summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)Author
2012-01-09Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Cleanups on various subarchitectures Cleanup patches for various ARM platforms and some of their associated drivers, the bulk of these is for mach-91. Arnd ended up pulling in the restart branch from Russell in order to fix up some simple but annoying merge conflicts. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) arm/at91: fix build of stamp9g20 ARM: u300: delete memory.h MAINTAINERS: add maintainer entry for Picochip picoxcell ARM: picoxcell: move io mappings to common.c ARM: picoxcell: don't reserve irq_descs ARM: picoxcell: remove mach/memory.h ARM: at91: delete the pcontrol_g20_defconfig arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC arm/tegra: remove unused defines arm/tegra: fix variable formatting in makefile ARM: davinci: vpif: move code to driver core header from platform ARM: at91/gpio: fix display of number of irq setuped ARM: at91/gpio: drop PIN_BASE ARM: at91/udc: use gpio_is_valid to check the gpio ARM: at91/ohci: use gpio_is_valid to check the gpio ARM: at91/nand: use gpio_is_valid to check the gpio ARM: at91/mmc: use gpio_is_valid to check the gpio ARM: at91/ide: use gpio_is_valid to check the gpio ARM: at91/pata: use gpio_is_valid to check the gpio ARM: at91/soc: use gpio_is_valid to check the gpio ...
2012-01-09Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
2012-01-08... and the same for gadgetfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08functionfs: unfuck failure exits on mountAl Viro
* if you do dput() of root dentry, do *not* follow that with iput() of root inode. * while we are at it, don't do that dput() at all - you are leaving the pointer in ->s_root and your ->kill_sb() will be very unhappy with that. It will do proper dput(), though, so the easiest way is to leave that to it entirely. * freeing ->s_fs_info is also best left to ->kill_sb() (which will do it anyway), especially since we leave the pointer in place. * that xchg() in ->kill_sb() is not a bug per se, but it's a plain and simple masturbation with fewer excuses than Onan had... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-07Merge branch 'depends/rmk/restart' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-at91/at91sam9rl.c arch/arm/mach-exynos/cpu.c arch/arm/mach-shmobile/board-kota2.c This resolves a bunch of conflicts between the arm-soc tree and changes from the arm tree that have gone upstream. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-02misc latin1 to utf8 conversionsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-22Merge branch 'for-gadget/next' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits) usb: dwc3: gadget: add support for SG lists usb: dwc3: gadget: don't force 'LST' always usb: dwc3: gadget: don't return anything on prepare trbs usb: dwc3: gadget: re-factor dwc3_prepare_trbs() usb: gadget: introduce support for sg lists usb: renesas: pipe: convert a long if into a XOR operation usb: gadget: remove useless depends on Kconfig usb: gadget: s3c-hsudc: remove the_controller global usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource usb: gadget: s3c-hsudc: Add regulator handling usb: gadget: s3c-hsudc: use udc_start and udc_stop functions usb: gadget: s3c-hsudc: move device registration to probe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe usb: gadget: s3c-hsudc: add __devinit to probe function usb: gadget: s3c-hsudc: move platform_data struct to global header USB: EHCI: Add Marvell Host Controller driver USB: OTG: add Marvell usb OTG driver support usb: gadget: mv_udc: drop ARCH dependency usb: gadget: mv_udc: fix bug in ep_dequeue usb: gadget: enlarge maxburst bit width. ...
2011-12-21usb: gadget: remove useless depends on KconfigFelipe Contreras
Where are inside an 'if USB_GADGET'. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: remove the_controller globalHeiko Stübner
Instead use container_of to retrieve the s3c_hsudc from the struct usb_gadget pointer. [ balbi@ti.com : changed verbose container_of() into an already provided helper 'to_hsudc()' ] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: use release_mem_region instead of release_resourceHeiko Stübner
As the memory region is requested through request_mem_region use the correct paired method to release it in the error path and don't go "beneath the API". Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: Add regulator handlingHeiko Stübner
The udc has three supplies: vdda (3.3V), vddi (1.2V) and vddosc (1.8-3.3V). Turn these on and off on start and stop calls. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: use udc_start and udc_stop functionsHeiko Stübner
udc_start and udc_stop reduce code duplication in comparison to start and stop generalising calls done by all drivers (i.e. bind and unbind) and moving these calls to common code. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: move device registration to probeHeiko Stübner
Instead of adding and deleting the gadget device in the start and stop invocations. Use device_register in the probe method to initialize and add the gadget device. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probeHeiko Stübner
The number of get and put calls should always be equal. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: add __devinit to probe functionHeiko Stübner
Fixes possible section mismatch warnings. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21usb: gadget: s3c-hsudc: move platform_data struct to global headerHeiko Stübner
Gadget drivers should be compilable on all architectures. This patch removes one dependency on architecture-specific code. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: gadget: mv_udc: drop ARCH dependencyNeil Zhang
This patch do the following things: 1. Change the Kconfig information. 2. Rename the driver name. 3. Don't do any type cast to io memory. 4. Add dummy stub for clk framework. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: gadget: mv_udc: fix bug in ep_dequeueNeil Zhang
According to ChipIdea's SPEC, we cannot touch curr_dtd_ptr in dqh directly, use prime endpoint instead. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19usb: gadget: epautoconf: do not change number of streamsFelipe Balbi
We should not change gadget driver's descriptors just because we think it's right to do so. There are several of reasons which would support this statement but it suffices to say that this was probably never tested because it updates bmAttributes without asking the driver if it's ok to do so. This means that e.g. on UASP gadget it would enable stream support even for the command endpoint which must not have stream support enabled. In fact, this change is fixing the bug introduced by commit a59d6b9 (usb: gadget: add streams support to the gadget framework) which was caught when testing UASP gadget with dwc3 driver. Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19usb: gadget: mv_udc: rewrite queue_dtd according to specNeil Zhang
Rewrite function queue_dtd according to ChipIdea's reference manual. Remove all unnecessary logic, it will enhance the performance. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-19usb: gadget: mv_udc: fix readl errorNeil Zhang
readl expected 'const volatile void *' as the argument. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15Merge branch 'at91/defconfig' into next/cleanupOlof Johansson
2011-12-13Merge branch 'for-next/gadget' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu() usb: renesas_usbhs: add force packet remove method usb: renesas_usbhs: care usb_hcd_giveback_urb() status usb: renesas_usbhs: add usbhsh_is_running() usb: renesas_usbhs: disable attch irq after device attached usb: renesas_usbhs: care pipe sequence usb: renesas_usbhs: add usbhs_pipe_attach() method usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case usb: renesas_usbhs: modify device attach method usb: renesas_usbhs: pop packet when urb dequeued usb: renesas_usbhs: add lost error value when enqueue usb: gadget: mv_udc: replace some debug info usb: gadget: mv_udc: refine suspend/resume function usb: gadget: mv_udc: refine the clock relative code usb: gadget: mv_udc: disable ISR when stopped usb: gadget: mv_udc: add otg relative code usb: gadget: Use kcalloc instead of kzalloc to allocate array usb: renesas_usbhs: remove the_controller_link usb: renesas_usbhs: add test-mode support usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable. ...
2011-12-12Merge branch 'for-next/dwc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits) usb: dwc3: ep0: fix for possible early delayed_status usb: dwc3: gadget: fix stream enable bit usb: dwc3: ep0: fix GetStatus handling (again) usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request usb: dwc3: use correct hwparam register for power mgm check usb: dwc3: omap: move to module_platform_driver usb: dwc3: workaround: missing disconnect event usb: dwc3: workaround: missing USB3 Reset event usb: dwc3: workaround: U1/U2 -> U0 transiton usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs() usb: dwc3: ep0: handle delayed_status again usb: dwc3: ep0: push ep0state into xfernotready processing usb: dwc3: fix sparse errors usb: dwc3: fix few coding style problems usb: dwc3: move generic dwc3 code from gadget into core usb: dwc3: use a helper function for operation mode setting usb: dwc3: ep0: don't use ep0in for transfers usb: dwc3: ep0: use proper endianess in SetFeature for wIndex usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX usb: dwc3: omap: add multiple instances support to OMAP ...
2011-12-12usb: gadget: storage: release superspeed descriptors.Yu Xu
Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu <yuxu@marvell.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: dwc3: always compile gadget side tooFelipe Balbi
We can decide in runtime if that will be used or not. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: mv_udc: replace some debug infoNeil Zhang
replace some debug info, make it easy to use. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: mv_udc: refine suspend/resume functionNeil Zhang
This patch impletments system suspend/resume functions for Marvell otg controller. If OTG is enabled, OTG driver will do most of the work. If not, we will check clock gating. If clock gating is enabled, the UDC will be start/stop automatically. If not, UDC will be start/stop in suspend/resume functions. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: mv_udc: refine the clock relative codeNeil Zhang
Split the clock relative code from clock gating solution. Then we can remove some duplicate code, make the code more clean. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: mv_udc: disable ISR when stoppedNeil Zhang
When device is stopped, there is no need to handle ISR. Especially when otg switch to HOST mode. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: mv_udc: add otg relative codeNeil Zhang
Add otg relative code, make it possible to switch between host and device. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: Use kcalloc instead of kzalloc to allocate arrayThomas Meyer
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Michal Nazarewicz <[4]mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: rename usb_gadget_driver::speed to max_speedMichal Nazarewicz
This commit renames the “speed” field of the usb_gadget_driver structure to “max_speed”. This is so that to make it more apparent that the field represents the maximum speed gadget driver can support. This also make the field look more like fields with the same name in usb_gadget and usb_composite_driver structures. All of those represent the *maximal* speed given entity supports. After this commit, there are the following fields in various structures: * usb_gadget::speed - the current connection speed, * usb_gadget::max_speed - maximal speed UDC supports, * usb_gadget_driver::max_speed - maximal speed gadget driver supports, and * usb_composite_driver::max_speed - maximal speed composite gadget supports. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: replace usb_gadget::is_dualspeed with max_speedMichal Nazarewicz
This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: drop dependency for mod_gadgetKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: mass_storage: support multi-luns with different logic block sizeYuping Luo
With Peiyu's patch "gadget: mass_storage: adapt logic block size to bound block devices" (http://www.spinics.net/lists/linux-usb/msg50791.html), now mass storage can adjust logic block size dynamically based on real devices. Then there is one issue caused by it, if two luns have different logic block size, mass storage can't work. Let's check the current software flow: 1. get_next_command(): call received_cbw(); 2. received_cbw(): update common->lun = cbw->Lun, but common->curlen is not updated; 3. do_scsi_command(): in READ_X and WRITE_X commands, common->data_size_from_cmnd is updated by common->curlun->blkbits; 4. check_command(): update common->curlun according to common->lun As you can see, the step 3 uses wrong common->curlun, then wrong common->curlun->blkbits. If the two luns have same blkbits, there isn't issue. Otherwise, both will fail. This patch moves the common->curlun update to step 1, then make sure step 3 gets right blkbits and data_size_from_cmnd. Cc: Peiyu Li <peiyu.li@csr.com> Signed-off-by: YuPing Luo <yuping.luo@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12USB: ci13xxx_udc: handle controllers with less than 16 EPsMarc Kleine-Budde
The ci13xxx_udc driver checks the number of endpoints in the udc controller, however some routines expect that the hardware has 16 bidirectional endpoints. This patch improves the driver to work on controllers with less than 16 endpoints like the udc controller found on freescale's mx23 and mx28. Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12USB: ci13xxx_udc: make suspend and resume in gadget driver optionalMarc Kleine-Budde
Some gadget drivers don't implement suspend and/or resume functions. Instead of changing the gadget drivers, make suspend and resume in ci13xxx_udc (following other udc drivers) optional. Tested-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-11-29ARM: at91/udc: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29usb: gadget: fsl_udc: fix dequeuing a request in progressLi Yang
The original implementation of dequeuing a request in progress is not correct. Change to use a correct process and also clean up the related functions a little bit. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: fsl_mxc_udc.c: Remove compile-time dependency of MX35 SoC typeFabio Estevam
In order to support multiple SoC kernel image, compile-time dependency on a specific SoC type should be avoided. fsl_udc_clk_finalize is already protected by cpu_is_mx35(), so remove the compile-time check for CONFIG_SOC_IMX35. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: fsl_mxc_udc.c: Fix build issue by including missing header fileFabio Estevam
Fix the following build error: CC [M] drivers/usb/gadget/fsl_mxc_udc.o drivers/usb/gadget/fsl_mxc_udc.c: In function 'fsl_udc_clk_finalize': drivers/usb/gadget/fsl_mxc_udc.c:98: error: implicit declaration of function 'readl' drivers/usb/gadget/fsl_mxc_udc.c:100: error: implicit declaration of function 'writel' This error is caused by the follwing commit: (16fcb63: arm/imx: remove mx31_setup_weimcs( ) from mx31.h) ,which removed '#include <linux/io.h>' from mx31.h. fsl_mxc_udc.c includes <mach/hardware.h>, which in turns includes mx31.h, so that's the reason fsl_mxc_udc.c built fine previously. Instead of relying on the indirect inclusion of the linux/io.h header file, include it directly in fsl_mxc_udc.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29USB: fsl_udc_core: use usb_endpoint_xfer_isoc to judge ISO XFERPeter Chen
Some ISO gadgets, like audio, has SYNC attribute as well as USB_ENDPOINT_XFER_ISOC for their bmAttributes at ISO endpoint descriptor. So, it needs to use usb_endpoint_xfer_isoc to judge ISO XFER. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: udc: Fix gadget driver's speed check in various UDC driversMichal Nazarewicz
Several UDC drivers had a gadget driver's speed sanity check of the form of: driver->speed != USB_SPEED_HIGH or: driver->speed != USB_SPEED_HIGH && driver->speed != USB_SPEED_FULL As more and more gadget drivers support USB SuperSpeed, driver->speed may be set to USB_SPEED_SUPER and UDC driver should handle such gadget correctly. The above checks however fail to recognise USB_SPEED_SUPER as a valid speed. This commit changes the two checks to: driver->speed < USB_SPEED_HIGH or: driver->speed < USB_SPEED_FULL respectively. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29usb: gadget: fix g_serial regressionRobert Jarzmik
Commit "usb: gadget: use config_ep_by_speed() instead of ep_choose()" broke g_serial in "non ACM nor OBEX" mode. Apply a trivial fix on usb endpoints discovery. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-28usb: convert drivers/usb/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/usb/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-29 15:22:54 +0000