gupta
We are overwriting the resource->name to "mc" so that musb_core.c can understand it but this is also changing the platform device's resource->name as the "name" address remains same. Fixing the same by changing the resource->name field of local structure only. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: Fix wrong config for am33xx and ti81xxAjay Kumar Gupta
Commit "bb6abcf: ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX" and "3395955: ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX" has changed the SOC config for AM33XX and TI81XX as shown below CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX CONFIG_SOC_OMAPTI81XX --> CONFIG_SOC_TI81XX So updating the same at musb driver for AM33XX and TI81XX platforms. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-30usb/musb: remove conditional compilation of clk codeViresh Kumar
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. musb also has these dummy macros defined locally. Remove them as they aren't required anymore. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-05Merge tag 'xceiv-for-v3.6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
2012-07-05Merge tag 'musb-for-v3.6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: musb: patches for v3.6 merge window Just two patches here: First we have a fix to disable DMA in case DMA channel request fails. Second, there's a fix for situations where the user kills musb (by rmmod or any other means) while a transfer is on the fly. In such cases, we could be led into a NULL pointer dereference due to endpoint being disabled and endpoint descriptor being NULL.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 17:27:56 +0000