summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
AgeCommit message (Collapse)Author
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-10-31DMA-API: usb: use new dma_coerce_mask_and_coherent()Russell King
Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-31DMA-API: usb: use dma_set_coherent_mask()Russell King
The correct way for a driver to specify the coherent DMA mask is not to directly access the field in the struct device, but to use dma_set_coherent_mask(). Only arch and bus code should access this member directly. Convert all direct write accesses to using the correct API. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-24Merge tag 'usb-for-v3.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.13 Final conversions to configfs for mass storage, acm_ms, and multi gadgets. MUSB should now work out of the box on AM335x-based boards (beagle bone white and black) with DMA thanks to Sebastian's work. We can now enable VERBOSE_DEBUG on builds of drivers/usb/gadget/ by selecting CONFIG_USB_GADGET_VERBOSE. s3c-hsotg got quite a few non-critical fixes but also learned a few new tricks (isochronous transfers, multi count support). The Marvel USB3 Controller driver got a memory leak fix. devm_usb_get_phy() learned not to return NULL, ever. Other than these patches, we have the usual set of cleanups ranging from removal of unnecessary *_set_drvdata() to using SIMPLE_DEV_PM_OPS. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: Remove unnecessary semicolonsJoe Perches
These aren't necessary after switch and if blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-11usb: dwc3: core: use pm_runtime_put_sync() on removeFelipe Balbi
We are going to disable runtime_pm and we're removing the driver, we must disable the device now. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-01usb: dwc3: Remove additional delay of 100ms when resumingVivek Gautam
This delay got introduced in: "7415f17 usb: dwc3: core: add power management support" which reflected similar code in dwc3_core_soft_reset() function. However, originally the delay of 100ms in dwc3_core_soft_reset() was meant to assist USB2PHY and USB3PHY reset, not for usb_phy_init() sequence. We should get rid of this delay, since things will still work fine without this. Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-01usb: dwc3: Remove redundant pci_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-29Merge 3.12-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26usb: dwc3: add support for MerrifieldDavid Cohen
Add PCI id for Intel Merrifield Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25usb: dwc3: Remove redundant pci_set_drvdataSachin Kamat
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17usb: dwc3: gadget: avoid memory leak when failing to allocate all epsDavid Cohen
If dwc3_gadget_init_endpoint() fails after allocate some of the eps, we need to free their memory to avoid leak. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: remove extcon dependencyHeikki Krogerus
It is required by the OMAP glue driver, but it already depends on it. The core driver should not depend on it. This will allow the use of the PCI glue driver again. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-17usb: dwc3: pci: add support for BayTrailHeikki Krogerus
Add PCI id for Intel BayTrail. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-03Merge tag 'char-misc-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here is the big char/misc driver pull request for 3.12-rc1 Lots of driver updates all over the char/misc tree, full details in the shortlog" * tag 'char-misc-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (62 commits) drivers: uio: Kconfig: add MMU dependancy for UIO drivers: uio: Add driver for Humusoft MF624 DAQ PCI card drivers: uio_pdrv_genirq: use dev_get_platdata() drivers: uio_pruss: use dev_get_platdata() drivers: uio_dmem_genirq: use dev_get_platdata() drivers: parport: Kconfig: exclude h8300 for PARPORT_PC drivers: misc: ti-st: fix potential race if st_kim_start fails Drivers: hv: vmbus: Do not attempt to negoatiate a new version prematurely misc: vmw_balloon: Remove braces to fix build for clang. Drivers: hv: vmbus: Fix a bug in the handling of channel offers vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq() VMCI: Add support for virtual IOMMU VMCI: Remove non-blocking/pinned queuepair support uio: uio_pruss: remove unnecessary platform_set_drvdata() parport: amiga: remove unnecessary platform_set_drvdata() vme: vme_vmivme7805.c: add missing __iomem annotation vme: vme_ca91cx42.c: add missing __iomem annotation vme: vme_tsi148.c: add missing __iomem annotation drivers/misc/hpilo: Correct panic when an AUX iLO is detected uio: drop unused vma_count member in uio_device struct ...
2013-08-27usb: dwc3: Remove duplicate inclusion of otg.hSachin Kamat
otg.h header file was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-14usb: dwc3: core: cope with NULL pdataFelipe Balbi
if pdata is a NULL pointer we could cause a kernel oops when probing the driver. Make sure to cope with systems which won't pass pdata to the driver. Tested-by: Paul Zimmerman <paulz@synopsys.com> Reported-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-09Merge branch 'nop-phy-rename' into nextFelipe Balbi
Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy-generic.c
2013-08-09usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceivSebastian Andrzej Siewior
The "nop" driver isn't a do-nothing-stub but supports a couple functions like clock on/off or is able to use a voltage regulator. This patch simply renames the driver to "generic" since it is easy possible to extend it by a simple function istead of writing a complete driver. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-05usb: dwc3: use extcon fwrk to receive connect/disconnectKishon Vijay Abraham I
Modified dwc3-omap to receive connect and disconnect notification using extcon framework. Also did the necessary cleanups required after adapting to extcon framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-08-02usb: dwc3: pci: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. Unnecessary CONFIG_PM ifdefs are removed. drivers/usb/dwc3/dwc3-pci.c:215:12: warning: 'dwc3_pci_suspend' defined but not used [-Wunused-function] drivers/usb/dwc3/dwc3-pci.c:224:12: warning: 'dwc3_pci_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-31usb: dwc3: use dev_get_platdata()Felipe Balbi
Use the wrapper function for retrieving the platform_data instead of accessing dev->platform_data directly. While at that also make change 'node' initialization to use the dev pointer. Inspired-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: core: modify IO memory resource after deferred probe completesIvan T. Ivanov
When deferred probe happens driver will try to ioremap multiple times and will fail. Memory resource.start variable is a global variable, modifications in this field will be accumulated on every probe. Fix this by moving the above operations after driver hold all required PHY's. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: ep0: don't change to configured state too earlyFelipe Balbi
before changing to configured state, we need to wait until gadget driver has had a chance to process the request. In case of USB_GADGET_DELAYED_STATUS, that means we need to defer usb_gadget_set_state() until the upcoming usb_ep_queue(). Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: ep0: only change to ADDRESS if set_config() succeedsFelipe Balbi
In case we're switching back to USB_STATE_ADDRESS from USB_STATE_CONFIGURED (if host sends a set configuration command for configuration zero), we should only switch if the request is successfully processed by the gadget driver. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: fix typo in comment of dwc3_epHuang Rui
Change intervall into interval. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: introduce dwc3_process_event_bufFelipe Balbi
in order to make our IRQ handler thread easier to read, we re-factor the inner loop to a separate function. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: rename dwc3_process_event_bufFelipe Balbi
that function isn't really processing any event buffer, rather just checking whether it contains events to be processed. Due to that reason, we're reaning it to dwc3_check_event_buf() instead. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: get rid of IRQF_ONESHOTFelipe Balbi
We can make use of bit 31 of the GEVNTSIZ(n) registers to mask/unmask interrupts from that particular interrupter. With that feature, we can easily drop IRQF_ONESHOT from our driver which makes it possible to properly change IRQ priorities when using RT patchset *and* it allows us to make use of the scheduler to choose the proper time to handle this IRQ thread. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: core: introduce and use macros for Event Size registerFelipe Balbi
That register has more than just the event buffer size; we can also mask and unmask that particular interrupter on bit 31 of that register. In this patch we introduce the necessary macros and make sure to use the new macros while also making sure we mask interrupts during driver removal. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: don't enable LPM earlyFelipe Balbi
LPM is enabled in Connection Done interrupt, there's no need to enable it early. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: core: don't redefine DWC3_DCFG_LPM_CAPFelipe Balbi
the macro DWC3_DCFG_LPM_CAP was defined twice. This patch just removes one of the definitions, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: add a debugging print when initializing endpointsFelipe Balbi
that way we get debugging information when enabling verbose debug of the driver. It will be no-op otherwise. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: move direction setting upFelipe Balbi
no functional changes, just grouping dep initialization. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: move debugging print aroundFelipe Balbi
by moving that dev_vdbg() to the internal __dwc3_gadget_ep_enable() we get the print even when enable ep0, which calls the internal function directly. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: core: switch over to devm_ioremap_resource()Felipe Balbi
use the new devm_ioremap_resource() on core.c Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: omap: switch over to devm_ioremap_resource()Felipe Balbi
use the new devm_ioremap_resource on dwc3-omap.c Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: drop dwc3 manual phy controlFelipe Balbi
Recent versions of the core, can suspend and resume the PHYs automatically, so we don't need to fiddle with dwc3's Global PHY registers at all. On versions prior to 1.94a this patch will mean that we will never ask dwc3 to suspend the PHY. This is an acceptable behavior or such old versions of the core, specially considering that the only chip known to have a version prior to 1.94a was OMAP5 ES1.0 and that's not supported in mainline kernel, because it was just a test spin of OMAP5. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: adapt to use dr_mode device tree helperRuchika Kharwar
This patch adapts the dwc3 to use the device tree helper "of_usb_get_dr_mode" for the mode of operation of the dwc3 instance being probed. [ balbi@ti.com : make of_usb_get_dr_mode() conditional on dev->of_node and let pdata pass dr_mode too ] Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: core: switch to snps,dwc3Felipe Balbi
all other drivers using Synopsys IPs with DT have a compatible of snps,$driver, in order to add consistency, we are switching over to snps,dwc3 but keeping synopsys,dwc3 in the core driver to maintain backwards compatibility. New DTS bindings should NOT use synopsys,dwc3. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: make maximum-speed a per-instance attributeFelipe Balbi
in order to allow different instances of the core work in different maximum speeds, we will move the maximum_speed module_parameter to both DeviceTree (making use the new maximum-speed DT property) and platform_data. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: let non-DT platforms pass tx-fifo-resize flag;Felipe Balbi
in case we're not in a DT boot, we should still be able to tell the driver how to behave. In order to be able to pass flags to the driver, we introduce platform_data structure which the core driver should use. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: switch to GPL v2 onlyFelipe Balbi
This is a Linux-only driver which makes use of GPL-only symbols. It makes no sense to maintain Dual BSD/GPL licensing for this driver. Considering that the amount of work to use this driver in any different operating system would likely be as large as developing the driver from scratch and considering that we depend on GPL-only symbols, we will switch over to a GPL v2-only license. Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: clean up redundant parameter commentHuang Rui
@list is not as a parameter of dwc3_event_buffer, so remove it in comments. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: gadget: don't request IRQs in atomicFelipe Balbi
We cannot request an IRQ with spinlocks held as that would trigger a sleeping inside spinlock warning. Cc: <stable@vger.kernel.org> # v3.10 Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29usb: dwc3: make glue layers selectableFelipe Balbi
Glue layers are starting to have separate requirements. For example, OMAP's glue layer is starting to use extcon framework which no one else needs. In order to make it clear the proper dependencies, we are now allowing glue layers to be selectable so that each glue layer can list their own dependencies without messing with the core IP driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-15usb: dwc3: USB_DWC3 should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `dwc3_free_one_event_buffer': drivers/usb/dwc3/core.c:132: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `dwc3_alloc_one_event_buffer': drivers/usb/dwc3/core.c:154: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `dma_set_coherent_mask': include/linux/dma-mapping.h:93: undefined reference to `dma_supported' drivers/built-in.o: In function `dwc3_free_trb_pool': drivers/usb/dwc3/gadget.c:407: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2693: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `dwc3_alloc_trb_pool': drivers/usb/dwc3/gadget.c:391: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2598: undefined reference to `dma_alloc_coherent' drivers/usb/dwc3/gadget.c:2667: undefined reference to `dma_free_coherent' drivers/usb/dwc3/gadget.c:2674: undefined reference to `dma_free_coherent' drivers/usb/dwc3/gadget.c:2678: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-15usb: dwc3: fix the error returned with usb3_phy failureRuchika Kharwar
When there is an error with the usb3_phy probe or absence, the error returned is erroneously for usb2_phy. Cc: <stable@vger.kernel.org> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-15usb: dwc3: fix wrong bit mask in dwc3_event_typeHuang Rui
Per dwc3 2.50a spec, the is_devspec bit is used to distinguish the Device Endpoint-Specific Event or Device-Specific Event (DEVT). If the bit is 1, the event is represented Device-Specific Event, then use [7:1] bits as Device Specific Event to marked the type. It has 7 bits, and we can see the reserved8_31 variable name which means from 8 to 31 bits marked reserved, actually there are 24 bits not 25 bits between that. And 1 + 7 + 24 = 32, the event size is 4 byes. So in dwc3_event_type, the bit mask should be: is_devspec [0] 1 bit type [7:1] 7 bits reserved8_31 [31:8] 24 bits This patch should be backported to kernels as old as 3.2, that contain the commit 72246da40f3719af3bfd104a2365b32537c27d83 "usb: Introduce DesignWare USB3 DRD Driver". Cc: <stable@vger.kernel.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 00:27:06 +0000