summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2015-07-20usb: gadget: udc: core: Fix argument of dma_map_single for IOMMUYoshihiro Shimoda
The dma_map_single and dma_unmap_single should set "gadget->dev.parent" instead of "&gadget->dev" in the first argument because the parent has a udc controller's device pointer. Otherwise, iommu functions are not called in ARM environment. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-20usb: gadget: mv_udc_core: fix phy_regs I/O memory leakAlexey Khoroshilov
There was an omission in transition to devm_xxx resource handling. iounmap(udc->phy_regs) were removed, but ioremap() was left without devm_. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 3517c31a8ece6 ("usb: gadget: mv_udc: use devm_xxx for probe") Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-17configfs: fix kernel infoleak through user-controlled format stringNicolas Iooss
Some modules call config_item_init_type_name() and config_group_init_type_name() with parameter "name" directly controlled by userspace. These two functions call config_item_set_name() with this name used as a format string, which can be used to leak information such as content of the stack to userspace. For example, make_netconsole_target() in netconsole module calls config_item_init_type_name() with the name of a newly-created directory. This means that the following commands give some unexpected output, with configfs mounted in /sys/kernel/config/ and on a system with a configured eth0 ethernet interface: # modprobe netconsole # mkdir /sys/kernel/config/netconsole/target_%lx # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name # echo 1 > /sys/kernel/config/netconsole/target_%lx/enabled # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name # dmesg |tail -n1 [ 142.697668] netconsole: target (target_ffffffffc0ae8080) is enabled, disable to update parameters The directory name is correct but %lx has been interpreted in the internal item name, displayed here in the error message used by store_dev_name() in drivers/net/netconsole.c. To fix this, update every caller of config_item_set_name to use "%s" when operating on untrusted input. This issue was found using -Wformat-security gcc flag, once a __printf attribute has been added to config_item_set_name(). Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-06usb: gadget: f_midi: fix error recovery pathAndrzej Pietrasiewicz
In case kstrdup() fails the resources to release are midi->in_port[] and midi. No cards have been registered, so no need to unregister any. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: udc: fix free_irq() after request_irq() failedTakeshi Yoshimura
My static checker detected the mistake. I fix this by changing "goto err_irq" to "goto err_req". The label err_irq is not used now so this patch also removes it. Signed-off-by: Takeshi Yoshimura <yos@sslab.ics.keio.ac.jp> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: composite: Fix NULL pointer dereferenceKishon Vijay Abraham I
commit f563d230903210acc ("usb: gadget: composite: add req_match method to usb_function") accesses cdev->config even before set config is invoked causing a NULL pointer dereferencing error while running Lecroy Mass Storage Compliance test. Fix it here by accessing cdev->config only if it is non NULL. Fixes: commit f563d230903210acc ("usb: gadget: composite: add req_match method to usb_function"). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: f_fs: do not set cancel function on synchronous {read,write}Rui Miguel Silva
do not try to set cancel function in synchronous operations in ffs_epfile_{read,write}_iter. Cc: <stable@vger.kernel.org> # v4.0+ Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: f_mass_storage: limit number of reported LUNsMichal Nazarewicz
Mass storage function created via configfs always reports eight LUNs to the hosts even if only one LUN has been configured. Adjust the number when the USB function is allocated based on LUNs that user has created. Cc: <stable@vger.kernel.org> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
2015-07-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
2015-06-26Merge tag 'usb-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...
2015-06-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, hpsa, megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates. There is also one new driver: the Cisco snic. The advansys driver has been rewritten to get rid of the warning about converting it to the DMA API, the tape statistics patch got in and finally, there's a resuffle of SCSI header files to separate more cleanly initiator from target mode (and better share the common definitions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits) snic: driver for Cisco SCSI HBA qla2xxx: Fix indentation qla2xxx: Comment out unreachable code fusion: remove dead MTRR code advansys: fix compilation errors and warnings when CONFIG_PCI is not set mptsas: fix depth param in scsi_track_queue_full megaraid: fix irq setup process regression lpfc: Update version to 10.7.0.0 for upstream patch set. lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes lpfc: Fix scsi task management error message. lpfc: Fix cq_id masking problem. lpfc: Fix scsi prep dma buf error. lpfc: Add support for using block multi-queue lpfc: Devices are not discovered during takeaway/giveback testing lpfc: Fix vport deletion failure. lpfc: Check for active portpeerbeacon. lpfc: Update driver version for upstream patch set 10.6.0.1. lpfc: Change buffer pool empty message to miscellaneous category lpfc: Fix incorrect log message reported for empty FCF record. lpfc: Fix rport leak. ...
2015-06-23vfs: add file_path() helperMiklos Szeredi
Turn d_path(&file->f_path, ...); into file_path(file, ...); Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-15target: Drop unnecessary core_tpg_register TFO parameterNicholas Bellinger
This patch drops unnecessary target_core_fabric_ops parameter usage for core_tpg_register() during fabric driver TFO->fabric_make_tpg() se_portal_group creation callback execution. Instead, use the existing se_wwn->wwn_tf->tf_ops pointer to ensure fabric driver is really using the same TFO provided at module_init time. Also go ahead and drop the forward TFO declarations tree-wide, and handling the special case for iscsi-target discovery TPG. Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-08Merge 4.1-rc7 into usb-nextGreg Kroah-Hartman
This resolves a merge issue in musb_core.c and we want the fixes that were in Linus's tree in this branch as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-02target: Minimize SCSI header #include directivesBart Van Assche
Only include SCSI initiator header files in target code that needs these header files, namely the SCSI pass-through code and the tcm_loop driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in target code because the former is intended for initiator code and the latter for target code. With this patch the only initiator include directives in target code that remain are as follows: $ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h} drivers/target/loopback/tcm_loop.c:29:#include <scsi/scsi.h> drivers/target/loopback/tcm_loop.c:31:#include <scsi/scsi_host.h> drivers/target/loopback/tcm_loop.c:32:#include <scsi/scsi_device.h> drivers/target/loopback/tcm_loop.c:33:#include <scsi/scsi_cmnd.h> drivers/target/target_core_pscsi.c:39:#include <scsi/scsi_device.h> drivers/target/target_core_pscsi.c:40:#include <scsi/scsi_host.h> drivers/xen/xen-scsiback.c:52:#include <scsi/scsi_host.h> /* SG_ALL */ Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-02Merge tag 'usb-for-v4.2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.2 merge window - dwc2 adds hibernation support - preparation for sunxi glue to musb driver - new ULPI bus - new ULPI PHY driver for TUSB1210 - musb patches to support multiple DMA engines on same binary - support for R-Car E2 on renesas_usbhs Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-30target: target_core_configfs.h is not needed in fabric driversChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: Move task tag into struct se_cmd + support 64-bit tagsBart Van Assche
Simplify target core and target drivers by storing the task tag a.k.a. command identifier inside struct se_cmd. For several transports (e.g. SRP) tags are 64 bits wide. Hence add support for 64-bit tags. (Fix core_tmr_abort_task conversion spec warnings - nab) (Fix up usb-gadget to use 16-bit tags - HCH + bart) Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: move transport ID handling to the coreChristoph Hellwig
Now that struct se_portal_group contains a protocol identifier field we can take all the code to format an parse protocol identifiers in CDBs into common code instead of leaving this to low-level drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: remove the get_fabric_proto_ident methodChristoph Hellwig
Now that we store the protocol identifier in the tpg structure we don't need this method. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: change core_tpg_register prototypeChristoph Hellwig
Remove the unneeded fabric_ptr argument, and change the type argument to pass in a SPC protocol identifier. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: move node ACL allocation to core codeChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: refactor init/drop_nodeacl methodsChristoph Hellwig
By always allocating and adding, respectively removing and freeing the se_node_acl structure in core code we can remove tons of repeated code in the init_nodeacl and drop_nodeacl routines. Additionally this now respects the get_default_queue_depth method in this code path as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: make the tpg_get_default_depth method optionalChristoph Hellwig
All fabric drivers except for iSCSI always return 1, so implement that as default behavior. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30tcm_usb: remove struct usbg_naclChristoph Hellwig
Except for the embedded struct se_node_acl none of the fields were ever used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-27usb: gadget: atmel: fix build warningsFelipe Balbi
This patch fixes the following build warnings: drivers/usb/gadget/udc/atmel_usba_udc.c:2207:12: warning: ‘usba_udc_suspend’ defined but not used [-Wunused-function] static int usba_udc_suspend(struct device *dev) drivers/usb/gadget/udc/atmel_usba_udc.c:2236:12: warning: ‘usba_udc_resume’ defined but not used [-Wunused-function] static int usba_udc_resume(struct device *dev) Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: atmel: fix build warningFelipe Balbi
This patch fixes the following build warning: drivers/usb/gadget/udc/atmel_usba_udc.c:707:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ [-Wformat=] Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: fix pullup handlingMian Yousaf Kaukab
Gadget must be informed about disconnection when pullup is removed. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: physically disable endpoint on disable operationMian Yousaf Kaukab
Reset configuration in ep_cfg on disable to physically disable the endpoint. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: autoconf: net2280: match hardware and usb ep addressMian Yousaf Kaukab
USB3380 GPEP can be used in IN and OUT directions however, both directions should use same endpoint address. Fulfil this requirement by mapping usb endpoint to hardware endpoint with the same address. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: fix use of GPEP in both directionsMian Yousaf Kaukab
USB3380 enhanced mode allows GPEP to be used in both IN and OUT directions. However, IN and OUT endpoints must use same USB endpoint address (bEndpointAddress). Fix this by setting the ep_cfg.ep_number during initialization and keep it in net2280_enable() Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: check interrupts for all endpointsMian Yousaf Kaukab
USB3380 in enhanced mode has 4 IN and 4 OUT endpoints. Check interrupts for all of them. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: set all byte enables on startMian Yousaf Kaukab
Default 0 value can result in unintentional zlp for IN endpoints. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: don't set ep_cfg.direction bitMian Yousaf Kaukab
USB3380 ep_cfg.direction bit is reserved in enhanced mode. Don't set it. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: unconditionally reset dma in usb_resetMian Yousaf Kaukab
If ep->dma is set, abort_dma() takes care of dma clean-up. If ep->dma is not set, unconditionally reset dma channel. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: reset sequence number on ep enableMian Yousaf Kaukab
Sequence number can be out of sync if endpoint is disabled after some data transfers and enabled again. Reset it to stay in sync with host. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: net2280: fix ep_cfg for defect7374Mian Yousaf Kaukab
ep_cfg.IN_EP_ENABLE is only valid in advance mode. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: f_fs: add extra check before unregister_gadget_itemRui Miguel Silva
ffs_closed can race with configfs_rmdir which will call config_item_release, so add an extra check to avoid calling the unregister_gadget_item with an null gadget item. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: f_fs: fix check in read operationRui Miguel Silva
when copying to iter the size can be different then the iov count, the check for full iov is wrong and make any read on request which is not the exactly size of iov to return -EFAULT. So, just check the success of the copy. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: f_uac1: check return code from config_ep_by_speedMichael Trimarchi
Not checking config_ep_by_speed could lead to a kernel NULL pointer dereference error in usb_ep_enable Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: ffs: fix: Always call ffs_closed() in ffs_data_clear()Krzysztof Opasiak
Originally FFS_FL_CALL_CLOSED_CALLBACK flag has been used to indicate if we should call ffs_closed_callback(). Commit 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code") changed its semantic to indicate if we should call ffs_closed() function which does a little bit more. This situation leads to: [ 122.362269] ------------[ cut here ]------------ [ 122.362287] WARNING: CPU: 2 PID: 2384 at drivers/usb/gadget/function/f_fs.c:3417 ffs_ep0_write+0x730/0x810 [usb_f_fs]() [ 122.362292] Modules linked in: [ 122.362555] CPU: 2 PID: 2384 Comm: adbd Tainted: G W 4.1.0-0.rc4.git0.1.1.fc22.i686 #1 [ 122.362561] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/25/2014 [ 122.362567] c0d1f947 415badfa 00000000 d1029e64 c0a86e54 00000000 d1029e94 c045b937 [ 122.362584] c0c37f94 00000002 00000950 f9b313d4 00000d59 f9b2ebf0 f9b2ebf0 fffffff0 [ 122.362600] 00000003 deb53d00 d1029ea4 c045ba42 00000009 00000000 d1029f08 f9b2ebf0 [ 122.362617] Call Trace: [ 122.362633] [<c0a86e54>] dump_stack+0x41/0x52 [ 122.362645] [<c045b937>] warn_slowpath_common+0x87/0xc0 [ 122.362658] [<f9b2ebf0>] ? ffs_ep0_write+0x730/0x810 [usb_f_fs] [ 122.362668] [<f9b2ebf0>] ? ffs_ep0_write+0x730/0x810 [usb_f_fs] [ 122.362678] [<c045ba42>] warn_slowpath_null+0x22/0x30 [ 122.362689] [<f9b2ebf0>] ffs_ep0_write+0x730/0x810 [usb_f_fs] [ 122.362702] [<f9b2e4c0>] ? ffs_ep0_read+0x380/0x380 [usb_f_fs] [ 122.362712] [<c05a1c1f>] __vfs_write+0x2f/0x100 [ 122.362722] [<c05a42f2>] ? __sb_start_write+0x52/0x110 [ 122.362731] [<c05a2534>] vfs_write+0x94/0x1b0 [ 122.362740] [<c0a8a1c0>] ? mutex_lock+0x10/0x30 [ 122.362749] [<c05a2f41>] SyS_write+0x51/0xb0 [ 122.362759] [<c0a8c71f>] sysenter_do_call+0x12/0x12 [ 122.362766] ---[ end trace 0673d3467cecf8db ]--- in some cases (reproduction path below). This commit get back semantic of that flag and ensures that ffs_closed() is called always when needed but ffs_closed_callback() is called only if this flag is set. Reproduction path: Compile kernel without any UDC driver or bound some gadget to existing one and then: $ modprobe g_ffs $ mount none -t functionfs mount_point $ ffs-example mount_point This will fail with -ENODEV as there is no udc. $ ffs-example mount_point This will fail with -EBUSY because ffs_data has not been properly cleaned up. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: gadget: g_ffs: Fix counting of missing_functionsKrzysztof Opasiak
Returning non-zero value from ready callback makes ffs instance return error from writing strings and enter FFS_CLOSING state. This means that this this function is not truly ready and close callback will not be called. This commit fix ffs_ready_callback() to undo all side effects of this function in case of error. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-26usb: s3c2410_udc: correct reversed pullup logicSergiy Kibrik
For some reason the code has always been disabling pullup when asked to do the opposite. According to surrounding code and gadget API this seems to be a mistake. This fix allows UDC to be detected by host controller on recent kernels. Signed-off-by: Sergiy Kibrik <sakib@meta.ua> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-21usb: gadget: rndis: use signed type for a signed valueAndrzej Pietrasiewicz
rndis_get_nr() returns either a non-negative value on success or a negative value on failure. In case of failure an error code is returned to the caller of rndis_register(). If the "i" is unsigned, the information about error from rndis_get_nr() is lost. If there is no error but rndis_get_nr() returns a value greater than 256 the least significant bits of i are zero effectively limiting the number of configs to 256. This patch fixes that. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-21usb: gadget: rndis: don't duplicate the "i" variableAndrzej Pietrasiewicz
If CONFIG_USB_GADGET_DEBUG_FILES is set then a block is opened and inside it there is a local variable "i" which hides the "i" local to the rndis_deregister(). Consequently, a random value is formatted into the "name" buffer. This patch removes the block-local i. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-21usb: gadget: rndis: change the value passed to rndis_signal_(dis)connect()Andrzej Pietrasiewicz
The patch: 83210e59ee1527f229af6aef78c95b747bdcf9c4 usb: gadget: rndis: use rndis_params instead of configNr should change all invocations of rndis_signal_(dis)connect(). This patch fixes that. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-18Merge 4.1-rc4 into usb-nextGreg Kroah-Hartman
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-14usb: gadget: f_midi: fix segfault when reading empty idPawel Szewczyk
When midi function is created, 'id' attribute is initialized with SNDRV_DEFAULT_STR1, which is NULL pointer. Trying to read this attribute before filling it ends up with segmentation fault. This commit fix this issue by preventing null pointer dereference. Now f_midi_opts_id_show() returns empty string when id is a null pointer. Reproduction path: $ mkdir functions/midi.0 $ cat functions/midi.0/id [ 53.130132] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 53.132630] pgd = ec6cc000 [ 53.135308] [00000000] *pgd=6b759831, *pte=00000000, *ppte=00000000 [ 53.141530] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 53.146904] Modules linked in: usb_f_midi snd_rawmidi libcomposite [ 53.153071] CPU: 1 PID: 2936 Comm: cat Not tainted 3.19.0-00041-gcf4b216 #7 [ 53.160010] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 53.166088] task: ee234c80 ti: ec764000 task.ti: ec764000 [ 53.171482] PC is at strlcpy+0x8/0x60 [ 53.175128] LR is at f_midi_opts_id_show+0x28/0x3c [usb_f_midi] [ 53.181019] pc : [<c0222a9c>] lr : [<bf01bed0>] psr: 60000053 [ 53.181019] sp : ec765ef8 ip : 00000141 fp : 00000000 [ 53.192474] r10: 00019000 r9 : ed7546c0 r8 : 00010000 [ 53.197682] r7 : ec765f80 r6 : eb46a000 r5 : eb46a000 r4 : ed754734 [ 53.204192] r3 : ee234c80 r2 : 00001000 r1 : 00000000 r0 : eb46a000 [ 53.210704] Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment user [ 53.217907] Control: 10c5387d Table: 6c6cc04a DAC: 00000015 [ 53.223636] Process cat (pid: 2936, stack limit = 0xec764238) [ 53.229364] Stack: (0xec765ef8 to 0xec766000) [ 53.233706] 5ee0: ed754734 ed7546c0 [ 53.241866] 5f00: eb46a000 bf01bed0 eb753b80 bf01cc44 eb753b98 bf01b0a4 bf01b08c c0125dd0 [ 53.250025] 5f20: 00002f19 00000000 ec432e00 bf01cce8 c0530c00 00019000 00010000 ec765f80 [ 53.258184] 5f40: 00010000 ec764000 00019000 c00cc4ac ec432e00 c00cc55c 00000017 000081a4 [ 53.266343] 5f60: 00000001 00000000 00000000 ec432e00 ec432e00 00010000 00019000 c00cc620 [ 53.274502] 5f80: 00000000 00000000 00000000 00010000 ffff1000 00019000 00000003 c000e9a8 [ 53.282662] 5fa0: 00000000 c000e7e0 00010000 ffff1000 00000003 00019000 00010000 00019000 [ 53.290821] 5fc0: 00010000 ffff1000 00019000 00000003 7fffe000 00000001 00000000 00000000 [ 53.298980] 5fe0: 00000000 be8c68d4 0000b995 b6f0e3e6 40000070 00000003 00000000 00000000 [ 53.307157] [<c0222a9c>] (strlcpy) from [<bf01bed0>] (f_midi_opts_id_show+0x28/0x3c [usb_f_midi]) [ 53.316006] [<bf01bed0>] (f_midi_opts_id_show [usb_f_midi]) from [<bf01b0a4>] (f_midi_opts_attr_show+0x18/0x24 ) [ 53.327209] [<bf01b0a4>] (f_midi_opts_attr_show [usb_f_midi]) from [<c0125dd0>] (configfs_read_file+0x9c/0xec) [ 53.337180] [<c0125dd0>] (configfs_read_file) from [<c00cc4ac>] (__vfs_read+0x18/0x4c) [ 53.345073] [<c00cc4ac>] (__vfs_read) from [<c00cc55c>] (vfs_read+0x7c/0x100) [ 53.352190] [<c00cc55c>] (vfs_read) from [<c00cc620>] (SyS_read+0x40/0x8c) [ 53.359056] [<c00cc620>] (SyS_read) from [<c000e7e0>] (ret_fast_syscall+0x0/0x34) [ 53.366513] Code: ebffe3d3 e8bd8008 e92d4070 e1a05000 (e5d14000) [ 53.372641] ---[ end trace e4f53a4e233d98d0 ]--- Signed-off-by: Pawel Szewczyk <p.szewczyk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-10USB: inode.c: move assignment out of if () blockGreg Kroah-Hartman
We should not be doing assignments within an if () block so fix up the code to not do this. change was created using Coccinelle. CC: Al Viro <viro@zeniv.linux.org.uk> CC: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: Andrzej Pietrasiewicz <andrzej.p@samsung.com> CC: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 13:50:19 +0000