summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3
AgeCommit message (Collapse)Author
2019-11-04Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27usb: mtu3: fix missing include of mtu3_dr.hBen Dooks (Codethink)
The declarations of ssusb_gadget_{init,exit} are in the mtu3_dr.h file but the code does that implements them does not include this. Add the include to fix the following sparse warnigns: drivers/usb/mtu3/mtu3_core.c:825:5: warning: symbol 'ssusb_gadget_init' was not declared. Should it be static? drivers/usb/mtu3/mtu3_core.c:925:6: warning: symbol 'ssusb_gadget_exit' was not declared. Should it be static? Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-10usb: mtu3: fix race condition about delayed_statusChunfeng Yun
usb_composite_setup_continue() may be called before composite_setup() return USB_GADGET_DELAYED_STATUS, then the controller driver will delay status stage after composite_setup() finish, but the class driver don't ask the controller to continue delayed status anymore, this will cause control transfer timeout. happens when use mass storage (also enabled other class driver): cpu1: cpu2 handle_setup(SET_CONFIG) //gadget driver unlock (g->lock) gadget_driver->setup() composite_setup() lock(cdev->lock) set_config() fsg_set_alt() // maybe some times due to many class are enabled raise FSG_STATE_CONFIG_CHANGE return USB_GADGET_DELAYED_STATUS handle_exception() usb_composite_setup_continue() unlock(cdev->lock) lock(cdev->lock) ep0_queue() lock (g->lock) //no delayed status, nothing todo unlock (g->lock) unlock(cdev->lock) return USB_GADGET_DELAYED_STATUS // composite_setup lock (g->lock) get USB_GADGET_DELAYED_STATUS //handle_setup [1] Try to fix the race condition as following: After the driver gets USB_GADGET_DELAYED_STATUS at [1], if we find there is a usb_request in ep0 request list, it means composite already asked us to continue delayed status by usb_composite_setup_continue(), so we skip request about delayed_status by composite_setup() and still do status stage. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1570611900-7112-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10usb: mtu3: add a new function to do status stageChunfeng Yun
Exact a new static function to do status stage Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1570611900-7112-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: mtu3: register a USB Role Switch for dual role modeChunfeng Yun
Because extcon is not allowed for new bindings, and the dual role switch is supported by USB Role Switch, especially for Type-C drivers, so register a USB Role Switch to support the new way Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1567070558-29417-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10Revert "usb: mtu3: fix up undefined reference to usb_debug_root"Chunfeng Yun
It's not needed after [1] is applied, because usb_debug_root is created by usb common core but not usbcore now. [1] 812086d362a1 ("USB: move usb debugfs directory creation to the usb common core") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21usb: mtu3: fix up undefined reference to usb_debug_rootChunfeng Yun
When CONFIG_USB is not set, and CONFIG_USB_GADGET is set, there is an issue: ld: drivers/usb/mtu3/mtu3_debugfs.o: in function 'ssusb_debugfs_create_root': mtu3_debugfs.c:(.text+0xba3): undefined reference to 'usb_debug_root' usb_debug_root is only built when CONFIG_USB is enabled, so here drop it and use NULL instead. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: mtu3: get optional clock by devm_clk_get_optional()Chunfeng Yun
Use devm_clk_get_optional() to get optional clock instead of optional_clk_get() which uses devm_clk_get() to get clock and checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional() does, in fact, only ignoring -ENOENT will cover more errors, so the replacement doesn't change original purpose. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01Merge 5.1-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix EXTCON dependencyArnd Bergmann
When EXTCON is a loadable module, mtu3 fails to link as built-in: drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe': mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle' Add a Kconfig dependency to force mtu3 also to be a loadable module if extconn is, but still allow it to be built without extcon. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add a function to switch mailbox state to stringChunfeng Yun
By introducing mailbox_state_string(), allow to make debug log more readable Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add tracepoints to help debugChunfeng Yun
This patch implements a few initial tracepoints for the mtu3 driver. More traces can be added as necessary in order to ease the task of debugging. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: move vbus and mode debugfs interfaces into mtu3_debugfs.cChunfeng Yun
Due to the separated debugfs files are added, move vbus and mode debugfs interfaces related with dual-role switch from mtu3_dr.c into mtu3_debugfs.c Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add debugfs interface filesChunfeng Yun
This adds more debugfs consumers. The debugfs entries read some important registers, fifo status, QMU ring, endpoint status, and IPPC probe interface to get internal status. With these entries, users can check the registers, endpoint and GPD used during run time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: supports new QMU formatChunfeng Yun
In order to support U3gen2 ISOC transfer upto 96DPs, extend the data buffer length. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU formatChunfeng Yun
To support USB3 Gen2 ISOC, the data buffer length need be extended, it's hard to make the current qmu_gpd struct compatible, so here rebuild qmu_gpd struct and make easy to support new QMU format Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix transfer error of USB3 Gen2 isocChunfeng Yun
To support USB3 Gen2 ISOC, the registers of TXCSR1 and RXCSR1 are adjusted to support greater maxpkt and mult value, this patch fix this issue Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild the code of getting vbus regulatorChunfeng Yun
Remove local variable @vbus and use @dev instead of @pdev->dev Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: remove unnecessary local variable @reqChunfeng Yun
The local variable @req is unnecessary in qmu_tx_zlp_error_handler, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: print useful information also for device and host modesChunfeng Yun
Print useful information not only dual-role mode but also device mode and host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: check return value of devm_extcon_register_notifier()Chunfeng Yun
Check the return value of devm_extcon_register_notifier() and add error handling. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman
There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-07usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handlerYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/mtu3/mtu3_qmu.c: In function 'qmu_tx_zlp_error_handler': drivers/usb/mtu3/mtu3_qmu.c:385:22: warning: variable 'req' set but not used [-Wunused-but-set-variable] It seems dbginfo original intention is print 'req' other than 'mreq' Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS modeChunfeng Yun
When the controller supports SS mode, but works as HS mode, the SOFTCONN will not be cleared automatically when clear USB3_EN by default, this cause an issue that can't disconnect from host, so clear SOFTCONN when clear USB3_EN when the class driver want to disable the D+ pullup. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: enable SETUPENDISR interruptChunfeng Yun
If the controller receives a new SETUP during SETUP data stage, and will generate SETUPENDISR interrupt, the driver should abort the current SETUP command and process the new one. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)Chunfeng Yun
Fix the issue: device doesn't accept LGO_U1/U2: 1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2 by default; 2. enable/disable controller to initiate requests for transition into U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: enable hardware remote wakeup from L1 automaticallyChunfeng Yun
Enable hardware remote wakeup from L1 automatically based on the FIFO status, instead of manual way. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: remove QMU checksumChunfeng Yun
The QMU checksum calculation is redundant, mostly used by debug, so remove it here. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb/mtu3: power down device ip at setupHsin-Yi, Wang
Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip, so host ip sleep will fail at ssusb_host_disable. Power down device ip at ssusb_host_setup. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-09-16Merge 4.19-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: mtu3: disable vbus rise/fall interrupts of ltssmChunfeng Yun
The vbus rise & fall interrupts are used to enable and disable U3 function of device automatically, this cause some issues when class driver is initialized as deactivated, and will skip over software-controlled connect by pullup(), but UDC wants to keep disconnect until usb_gadget_activate() is called which calls pullup() if needed. So we disable vbus rise & fall interrupts and just use pullup() to enable & disable U3 function, and reset mtu3 state when disconnect instead when vbus fall. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05usb: mtu3: fix error of xhci port id when enable U3 dual roleChunfeng Yun
If dual role mode is enabled, when switch u3port0 to device mode, it will affect port id calculation of host(xHCI), specially when host supports multi U2 ports or U3 ports, so need enable its dual role mode, and fix it here. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31USB: mtu3: no need to check return value of debugfs_create_dir()Greg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: fix warning of sleep in atomic context in notifier callbackChunfeng Yun
The notifier callbacks of extcon are called in atomic context, but the callbacks will call regulator_enable()/regulator_disable() which may sleep caused by mutex, so use work queue to call the sleep functions. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: reset gadget when VBUS_FALL interrupt arisesChunfeng Yun
When VBUS_FALL interrupt arises, it means U3 device is disconnected with host, so need reset status of gadget Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: avoid sleep in atomic context when enter test modeChunfeng Yun
Use readl_poll_timeout_atomic() instead of readl_poll_timeout() in atomic context Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: clear test_mode flag when resetChunfeng Yun
Clear test_mode flag when the gadget is reset by host, otherwise will affect the next test item. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: fix uncontinuous SeqN issue after disable EPChunfeng Yun
Reset EP when disable it to reset data toggle for U2 EP, and SeqN, flow control status etc for U3 EP, this can avoid issue of uncontinuous SeqN Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: re-enable controller to accept LPM request after LPM resumeChunfeng Yun
After the controller receives a LPM request, it will reject the LPM request, and need software to re-enable it after LPM resume if the controller doesn't remote wakeup from L1 automatically Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24Merge tag 'usb-for-v4.18' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: changes for v4.18 merge window A total of 98 non-merge commits, the biggest part being in dwc3 this time around with a large refactoring of dwc3's transfer handling code. We also have a new driver for Aspeed virtual hub controller. Apart from that, just a list of miscellaneous fixes all over the place.
2018-05-15usb: mtu3: make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3Chunfeng Yun
In fact the driver depends on EXTCON only when it's configed as USB_MTU3_DUAL_ROLE, so make USB_MTU3_DUAL_ROLE depend on EXTCON but not USB_MTU3. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: fix operation failure when test TEST_J/KChunfeng Yun
There is an error dialog popped up in PC when test TEST_J/K by EHSETT tool, due to not waiting for the completion of control transfer. Here fix it by entering test mode after Status Stage finish. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: fix an unrecognized issue when connected with PCChunfeng Yun
When boot on the platform with the USB cable connected to Win7, the Win7 will pop up an error dialog: "USB Device not recognized", but finally the Win7 can enumerate it successfully. The root cause is as the following: When the xHCI driver set PORT_POWER of the OTG port, and if both IDPIN and VBUS_VALID are high at the same time, the MTU3 controller will set SESSION and pull up DP, so the Win7 can detect existence of USB device, but if the mtu3 driver can't switch to device mode during the debounce time, the Win7 can not enumerate it. Here to fix it by removing the 1s delayed EXTCON register to speed up mode switch. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: remove repeated setting of gadget stateChunfeng Yun
The usb_add_gadget_udc() will set the gadget state as USB_STATE_NOTATTACHED, so we needn't set it again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: avoid TX data length truncated in SS/SSP modeChunfeng Yun
The variable of 'count' is declared as u8, this will cause an issue due to value truncated when works in SS or SSP mode and data length is greater than 255, so change it as u32. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: mtu3: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-04-22usb: mtu3: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-22usb: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> [drivers/usb/gadget/] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-16usb: mtu3: fix semicolon.cocci warningsFengguang Wu
drivers/usb/mtu3/mtu3_host.c:58:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: f0ede2c6282b ("usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPs") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 16:53:41 +0000