summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
AgeCommit message (Collapse)Author
2020-01-15usb: musb: jz4740: Drop dependency on NOP_USB_XCEIVPaul Cercueil
The driver does not depend directly on the NOP transceiver. It can compile and work just fine without it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-4-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: sunxi: propagate devicetree node to glue pdevMans Rullgard
In order for devicetree nodes to be correctly associated with attached devices, the controller node needs to be propagated to the glue device. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: musb: core: Update the function descriptionSaurav Girepunje
Update the function description of musb_stage0_irq() to remove unused parameter. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> [b-liu@ti.com: revised commit log] Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200115132547.364-2-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-08usb: musb: Disable pullup at initPaul Cercueil
The pullup may be already enabled before the driver is initialized. This happens for instance on JZ4740. It has to be disabled at init time, as we cannot guarantee that a gadget driver will be bound to the UDC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Suggested-by: Bin Liu <b-liu@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200107152625.857-3-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-08usb: musb: fix idling for suspend after disconnect interruptTony Lindgren
When disconnected as USB B-device, suspend interrupt should come before diconnect interrupt, because the DP/DM pins are shorter than the VBUS/GND pins on the USB connectors. But we sometimes get a suspend interrupt after disconnect interrupt. In that case we have devctl set to 99 with VBUS still valid and musb_pm_runtime_check_session() wrongly thinks we have an active session. We have no other interrupts after disconnect coming in this case at least with the omap2430 glue. Let's fix the issue by checking the interrupt status again with delayed work for the devctl 99 case. In the suspend after disconnect case the devctl session bit has cleared by then and musb can idle. For a typical USB B-device connect case we just continue with normal interrupts. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200107152625.857-2-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: musb: dma: Correct parameter passed to IRQ handlerPaul Cercueil
The IRQ handler was passed a pointer to a struct dma_controller, but the argument was then casted to a pointer to a struct musb_dma_controller. Fixes: 427c4f333474 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: musb: jz4740: Silence error if code is -EPROBE_DEFERPaul Cercueil
Avoid printing any error message if the error code is -EPROBE_DEFER. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216162432.1256-1-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21usb: musb: create debugfs directory under usb rootChunfeng Yun
Now the USB gadget subsystem can use the USB debugfs root directory, so move musb's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1574232183-5760-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-14usb: musb: dsps: create debugfs directory under usb rootChunfeng Yun
Now the USB gadget subsystem can use the USB debugfs root directory, so move dsps's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1573541519-28488-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: Spelling s/enpoint/endpoint/Geert Uytterhoeven
Fix misspellings of "endpoint". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Li Yang <leoyang.li@nxp.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20191024152833.30698-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: musb: musb_gadget.c: Remove unused variableSaurav Girepunje
Remove unused variable status from musb_gadget_disable(). Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Link: https://lore.kernel.org/r/20191002143241.GA11615@saurav Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: musb: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190904084427.18532-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-21usb: add a HCD_DMA flag instead of guestimating DMA capabilitiesChristoph Hellwig
The usb core is the only major place in the kernel that checks for a non-NULL device dma_mask to see if a device is DMA capable. This is generally a bad idea, as all major busses always set up a DMA mask, even if the device is not DMA capable - in fact bus layers like PCI can't even know if a device is DMA capable at enumeration time. This leads to lots of workaround in HCD drivers, and also prevented us from setting up a DMA mask for platform devices by default last time we tried. Replace this guess with an explicit HCD_DMA that is set by drivers that appear to have DMA support. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190816062435.881-4-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-08USB: musb: convert platform driver to use dev_groupsGreg Kroah-Hartman
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" any sysfs files. Acked-by: Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20190805193636.25560-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-01usb: musb: remove redundant assignment to variable retColin Ian King
Variable ret is being initialized with a value that is never read and ret is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190731223917.16532-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: dsps: Use dev_get_drvdata()Kefeng Wang
Using dev_get_drvdata directly. Cc: Bin Liu <b-liu@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: jz4740: obtain USB PHY from devicetreePaul Cercueil
Fall back to devm_usb_get_phy() if devicetree is not available. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: jz4740: Let the platform probe the PHYPaul Cercueil
By registering a generic USB PHY from within the driver, we may shadow the USB PHY registered by the platform, which might be different. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30soc: sunxi: Fix missing dependency on REGMAP_MMIOSamuel Holland
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but not REGMAP_MMIO, so the kernel fails to link with an undefined reference to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in drivers/base/regmap/Kconfig. This creates the following dependency loop: drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY instead of depending on it. This matches the use of GENERIC_PHY by all but two other drivers. Cc: <stable@vger.kernel.org> # 4.19 Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: omap2430: Add support for idling phy when musb is idleTony Lindgren
I noticed that musb is blocking core retention for omap4 unlike for omap3. This is because for omap3 we have phy-twl4030-usb implement it's own PM runtime to handle errata "VUSB3V1 VBUS overvoltage debouncer not working when the PHY is powered down". That is done in order to keep the USB PHY powered when phy-twl4030-usb is loaded. For the other USB PHYs, we need to enable and disable the PHY based on musb PM runtime. With the session bit based PM runtime for musb core, we can now idle the USB PHY always when musb is idle. Note that adding these calls will not affect the twl4030 driver as it's phy functions will just query the PHY state without powering the PHY on or off. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30usb: musb: Silence error about blacklisting hubs if !CONFIG_USBPaul Cercueil
Some drivers, like jz4740-musb, don't depend on CONFIG_USB. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13USB: musb: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/usb/musb/musb_host.c: In function ‘musb_advance_schedule’: drivers/usb/musb/musb_host.c:374:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (qh->mux == 1) { ^ drivers/usb/musb/musb_host.c:383:3: note: here case USB_ENDPOINT_XFER_ISOC: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: musb: Kconfig: Drop dependency on CONFIG_USB for jz4740Paul Cercueil
The Kconfig entry previously depended on USB_OTG_BLACKLIST_HUB unconditionally, which is an option that is only available when CONFIG_USB is enabled. However, the USB IP in the JZ4740 SoC does not support host mode, only gadget mode, so it makes sense to allow it to build when CONFIG_USB is not set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740Paul Cercueil
Depending on MACH_JZ4740 prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12usb: musb: jz4740: Add support for devicetreePaul Cercueil
Add support for probing the driver from devicetree. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12USB: musb: fix indentation issue on a return statementColin Ian King
A return statement is indented one level too far, fix this by removing a tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11Merge 5.0-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30usb: gadget: musb: fix short isoc packets with inventra dmaPaul Elder
Handling short packets (length < max packet size) in the Inventra DMA engine in the MUSB driver causes the MUSB DMA controller to hang. An example of a problem that is caused by this problem is when streaming video out of a UVC gadget, only the first video frame is transferred. For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be set manually by the driver. This was previously done in musb_g_tx (musb_gadget.c), but incorrectly (all csr flags were cleared, and only MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem allows some requests to be transferred correctly, but multiple requests were often put together in one USB packet, and caused problems if the packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY in dma_controller_irq (musbhsdma.c), just like host mode transfers. This topic was originally tackled by Nicolas Boichat [0] [1] and is discussed further at [2] as part of his GSoC project [3]. [0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU [1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9 [2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html [3] http://elinux.org/BeagleBoard/GSoC/USBSniffer Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman
There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-18usb: musb: dsps: fix runtime pm for peripheral modeBin Liu
Since the runtime PM support was added in musb, dsps relies on the timer calling otg_timer() to activate the usb subsystem. However the driver doesn't enable the timer for peripheral port, then the peripheral port is unable to be enumerated by a host if the other usb port is disabled or in peripheral mode too. So let's start the timer for peripheral port too. Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-18usb: musb: dsps: fix otg state machineBin Liu
Due to lack of ID pin interrupt event on AM335x devices, the musb dsps driver uses polling to detect usb device attach for dual-role port. But in the case if a micro-A cable adapter is attached without a USB device attached to the cable, the musb state machine gets stuck in a_wait_vrise state waiting for the MUSB_CONNECT interrupt which won't happen due to the usb device is not attached. The state is stuck in a_wait_vrise even after the micro-A cable is detached, which could cause VBUS retention if then the dual-role port is attached to a host port. To fix the problem, make a_wait_vrise as a transient state, then move the state to either a_wait_bcon for host port or a_idle state for dual-role port, if no usb device is attached to the port. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: musb: dsps: do not disable CPPI41 irq in driver teardownBin Liu
TI AM335x CPPI 4.1 module uses a single register bit for CPPI interrupts in both musb controllers. So disabling the CPPI irq in one musb driver breaks the other musb module. Since musb is already disabled before tearing down dma controller in musb_remove(), it is safe to not disable CPPI irq in musb_dma_controller_destroy(). Fixes: 255348289f71 ("usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02USB: musb: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31USB: musb: clean up debugfs file and directory creationGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because of this, lots of init functions do not need to have return values, so this cleans up a lot of unused error handling code that never could have triggered in the past. Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31usb: musb: remove an unused variableArnd Bergmann
After the only users of this variable got removed, we now get a warning about 'otg' being unused: drivers/usb/musb/da8xx.c: In function 'da8xx_musb_interrupt': drivers/usb/musb/da8xx.c:226:19: error: unused variable 'otg' [-Werror=unused-variable] Fixes: d2852f2d3e6d ("usb: musb: remove references to default_a of struct usb_otg") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: gadget: fix to_musb_ep() to not return NULLBin Liu
UDC core ensures the usb_ep parameter passed in is not NULL, so checking if (ep != NULL) is pointless. Convert to_musb_ep() to a simple macro to not directly return NULL to avoid warnings from code static analysis tools. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: gadget: fix to_musb_request() to not return NULLBin Liu
The gadget function drivers should ensure the usb_request parameter passed in is not NULL. UDC core doesn't check if it is NULL, so MUSB driver shouldn't have to check it either. Convert to_musb_request() to a simple macro to not directly return NULL to avoid warnings from code static analysis tools. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22USB: musb: dsps: propagate device-tree nodeJohan Hovold
To be able to use DSPS-based controllers with device-tree descriptions of the USB topology, we need to associate the glue device's device-tree node with the child controller device. Note that this can also be used to eventually let USB core manage generic phys. Also note that the other glue drivers will require similar changes to be able to describe their buses in DT. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: disable otg protocol supportBin Liu
As decided in the discussion [1] we are deleting the otg protocol support from the musb drivers. First this patch disables the flags for enabling the otg protocols. We will later gradually delete the otg protocol code from the musb drivers. [1] https://www.spinics.net/lists/linux-usb/msg167003.html Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove references to default_a of struct usb_otgBin Liu
musb drivers do not use the otg fsm framework, so referencing to otg->default_a doesn't have any effect, so remove the references. But tusb6010 glue driver uses it locally to control the vbus power, so keep the references in tusb6010 only. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: break the huge isr musb_stage0_irq() into small functionsBin Liu
musb_stage0_irq() is 400+ lines long. Break its interrupt events handling into each individual functions to make it easy to read. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove unused members in struct musb_hdrc_configBin Liu
The following members in struct musb_hdrc_config are not used, so remove them. soft_con utm_16 big_endian mult_bulk_tx mult_bulk_rx high_iso_tx high_iso_rx dma dma_channels dyn_fifo_size vendor_ctrl vendor_stat vendor_req dma_req_chan musb_hdrc_eps_bits Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove duplicated port mode enumBin Liu
include/linux/usb/musb.h already defines enum for musb port mode, so remove the duplicate in musb_core.h and use the definition in musb.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: dsps: remove duplicated get_musb_port_mode()Bin Liu
musb_core already has musb_get_mode(), so remove the duplicate from musb_dsps.c. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove duplicated quirks flagBin Liu
Both musb_io and musb_platform_ops in struct musb define a quirks flag for the same purpose. Let's remove the one in struct musb_io, and use that in struct musb_platform_ops instead. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove some register access wrapper functionsBin Liu
The following wrappers were defined because of Blackfin support. Now Blackfin support is removed, these wrappers are no longer needed, so remove them. musb_write_txfifosz musb_write_txfifoadd musb_write_rxfifosz musb_write_rxfifoadd musb_write_ulpi_buscontrol musb_read_txfifosz musb_read_txfifoadd musb_read_rxfifosz musb_read_rxfifoadd musb_read_ulpi_buscontrol musb_read_hwvers Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove adjust_channel_params() callback from musb_platform_opsBin Liu
Now Blackfin support is removed, nobody uses adjust_channel_params() any more, so remove it from struct musb_platform_ops. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: remove readl/writel from struct musb_platform_opsBin Liu
Now Blackfin support is removed, we no longer need function pointers for musb_readl() and musb_writel(). Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-22usb: musb: merge musbhsdma.h into musbhsdma.cBin Liu
Now Blackfin support is removed, header musbhsdma.h is only included in musbhsdma.c. So let's merge the content in musbhsdma.h to musbhsdma.c and delete musbhsdma.h. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-21Merge 4.17-rc6 into usb-nextGreg Kroah-Hartman
We want the bug fixes and this resolves the merge issues with the usbip driver. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 15:52:00 +0000