summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3/mtu3_plat.c
AgeCommit message (Collapse)Author
2021-03-26usb: mtu3: drop CONFIG_OFChunfeng Yun
The driver can match only the devices created by the OF core via the DT table, so the table should be always used. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: convert to devm_platform_ioremap_resource_bynameChunfeng Yun
Use devm_platform_ioremap_resource_byname() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595404275-8449-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usb: mtu3: register a USB Role Switch for dual role modeChunfeng Yun
Because extcon is not allowed for new bindings, and the dual role switch is supported by USB Role Switch, especially for Type-C drivers, so register a USB Role Switch to support the new way Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1567070558-29417-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19usb: mtu3: get optional clock by devm_clk_get_optional()Chunfeng Yun
Use devm_clk_get_optional() to get optional clock instead of optional_clk_get() which uses devm_clk_get() to get clock and checks for -EPROBE_DEFER but not -ENOENT as devm_clk_get_optional() does, in fact, only ignoring -ENOENT will cover more errors, so the replacement doesn't change original purpose. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add debugfs interface filesChunfeng Yun
This adds more debugfs consumers. The debugfs entries read some important registers, fifo status, QMU ring, endpoint status, and IPPC probe interface to get internal status. With these entries, users can check the registers, endpoint and GPD used during run time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: rebuild the code of getting vbus regulatorChunfeng Yun
Remove local variable @vbus and use @dev instead of @pdev->dev Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: print useful information also for device and host modesChunfeng Yun
Print useful information not only dual-role mode but also device mode and host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: check return value of devm_extcon_register_notifier()Chunfeng Yun
Check the return value of devm_extcon_register_notifier() and add error handling. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb/mtu3: power down device ip at setupHsin-Yi, Wang
Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip, so host ip sleep will fail at ssusb_host_disable. Power down device ip at ssusb_host_setup. Signed-off-by: Hsin-Yi, Wang <hsinyi@chromium.org> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-22usb: mtu3: simplify getting .drvdataWolfram Sang
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPsChunfeng Yun
The old way of usb wakeup only supports platform with single SSUSB IP, such as mt8173, but mt2712 has two SSUSB IPs, so rebuild its flow and also supports the new glue layer of usb wakeup on mt2712 which is different from mt8173. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09usb: mtu3: fix error code for getting extcon deviceChunfeng Yun
When failing to get extcon device, extcon_get_edev_by_phandle() may return different error codes, but not only -EPROBE_DEFER, so can't always return -EPROBE_DEFER, and fix it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: mtu3: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19usb: mtu3: set invalid dr_mode as dual-role modeChunfeng Yun
Treat dr_mode of USB_DR_MODE_UNKNOWN as USB_DR_MODE_OTG to enhance functional robustness. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: get optional vbus for host only modeChunfeng Yun
When dr_mode is set as USB_DR_MODE_HOST, it's better to try to get optional vbus, this can increase flexibility, although we can set vbus as always on for regulator or put it in host driver to turn it on. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD switchChunfeng Yun
In order to keep manual DRD switch independent on IDDIG interrupt, make use of FORCE/RG_IDDIG instead of IDDIG EINT interrupt to implement manual DRD switch function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: add optional mcu and dma bus clocksChunfeng Yun
There are mcu_bus and dma_bus clocks needed to be turned on/off by driver on some SoCs, so add them as optional ones Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support option to disable usb3 portsChunfeng Yun
Add support to disable specific usb3 ports, it's useful when usb3 phy is shared with PCIe or SATA, because we should disable the corresponding usb3 port if the phy is used by PCIe or SATA. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-15usb: mtu3: add generic compatible stringChunfeng Yun
The mtu3 driver is a generic driver for MediaTek usb3 DRD IP, add a generic compatible to avoid confusion when support new SoCs but use a compatible with specific SoC's name "mt8173". Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-06-13usb: mtu3: Handle return value of clk_prepare_enableArvind Yadav
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-08usb: mtu3: make the reference clock optionalChunfeng Yun
Make the reference clock optional for DTS backward compatibility and ignore the error if it does not exist. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: mtu3: add reference clockChunfeng Yun
usually, the reference clock comes from 26M oscillator directly, but some SoCs are not, add it for compatibility. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19usb: mtu3: get resources that cause deferred probe earlierChunfeng Yun
Some resources such as regulator, clock usually cause deferred probe, get them earlier to avoid more ineffective processing. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: dual-role mode supportChunfeng Yun
support dual-role mode; there are two ways to switch between host and device modes, one is by idpin, another is by debugfs which depends on user input. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: host only mode supportChunfeng Yun
supports host only mode and the code is ported from host/xhci-mtk.c IPPC register shared between host and device is moved into common glue layer. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: Add MediaTek USB3 DRD driverChunfeng Yun
This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 12:36:27 +0000