summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3
AgeCommit message (Collapse)Author
2020-08-18usb: mtu3: Remove unsused inline function is_first_entryYueHaibing
It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200731082008.33016-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: simplify mtu3_req_complete()Chunfeng Yun
Use argument req directly instead of mreq->request, they are the same usb request. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: clear dual mode of u3port when disable deviceChunfeng Yun
If not clear u3port's dual mode when disable device, the IP will fail to enter sleep mode when suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: use MTU3_EP_WEDGE flagChunfeng Yun
Use MTU3_EP_WEDGE flag instead of the member @wedged in mtu3_ep struct, then @wedged can be removed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: remove useless member @busy in mtu3_ep structChunfeng Yun
The member @busy in mtu3_ep struct is unnecessary, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: remove repeated error logChunfeng Yun
The caller already print error log. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: add ->udc_set_speed()Chunfeng Yun
Make use of the method to make sure connect on speeds supported by the gadget driver. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: introduce a funtion to check maximum speedChunfeng Yun
The max_speed got from DTS may be not supported by the hardware, so need check it, and assign a proper default value. And make it clear by introducing a funtion. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: clear interrupts status when disable interruptsChunfeng Yun
When disable interrupts, will also want to clear their status, ensure it by calling mtu3_intr_status_clear() in mtu3_intr_disable(). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: reinitialize CSR registersChunfeng Yun
The CSR registers will be reset as default value if the ports are disabled, so reinitialize them when the ports are enabled again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: fix macro for maximum number of packetsChunfeng Yun
The bits field for maximum number of packets is 8 bits. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: remove unnecessary pointer checksChunfeng Yun
The class driver will ensure the parameters are valid pointers before call the hook function of usb_ep_ops, so no need check them again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: convert to devm_platform_ioremap_resource_bynameChunfeng Yun
Use devm_platform_ioremap_resource_byname() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595404275-8449-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: mtu3: mtu3_trace: Supply missing mtu3_debug.h include fileLee Jones
If the header file containing a function's prototype isn't included by the sourcefile containing the associated function, the build system complains of missing prototypes. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_trace.c:13:6: warning: no previous prototype for ‘mtu3_dbg_trace’ [-Wmissing-prototypes] 13 | void mtu3_dbg_trace(struct device *dev, const char *fmt, ...) | ^~~~~~~~~~~~~~ Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-5-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: mtu3: mtu3_trace: Function headers are not suitable for kerneldocLee Jones
Kerneldoc headers should only be used to document functions and data structures. Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-4-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: mtu3: mtu3_debug: Add forward declaration of 'struct ssusb_mtk'Lee Jones
Without it, the build system complains that it was declared inside the parameter list. Fixes the following W=1 kernel build warning(s): In file included from drivers/usb/mtu3/mtu3_trace.c:11: drivers/usb/mtu3/mtu3_debug.h:29:36: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 29 | void ssusb_dev_debugfs_init(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:30:35: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 30 | void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:31:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 31 | void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb); | ^~~~~~~~~ drivers/usb/mtu3/mtu3_debug.h:32:39: warning: ‘struct ssusb_mtk’ declared inside parameter list will not be visible outside of this definition or declaration 32 | void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb); | ^~~~~~~~~ Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200703174148.2749969-2-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: mtu3: mtu3_core: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones
block No attempt has been made to document the function. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_core.c:805: warning: Function parameter or member 'mtu' not described in 'mtu3_set_dma_mask' Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-26-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24USB: ch9: add "USB_" prefix in front of TEST definesGreg Kroah-Hartman
For some reason, the TEST_ defines in the usb/ch9.h files did not have the USB_ prefix on it, making it a bit confusing when reading the file, as well as not the nicest thing to do in a uapi file. So fix that up and add the USB_ prefix on to them, and fix up all in-kernel usages. This included deleting the duplicate copy in the net2272.h file. Cc: Felipe Balbi <balbi@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jules Irenge <jbi.octave@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: Rob Gill <rrobgill@protonmail.com> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Bin Liu <b-liu@ti.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-18Merge 5.7-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14usb: mtu3: constify struct debugfs_reg32Rikard Falkeborn
mtu3_prb_regs is never changed and can therefore be made const. This allows the compiler to put it in the text section instead of the data section. Before: text data bss dec hex filename 19966 7120 0 27086 69ce drivers/usb/mtu3/mtu3_debugfs.o After: text data bss dec hex filename 20142 6992 0 27134 69fe drivers/usb/mtu3/mtu3_debugfs.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-04-16USB: mtu3: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to MediaTek USB3 Dual Role controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20200404103728.GA6011@nishad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-04usb: roles: Provide the switch drivers handle to the switch in the APIHeikki Krogerus
The USB role callback functions had a parameter pointing to the parent device (struct device) of the switch. The assumption was that the switch parent is always the controller. Firstly, that may not be true in every case, and secondly, it prevents us from supporting devices that supply multiple muxes. Changing the first parameter of usb_role_switch_set_t and usb_role_switch_get_t from struct device to struct usb_role_switch. Cc: Peter Chen <Peter.Chen@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200302135353.56659-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27usb: mtu3: fix missing include of mtu3_dr.hBen Dooks (Codethink)
The declarations of ssusb_gadget_{init,exit} are in the mtu3_dr.h file but the code does that implements them does not include this. Add the include to fix the following sparse warnigns: drivers/usb/mtu3/mtu3_core.c:825:5: warning: symbol 'ssusb_gadget_init' was not declared. Should it be static? drivers/usb/mtu3/mtu3_core.c:925:6: warning: symbol 'ssusb_gadget_exit' was not declared. Should it be static? Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-10-10usb: mtu3: fix race condition about delayed_statusChunfeng Yun
usb_composite_setup_continue() may be called before composite_setup() return USB_GADGET_DELAYED_STATUS, then the controller driver will delay status stage after composite_setup() finish, but the class driver don't ask the controller to continue delayed status anymore, this will cause control transfer timeout. happens when use mass storage (also enabled other class driver): cpu1: cpu2 handle_setup(SET_CONFIG) //gadget driver unlock (g->lock) gadget_driver->setup() composite_setup() lock(cdev->lock) set_config() fsg_set_alt() // maybe some times due to many class are enabled raise FSG_STATE_CONFIG_CHANGE return USB_GADGET_DELAYED_STATUS handle_exception() usb_composite_setup_continue() unlock(cdev->lock) lock(cdev->lock) ep0_queue() lock (g->lock) //no delayed status, nothing todo unlock (g->lock) unlock(cdev->lock) return USB_GADGET_DELAYED_STATUS // composite_setup lock (g->lock) get USB_GADGET_DELAYED_STATUS //handle_setup [1] Try to fix the race condition as following: After the driver gets USB_GADGET_DELAYED_STATUS at [1], if we find there is a usb_request in ep0 request list, it means composite already asked us to continue delayed status by usb_composite_setup_continue(), so we skip request about delayed_status by composite_setup() and still do status stage. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1570611900-7112-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10usb: mtu3: add a new function to do status stageChunfeng Yun
Exact a new static function to do status stage Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1570611900-7112-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: mtu3: register a USB Role Switch for dual role modeChunfeng Yun
Because extcon is not allowed for new bindings, and the dual role switch is supported by USB Role Switch, especially for Type-C drivers, so register a USB Role Switch to support the new way Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1567070558-29417-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10Revert "usb: mtu3: fix up undefined reference to usb_debug_root"Chunfeng Yun
It's not needed after [1] is applied, because usb_debug_root is created by usb common core but not usbcore now. [1] 812086d362a1 ("USB: move usb debugfs directory creation to the usb common core") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21usb: mtu3: fix up undefined reference to usb_debug_rootChunfeng Yun
When CONFIG_USB is not set, and CONFIG_USB_GADGET is set, there is an issue: ld: drivers/usb/mtu3/mtu3_debugfs.o: in function 'ssusb_debugfs_create_root': mtu3_debugfs.c:(.text+0xba3): undefined reference to 'usb_debug_root' usb_debug_root is only built when CONFIG_USB is enabled, so here drop it and use NULL instead. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: mtu3: get optional clock by devm_clk_get_optional()Chunfeng Yun
Use devm_clk_get_optional() to get optional clock instead of optional_clk_get() which uses devm_clk_get() to get clock and checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional() does, in fact, only ignoring -ENOENT will cover more errors, so the replacement doesn't change original purpose. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01Merge 5.1-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix EXTCON dependencyArnd Bergmann
When EXTCON is a loadable module, mtu3 fails to link as built-in: drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe': mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle' Add a Kconfig dependency to force mtu3 also to be a loadable module if extconn is, but still allow it to be built without extcon. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add a function to switch mailbox state to stringChunfeng Yun
By introducing mailbox_state_string(), allow to make debug log more readable Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add tracepoints to help debugChunfeng Yun
This patch implements a few initial tracepoints for the mtu3 driver. More traces can be added as necessary in order to ease the task of debugging. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: move vbus and mode debugfs interfaces into mtu3_debugfs.cChunfeng Yun
Due to the separated debugfs files are added, move vbus and mode debugfs interfaces related with dual-role switch from mtu3_dr.c into mtu3_debugfs.c Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add debugfs interface filesChunfeng Yun
This adds more debugfs consumers. The debugfs entries read some important registers, fifo status, QMU ring, endpoint status, and IPPC probe interface to get internal status. With these entries, users can check the registers, endpoint and GPD used during run time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: supports new QMU formatChunfeng Yun
In order to support U3gen2 ISOC transfer upto 96DPs, extend the data buffer length. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild qmu_gpd struct to prepare to support new QMU formatChunfeng Yun
To support USB3 Gen2 ISOC, the data buffer length need be extended, it's hard to make the current qmu_gpd struct compatible, so here rebuild qmu_gpd struct and make easy to support new QMU format Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix transfer error of USB3 Gen2 isocChunfeng Yun
To support USB3 Gen2 ISOC, the registers of TXCSR1 and RXCSR1 are adjusted to support greater maxpkt and mult value, this patch fix this issue Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild the code of getting vbus regulatorChunfeng Yun
Remove local variable @vbus and use @dev instead of @pdev->dev Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: remove unnecessary local variable @reqChunfeng Yun
The local variable @req is unnecessary in qmu_tx_zlp_error_handler, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: print useful information also for device and host modesChunfeng Yun
Print useful information not only dual-role mode but also device mode and host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: check return value of devm_extcon_register_notifier()Chunfeng Yun
Check the return value of devm_extcon_register_notifier() and add error handling. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman
There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-07usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handlerYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/mtu3/mtu3_qmu.c: In function 'qmu_tx_zlp_error_handler': drivers/usb/mtu3/mtu3_qmu.c:385:22: warning: variable 'req' set but not used [-Wunused-but-set-variable] It seems dbginfo original intention is print 'req' other than 'mreq' Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS modeChunfeng Yun
When the controller supports SS mode, but works as HS mode, the SOFTCONN will not be cleared automatically when clear USB3_EN by default, this cause an issue that can't disconnect from host, so clear SOFTCONN when clear USB3_EN when the class driver want to disable the D+ pullup. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: enable SETUPENDISR interruptChunfeng Yun
If the controller receives a new SETUP during SETUP data stage, and will generate SETUPENDISR interrupt, the driver should abort the current SETUP command and process the new one. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)Chunfeng Yun
Fix the issue: device doesn't accept LGO_U1/U2: 1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2 by default; 2. enable/disable controller to initiate requests for transition into U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-12-05usb: mtu3: enable hardware remote wakeup from L1 automaticallyChunfeng Yun
Enable hardware remote wakeup from L1 automatically based on the FIFO status, instead of manual way. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 12:47:35 +0000