summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2016-11-18usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()Felix Hädicke
Properly check the return code of ffs_func_revmap_intf() and ffs_func_revmap_ep() for a non-negative value. Instead of checking the return code, the comparison was performed for the last parameter of the function calls, because of wrong parenthesis. This also fixes the following static checker warning: drivers/usb/gadget/function/f_fs.c:3152 ffs_func_req_match() warn: always true condition '(((creq->wIndex)) >= 0) => (0-u16max >= 0)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-01usb: gadget: u_ether: remove interrupt throttlingFelipe Balbi
According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: f_fs: stop sleeping in ffs_func_eps_disableMichal Nazarewicz
ffs_func_eps_disable is called from atomic context so it cannot sleep thus cannot grab a mutex. Change the handling of epfile->read_buffer to use non-sleeping synchronisation method. Reported-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Michał Nazarewicz <mina86@mina86.com> Fixes: 9353afbbfa7b ("buffer data from ‘oversized’ OUT requests") Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: f_fs: edit epfile->ep under lockMichal Nazarewicz
epfile->ep is protected by ffs->eps_lock (not epfile->mutex) so clear it while holding the spin lock. Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: function: u_ether: don't starve tx request queueFelipe Balbi
If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: udc: atmel: fix endpoint nameAlexandre Belloni
Since commit c32b5bcfa3c4 ("ARM: dts: at91: Fix USB endpoint nodes"), atmel_usba_udc fails with: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/usb/gadget.h:405 ecm_do_notify+0x188/0x1a0 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0+ #15 Hardware name: Atmel SAMA5 [<c010ccfc>] (unwind_backtrace) from [<c010a7ec>] (show_stack+0x10/0x14) [<c010a7ec>] (show_stack) from [<c0115c10>] (__warn+0xe4/0xfc) [<c0115c10>] (__warn) from [<c0115cd8>] (warn_slowpath_null+0x20/0x28) [<c0115cd8>] (warn_slowpath_null) from [<c04377ac>] (ecm_do_notify+0x188/0x1a0) [<c04377ac>] (ecm_do_notify) from [<c04379a4>] (ecm_set_alt+0x74/0x1ac) [<c04379a4>] (ecm_set_alt) from [<c042f74c>] (composite_setup+0xfc0/0x19f8) [<c042f74c>] (composite_setup) from [<c04356e8>] (usba_udc_irq+0x8f4/0xd9c) [<c04356e8>] (usba_udc_irq) from [<c013ec9c>] (handle_irq_event_percpu+0x9c/0x158) [<c013ec9c>] (handle_irq_event_percpu) from [<c013ed80>] (handle_irq_event+0x28/0x3c) [<c013ed80>] (handle_irq_event) from [<c01416d4>] (handle_fasteoi_irq+0xa0/0x168) [<c01416d4>] (handle_fasteoi_irq) from [<c013e3f8>] (generic_handle_irq+0x24/0x34) [<c013e3f8>] (generic_handle_irq) from [<c013e640>] (__handle_domain_irq+0x54/0xa8) [<c013e640>] (__handle_domain_irq) from [<c010b214>] (__irq_svc+0x54/0x70) [<c010b214>] (__irq_svc) from [<c0107eb0>] (arch_cpu_idle+0x38/0x3c) [<c0107eb0>] (arch_cpu_idle) from [<c0137300>] (cpu_startup_entry+0x9c/0xdc) [<c0137300>] (cpu_startup_entry) from [<c0900c40>] (start_kernel+0x354/0x360) [<c0900c40>] (start_kernel) from [<20008078>] (0x20008078) ---[ end trace e7cf9dcebf4815a6 ]--- Fixes: c32b5bcfa3c4 ("ARM: dts: at91: Fix USB endpoint nodes") Cc: <stable@vger.kernel.org> Reported-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-09-27fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-19Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock"Greg Kroah-Hartman
This reverts commit c9ffc78745f89e300fe704348dd8e6800acf4d18 as it was reported to be broken. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jim Baxter <jim_baxter@mentor.com> Cc: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-14Merge tag 'usb-for-v4.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.9 merge window This time around we have 92 non-merge commits. Most of the changes are in drivers/usb/gadget (40.3%) with drivers/usb/gadget/function being the most active directory (27.2%). As for UDC drivers, only dwc3 (26.5%) and dwc2 (12.7%) have really been active. The most important changes for dwc3 are better support for scatterlist and, again, throughput improvements. While on dwc2 got some minor stability fixes related to soft reset and FIFO usage. Felipe Tonello has done some good work fixing up our f_midi gadget and Tal Shorer has implemented a nice API change for our ULPI bus. Apart from these, we have our usual set of non-critical fixes, spelling fixes, build warning fixes, etc.
2016-09-13usb: gadget: uvc: add V4L2 dependencyArnd Bergmann
Building the UVC gadget into the kernel fails to build when CONFIG_VIDEO_V4L2 is a loadable module: drivers/usb/gadget/function/usb_f_uvc.o: In function `uvc_function_ep0_complete': uvc_configfs.c:(.text.uvc_function_ep0_complete+0x84): undefined reference to `v4l2_event_queue' drivers/usb/gadget/function/usb_f_uvc.o: In function `uvc_function_disable': uvc_configfs.c:(.text.uvc_function_disable+0x34): undefined reference to `v4l2_event_queue' Adding a dependency in USB_CONFIGFS_F_UVC (which is a bool symbol) make the 'select USB_F_UVC' statement turn the USB_F_UVC into 'm' whenever CONFIG_VIDEO_V4L2=m too, avoiding the link failure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-12Merge 4.8-rc6 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09usb: gadget: NCM: Protect dev->port_usb using dev->lockHarish Jenny K N
This commit incorporates findings from https://lkml.org/lkml/2016/4/25/594 The function has been modified to make sure we hold the dev lock when accessing the net device pointer. Acked-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09usb: gadget: u_ether: fix another dereference after null checkHarish Jenny K N
dev->port_usb is checked for null pointer previously, so dev->port_usb might be null during no zlp check, fix it by adding null pointer check. Acked-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-09usb: gadget: remove variable ret and remove unnecessary if statementColin Ian King
the if statement in lb_modinit is unnecessary so we can totally remove the variable ret and just return the return value from the call to usb_function_register. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-08usb: gadget: f_fs: Stop ffs_closed NULL pointer dereferenceJim Baxter
The struct ffs_data::private_data has a pointer to ffs_dev stored in it during the ffs_fs_mount() function however it is not cleared when the ffs_dev is freed later which causes the ffs_closed function to crash with "Unable to handle kernel NULL pointer dereference" error when using the data in ffs_data::private_data. This clears this pointer during the ffs_free_dev clean up function. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: gadget: prevent potenial null pointer dereference on skb->lenColin Ian King
An earlier fix partially fixed the null pointer dereference on skb->len by moving the assignment of len after the check on skb being non-null, however it failed to remove the erroneous dereference when assigning len. Correctly fix this by removing the initialisation of len as was originally intended. Fixes: 70237dc8efd092 ("usb: gadget: function: f_eem: socket buffer may be NULL") Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CONYoshihiro Shimoda
This driver should clear the bit. Otherwise, the VBUS will output wrongly if the usb port on a board has VBUS output capability. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05Merge 4.8-rc5 into usb-testingGreg Kroah-Hartman
We want the USB fixes in here for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02usb: gadget: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31usb: gadget: configfs: log function unbinding as debugRomain Izard
Disabling USB gadget functions configured through configfs is something that can happen in normal use cases. Keep the existing log for this type of event, but only as debug, not as an error. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: uvc: Add missing call for additional setup dataPetr Cvek
Some UVC commands require additional data (non zero uvc->event_length). Add usb_ep_queue() call, so uvc_function_ep0_complete() can be called and send received data to the userspace. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: f_ncm: add support for no_skb_reserveYoshihiro Shimoda
This patch adds to support no_skb_reserve function to improve performance for some platforms. About the detail, please refer to the commit log of "quirk_avoids_skb_reserve" in include/linux/usb/gadget.h. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: u_ether: add a flag to avoid skb_reserve() callingYoshihiro Shimoda
This patch adds a flag "no_skb_reserve" in struct eth_dev. So, if a peripheral driver sets the quirk_avoids_skb_reserve flag, upper network gadget drivers (e.g. f_ncm.c) can avoid skb_reserve() calling using the flag as well. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: net2280: fix typo: "Inavlid" -> "Invalid"Colin Ian King
trivial typo fix in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-30usb: gadget: udc: udc-xilinx: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: gadget: udc: goku_udc: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: gadget: udc: fsl_qe_udc: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-29usb: gadget: goku_udc: fix memory leak in goku_probe()Alexey Khoroshilov
Memory allocated for goku_udc device is not deallocated at error paths in goku_probe(), because gadget_release() destructor is not registered yet. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-29usb: gadget: udc: udc-xilinx: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-29usb: gadget: udc: goku_udc: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-29usb: gadget: udc: fsl_qe_udc: don't print on ENOMEMWolfram Sang
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-26usb: gadget: don't couple configfs to legacy gadgetsFelipe Balbi
It's perfectly fine to have all configfs functions built-in while having modular legacy gadgets. Let's allow for that. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_hid: use alloc_ep_req()Felipe F. Tonello
Use gadget's framework allocation function instead of directly calling usb_ep_alloc_request(). Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_hid: use free_ep_req()Felipe F. Tonello
We should always use free_ep_req() when allocating requests with alloc_ep_req(). Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: remove useless parameter in alloc_ep_req()Felipe F. Tonello
The default_length parameter of alloc_ep_req was not really necessary and gadget drivers would almost always create an inline function to pass the same value to len and default_len. This patch removes that parameter and updates all calls to alloc_ep_req() to use the new API. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_fs: handle control requests in config 0Felix Hädicke
Introduces a new FunctionFS descriptor flag named FUNCTIONFS_CONFIG0_SETUP. When this flag is enabled, FunctionFS userspace drivers can process non-standard control requests in configuration 0. Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: composite: let USB functions process ctrl reqs in cfg0Felix Hädicke
It can sometimes be necessary for gadget drivers to process non-standard control requests, which host devices can send without having sent USB_REQ_SET_CONFIGURATION. Therefore, the req_match() usb_function method is enhanced with the new parameter "config0". When a USB configuration is active, this parameter is false. When a non-core control request is processed in composite_setup(), without an active configuration, req_match() of the USB functions of all available configurations which implement this function, is called with config0=true. Then the control request gets processed by the first usb_function instance whose req_match() returns true. Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_fs: handle control requests not directed to interface or endpointFelix Hädicke
Introduces a new FunctionFS descriptor flag named FUNCTIONFS_ALL_CTRL_RECIP. When this flag is enabled, control requests, which are not explicitly directed to an interface or endpoint, can be handled. This allows FunctionFS userspace drivers to process non-standard control requests. Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_hid: add dev to configfsJohannes Berg
Even if the /dev/hidg* chardev is automatically created, one has to guess which one belongs to which function. In the case of multiple HID functions, or maybe even multiple peripherals, this becomes difficult. Add the dev (with major and minor number) to configfs to allow looking up (or even creating) the right device node for each function. This file is read-only. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_midi: drop substreams when disabling endpointFelipe F. Tonello
This change makes sure that the ALSA buffers are cleaned if an endpoint becomes disabled. Before this change, if the internal ALSA buffer did overflow, the MIDI function would stop sending MIDI to the host. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_midi: refactor state machineFelipe F. Tonello
This refactor results in a cleaner state machine code and promotes consistency, readability, and maintanability of this driver. This refactor state machine was well tested and it is currently running in production code and devices. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_midi: defaults buflen sizes to 512Felipe F. Tonello
512 is the value used by wMaxPacketSize, as specified by the USB Spec. This makes sure this driver uses, by default, the most optimal value for IN and OUT endpoint requests. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_midi: remove alignment code for OUT endpointFelipe F. Tonello
The new version of alloc_ep_req() already aligns the buffer size to wMaxPacketSize on OUT endpoints. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: align buffer size when allocating for OUT endpointFelipe F. Tonello
Using usb_ep_align() makes sure that the buffer size for OUT endpoints is always aligned with wMaxPacketSize (512 usually). This makes sure that no buffer has the wrong size, which can cause nasty bugs. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: change len to size_t on alloc_ep_req()Felipe F. Tonello
Length of buffers should be of type size_t whenever possible. Altough recommended, this change has no real practical change, unless a driver has a uses a huge or negative buffer size - it might help find these bugs. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: Add per-lun inquiry stringPhilipp Gesang
Introduce an attribute "inquiry_string" to the lun. In some environments, e. g. BIOS boot menus, the inquiry string is the only information about devices presented to the user. The default string depends on the "cdrom" bit of the first lun as well as the kernel version and allows no further customization. So without access to the client it is not obvious which gadget is active at a given point and what any of the available luns might contain. If "inquiry_string" is ignored or set to the empty string, the old behavior is preserved. Signed-off-by: Philipp Gesang <philipp.gesang@intra2net.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: net2280: match interrupt endpoints to PIO endpoints and DMA to bulkJussi Kivilinna
With composite gadget (ACM + NCM), USB3380 to host TCP transfer speed dropped to 150 Mbit/s compared to 900 Mbit/s with NCM gadget. Problem seems to be that net2280/USB3380 has only four DMA channels and those DMA channels are allocated to first HW endpoints. Endpoint match function was mapping endpoint names directly, so NCM did not get DMA for bulk endpoints. This patch changed match_ep to prefer DMA enabled hw endpoints for bulk usb endpoints and PIO for interrupt usb endpoints. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: net2280: fix infinite loop in irq handlerJussi Kivilinna
With SuperSpeed CDC NCM gadget, net2280 would get stuck in 'handle_ep_small' function. Triggering issue requires large TCP transfer from host to USB3380. Patch adds check for stuck condition and prevents hard lockup. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 05:49:58 +0000