summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/musb_core.h
AgeCommit message (Collapse)Author
2012-11-01usb: musb: remove hand-crafted id handlingSebastian Andrzej Siewior
This replaced the handcrafted id handling by the PLATFORM_DEVID_AUTO value which should do the same thing. This patch probably also fixes ux500 because I did not find the "musbid" variable to remove. And we close a tiny-unlikely race window becuase the old code gave the id back before device was destroyed in the remove case. [ balbi@ti.com : fixed up two failed hunks when applying patch ] Cc: B, Ravi <ravibabu@ti.com> Cc: Santhapuri, Damodar <damodar.santhapuri@ti.com> Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Cc: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: musb: Perform only write access on MUSB_INTRTXESebastian Andrzej Siewior
This is part of the workaround for AM35x advisory Advisory 1.1.20. The advisory says that the IPSS bridge can't handle 8 & 16 bit read access. An 16bit read access to MUSB_INTRTXE results in an 32bit read access which also reads INTRRX and therefore may lose interrupts. This patch uses a shadow register of MUSB_INTRTXE so we only perform write access to it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: musb: Perform only write access on MUSB_INTRRXESebastian Andrzej Siewior
This is part of the workaround for AM35x advisory Advisory 1.1.20. The advisory says that the IPSS bridge can't handle 8 & 16 bit read access. An 16bit read access to MUSB_INTRRXE results in an 32bit read access which also reads INTRUSB and therefore may lose interrupts. This patch uses a shadow register of MUSB_INTRRXE so we only perform write access to it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: kill global and static for multi instanceAjay Kumar Gupta
Moved global variable "musb_debugfs_root" and static variable "old_state" to 'struct musb' to help support multi instance of musb controller as present on AM335x platform. Also removed the global variable "orig_dma_mask" and filled the dev->dma_mask with parent device's dma_mask. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: add musb_ida for multi instance supportB, Ravi
Added musb_ida in musb_core.c to manage the multi core ids. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: drop is_host_capable() and is_peripheral_capable()Felipe Balbi
those two were defined to 1 anyway, quite useless. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09usb: musb: drop useless board_mode usageFelipe Balbi
we are compiling the driver always with full OTG capabilities, so that board_mode trick becomes useless. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-07usb: musb: fix sparse warningsFelipe Balbi
The following warnings are fixed: drivers/usb/musb/musb_core.c:357:6: warning: symbol 'musb_otg_timer_func' was not declared. Should it be static? drivers/usb/musb/musb_core.c:1339:27: warning: incorrect type in initializer (different address spaces) drivers/usb/musb/musb_core.c:1339:27: expected void *mbase drivers/usb/musb/musb_core.c:1339:27: got void [noderef] <asn:2>*mregs drivers/usb/musb/musb_core.c:1347:17: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/musb_core.c:1347:17: expected void [noderef] <asn:2>*addr drivers/usb/musb/musb_core.c:1347:17: got void *mbase drivers/usb/musb/musb_core.h:487:27: warning: incorrect type in initializer (different address spaces) drivers/usb/musb/musb_core.h:487:27: expected void *mbase drivers/usb/musb/musb_core.h:487:27: got void [noderef] <asn:2>*mregs drivers/usb/musb/musb_core.h:491:26: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/musb_core.h:491:26: expected void const [noderef] <asn:2>*addr drivers/usb/musb/musb_core.h:491:26: got void *mbase drivers/usb/musb/tusb6010.c:270:48: warning: incorrect type in argument 2 (different address spaces) drivers/usb/musb/tusb6010.c:270:48: expected void [noderef] <asn:2>*buf drivers/usb/musb/tusb6010.c:270:48: got unsigned char [usertype] *[assigned] buf drivers/usb/musb/tusb6010.c:164:32: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/tusb6010.c:164:32: expected void *to drivers/usb/musb/tusb6010.c:164:32: got void [noderef] <asn:2>*buf drivers/usb/musb/tusb6010.c:172:24: warning: incorrect type in argument 1 (different address spaces) drivers/usb/musb/tusb6010.c:172:24: expected void *to drivers/usb/musb/tusb6010.c:172:24: got void [noderef] <asn:2>*[assigned] buf Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-30usb/musb: remove conditional compilation of clk codeViresh Kumar
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. musb also has these dummy macros defined locally. Remove them as they aren't required anymore. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-25usb: musb: move work_struct(otg_notifier_work) from core to omap glueKishon Vijay Abraham I
Commit 712d8e(fixes pm_runtime calls while atomic by using a work queue. musb pm_runtime_get_sync call happens in interrupt context on cable attach case. That can result in re-enabling the interrupts and cause side affect. To avoid this deferred processing is used) While the issue and the work queue implementation is specific to omap (omap2430.c), the work_struct is defined as a member of struct musb (musb_core.h). Hence moved the work_struct from musb_core to omap glue. Cc: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-04-18usb: musb: drop __deprecated flagFelipe Balbi
Looks like we cannot live without that double_buffer_not_ok flag due to many HW bugs this MUSB core has. So, let's drop the __deprecated flag to avoid annoying compile warnings. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13usb: otg: Rename otg_transceiver to usb_phyHeikki Krogerus
This is the first step in separating USB transceivers from USB OTG utilities. Includes fixes to IMX code from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: fix pm_runtime calls while atomicVikram Pandita
musb pm_runtime_get_sync call happens in intrrupt context on cable attach case That can result in re-enabling the interrupts and cause side affects. So move the code to a work queue. Following is the error path hit on cable attach: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:802 in_atomic(): 0, irqs_disabled(): 0, pid: 18, name: irq/378-twl6030 Backtrace: [<c00520f0>] (dump_backtrace+0x0/0x110) from [<c054f454>] (dump_stack+0x18/0x1c) [<c054f43c>] (dump_stack+0x0/0x1c) from [<c007f59c>] (__might_sleep+0x130/0x134) [<c007f46c>] (__might_sleep+0x0/0x134) from [<c02c2794>] (__pm_runtime_resume+0x94/0x98) [<c02c2700>] (__pm_runtime_resume+0x0/0x98) from [<c033e7e4>] (musb_otg_notifications+0x9c/0x164) [<c033e748>] (musb_otg_notifications+0x0/0x164) from [<c00b3df0>] (notifier_call_chain+0x4c/0x8c) [<c00b3da4>] (notifier_call_chain+0x0/0x8c) from [<c00b44a8>] (__atomic_notifier_call_chain+0x40/0x54) [<c00b4468>] (__atomic_notifier_call_chain+0x0/0x54) from [<c00b44dc>] (atomic_notifier_call_chain+0x20/0x28) [<c00b44bc>] (atomic_notifier_call_chain+0x0/0x28) from [<c033f124>] (twl6030_usb_irq+0xc8/0xdc) [<c033f05c>] (twl6030_usb_irq+0x0/0xdc) from [<c00d79f8>] (irq_thread_fn+0x24/0x40) [<c00d79d4>] (irq_thread_fn+0x0/0x40) from [<c00d7b64>] (irq_thread+0x150/0x1d8) [<c00d7a14>] (irq_thread+0x0/0x1d8) from [<c00adf70>] (kthread+0x94/0x98) [<c00adedc>] (kthread+0x0/0x98) from [<c0094388>] (do_exit+0x0/0x720) Tested with: MUSB Device mode: Cold boot / Hot plug MUSB Host mode: Cold boot / Hot plug Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: headers cleanupFelipe Balbi
Remove a few unnecessary headers from a few files. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: omap2+: save and restore OTG_INTERFSELHema HK
we need to save and restore OTG_INTERFSEL register else we will be unable to function on resume after OFF mode. Reported-by: Devaraj Rangasamy <dev@ti.com> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010: fix compilationFelipe Balbi
earlier commits have broken compilation of tusb6010 glue layer, fix it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-01usb: musb: drop a gigantic amount of ifdeferryFelipe Balbi
the MUSB IP is always OTG, so there's no point in adding so many ifdefs on the code. Drop those and always compile the driver for OTG support. This also allows us to drop the useless "driver mode" choice. For doing that, we need to make musb depend on both Host and Peripheral side. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: musb: update musb_platform_ops docs to match codeMike Frysinger
The "channel_program" member was renamed to "adjust_channel_params", but the documentation wasn't updated. Reported-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13USB: musb: blackfin: work around anomaly 05000450Mike Frysinger
DMA mode 1 data corruption anomaly on Blackfin systems. This issue is specific to the Blackfin silicon as the bug appears to be related to the connection of the musb ip to the bus/dma fabric. Data corruption when using USB DMA mode 1. (Issue manager 17-01-0105) DMA mode 1 allows large size transfers to generate a single interrupt at the end of the entire transfer. The transfer is split up in packets of length specified in the Maximum Packet Size field for that endpoint. If the transfer size is not an integer multiple of the Maximum Packet Size, a short packet will be present at the end of the transfer. Under certain conditions this packet may be corrupted in the USB FIFO. Workaround: Use DMA mode 1 to transfer (n* Maximum Packet Size) and schedule DMA mode 0 to transfer the short packet. As an example if your transfer size is 33168 bytes and Maximum Packet Size equals 512, schedule [33168 - (33168 mod 512)] in DMA mode 1 and the remainder (33168 mod 512) in DMA mode 0. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-16Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits) USB: Add support for SuperSpeed isoc endpoints xhci: Clean up cycle bit math used during stalls. xhci: Fix cycle bit calculation during stall handling. xhci: Update internal dequeue pointers after stalls. USB: Disable auto-suspend for USB 3.0 hubs. USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol. xhci: Return canceled URBs immediately when host is halted. xhci: Fixes for suspend/resume of shared HCDs. xhci: Fix re-init on power loss after resume. xhci: Make roothub functions deal with device removal. xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports. xhci: Return a USB 3.0 hub descriptor for USB3 roothub. xhci: Register second xHCI roothub. xhci: Change xhci_find_slot_id_by_port() API. xhci: Refactor bus suspend state into a struct. xhci: Index with a port array instead of PORTSC addresses. USB: Set usb_hcd->state and flags for shared roothubs. usb: Make core allocate resources per PCI-device. usb: Store bus type in usb_hcd, not in driver flags. usb: Change usb_hcd->bandwidth_mutex to a pointer. ...
2011-03-02Merge branch 'devel-cleanup' into omap-for-linusTony Lindgren
Conflicts: arch/arm/mach-omap2/timer-gp.c
2011-03-01usb: musb: Remove platform context save/restore APIHema HK
For OMAP3 and OMAP4 for offmode and retention support, musb sysconfig is configured to force idle and standby with ENABLE_FORCE bit of OTG_FORCESTNDBY set. And on wakeup configure to no ilde/standby with resetting the ENABLE_FORCE bit. There is not need to save and restore of this register anymore so removed omap2430_save_context/omap2430_restore_context functions. and also removed otg_forcestandby member of musb_context_registers structure Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: Using runtime pm APIs for musb.Hema HK
Calling runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync() for enabling/disabling the clocks, sysconfig settings. Enable clock, configure no-idle/standby when active and configure force idle/standby and disable clock when idled. This is taken care by the runtime framework when driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs. Need to configure MUSB into force standby and force idle mode when usb not used Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: gadget: do not poke with gadget's list_headFelipe Balbi
struct usb_request's list_head is supposed to be used only by gadget drivers, but musb is abusing that. Give struct musb_request its own list_head and prevent musb from poking into other driver's business. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-17usb: musb: fix build breakageFelipe Balbi
commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled. Fix it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-02-16Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren
'devel-ti816x' into omap-for-linus
2011-02-01usb: musb: disable double buffering when it's brokenFelipe Balbi
We know that blackfin doesn't support double buffering feature as of today. So we add a flag set by musb_platform_init() to forcefully disable that feature. Such flag is created and marked as deprecated to force us to find a solution for the missing double buffering support on blackfin. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-01-27omap: Start using CONFIG_SOC_OMAPTony Lindgren
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2010-12-10usb: musb: Adding musb support for OMAP4430Hema HK
OMAP4430 supports UTMI and ULPI types of transceiver interface. In UTMI mode: The PHY is embedded within OMAP4430. The transceiver functionality is split between the twl6030 PMIC chip and OMAP4430. The VBUS, ID pin sensing and OTG SRP generation part is integrated in TWL6030 and UTMI PHY functionality is embedded within the OMAP4430. There is no direct interactions between the MUSB controller and TWL6030 chip to communicate the session-valid, session-end and ID-GND events. It has to be done through a software by setting/resetting bits in one of the control module register of OMAP4430 which in turn toggles the appropriate signals to MUSB controller. musb driver is register for blocking notifications from the transceiver driver to get the event notifications for connect/disconnect and ID-GND. Based on these events call the transceiver init/shutdown function to configure the transceiver to toggle the VBUS valid, session end and ID_GND signals to musb and power on/off the internal PHY. For ID_GND event notifications, toggle the ID_GND signal and then wait for musb to be configured as "A" device, and then call the transceiver function to set the VBUS. In OTG mode and musb as a host, When the Micro A connector used, VBUS is turned on and session bit set. When the device is connected, enumeration goes through. When the device disconnected from the other end of the connector(ID is still grounded), link will detect the disconnect and end the session. When the device is connected back, there are no events generated in the TWL6030-usb, and link is already down. So the device is not detected. Removed the session bit disable code which will recognize the connect of the device. Limitation: In OTG host mode, if device is connected during boot, it does not get detected. If disconnect and connect it back or connect after boot only it works. Fix for this, I will submit seperate patch later. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: drop board_set_vbusFelipe Balbi
that's not used anymore. So let's drop it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: drop musb_platform_suspend/resumeFelipe Balbi
all glue layers are now fully moved to the new setup. We are now using dev_pm_ops to implement suspend/resume functionality and thus, musb_platform_suspend/resume has become deprecated and useless. This patch drops those function pointers and its uses. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: drop musb_platform_save/restore_contextFelipe Balbi
... that can be easily folded into the musb_platform_suspend/resume calls. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: drop the set_clock magicFelipe Balbi
now that platform glue layer handles clock completely, that function is completely useless for us. Drop it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: move clock handling to glue layerFelipe Balbi
musb core doesn't need to know about platform specific details. So start moving clock handling to platform glue layer and make musb core agnostic about that. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: pass platform_ops via platform_dataFelipe Balbi
... then we don't need to export any symbols from glue layer to musb_core. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: add Kconfig options for each glue layerFelipe Balbi
This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: hold context on musb structureFelipe Balbi
when we start splitting HW glue layer, it's gonna make it easier to re-use that structure. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-07usb: musb: make all glue layer export struct musb_platform_opsFelipe Balbi
preparing to a big refactor on musb code. We need to be able to compile in all glue layers (or at least all ARM-based ones) together and have a working binary. While preparing for that, we move every glue layer to export only one symbol, which is a struct musb_platform_ops, and make all other functions static. Later patches will come to allow for compiling all glue layers together and have a working binary. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-07usb: musb: introduce struct musb_platform_opsFelipe Balbi
This will be passed to musb_core by platform glue layer in order to make it easier to compile support for several HW glue layers. Later patches will come using this structure and also moving HW glue layers to its own platform driver; the idea is to be able to handle platform peculiarities in a manner which doesn't affect one another. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01usb: musb: remove board_data parameter from musb_platform_init()Hema Kalliguddi
Removed the board_data parameter being passed to musb_platform_init function as board_data can be extracted from device structure which is already member of musb structure. Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-10-22USB: musb: add musb support for AM35xAjay Kumar Gupta
AM35x has musb interface and uses CPPI4.1 DMA engine. Current patch supports only PIO mode. DMA support can be added later once basic CPPI4.1 DMA patch is accepted. Also added USB_MUSB_AM35X which is required to differentiate musb ips between OMAP3x and AM35x. This config would be used to for below purposes, - Select am35x.c instead of omap2430.c for compilation at drivers/usb/musb directory. Please note there are significant differneces in these two files as musb ip in quite different on AM35x. Please note that in multi omap configuration only omap2430.c file will get compiled and we would require to select only AM35x based board config to compile am35x.c - Select workaround codes applicable for AM35x musb issues. one such workaround is for bytewise read issue on AM35x. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: musb: introduce DA8xx/OMAP-L1x glue layerSergei Shtylyov
Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Yadviga Grigorieva <yadviga@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30USB: MUSB: make non-OMAP platforms build with CONFIG_PM=ySergei Shtylyov
Attempt to build MUSB driver with CONFIG_PM=y (e.g. in the OTG mode) on DaVinci results in these link errors: drivers/built-in.o: In function `musb_restore_context': led-triggers.c:(.text+0x714d8): undefined reference to `musb_platform_restore_context' drivers/built-in.o: In function `musb_save_context': led-triggers.c:(.text+0x71788): undefined reference to `musb_platform_save_context' This turned out to be caused by commit 9957dd97ec5e98dd334f87ade1d9a0b24d1f86eb (usb: musb: Fix compile error for omaps for musb_hdrc). Revert it, taking into account the rename of CONFIG_ARCH_OMAP34XX into CONFIG_ARCH_OMAP3 (which that commit fixed in a completely inappropriate way) and the recent addition of OMAP4 support. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: MUSB: Add OMAP4 support in MUSB driverMaulik Mankad
This patch adds CONFIG_ARCH_OMAP4 macro within MUSB driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: Set transceiver interface typeMaulik Mankad
Program the OTG_INTERFSEL register based on transcevier type passed from board file. Adapt signature of musb_platform_init() function for davinci, blackfin and tusb6010. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: make hcd.h public (drivers dependency)Eric Lescouet
The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30musb: save and restore missing bus control registerAjay Kumar Gupta
Added the missing BUS_CONTROL register in musb save/restore routines. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19usb: musb: Fix compile error for omaps for musb_hdrcTony Lindgren
CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3. But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header. Otherwise we get the following for most omap3 defconfigs: drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while' Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits) USB: backlight, appledisplay: fix incomplete registration failure handling USB: pl2303: remove unnecessary reset of usb_device in urbs USB: ftdi_sio: remove obsolete check in unthrottle USB: ftdi_sio: remove unused tx_bytes counter USB: qcaux: driver for auxiliary serial ports on Qualcomm devices USB: pl2303: initial TIOCGSERIAL support USB: option: add Longcheer/Longsung vendor ID USB: fix I2C API usage in ohci-pnx4008. USB: usbmon: mask seconds properly in text API USB: sisusbvga: no unnecessary GFP_ATOMIC USB: storage: onetouch: unnecessary GFP_ATOMIC USB: serial: ftdi: add CONTEC vendor and product id USB: remove references to port->port.count from the serial drivers USB: tty: Prune uses of tty_request_room in the USB layer USB: tty: Add a function to insert a string of characters with the same flag USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() USB: tty: kill request_room for USB ACM class USB: tty: sort out the request_room handling for whiteheat USB: storage: fix misplaced parenthesis USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:58:48 +0000